its depend on what your interface connection, wireless connection and lan connection need diferent type of queue .. depend n what type limiting u want .. limiting on one workstation can be different with limiting on group

@normis sorry......ive got my web-proxy finally...! :) @normis can you show how to blok everything exepct port 80.....? ive done this: 1. chain=forward ; connect-state=invalid ; action=drop 2. chain=forward ; in-interface=wan ; connect-state=established ; action=accept 3. chain=forward ; in-interfa...

http://www.mikrotik.com/docs/ros/2.8/ap ... ng1|11.2.4

the problem when i use load balanching i can use both bandwidth at the same time

Thank you very much andrew, my main purpose with so many natting is that i wish different client would have different ip. such as 10.0.0.2 would go to xx.xx.xx.116, 10.0.0.3 would go to xx.xx.xx.118. That's my main purpose. What i see from the dns cache is that the dns of mikrotik is caching and do...

@dannyboy i've done this and its work: rule forward: add src-address=10.x.x.x/16 protocol=tcp dst-port=80! action=drop/reject it means that all port except port 80 will be drop/reject...... i think blocking the port is more effesiens more than have to block by the name of the p2p because more p2p p...

Hi , i will try to make it clearly , when i was using 2.8 i hat a src nat rule and in that rule i added this config ip firewall src-nat> add action=nat to-src-address=x1.x23.x14.xx to-s rc-port=0-65535 src-address=0.0.0.0/0 dst-address=0.0.0.0/0 protocol=all the problem is that in 2.9 it doesn't wo...

i think it will be more easyer to answer if you explaint how is the topology of your network and your configuration right know ..

may i know what your mikrotik configuration right now, and what ver u used .. basicly to do that u only need to put your ip addres from your dvb at mikrotik and put def gateway tou your lease line, just make sure that your leased line provider can allow to pass your dvb network.

ups sory max .. the file was there .. i missing on las number .. thanks

one question, how to input subnet with sample : 0.0.0.0/24 is have subnet 255.255.255.0 and how about this : 0.0.0.0/29 ; 0.0.0.0/28; 0.0.0.0/30; 0.0.0.0/32 because i wanna blok all subnet except Ip register on my subnet to go to internet. Thanks 0.0.0.0/29 = 255.255.255.248 0.0.0.0/28 = 255.255.25...

Try this

/ ip firewall dst-nat
add in-interface=Ether1 dst-address=:80 protocol=tcp action=redirect \
to-dst-address=203.74.221.82 to-dst-port=8080 comment="" disabled=no

Here is another link to download the list

http://z15.zupload.com/download.php?fil ... epath=2059

Thanks Robert for share your work

_______________________________________________________


The Link r not worked, is there any one who have another link that i can donload

I have mikrotik 2.8.26 that connected to two ISP, one use VSAT and the orther use Wireless. How to setup mikrotik so my client can use this two ISP bandwidth, how is the rule and the route .. -- ISP A 128 Kbps | Mikrotik -- Client | -- ISP B 256 Kbps

what kind of error report while you cannot login to yahoo and yahoo messenger

try to mangle the traffik using : /ip firewall mangle add src-address=192.168.0.2/32 action=passtrough mark-connection=local-con do the same way with another ip for your komp, then close with : /ip firewall mangle add connection=local-con action=accept flow-connection=local use the same as pcq examp...