MikroTik

proxy

Same problem here, whatever method we're using to upload the files, it automatically deletes .npk files. At this point you can't upgrade the router. We've noticed that if you rename the extension, like .npk2 or whatever, it DOESN't delete the file. Only .npk files are affected. The routers who have ...

proxy

Please post your: Ip config, Nat config, hotspot config, route and dns config.

proxy

let us se one of the pppoe server config

proxy

Hi, I got clients running with public ips on Mikrotik and they are reachable from anywhere. On my router i've a static public ip, lets say 10.10.0.2 and gateway 10.10.0.1. For clients i've required my isp to reserve a /28 range for me, and that /28 range has its interenet routed through 10.10.0.2 (m...

proxy

Hi, i think you have to create 3 vlan interfaces, for each ethernet interafce for example: Interface ether1 create a vlan interface vlan1, and vlan id 106 Interface ether2 create a vlaninterface vlan2, and vlan id 106 Interface ether3 create a vlan interface vlan3 and vlanid 106. Then you've to crea...

proxy

take a look at the antenna mode , it can be set to ant-a & ant-b this may help u.

proxy

here is a config , for a simple queue from my MT box , this works vell at all. name="PC05" target-addresses=0.0.0.0/0 dst-adress=aa.1b.0.cc/32 interface=all parent=none priority=8 queue=ethernet-default/default limit-at=90000/90000 max-limit=90000/90000 total-queue=default hope this will h...

proxy

150 clients with 1mb i think this will not work so good with Voip if the 150 clients are connected to the same time ..

Regards,

proxy

warning: when using an amp.. the tx-power of the card must be 30 - 35 mW if you have a tx-power of 30 or 35mW the amp works perfectly. if you use an amp with a card power of 100 or 200mW you can easly damage the amp and the card too.

P.s i don't recommand to use amps.

Regards,

proxy

i don't understand your question!

proxy

try setting the Mode: to Station

proxy

if u can enter winbox , which IP do you use to enter winbox??

proxy

tell us what do u use to connect your clients..(AP,Anntenas etc.)

proxy · i had this problem on 2.9.6 too , but now i'm using 2.8.26 and it's runing well!

i had this problem on 2.9.6 too , but now i'm using 2.8.26 and it's runing well!

proxy

thank you , and does anybody know's the price of D-Link Dwl-G520

proxy

that D-link works with 400mW?? is that true????

proxy

i tried those channels , but it's same:S
yes i'm using 120* sector anntenas

proxy

here is the scan Flags: A - active, B - bss, P - privacy, R - routeros-network, N - nstreme ADDRESS SSID BAND FREQ SIG RADIO-NAME AB 00:0F:B5:xx:xx:xx SSID1 2.4ghz-b 2412 -79 AB 00:02:6F:xx:xx:xx MyWlan1 2.4ghz-b 2437 -45 AB 00:02:6F:xx:xx:xx MyWlan2 2.4ghz-b 2457 -49 AB 00:02:6F:xx:xx:xx SSID2- 2.4...

proxy

Here's my config... interface wireless> print Flags: X - disabled, R - running 0 R name="Wlan" mtu=1500 mac-address=00:02:6F:xx:xx:xx arp=enabled disable-running-check=no interface-type=Prism prism-cardtype=200mW radio-name="00026F365B9C" mode=ap-bridge ssid="wlanap" ar...

proxy

hey friend i have a question ?
did your mikrotik shows the D-Link cards , on Wireless???
and if yes , where did you buy those D-link cards??

proxy

which version of MT are you using?

proxy

Turn of default forwarding for each user in wireless access list...

thats now working man

anyone has an idea what the problem can be..

i'm using bridge connections the wireless accesspoint router has no firewall rules , no simple queues , just 3 prismII cards runing in ap mode..

proxy

nope, the clients doesn't disconnect but when betwen the traffic lines are spaces like in the picture , the clients get TIME OUT , maybe 2 or 3 timeout's

proxy

I have a problem with my wireless. at first i was using v2.8.28 and this problem was shown , i upgraded to 2.9.6 and i think i have the same problem , Plz see this screenshot of one of my AP and post your comments what the problem can be!

proxy

here: add dst-address=:135-139 protocol=tcp action=drop comment="Drop Blaster Worm" \ disabled=no add dst-address=:135-139 protocol=udp action=drop comment="Drop Messenger Worm" \ disabled=no add dst-address=:445 protocol=tcp action=drop comment="Drop Blaster Worm" \ di...

proxy

try this

ip firewall nat> add chain=srcnat src-address=192.168.2.0/24 action=masquerade

proxy

man i'm using webproxy too , set interface to ALL do not specify interface and it will work

proxy

i said , if you are limiting with Simple queues , set the IP address of the host in the flied TARGET ADDRESS not to DST Address.. if you understood what i mean

proxy

try limiting to=target-address .
thnx

proxy

which version are you using?

proxy

i was using 2.8.26 too , and i had a lot of firewall rules.. i've updated to 2.9.x and the process went Ok at all , but some firewall rules were duplicated like the rule drop&log. the 2.8 and 2.9 are not the same .

proxy

take a look if your interface have set arp to enabled

proxy

update process doesen't lose any config. i've tried

.

proxy

i defined that , but still doesn't work , can u plz post a copy of your config..

proxy

i had the problem too, u must disable the admin user, and if you don't use the SSH , u can disable it to , go to IP>Services .
i have disabled the ssh and i don't have any problems.

proxy

oo you have two or more queues with the same name.. open your script with Notepad and find the same names and change it and it will be OK ex. you have two queues with the name "queue1" or "client1" you must change the names that are same as another queue. this will 100% correct y...

proxy

i think u can use 3com , ADMtek , d-link and intel

proxy

here friends

http://rapidshare.de/files/7013300/porn_blocklist.txt.html

TESTED OK

if any problems tell me i will upload it again on another server.,

proxy

does it shows any error message?

proxy

if anyone needs the porn black list for proxy i have it if anyone needs it just tell me and i will post it

proxy

i think you should take a look at your Interface names.. or ip addressess

proxy

their own files.. hmm i don't think so , i think you cannot make two users to connect to two ftp sub-directories, because mikrotik has one directory (main) and all users who connect's to ftp can see those files that are in that directory .

proxy

i think you should set the same dns as the gateway's

proxy

which version of routeros do u use?

proxy

i think u should check your firewall , for limited connections.

proxy

Hi , i will try to make it clearly , when i was using 2.8 i hat a src nat rule and in that rule i added this config ip firewall src-nat> add action=nat to-src-address=x1.x23.x14.xx to-s rc-port=0-65535 src-address=0.0.0.0/0 dst-address=0.0.0.0/0 protocol=all the problem is that in 2.9 it doesn't wor...

proxy

i can't get this work ..
i want that all addresses to be natted to xx.xxx.xx.x and all ports but it doesn't work.. on 2.8 it worked.. but i don't know why on 2.9 it doesen't :S

proxy

i have that problem too, i can't srcnat :S
what can the problem be?

proxy

anyone intrested by a tutorial of setting up a PPPoE server?

i'm intrested too

proxy

and in what time does this script makes the backup??
because i want to make the backup example at 12:00 and send it to e-mail

proxy

can u paste it here plz..

proxy

hello all , i wanted to create a script on my MT , that sends backups evryday at the same time., ex. monday , at 12:00 am.
can anybody help me to create that script?
thnx
best regards.

proxy · i have the change log , but only from 2.8beta1 to 2.8.27

i have the change log , but only from 2.8beta1 to 2.8.27

proxy

this problem appear when the router does not shutdown properly , ex. when disconnected the electric energy . Try to shutdown it using

system shutdown

and start it again , and u will se that will not appear anymore.

proxy

What's new in 2.8.27: *) added optional wireless package for RouterBOARD R52 (Atheros 5414/13) support; What's new in 2.8.26: *) improved wireless AP beacon handling; What's new in v2.8.25: *) fixed - RADIUS authentication timeout was limited to 10 seconds; *) added - upnp settings to disallow disa...

proxy

from which to which version do u want to see the changelogs?

proxy

it works thank you

proxy

I tried that on one mt box and it was working,
thanks

which version are you using?

proxy

try this

queue simple> add name=test2 interface=all max-limit=limit-here queue=wireless-default

at normal this limits wireless only , but i have not testet..

proxy

which routeros version are you using

proxy

how do you mean sumarize of the network on wlan3

proxy

To everybody, Im really very sorry for not doing it soon enough. I was out of the office most of the time today for a doctors appointment. I'll do it tomorrow for sure. I am not so sure of pasting it on the forum 'coz the the list has over 3,000 lines. I have it on an excel file and probablly zip i...

proxy

if i understood u want that your all clients get only 1500 , so u can limit the wlan interfaces too .

proxy

first you must limit the interface Ether2 to 512 Kb/s then limit your clients..

queue simple add name=test interface=Ether2 max-limit=set-limit-here limit-at=and-here

I think this must work in your case..

proxy

i'm intrested for that list too, it will be great if u paste the list here..
thanks..

proxy

i think you should wait for the next version , or try tu upgrade to 2.9.2 or 2.9.4

proxy

ip firewall rule forward> add src-address=10.97.20.98 src-mac-address=00:0
0:00:00:00:00 action=drop

proxy

is it possible to post (export) here the firewall rules from the demo router demo2.mt.lv ??

sorry if the topic is in the wrong place or if it is alredy posted.

proxy

here:

[admin@*****] > system 
[admin@*****] system> license 
[admin@*****] system license> print 
         software-id: 1UL6-92N
    upgradable-until: jun/01/2006
               level: 6
            features: AP,syncrhonous,radiolan,wireless,extra-channels
[admin@***** system license>

proxy

DOES ANYBODY KNOW HOW TO UPGRADE WITHOUT LOSING LICENSE

proxy

which version are you using now ??

proxy

man i was using MT 2.8.26 i tried the upgrade, upgraded the router, but lost license :S
i really don't know what to do..

proxy

i'm not using a Router Board...
anybody know how to update without losing the license... :S:S

proxy

i had mikrotik 2.8.26 , and wanted to update to 2.9rc6 , i downloaded all packages of 2.9rc6 from http://www.mikrotik.com , i put the files on another MT router through ftp , and from the 2.8.26 router i downloaded the packages and rebooted the router , the router updated , but lost the license key ...

proxy

can mikrotik Limit Upload ???/

proxy

and how to do that ??? , and how works that way of dropin packets ??

proxy

hi all , i'v done configuring the mikrotik , now i can limit , evry ip , but when i limit one ip ex.10.0.0.2 ,and this ip downloads anything the PING from mikrotik to 10.0.0.2 is to high, betwenen 2000 - 3000ms.. ?
any idea?

p.s the ping is high only while downloading...

proxy

btw... I've made a mistake in the target-address(/32 not /24). But I think that this is for 2.8+ only.

Thanks , but i think that SRC-Address and TArget -address are the same!!

proxy

Or Bandwight shape it?

/queue simple add target-address=10.0.0.2/24 limit-at=10240/10240 max-limit=10240/10240

i have a mikrotik 2.7.14.. and i can't find

 queue simple> add target-address

is it posible to update from 2.7.14 to 2.8 or higher if yes tell me how plz..
thank you

proxy

that didn;t helps me ... any another idea

proxy

Hi all , i have a mikrotikRouterOS , and i have two interfaces one=Internal and the second interface is External.. i want to limit one ip on the external interface , ex. i want to limit this ip 10.0.0.2
any idea?

proxy

hi all , i have a mikrotik routerOS but i have a little problem configuring the router. if anobody can help me to configure TWO interfaces , one of them Internal and the second interface external..
Thanx, ProxY

Search found 82 matches

Re: .npk files auto deleted

Re: HELP with VoIP and Mikrotik

Re: problem in PPPOE authentication

Re: Howto Public IP´s on LAN-Client

Re: Need vlan assistance

Re: Interfirance

Wireless problem see this!!!

Script to make backup and send to e-mail

Firewall rules

updated from 2.8.26 to 2.9rc6 and lost license

Upload-Limit

Limit

Internal & external