Community discussions

MikroTik App

Search found 1966 matches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 7
by InoX
Mon Aug 03, 2020 3:41 pm
Forum: RouterBOARD hardware
Topic: HEX POE problem
Replies: 8
Views: 3361

Re: HEX POE problem

Indeed 802.3af/at doesn't work with 12-24v.
by InoX
Mon Aug 03, 2020 2:01 pm
Forum: RouterBOARD hardware
Topic: HEX POE problem
Replies: 8
Views: 3361

Re: HEX POE problem

PoE in 802.3af/at
PoE in input Voltage 12-57 V (is not specified passive POE)
DC jack input Voltage 8-57 V
MicroUSB input Voltage 5-5 V
by InoX
Fri Jul 24, 2020 3:38 pm
Forum: General
Topic: Max Throughput of hEX RB750Gr3
Replies: 8
Views: 9350

Re: Max Throughput of hEX RB750Gr3

Correct, it's a iptv flux so it is pretty steady. Connection is pppoe with 1Gbps/500mbps. Can't test the full speed, no pc is connected to this router.
by InoX
Fri Jul 24, 2020 2:48 pm
Forum: General
Topic: Max Throughput of hEX RB750Gr3
Replies: 8
Views: 9350

Re: Max Throughput of hEX RB750Gr3

~15% cpu with ~250mbps upload, 30.000pps
No firewall, active fast track.
by InoX
Mon Apr 20, 2020 11:20 pm
Forum: Announcements
Topic: Winbox v3.23 released!
Replies: 60
Views: 49583

Re: Winbox v3.23 released!

Nothing's fixed
by InoX
Sun Mar 29, 2020 1:44 am
Forum: Wireless Networking
Topic: RB4011.......... How many Chains? [SOLVED]
Replies: 6
Views: 11680

Re: RB4011.......... How many Chains? [SOLVED]

Forum Guru
:lol:
by InoX
Mon Feb 10, 2020 10:08 pm
Forum: General
Topic: Rumor: routerboard OS now supports "traffic shaping"
Replies: 4
Views: 1613

Re: Rumor: routerboard OS now supports "traffic shaping"

That's funny.
What is the point anyway? Most of the traffic is encrypted.
by InoX
Wed Dec 18, 2019 6:28 pm
Forum: RouterBOARD hardware
Topic: How to add external antenna on hAP Light smips (RB-941-2nd)
Replies: 10
Views: 7091

Re: How to add external antenna on hAP Light smips (RB-941-2nd)

Nothing work reliable after 3 walls. Ad a second router.
by InoX
Tue Dec 03, 2019 8:17 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 622
Views: 162973

Re: ARM devices and NV2 protocol

After all this, is it now "safe" to build a network with mANTBox and arm .ac as clients?
I need to make a high speed ptmp 6 clients network.
by InoX
Tue Nov 12, 2019 10:41 pm
Forum: RouterBOARD hardware
Topic: RB3011 port flopping - bad design
Replies: 131
Views: 62023

Re: RB3011 port flopping - bad design

I also have the same problem and I already realized the suggested corrections. Mikrotik team, I hope they solve this problem, because in the last month I have changed several routers RB2011 to RB3011 and most of them present this problem. The solution was : Do not mix giga ethernet interfaces with ...
by InoX
Sun Aug 18, 2019 5:27 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

2019 antennas still a piece of crap
by InoX
Sun Aug 11, 2019 5:46 pm
Forum: Wireless Networking
Topic: Signals BAD after latest upgrade
Replies: 5
Views: 2067

Re: Signals BAD after latest upgrade

Choose superchannel and no country for maximum power.
by InoX
Sat Apr 20, 2019 11:45 pm
Forum: Virtualization
Topic: Replaced 5yr old x86 with CHR (less than impressed)
Replies: 14
Views: 8271

Re: Replaced 5yr old x86 with CHR (less than impressed)

I remember that Mikrotik recomends disable the HT, don't remember why but lower than real cpu usage might be the reason. More cores, less total cpu usage...
by InoX
Tue Apr 16, 2019 12:44 am
Forum: Wireless Networking
Topic: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]
Replies: 7
Views: 3244

Re: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]

what is happening around you, frequency usage, etc.
This will not resolve the main problem - signal to low.
by InoX
Mon Apr 15, 2019 6:05 pm
Forum: Wireless Networking
Topic: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]
Replies: 7
Views: 3244

Re: 3.6 Km Ptp Link -- bad RX ccq and BW [SOLVED]

1. check alignment
2. check Current Tx Power
by InoX
Sun Mar 24, 2019 7:55 pm
Forum: RouterBOARD hardware
Topic: LHG 60G rev 2?
Replies: 11
Views: 4324

Re: LHG 60G rev 2?

Do you think that a bare wire/piece of pcb can manage anything?
by InoX
Fri Mar 22, 2019 8:50 pm
Forum: General
Topic: LHG5 AC in N mode at 10 MHz
Replies: 5
Views: 1355

Re: LHG5 AC in N mode at 10 MHz

First generation AC didn;t worked in 5/10mhz.
by InoX
Mon Mar 18, 2019 12:17 am
Forum: General
Topic: IPTV who should pay?
Replies: 46
Views: 10929

Re: IPTV who should pay?

1TB/day in my case...
by InoX
Sun Mar 17, 2019 6:07 pm
Forum: General
Topic: IPTV who should pay?
Replies: 46
Views: 10929

Re: IPTV who should pay?

Its pretty hard to believe that ISPs who sells 1Gbps subscriptions will be affected by 5mbps of constant data usage.
I have 1Gbps for my company at 30$/mo and 500mbps at home for 15$/mo.
by InoX
Sun Mar 17, 2019 2:21 am
Forum: Scripting
Topic: Bypass mobile phones to different dhcp pool
Replies: 4
Views: 2041

Re: Bypass mobile phones to different dhcp pool

MIkrotik can't know which one is a phone so the easiest way is to make a virtual ap, with different ip address class and password.
by InoX
Sun Mar 17, 2019 12:01 am
Forum: General
Topic: IPTV who should pay?
Replies: 46
Views: 10929

Re: IPTV who should pay?

You can't limit less than what you have sold. Also a 1080p IPTV channel takes ~5mbps in my case. So what is he complaining about? If a provider can't offer 5mbps/client (but it is selling more) I'm sure is in the wrong business. Also those UK "streamers" are in fact in Spain, the sellers o...
by InoX
Tue Mar 12, 2019 1:03 am
Forum: Wireless Networking
Topic: MantBox with sxtq and lhg ac - Bad CCQ
Replies: 6
Views: 2308

Re: MantBox with sxtq and lhg ac - Bad CCQ

Isn't this your problem?
viewtopic.php?f=7&t=136002
It is solved in 6.44
I know, does he?
by InoX
Mon Mar 11, 2019 5:42 pm
Forum: Wireless Networking
Topic: MantBox with sxtq and lhg ac - Bad CCQ
Replies: 6
Views: 2308

Re: MantBox with sxtq and lhg ac - Bad CCQ

Isn't this your problem?
viewtopic.php?f=7&t=136002
by InoX
Thu Feb 28, 2019 6:46 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 622
Views: 162973

Re: ARM devices and NV2 protocol

nstreme will be ditched? Or is it allready?
by InoX
Tue Feb 26, 2019 7:22 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

Indeed.
by InoX
Sat Feb 09, 2019 5:44 pm
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 622
Views: 162973

Re: ARM devices and NV2 protocol

A sector with 15 clients a/n/40mhz and the one I've tested is old single core .ac. Under each picture you can find the protocol used. Sadly in 802.11 is not stable and clients gets a lot of disconnections so I'm sticking with nstreme. The conclusion is Mikrotik have lost speed in any protocol, a lo...
by InoX
Wed Feb 06, 2019 12:39 am
Forum: Wireless Networking
Topic: ARM devices and NV2 protocol
Replies: 622
Views: 162973

Re: ARM devices and NV2 protocol

A sector with 15 clients a/n/40mhz and the one I've tested is old single core .ac. Under each picture you can find the protocol used. Sadly in 802.11 is not stable and clients gets a lot of disconnections so I'm sticking with nstreme. The conclusion is Mikrotik have lost speed in any protocol, a lot...
by InoX
Fri Feb 01, 2019 11:52 pm
Forum: Wireless Networking
Topic: bcm4311 adapter + RB 951G-2HnD
Replies: 2
Views: 1008

Re: bcm4311 adapter + RB 951G-2HnD

Choose your country and manual tx power.
Wireless protocol 802.11.
After that if is still not working, choose a frequency.
by InoX
Sat Jan 05, 2019 8:36 pm
Forum: RouterBOARD hardware
Topic: RB4011 wireless performance?
Replies: 27
Views: 8855

Re: RB4011 wireless performance?

At this moment bad, we tested 3 Intel Based AC Laptops and both are only able to connect to 54 MBit..... Kind of seems "par" for Mikrotik with wireless devices. They release them and it takes several months and routerOS/firmwares before they start showing acceptable results. I went throug...
by InoX
Sun Dec 23, 2018 10:52 pm
Forum: General
Topic: Should MikroTik make more powerful antennas and wireless protocols in 2019?
Replies: 19
Views: 4705

Re: Should MikroTik make more powerful antennas and wireless protocols in 2019?

I believe it's all about money. Ubnt is in USA, it has more resources, more money and more know how. Mikrotik is a small company in a small country. The costs of developing such expensive systems might be overwhelming. Anyway I dont use ubnt anymore because of the failure rate which is at least 10 t...
by InoX
Tue Oct 23, 2018 11:29 pm
Forum: Wireless Networking
Topic: Nv2 High latency
Replies: 29
Views: 10195

Re: Nv2 High latency

Those pings are normal for nv2 and ptmp.
by InoX
Tue Oct 09, 2018 11:31 pm
Forum: Beginner Basics
Topic: no "home AP" mode in SXT Lite 2
Replies: 16
Views: 4846

Re: no "home AP" mode in SXT Lite 2

No, it's not.
by InoX
Tue Sep 11, 2018 3:21 pm
Forum: Announcements
Topic: v6.43 [current] is released!
Replies: 147
Views: 70812

Re: v6.43 [current] is released!

In 12 hours I had to reboot two times my RB951ui router to get internet working again after the upgrade.
Never happened this before the upgrade.
First time setup on LHG5 user admin can't be changed, you must make one more user and delete admin after. I never user admin as username.
by InoX
Tue Sep 11, 2018 3:16 pm
Forum: Wireless Networking
Topic: Discussion: LHG5 P2P - 25km - over sea
Replies: 16
Views: 7373

Re: Discussion: LHG5 P2P - 25km - over sea

You must consider that most likely provider has activated Airmax which is compatible only with ubnt products.
If is a hotspot, it should be disabled.
Otherwise LDF2 will be better than AG2.
You will get an ~10dbi improvement.
by InoX
Wed Sep 05, 2018 8:38 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

I will only buy LHGs.
by InoX
Tue Sep 04, 2018 11:00 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

Netter System SRL

str. Harghitei nr. 13

535400 Cristuru Secuiesc, jud. Harghita, RO

(+4) 0756 - 165 201

sales@mikrotik.ro
by InoX
Tue Sep 04, 2018 8:03 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

But the defective units are from you and they are defective because of you!
You should support this repairs not the seller.
The seller is dealing with MikroTik, not end user. This should be of no concern of how this is done.
The seller fuc*ed me.
Or you read posts selective?
by InoX
Tue Sep 04, 2018 3:15 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

But the defective units are from you and they are defective because of you!
You should support this repairs not the seller.
by InoX
Wed Aug 29, 2018 11:05 pm
Forum: Wireless Networking
Topic: how many device need for 300 concurrent wireless users?
Replies: 5
Views: 3059

Re: how many device need for 300 concurrent wireless users?

I would go for at least 5mbps/user not 100kbos...
by InoX
Wed Aug 29, 2018 3:14 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

They told me that mikrotik sent them replacement part and can send me to change it myself.
After that are not responding my emails anymore.
by InoX
Wed Aug 29, 2018 3:07 pm
Forum: RouterBOARD hardware
Topic: MikroTik NetMetal 5 with mini pciE + R11e-5HacD
Replies: 1
Views: 886

Re: MikroTik NetMetal 5 with mini pciE + R11e-5HacD

You need splitters. Some will say combiners but a splitter is also a combiner. You need 2 splitters at each antennas,one that will combine 2 H chains from the radio to the antenna and one more for the V chains. After that you need to configure 2 separate links and choose a method of bonding. Splitte...
by InoX
Sat Aug 18, 2018 4:25 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

"my distributor claims they refuse that"
by InoX
Fri Aug 17, 2018 10:04 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

In fact they are not.
by InoX
Fri Aug 17, 2018 2:10 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

Recognizing the problem does not fix the cracks . Now can you see the problem ? But sending new covers so we can replace them is a solution to the problem . Now can you see the problem ? When ubiquity had problems with cracking ToughCable, they replaced it. When almost all car industry had a airbag,...
by InoX
Thu Aug 16, 2018 10:56 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

My distributor said that they received entire batches with them already cracked an Mikrotik refuses to recognize the fabrication issue.
Mikrotik staff should be ashame for this kind of scamming practices.
by InoX
Thu Aug 16, 2018 9:03 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

I'm asking Mikrotik to start a replace or repair program.
It's stupid to replace units after one year of use.
What about our work and our money?
This suck and Mikrotik should repair these units for free because is responsible for this issue.
by InoX
Thu Aug 16, 2018 4:06 pm
Forum: Wireless Networking
Topic: Disconnected, control frame timeout
Replies: 3
Views: 4437

Re: Disconnected, control frame timeout

It seems you can't read a picture. All information is there.
As you can see I'm a long time member on the forum, I know to change some channels...
by InoX
Mon Aug 13, 2018 7:54 pm
Forum: General
Topic: Bridge port received packet with own address as source address, probably loop
Replies: 9
Views: 10226

Re: Same MAC on bridge, ether and vlan

Don't worry is not a loop. Is a mikrotik bug introduced ~ 2 years ago that appears random on many models. It is hapening to me on RB3001, RB100AHx2, POwerBox etc. It appears and disappears on its own with no configuration change.
by InoX
Sat Aug 11, 2018 10:13 pm
Forum: Wireless Networking
Topic: Disconnected, control frame timeout
Replies: 3
Views: 4437

Disconnected, control frame timeout

As you can see the link is now 5 days uptime but sometimes it has a lot of disconnects.
Any advise?
by InoX
Tue Jul 24, 2018 10:54 pm
Forum: Wireless Networking
Topic: miniPCI-e NV2?
Replies: 1
Views: 1025

Re: miniPCI-e NV2?

NV2 is not implemented in hardware but in software.
by InoX
Sun Jul 22, 2018 11:02 pm
Forum: General
Topic: SXTsq 5 ac very slow pairing
Replies: 2
Views: 1022

Re: SXTsq 5 ac very slow pairing

It could be Radar Detect.
If you have US version, you are stick with it.
For the rest of the world it can be disabled.
by InoX
Fri Jul 20, 2018 9:04 pm
Forum: RouterBOARD hardware
Topic: Capacitors in CCR1036 board
Replies: 7
Views: 4032

Re: Capacitors in CCR1036 board

Did you looked on the other side of the capacitors? It should be something between 100 - 470uF.
by InoX
Thu Jul 05, 2018 11:49 pm
Forum: RouterBOARD hardware
Topic: Cracked cover on RouterBOARD DISC Lite5
Replies: 61
Views: 18058

Re: Cracked cover on RouterBOARD DISC Lite5

The initial production batch did have an issue with the outer plastic shrinking at a different rate than the inside, causing cracks on the cover when there are big temperature changes. We have already fixed the issue in production a while ago. The units that show cracks like this are covered by war...
by InoX
Sun Jun 17, 2018 11:45 pm
Forum: Wireless Networking
Topic: Connecting QRT5 ac and LGH5 on a 16Km link? Is it possible?
Replies: 8
Views: 2626

Re: Connecting QRT5 ac and LGH5 on a 16Km link? Is it possible?

Distance: 16.0 Km (9.94 miles)
Free Space Path Loss: 131.223 dB
Theoretical signal level at TX: -67
Theoretical signal level at RX: -59
Link status: Unreliable

Use LHG5 XL.
by InoX
Sat Jun 16, 2018 10:53 pm
Forum: General
Topic: wAP AC: Every update fails
Replies: 7
Views: 1877

Re: wAP AC: Every update fails

I have to restore the device after every Update with netinstall.
by InoX
Fri Jun 15, 2018 8:08 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 114812

Re: Significant improvement for wireless Nv2 PtMP

“Telrad provides a software-defined solution. We don’t have to send anyone up the towers to replace equipment when there is an upgrade or change; we simply do a software upload – which is huge cost savings for the city,” added Joyce. Now that's really really funny. So they have invented software upl...
by InoX
Fri Jun 01, 2018 10:05 pm
Forum: Wireless Networking
Topic: interface wireless set compression=yes - does this work? [SOLVED]
Replies: 3
Views: 3689

Re: interface wireless set compression=yes - does this work? [SOLVED]

Compression is obsolete from a long time ago.
It's not present in winbox also.
by InoX
Sat May 26, 2018 12:57 am
Forum: RouterBOARD hardware
Topic: RB3011 - PoE-in
Replies: 1
Views: 1213

Re: RB3011 - PoE-in

It's easier to search than to post.
https://i.pinimg.com/originals/43/1b/5e ... 928b6b.jpg
by InoX
Thu Apr 05, 2018 12:06 am
Forum: Wireless Networking
Topic: QRT 5 PTP
Replies: 9
Views: 2524

Re: QRT 5 PTP

Here you go 11km link between 911 with 30dbi antennas and test between router and wireless station.
No hardware for iperf. Happy now?
by InoX
Mon Apr 02, 2018 2:36 am
Forum: Wireless Networking
Topic: QRT 5 PTP
Replies: 9
Views: 2524

Re: QRT 5 PTP

@Inox

150MBit TCP with QRT a/n (RB911g)???

Show it, we have a couple of them and about 10 for 5km shots!
Never see more then 80-90 MBits P2P with Mikrotik 802.11an

No difference 802.11 Nv2, nstream
up to 180mbps with 911G at 11km
The thing is if you test between boards, ~75mbps is what you get.
by InoX
Sat Mar 31, 2018 8:49 pm
Forum: Wireless Networking
Topic: QRT 5 PTP
Replies: 9
Views: 2524

Re: QRT 5 PTP

Some thinks from my side: 1. Add Security to this link by enabling WPA2 2. Set your Country, until this is not done you are possible sending in bands you are not allowed to, and with too much power. UBNT forum style help...useless . None of these will help you boost the speed. Your link should have...
by InoX
Wed Jan 03, 2018 11:12 pm
Forum: RouterBOARD hardware
Topic: RB SXT-5HPnD not keeping settings [SOLVED]
Replies: 10
Views: 3498

Re: RB SXT-5HPnD not keeping settings [SOLVED]

Do they lose some settings, or all of them? Is the device like from factory, when you reboot it? Possibly the Reset button has some water or corrosion and device thinks it is pressed (so it does a reset). You can use some PCB cleaner to clean it, or, if there is heavy corrosion, maybe some solderin...
by InoX
Mon Jan 01, 2018 10:03 pm
Forum: RouterBOARD hardware
Topic: Which MikroTik product for short PtP link?
Replies: 14
Views: 3419

Re: Which MikroTik product for short PtP link?

You can try with https://mikrotik.com/product/sxtsq_5_ac
Maybe link will achieve 300mbps.
by InoX
Fri Dec 29, 2017 1:59 am
Forum: General
Topic: Mikrotik - PLEASE - educate your vendors!
Replies: 10
Views: 2263

Re: Mikrotik - PLEASE - educate your vendors!

I don't think that you will ever found any international version in the US. So why are you trying?
Anyway it's not Mikrotik fault and your statement it's ridiculous.
by InoX
Wed Dec 27, 2017 5:10 pm
Forum: Beginner Basics
Topic: RB951G-2HnD - speed limit 280 Mbps
Replies: 3
Views: 3791

Re: RB951G-2HnD - speed limit 280 Mbps

RB951G-2HnD can route via pppoe over 800mbps with fasttrack in my case.
by InoX
Sun Dec 17, 2017 12:29 am
Forum: General
Topic: CCR1009 maxes out at 2gbps?
Replies: 26
Views: 6694

Re: CCR1009 maxes out at 2gbps?

SFP+ ports 1
by InoX
Tue Dec 12, 2017 2:00 am
Forum: RouterBOARD hardware
Topic: What is the mANT 19s maximum throughput and recommended number of cpes
Replies: 3
Views: 2065

Re: What is the mANT 19s maximum throughput and recommended number of cpes

I sugest not to connect more than 30 cpe's.
With 15 cpe traffic can go up tu 110mbps with NV2 in my case.
Uptime 241 days, so it's stable.
by InoX
Mon Dec 11, 2017 12:31 am
Forum: General
Topic: NetMetal 5's Quit working
Replies: 2
Views: 835

Re: NetMetal 5's Quit working

CCQ needs traffic. Did you tried to pass some traffic or you just sit and look at the screen?
-37 is to strong. I recommend -50...-55
All the radios where powered off before the antenna disconnection? If not, the amplifiers might be burned.
by InoX
Sat Dec 09, 2017 10:38 pm
Forum: General
Topic: CCR1009 maxes out at 2gbps?
Replies: 26
Views: 6694

Re: CCR1009 maxes out at 2gbps?

So the wan is sfp+ , how many LAN ports are you using for client traffic? If you are using 2 ports=2gbps
by InoX
Sun Dec 03, 2017 10:44 pm
Forum: RouterBOARD hardware
Topic: New SXTsq 5 ac and LHG 5 ac
Replies: 12
Views: 4182

Re: New SXTsq 5 ac and LHG 5 ac

And also an XL version of LHG5.
Also new product RBLHG-2nD https://www.mikrotik.ro/index.php?contr ... chment=258
by InoX
Fri Nov 17, 2017 1:50 am
Forum: General
Topic: what code for Metal G-52SHPacn
Replies: 9
Views: 1536

Re: what code for Metal G-52SHPacn

Why not use System -> Packages -> Check for updates?
by InoX
Wed Nov 08, 2017 1:51 am
Forum: Wireless Networking
Topic: quickMOUNT pro LHG Is no good
Replies: 2
Views: 1478

quickMOUNT pro LHG Is no good

It just can't hold the antenna in one place. You can move it with just two fingers. Anyone observed it?
Is build plastic over plastic, it has no chance to stick in one place. Maybe if you glue it after aiming is over.
by InoX
Wed Nov 08, 2017 1:39 am
Forum: RouterBOARD hardware
Topic: LHG 5 issues
Replies: 4
Views: 2154

Re: LHG 5 issues

It's not hard: gmeden Posts: 127 Joined: Mon Aug 06, 2007 4:07 am Reputation: 0 Location: Indiana, US For sure he has the US version. Also all LHG have L3. And now after visiting www.routerboard.com , as he should do, we can find the following: We have two versions available. RBLHG-5nD-US (USA) is f...
by InoX
Wed Nov 08, 2017 1:37 am
Forum: General
Topic: NetMetal 5 PtMP?
Replies: 5
Views: 1388

Re: NetMetal 5 PtMP?

Of course it can be used as ptmp. I have one with 13 clients (different types of RB's) and 307 days of uptime. Speeds get to 110mbps. But I'm using nv2 and signals are -40...-70.
by InoX
Mon Nov 06, 2017 3:10 pm
Forum: Wireless Networking
Topic: What is the point of an 802.11ac router with 10/100 ethernet?
Replies: 10
Views: 3372

Re: What is the point of an 802.11ac router with 10/100 ethernet?

You really, both of you, just don't get it.
I rest my case.
by InoX
Mon Nov 06, 2017 12:19 pm
Forum: Wireless Networking
Topic: What is the point of an 802.11ac router with 10/100 ethernet?
Replies: 10
Views: 3372

Re: What is the point of an 802.11ac router with 10/100 ethernet?

With AP in N mode and 15 clients speed can reach ~110mbps. In AC mode and AC clients it should reach more than that, so even one client can't reach more than 100mbps, more clients can reach more than 100mbps because all mikrotik AP's are gigabit.
by InoX
Thu Nov 02, 2017 11:37 pm
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 2576

Re: Dual chain enabled and no bandwith NV2

CCQ indicates interference. Why are you using 80Mhz for 130mbps? Test with 20Mhz and 40Mhz. It might work better.
by InoX
Tue Oct 31, 2017 10:06 pm
Forum: Beginner Basics
Topic: question about RB SXT not posted by moderation ?!
Replies: 2
Views: 1063

Re: question about RB SXT not posted by moderation ?!

Ask your question here...
by InoX
Sun Oct 29, 2017 1:24 am
Forum: Wireless Networking
Topic: DISAPPOINTED 10Km link+netmetal+CCQ>94%+650Mbps@80Mhz < 180Mbps Throughtput
Replies: 13
Views: 3885

Re: DISAPPOINTED 10Km link+netmetal+CCQ>94%+650Mbps@80Mhz < 180Mbps Throughtput

- check ethernet speed, must be 1gbps
- use 40mhz channel for start
- try multiple channels
- don't use less than 1ghz routerboard for speed test
- your signal is too strong, I recomment -45...-50
by InoX
Tue Oct 24, 2017 7:30 pm
Forum: Wireless Networking
Topic: DISAPPOINTED 10Km link+netmetal+CCQ>94%+650Mbps@80Mhz < 180Mbps Throughtput
Replies: 13
Views: 3885

Re: DISAPPOINTED 10Km link+netmetal+CCQ>94%+650Mbps@80Mhz < 180Mbps Throughtput

Maybe Mikrotik should ask Qualcomm to implement hardware btest for Mikrotik :lol:
And why not hardware accelerator for Winbox.
by InoX
Wed Oct 18, 2017 6:09 pm
Forum: Wireless Networking
Topic: 36 km Gigabit link
Replies: 17
Views: 4173

Re: 36 km Gigabit link

I'm interested in setting up a Gigabit link 1000 Mbps or as close to Gigabit as possible
It.s not even close.
by InoX
Mon Oct 16, 2017 12:19 am
Forum: Wireless Networking
Topic: 36 km Gigabit link
Replies: 17
Views: 4173

Re: 36 km Gigabit link

30dBm
...it's not what are we talking about.
by InoX
Sun Oct 15, 2017 8:13 pm
Forum: Wireless Networking
Topic: 36 km Gigabit link
Replies: 17
Views: 4173

Re: 36 km Gigabit link

Best solution is from another vendor https://www.ubnt.com/airfiber/airfiber5/
or 5X for less speed.
by InoX
Sun Oct 15, 2017 6:58 pm
Forum: Wireless Networking
Topic: omni to increase range of signal
Replies: 15
Views: 4056

Re: omni to increase range of signal

I've never seen a 15dbi antenna that worked better than 8dbi.
by InoX
Sun Oct 15, 2017 6:55 pm
Forum: Wireless Networking
Topic: merge 3 lines 200 mgbs each
Replies: 2
Views: 1213

Re: merge 3 lines 200 mgbs each

https://wiki.mikrotik.com/wiki/Manual:PCC
I've used 2 connection and worked. Now I have 1gbps and pcc is not nedded anymore.
by InoX
Mon Oct 09, 2017 8:59 pm
Forum: General
Topic: mikrotik 64x
Replies: 2
Views: 1562

Re: mikrotik 64x

There is already a x64 version. Use search and read the whole thread, there is a catch.
viewtopic.php?f=1&t=116621&hilit=x64+mikrotik
by InoX
Thu Oct 05, 2017 11:26 pm
Forum: General
Topic: hEX gigabit problem
Replies: 5
Views: 1469

Re: hEX gigabit problem

Using btest on the same devices you want to test stress the cpu because it has to generate all that traffic in such way it is not able to handle to much traffic. It's like trying to talk while you drink. It's hard. You should use btest through the devices you want to test, that means you have to hav...
by InoX
Fri Sep 29, 2017 1:36 pm
Forum: Wireless Networking
Topic: omni to increase range of signal
Replies: 15
Views: 4056

Re: omni to increase range of signal

He is using 2.4Ghz not 5Ghz.
A BaseBox 2 with dual pol omni would work much better.
by InoX
Wed Sep 27, 2017 4:12 pm
Forum: General
Topic: Why I am not using WinBox!
Replies: 29
Views: 6940

Re: Why I am not using WinBox!

Glasses might help...
by InoX
Mon Sep 25, 2017 11:11 pm
Forum: General
Topic: RB750Gr3 - Can be used as a 2 WAN Firewall ? [SOLVED]
Replies: 3
Views: 1714

Re: RB750Gr3 - Can be used as a 2 WAN Firewall ? [SOLVED]

Any mikrotik router can be used as 2 wan firewall.
by InoX
Fri Sep 15, 2017 12:40 am
Forum: Wireless Networking
Topic: sxt and mant
Replies: 3
Views: 1404

Re: sxt and mant

Mikrotik is not working good without nstreme or nv2 also signal is to low for that client. It will work better with nv2, also nv2 will keep it connected, with nstreme it will disconnect many times.
You should improve signal by changing SXTwith LHG. Is cheaper than SXT.
by InoX
Wed Aug 30, 2017 1:42 am
Forum: Wireless Networking
Topic: 2x2 MiMo 802.11 N on 900MHz
Replies: 19
Views: 5567

Re: 2x2 MiMo 802.11 N on 900MHz

...and what about night? How will the solar panels work?
by InoX
Mon Aug 28, 2017 12:09 am
Forum: General
Topic: Dynadish 5 + SXT 5 links and multicast problem
Replies: 4
Views: 1487

Re: Dynadish 5 + SXT 5 links and multicast problem

https://mikrotik.com/download
Download Extra packages corresponding your version, upload packet with drag and drop, restart.
by InoX
Sat Aug 26, 2017 4:01 pm
Forum: General
Topic: Dynadish 5 + SXT 5 links and multicast problem
Replies: 4
Views: 1487

Re: Dynadish 5 + SXT 5 links and multicast problem

Maybe multicast package can help.
by InoX
Sat Aug 26, 2017 3:55 pm
Forum: Wireless Networking
Topic: Link issues
Replies: 9
Views: 2067

Re: Link issues

Signal is too low. It will never work as it should. You have a problem if for 3km and dish signal is -77.
Also a stable link should have at least -65. -50 to -60 recomended for full speed also.
by InoX
Sun Aug 20, 2017 1:48 pm
Forum: Wireless Networking
Topic: Discussion: LHG5 P2P - 25km - over sea
Replies: 16
Views: 7373

Re: Discussion: LHG5 P2P - 25km - over sea

Wait for https://mikrotik.com/product/RBLHG-5HPnD-XL Even if you change at only one end, it will be a visible improvment. Calculator estimated link with 2 x RBLHG-5HPnD-XL : Distance: 25.1 Km (15.59 miles) Free Space Path Loss: 135.132 dB Theoretical signal level at TX: -59 Theoretical signal level ...
by InoX
Wed Aug 16, 2017 3:27 am
Forum: General
Topic: Fiber to the Desktop anyone?
Replies: 4
Views: 1666

Re: Fiber to the Desktop anyone?

Fiber indoor sounds like trouble if is not very well protected.
I wonder what kind of traffic those desktops are making, 10mbps average maybe? For me it's hard to believe 1gbps is not enough.
by InoX
Mon Aug 07, 2017 4:07 pm
Forum: Wireless Networking
Topic: Bonding Wireless
Replies: 18
Views: 12434

Re: Bonding Wireless

There was no problem, the links worked for about 3 years until water found a way inside and reset one sxt to default. It was a well known design flaw. Both links must be set up very good because the weakest will dictate the speed. LE It wont work in the lab also. Just use cables between the ports an...
by InoX
Mon Aug 07, 2017 3:56 pm
Forum: General
Topic: 340mbps with bonding
Replies: 7
Views: 4262

Re: 340mbps with bonding

You have already get an answer. If you don't understand the way that ospf works, maybe you should learn.
by InoX
Mon Aug 07, 2017 3:50 pm
Forum: Wireless Networking
Topic: Bonding Wireless
Replies: 18
Views: 12434

Re: Bonding Wireless

2xRB750GL or any mikrotik router with gigabit, 2xSXT+2xSXT and Balance-rr. Radios were all in bridge, no other configuration needed. Configurations are on the routers between the ports with radios. The radios were shielded and placed in the focal point of satellite dish antennas, it might not work w...
by InoX
Sun Aug 06, 2017 3:33 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 29942

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

AP is .ac but clients are .n, so it's N.
by InoX
Sun Aug 06, 2017 1:19 am
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 29942

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

My results are horible. From ~65mbps is down to 30mbps.
by InoX
Sat Aug 05, 2017 6:54 pm
Forum: Wireless Networking
Topic: Bonding experiment not working!
Replies: 7
Views: 2881

Re: Bonding experiment not working!

balance-rr did worked for me.
by InoX
Fri Aug 04, 2017 4:05 pm
Forum: Announcements
Topic: Wireless link calculator updated
Replies: 71
Views: 83287

Re: Wireless link calculator updated

- no satellite view
- no antenna height
- no visual link on profile relief map
- no export/save as pdf
by InoX
Wed Aug 02, 2017 6:22 pm
Forum: General
Topic: RB1200 NAT performance (throughput)
Replies: 10
Views: 4548

Re: RB1200 NAT performance (throughput)

I'm pretty sure that fastrack is involved in speed increase.
Mikrotik documentation was always flaky.
But anyway, lucky you.
by InoX
Tue Aug 01, 2017 3:20 pm
Forum: General
Topic: RB1200 NAT performance (throughput)
Replies: 10
Views: 4548

Re: RB1200 NAT performance (throughput)

My RB2011 can handle up to 900mbps over pppoe. Fastrack active.
I'm pretty sure it should route more than 200mbps. Check cpu speed, maybe is set to low.
by InoX
Tue Aug 01, 2017 12:55 am
Forum: RouterBOARD hardware
Topic: FTTH distribution switch with 24sfp and 2-4 SFP+ ports
Replies: 14
Views: 4474

Re: FTTH distribution switch with 24sfp and 2-4 SFP+ ports

In my country one EPON for 512 ONU is 1200$. 8xSFP- GEPON not included.
by InoX
Thu Jul 27, 2017 1:40 pm
Forum: Wireless Networking
Topic: 100m semi-dense trees PtP
Replies: 6
Views: 1878

Re: 100m semi-dense trees PtP

I had good results with SXT Lite 2. Speed was 20-50mbps but conected to sector with 35 clients. Distance was ~500-1.000m with no los because of the trees (huge ones). Links are stable. A test is cheap with these radios.
by InoX
Thu Jul 27, 2017 1:50 am
Forum: Wireless Networking
Topic: DynaDish5 P2P 9km link low speed
Replies: 2
Views: 969

Re: DynaDish5 P2P 9km link low speed

Your signal is to low. It should be around -55, so maybe los is obstructed or missaligned. Also for that signal you should get at least 80mbps if there is clear los.
by InoX
Tue Jul 18, 2017 9:13 pm
Forum: General
Topic: 40 mb bandwidth 200 user with router os on pc ?
Replies: 5
Views: 1512

Re: 40 mb bandwidth 200 user with router os on pc ?

Hi ,
I was just wondering if I use a dual core pc with 2gb ram , can it handle 40 mb bandwidth + 20 mb YouTube traffic for 200 ppoe user ? Please advice

Thanks
Yes it can.
by InoX
Thu Jul 13, 2017 6:08 pm
Forum: Wireless Networking
Topic: SXT LTE max concurent users
Replies: 3
Views: 1272

Re: SXT LTE max concurent users

The bottleneck is the soho router. Using mikrotik should be better but I would use another router for client management because sxt lte has low end hardware. Use RB750r3 or 3011.
by InoX
Thu Jul 13, 2017 6:02 pm
Forum: General
Topic: Speed less than 20 Mbps
Replies: 5
Views: 3703

Re: Speed less than 20 Mbps

Check the speed you are connected.
by InoX
Sun Jul 02, 2017 10:31 pm
Forum: General
Topic: Poor single-threaded performance over PPPoE
Replies: 4
Views: 2431

Re: Poor single-threaded performance over PPPoE

My RB2011 work at ~1Gbps download and 500mbps upload. This is my internet connection speed. Also pppoe and default configuration.
Tested with speedtest.net.
by InoX
Fri Jun 23, 2017 1:13 am
Forum: RouterBOARD hardware
Topic: Solder SMA connector to RB951Ui-2HnD
Replies: 10
Views: 2429

Re: Solder SMA connector to RB951Ui-2HnD

10 dbi omni antennas for indoors are worse than 5dbi. I solder pigtails and used 5dbi with excelent results. Signal was better with exactly 3dbi. Also if you didn't know from the start which are the antennas, it is a good chance you also did not do a very good solder job.
by InoX
Thu Jun 22, 2017 2:00 am
Forum: RouterBOARD hardware
Topic: Solder SMA connector to RB951Ui-2HnD
Replies: 10
Views: 2429

Re: Solder SMA connector to RB951Ui-2HnD

Those are not ufl. Are test points.
Unsolder the antennas and solder the pigtails in the same points.
by InoX
Tue Jun 20, 2017 11:19 pm
Forum: Wireless Networking
Topic: How 5ghz-a/n/ac works ??
Replies: 3
Views: 2629

Re: How 5ghz-a/n/ac works ??

Play with extension channel.
by InoX
Tue Jun 20, 2017 11:15 pm
Forum: RouterBOARD hardware
Topic: USB Battery to power routerboard
Replies: 21
Views: 6894

Re: USB Battery to power routerboard

But from his post
It's expensive to set up full solar power stations in some of these areas
I understand he want's solar panel also because of the solar battery from the link. An ups or mups with external battery is a better solution if there is some power out of the outlet.
by InoX
Tue Jun 20, 2017 10:30 pm
Forum: RouterBOARD hardware
Topic: USB Battery to power routerboard
Replies: 21
Views: 6894

Re: USB Battery to power routerboard

It wont help, he still need to buy battery, charger and solar panel.
by InoX
Sat Jun 10, 2017 11:20 am
Forum: Wireless Networking
Topic: Does RBMetal9HPn Works with 802.11ah??
Replies: 15
Views: 3907

Re: Does RBMetal9HPn Works with 802.11ah??

No one wins :D
by InoX
Sat Jun 10, 2017 2:19 am
Forum: Wireless Networking
Topic: Does RBMetal9HPn Works with 802.11ah??
Replies: 15
Views: 3907

Re: Does RBMetal9HPn Works with 802.11ah??

We'll see...
by InoX
Fri Jun 09, 2017 9:41 pm
Forum: Wireless Networking
Topic: Does RBMetal9HPn Works with 802.11ah??
Replies: 15
Views: 3907

Re: Does RBMetal9HPn Works with 802.11ah??

It's not a discussion abouat routerboard naming, it's about wireless standards.
http://lmgtfy.com/?q=802.11ah
by InoX
Fri Jun 09, 2017 9:29 pm
Forum: Beginner Basics
Topic: Help with a virtual ap
Replies: 3
Views: 1301

Re: Help with a virtual ap

Put interface in the same bridge with wlan.
by InoX
Thu May 18, 2017 7:21 pm
Forum: General
Topic: Wireless Speed Slow
Replies: 3
Views: 2532

Re: Wireless Speed Slow

20MB/s means 160mbps, which is excelent for .n wireless and pretty much maximum speed you will ever see.
by InoX
Thu May 18, 2017 1:21 pm
Forum: Beginner Basics
Topic: Full duplex mimo
Replies: 12
Views: 5885

Re: Full duplex mimo

Maybe you should read your first post again. That's the post I've replied.
Good luck.
by InoX
Tue May 16, 2017 11:21 pm
Forum: Wireless Networking
Topic: PtMP maximum wireless performance
Replies: 17
Views: 10719

Re: PtMP maximum wireless performance

41 wireless clients are to many. Leave 20 and check the speed. If is higher, at least 50mbps, you must install one more sector.
by InoX
Tue May 16, 2017 2:44 am
Forum: Beginner Basics
Topic: Full duplex mimo
Replies: 12
Views: 5885

Re: Full duplex mimo

but that wouldn't be AF5X because it is also a half duplex radio. He asked for low latency not necessary for full duplex. Full duplex was a questionable solution. Wireless ISP's are not affected by extra 1-3ms> we are dealing with much worse latency. So gaining 1ms for at least 4x the price is not ...
by InoX
Mon May 15, 2017 12:24 am
Forum: Beginner Basics
Topic: Full duplex mimo
Replies: 12
Views: 5885

Re: Full duplex mimo

AirFiber 5X
by InoX
Fri May 12, 2017 8:21 pm
Forum: Beginner Basics
Topic: Full duplex mimo
Replies: 12
Views: 5885

Re: Full duplex mimo

It will not.
by InoX
Mon May 08, 2017 12:21 pm
Forum: Wireless Networking
Topic: SXT 5 AC bandwith problem
Replies: 28
Views: 4788

Re: SXT 5 AC bandwith problem

Don't relay on internal btest.
by InoX
Fri May 05, 2017 12:21 pm
Forum: Wireless Networking
Topic: PtMP maximum wireless performance
Replies: 17
Views: 10719

Re: PtMP maximum wireless performance

Inox, which type of antenna+cables do you use in your setup ? It seems your signals are considerably better. thanks It's all written in the post... . The better you get is 75 mega with 25 cpes and 80 Mhz (40V+40H) ? In fact is 40Mhz (20+20) There are much more efficients wimax system which can deli...
by InoX
Fri May 05, 2017 2:57 am
Forum: Wireless Networking
Topic: PtMP maximum wireless performance
Replies: 17
Views: 10719

Re: PtMP maximum wireless performance

As you can see from the pictures, the problem is in hardware. If you have problems seeing that, put some glasses.I have posted an better solution and you didn't. You can clearly see that I am also using mikrotik hardware. Now I wonder, if I have clearly give an example with better results why you sa...
by InoX
Thu May 04, 2017 4:31 pm
Forum: Wireless Networking
Topic: PtMP maximum wireless performance
Replies: 17
Views: 10719

Re: PtMP maximum wireless performance

https://forum.mikrotik.com/viewtopic.php?f=7&t=121104 Upgrade your base station radio and antenna, it's cheap considering the clients number. Always use the best radio and antenna. I used only netmetal+19dbi sector or now is best to use mANTBox 19s. I have 24 wireless clients and over 50 conecte...
by InoX
Tue May 02, 2017 8:14 pm
Forum: Wireless Networking
Topic: SXT 5 AC bandwith problem
Replies: 28
Views: 4788

Re: SXT 5 AC bandwith problem

You can see in picture AP side is bridge.
I can't see that.
Anyway you have made a mistake somewhere. Maybe the interfaces are not in bridge mode?
by InoX
Tue May 02, 2017 8:02 pm
Forum: Wireless Networking
Topic: SXT 5 AC bandwith problem
Replies: 28
Views: 4788

Re: SXT 5 AC bandwith problem

Use Bridge and Station Bridge.
by InoX
Tue May 02, 2017 12:40 am
Forum: Wireless Networking
Topic: SXT 5 AC bandwith problem
Replies: 28
Views: 4788

Re: SXT 5 AC bandwith problem

Use Bridge and Station Bridge.
by InoX
Mon May 01, 2017 9:54 pm
Forum: Wireless Networking
Topic: SXT 5 AC bandwith problem
Replies: 28
Views: 4788

Re: SXT 5 AC bandwith problem

Try 40Mhz. It goes up to 250mbps for me.
by InoX
Sun Apr 30, 2017 6:52 pm
Forum: Wireless Networking
Topic: Real PMP throughput
Replies: 4
Views: 2315

Re: Real PMP throughput

Everything is default.
by InoX
Wed Apr 26, 2017 2:42 pm
Forum: Wireless Networking
Topic: Real PMP throughput
Replies: 4
Views: 2315

Re: Real PMP throughput

Up to 110mbps with NetMetal and 12 wireless clients with over 100 other clients (40Mhz/NV2).
by InoX
Mon Apr 24, 2017 1:23 pm
Forum: Beginner Basics
Topic: just a guy with mikrotik haplite
Replies: 19
Views: 16213

Re: just a guy with mikrotik haplite

It is normal for the ping to raise when you only have 5mbps internet...
by InoX
Mon Apr 24, 2017 12:05 pm
Forum: Beginner Basics
Topic: Basebox5 - NO PPP intervafe [SOLVED]
Replies: 3
Views: 1971

Re: Basebox5 - NO PPP intervafe [SOLVED]

He already said it has one installed...
by InoX
Sun Apr 23, 2017 7:56 pm
Forum: Wireless Networking
Topic: 912UAG-5HPnD poor Wifi performance
Replies: 14
Views: 3652

Re: 912UAG-5HPnD poor Wifi performance

Most likely.
by InoX
Thu Apr 20, 2017 9:53 pm
Forum: Wireless Networking
Topic: 912UAG-5HPnD poor Wifi performance
Replies: 14
Views: 3652

Re: 912UAG-5HPnD poor Wifi performance

Did you power for the first time the router without antennas ?
by InoX
Mon Apr 17, 2017 11:27 pm
Forum: Wireless Networking
Topic: 912UAG-5HPnD poor Wifi performance
Replies: 14
Views: 3652

Re: 912UAG-5HPnD poor Wifi performance

Your config is not helpful and not related to your problem, wireless clients screenshot can help.
by InoX
Sat Apr 15, 2017 12:49 pm
Forum: General
Topic: login failed simultaneous session limit reached
Replies: 2
Views: 2539

Re: login failed simultaneous session limit reached

Maybe your license is to small for the clients number...
by InoX
Thu Apr 06, 2017 10:48 pm
Forum: General
Topic: CCR1009-7G-1C-1S+ Not Working?
Replies: 6
Views: 1516

Re: CCR1009-7G-1C-1S+ Not Working?

The simple way - use winbox...
by InoX
Sun Apr 02, 2017 11:41 pm
Forum: Wireless Networking
Topic: Xiaomi
Replies: 2
Views: 2395

Re: Xiaomi

Ignore him, google translate can't help him anymore.
All Qualcom Xiaomi devices are connecting at 54mbps. Mediatek seems to work, at least Redmi note 3G. It's a known problem and will never be fixed.
by InoX
Thu Mar 30, 2017 12:30 pm
Forum: Wireless Networking
Topic: 1x Sector Per Chain
Replies: 2
Views: 927

Re: 1x Sector Per Chain

You can do that but will never work like a 2x2 sector. Performance will be lower. A dual chain omni will be better.
by InoX
Sat Mar 25, 2017 11:42 pm
Forum: General
Topic: Just got my new CCR1009-7G-1C-PC
Replies: 24
Views: 6837

Re: Just got my new CCR1009-7G-1C-PC

Important changes: No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports. https://routerbo...
by InoX
Sun Mar 12, 2017 1:44 am
Forum: Wireless Networking
Topic: DynaDisk5 PTP with DHCP configuration
Replies: 3
Views: 1111

Re: DynaDisk5 PTP with DHCP configuration

Use Station Bridge.
by InoX
Wed Mar 08, 2017 9:33 pm
Forum: Wireless Networking
Topic: SXT Lite 5 NV2 Link low CCQ
Replies: 9
Views: 12497

Re: SXT Lite 5 NV2 Link low CCQ

A reliable signal is -50...-55
Also in case of heavy attenuation like snow, if will ever happen, manual rate will not work (can't select lower rate) and link will disconnect. Been there, done that. It's roulette.
by InoX
Wed Mar 08, 2017 12:46 am
Forum: Wireless Networking
Topic: SXT Lite 5 NV2 Link low CCQ
Replies: 9
Views: 12497

Re: SXT Lite 5 NV2 Link low CCQ

Signal is to low. Check configuration.
by InoX
Sun Mar 05, 2017 12:03 am
Forum: RouterBOARD hardware
Topic: Another CCR bites the dust
Replies: 13
Views: 4633

Re: Another CCR bites the dust

just for fun :D
by InoX
Sun Feb 26, 2017 10:55 pm
Forum: Beginner Basics
Topic: rb951G only supports up to 50MB
Replies: 4
Views: 1392

Re: rb951G only supports up to 50MB

Yes it's true.
After 50MB the router will shut down. You need to wake it up with rooster.
by InoX
Sun Feb 26, 2017 8:34 pm
Forum: Wireless Networking
Topic: 8km link with LHG 5 connected to mANTBOX 19s
Replies: 4
Views: 1985

Re: 8km link with LHG 5 connected to mANTBOX 19s

You could try another channel between 5500-5600. Antenna has more gain.
by InoX
Sat Feb 25, 2017 11:24 pm
Forum: Wireless Networking
Topic: 8km link with LHG 5 connected to mANTBOX 19s
Replies: 4
Views: 1985

Re: 8km link with LHG 5 connected to mANTBOX 19s

I have one client with -54/-59 dBm at 8km so you have a problem. You are missing some dbm. I have the same setup except I'm using 5560Mhz. Upload is 30-50mbps tcp.
by InoX
Sat Feb 25, 2017 1:53 pm
Forum: RouterBOARD hardware
Topic: rb450g with openwrt bricked
Replies: 2
Views: 1456

Re: rb450g with openwrt bricked

Since you've installed openwrt why are you asking for support here? Use openwrt forum.
by InoX
Fri Feb 24, 2017 7:34 pm
Forum: Beginner Basics
Topic: Tower 1 to Tower 2 transport data
Replies: 6
Views: 1504

Re: Tower 1 to Tower 2 transport data

But a mikrotik in bridge mode is like a software switch. Are you sure your switch wasn't a bad one?
by InoX
Fri Feb 24, 2017 12:00 am
Forum: Beginner Basics
Topic: Tower 1 to Tower 2 transport data
Replies: 6
Views: 1504

Re: Tower 1 to Tower 2 transport data

I'm pretty sure you have a wireless problem not bridge/routing problem.
by InoX
Wed Feb 22, 2017 9:56 pm
Forum: Wireless Networking
Topic: Basebox 2 as wlan repeater
Replies: 5
Views: 1527

Re: Basebox 2 as wlan repeater

Number of chains 2
High power, Dual chain
2 chains -> 2 antennas
by InoX
Wed Feb 22, 2017 9:22 pm
Forum: Wireless Networking
Topic: Basebox 2 as wlan repeater
Replies: 5
Views: 1527

Re: Basebox 2 as wlan repeater

RTFM
by InoX
Tue Feb 21, 2017 8:57 pm
Forum: Wireless Networking
Topic: Mikrotik 6Km PTP radio link in a eolic tower
Replies: 6
Views: 1676

Re: Mikrotik 6Km PTP radio link in a eolic tower

It might be hard to find boxes that fit DynaDish or qrt. Even so, you must to build a strong mount for a thin plastic. Water sealent might help.
by InoX
Tue Feb 21, 2017 8:32 pm
Forum: Wireless Networking
Topic: Perfect CPE Disc Lite5 or SXT lite5 or LHG 5
Replies: 2
Views: 5015

Re: Perfect CPE Disc Lite5 or SXT lite5 or LHG 5

You can find information and comparisons between radios on www.routerboard.com Also https://i.mt.lv/routerboard/files/antenas-mantbox-160404123306.pdf and https://i.mt.lv/routerboard/files/antenas-160404123306.pdf on the same web page... You don't need someone to tell you that one has bigger antenna...
by InoX
Mon Feb 20, 2017 9:53 pm
Forum: Wireless Networking
Topic: wlan1 (2GHz) slower than wlan2 (5GHz)
Replies: 1
Views: 826

Re: wlan1 (2GHz) slower than wlan2 (5GHz)

By default 5ghz was introduced in soho routers because of better performance. So if you get 200mbps in 5ghz and 50mbps in 2ghz it could be a fair result. Now it depends what does "much much slower" means for you. Also if I use a tplink wireless adapter at my house I get a speed of ~30mbps....
by InoX
Mon Feb 20, 2017 7:58 pm
Forum: RouterBOARD hardware
Topic: 2011 & 3011 Series with POE PORT
Replies: 7
Views: 2884

Re: 2011 & 3011 Series with POE PORT

Connect a relay at port 10 poe out and you can control the power on all radios. It is the easiest way until mikrotik will release more than 5 port poe out router. The relay is normaly ON and when you activate poe out, it will cut the power. POE out will only power the relay so you can use any number...
by InoX
Mon Feb 20, 2017 4:14 pm
Forum: Wireless Networking
Topic: Mikrotik 6Km PTP radio link in a eolic tower
Replies: 6
Views: 1676

Re: Mikrotik 6Km PTP radio link in a eolic tower

I'm pretty sure it will handle.
I don't think any antenna system has IP Code in datasheet.
by InoX
Sun Feb 19, 2017 1:05 am
Forum: General
Topic: Yet another "dhcp,warning offering lease without success" issue
Replies: 38
Views: 27752

Re: Yet another "dhcp,warning offering lease without success" issue

I've had this problem from about 10 years, in all cases was faulty cable/connector or switch/router. Or just the router needed a resetart.
by InoX
Sun Feb 19, 2017 1:01 am
Forum: General
Topic: Bandwidth Test Limitations by platform
Replies: 1
Views: 1115

Re: Bandwidth Test Limitations by platform

You are just one more that is pushing the limits of routers with btest. CPU is strugling to generate the traffic so performance is limited. Use 2 computers to generate the traffic which pass through the routers. Search the forum next time you have an occasional briliant ideea. It had been discussed ...
by InoX
Wed Feb 15, 2017 7:36 pm
Forum: Wireless Networking
Topic: Authenticating on the wifi that needs user/pass
Replies: 6
Views: 2118

Re: Authenticating on the wifi that needs user/pass

You already have an answer.
by InoX
Tue Feb 14, 2017 7:01 pm
Forum: Wireless Networking
Topic: 5Ghz Cost effective CPE Solutions
Replies: 4
Views: 1428

Re: 5Ghz Cost effective CPE Solutions

A dual band router + external antenna will cost more and perform worse than a SXT+router.
by InoX
Sat Feb 11, 2017 9:27 pm
Forum: General
Topic: Winbox add note (comment)
Replies: 3
Views: 6302

Re: Winbox add note (comment)

Thanks.
by InoX
Sat Feb 11, 2017 1:23 am
Forum: General
Topic: Winbox add note (comment)
Replies: 3
Views: 6302

Winbox add note (comment)

Is there any chance to ever have back the ability to insert notes to saved addresses?
by InoX
Wed Nov 30, 2016 3:25 pm
Forum: Wireless Networking
Topic: QRT5ac throughput
Replies: 13
Views: 3130

Re: QRT5ac throughput

Those tests are useless.
Strange results are because of that CRS.
by InoX
Tue Nov 29, 2016 7:39 pm
Forum: Wireless Networking
Topic: NV2 vs NSTREME... Why the difference?
Replies: 16
Views: 25270

Re: NV2 vs NSTREME... Why the difference?

- Desired wireless throughput is 500 meg sustained (400 meg send and 100 meg receive) I'm pretty sure you will be disapointed. Which provides greater throughput (NV2 or Nstream) for a point-to-point WDS link where You have to test it yourself, there is no answer for that. ( That is what " Nstr...
by InoX
Tue Nov 29, 2016 1:00 am
Forum: RouterBOARD hardware
Topic: RB953GS-5HnT-RP upgrading or not?
Replies: 13
Views: 2963

Re: RB953GS-5HnT-RP upgrading or not?

You can always use this with ROS
http://pcengines.ch/apu2c4.htm
by InoX
Tue Nov 29, 2016 12:55 am
Forum: General
Topic: Access Point and Station in a single unit
Replies: 8
Views: 1939

Re: Access Point and Station in a single unit

Because this is a Mikrotik forum, we are talking about Mikrotik products.
by InoX
Mon Nov 28, 2016 3:45 pm
Forum: General
Topic: EMI / RFI Shielding Coatings
Replies: 1
Views: 910

EMI / RFI Shielding Coatings

I've used with success for a long time aluminium tape to shield radios with plastic case. It takes time and quite some work.
I'm wondering if zinc spray can be used to shield these cases. It contains over 90% zinc. Anybody knows something about this?
by InoX
Sun Nov 27, 2016 9:28 pm
Forum: RouterBOARD hardware
Topic: GPON networks with Mikrotik/Routerboard SFP ports
Replies: 87
Views: 74423

Re: GPON networks with Mikrotik/Routerboard SFP ports

Hello.
You can read my posts.
Also you can kick "peper" in the nuts.
by InoX
Sun Nov 27, 2016 9:17 pm
Forum: RouterBOARD hardware
Topic: why mik don't have 4G integrated router
Replies: 9
Views: 2893

Re: why mik don't have 4G integrated router

No, you are wasting our time.
Integrated 3/4G router is a stupid ideea, thats why 3/4G usb modems exists.
Those integrated routers are sold mostly by mobile providers, so talk to them. Tell us how it worked.
by InoX
Sun Nov 27, 2016 11:30 am
Forum: General
Topic: $1000 REWARD CCR1036 w/ vlans traffic dropping for a second
Replies: 5
Views: 2151

Re: $1000 REWARD CCR1036 w/ vlans traffic dropping for a second

If is not to difficult, I would try with an x86 and 5.26 for half a day. If will work well you can eliminate hardware and software. It remains configuration. Use just 1GB connection instead of 10gbps, lower the price of the test if is possible, Put some queues to limit traffic to 950mbps. There wher...
by InoX
Sat Nov 26, 2016 1:40 am
Forum: Wireless Networking
Topic: QRT5ac throughput
Replies: 13
Views: 3130

Re: QRT5ac throughput

omfg
by InoX
Fri Nov 25, 2016 9:49 pm
Forum: Wireless Networking
Topic: QRT5ac throughput
Replies: 13
Views: 3130

Re: QRT5ac throughput

Not even with 4xQRT you wont be able to get 1GBPS full duplex. Maybe 600-700mbps.
by InoX
Fri Nov 25, 2016 9:44 pm
Forum: RouterBOARD hardware
Topic: why mik don't have 4G integrated router
Replies: 9
Views: 2893

Re: why mik don't have 4G integrated router

It doesn't look good, no external ugly antennas, no desktop case. 8)
Anyway, external usb modem is a better choice, you can replaced it at will.
by InoX
Fri Nov 25, 2016 7:46 pm
Forum: Wireless Networking
Topic: NV2 vs NSTREME... Why the difference?
Replies: 16
Views: 25270

Re: NV2 vs NSTREME... Why the difference?

You won't get any...
by InoX
Fri Nov 25, 2016 5:06 pm
Forum: Wireless Networking
Topic: NV2 vs NSTREME... Why the difference?
Replies: 16
Views: 25270

Re: NV2 vs NSTREME... Why the difference?

Nv2 was better than nstreme on older hardware. Since .ac or event RB9xx series, nstreme is better. So it might be the hardware. Anyway, wireless is the rarest updated by mikrotik. Wireless development seems to be halted since a long time.
by InoX
Fri Nov 25, 2016 5:00 pm
Forum: Beginner Basics
Topic: How to divide channel equally on a usb modem?
Replies: 14
Views: 3411

Re: How to divide channel equally on a usb modem?

We don't think that enough :lol:
by InoX
Fri Nov 25, 2016 3:21 am
Forum: RouterBOARD hardware
Topic: hAP AC 20MHz 802.11n bad
Replies: 4
Views: 2253

Re: hAP AC 20MHz 802.11n bad

What does 'distance' actually change anyway?
ACK
by InoX
Thu Nov 24, 2016 12:58 am
Forum: Wireless Networking
Topic: full duplex link....
Replies: 27
Views: 6722

Re: full duplex link....

hi, what is a better solution for using a full duplex link?? One RB with 2 WLAN card on each side or 4 units of RB-SXT?? and is it possible for RB-SXT to be used for a full duplex link as i have not been able to find any config for that though.... I know it has been 2 years. But I was also wonderin...
by InoX
Thu Nov 24, 2016 12:51 am
Forum: Wireless Networking
Topic: PTMP Sector thrughput
Replies: 10
Views: 2572

Re: PTMP Sector thrughput

I know.
by InoX
Tue Nov 22, 2016 11:22 pm
Forum: Wireless Networking
Topic: PTMP Sector thrughput
Replies: 10
Views: 2572

Re: PTMP Sector thrughput

On ubnt forum, an user post tests with these horns. The results where better than ubnt antennas.
by InoX
Tue Nov 22, 2016 7:25 pm
Forum: RouterBOARD hardware
Topic: Netmetal 5 RB922UAGS-5HPacD-NM 12km ptp best configuration need.
Replies: 1
Views: 1562

Re: Netmetal 5 RB922UAGS-5HPacD-NM 12km ptp best configuration need.

It is better to show us what you did and we can suggest changes.
by InoX
Tue Nov 22, 2016 3:14 am
Forum: Wireless Networking
Topic: PTMP Sector thrughput
Replies: 10
Views: 2572

Re: PTMP Sector thrughput

You could also try to use nstreme until you install one more sector. It runs better in my case.
by InoX
Tue Nov 08, 2016 1:21 pm
Forum: Wireless Networking
Topic: RF Tests for R11e-2HPnD & Mikrotik Metal
Replies: 39
Views: 5350

Re: RF Tests for R11e-2HPnD & Mikrotik Metal

Amplifiers are garbage. No matter the distance.
I don't see the gain of amplifing 30dbm to 35dbm. 30dbm is enough. Also I'm pretty sure that's a peak power. And if it is used indoors, it will be even worse.
Pigtail has some loss.
by InoX
Sat Nov 05, 2016 11:48 pm
Forum: Wireless Networking
Topic: RF Tests for R11e-2HPnD & Mikrotik Metal
Replies: 39
Views: 5350

Re: RF Tests for R11e-2HPnD & Mikrotik Metal

That's funny.
I'm waiting for replays.
Also I'm pretty sure you should start with http://www.mikrotik.com/test_link.php for distance.
by InoX
Sat Oct 29, 2016 3:00 am
Forum: General
Topic: Problem Intel I350 t4
Replies: 11
Views: 5918

Re: Problem Intel I350 t4

only in v7 beta that will be released soon
by InoX
Sat Oct 22, 2016 9:54 pm
Forum: RouterBOARD hardware
Topic: wAP AC and CRS125-24G for company network
Replies: 3
Views: 1278

Re: wAP AC and CRS125-24G for company network

Plastic strips?
I wouldn't use CRS for routing. If you need fiber, use RB3011.
Wireless covering is an marketing stupidity. Its all about other elements around. It can serve 40 clients. Keep in mind is a dual radio so it might serve 2x40 clients.
by InoX
Sat Oct 22, 2016 8:35 pm
Forum: Wireless Networking
Topic: NetMetal success story
Replies: 1
Views: 1168

NetMetal success story

Since NetMetal appereance on market, I've been able to buy one before the stock sold out. Notice the uptime of radio and also the traffic speed and link uptime. There was also two bad things, the leds sticker came of and the paint is all coroded. Is installed 50m from the sea. The sector replaced a ...
by InoX
Fri Oct 21, 2016 1:51 am
Forum: General
Topic: Is there have no alternative solution for FAN NOISE of CCR?
Replies: 3
Views: 2325

Re: Is there have no alternative solution for FAN NOISE of CCR?

Cut the + wire and add a 100ohm resistor. Or buy those adapters from the picture.
https://www.quietpc.com/images/products ... -large.jpg
by InoX
Thu Oct 20, 2016 7:55 pm
Forum: Wireless Networking
Topic: 802.11AC issue on Groove GA-52HPacn
Replies: 2
Views: 1487

Re: 802.11AC issue on Groove GA-52HPacn

Did you upgrade to the latest version?
by InoX
Thu Oct 20, 2016 7:49 pm
Forum: RouterBOARD hardware
Topic: RB951Ui-2HnD Full Power?
Replies: 2
Views: 1391

Re: RB951Ui-2HnD Full Power?

Check Tx power tab in wireless settings. It will show the real power used for emitting. Also manual-txpower must be selected.
by InoX
Sun Oct 16, 2016 1:42 pm
Forum: RouterBOARD hardware
Topic: RB911G vs RB922UAGS
Replies: 3
Views: 1576

Re: RB911G vs RB922UAGS

Real pictures:
by InoX
Sun Oct 16, 2016 1:11 am
Forum: RouterBOARD hardware
Topic: RB911G vs RB922UAGS
Replies: 3
Views: 1576

Re: RB911G vs RB922UAGS

by InoX
Sun Oct 16, 2016 1:05 am
Forum: Wireless Networking
Topic: AR9300 half duplex or full duplex???
Replies: 3
Views: 1628

Re: AR9300 half duplex or full duplex???

Because every chain can receive and transmit.
by InoX
Sat Oct 15, 2016 4:04 pm
Forum: Wireless Networking
Topic: AR9300 half duplex or full duplex???
Replies: 3
Views: 1628

Re: AR9300 half duplex or full duplex???

All radios are half duplex. For full duplex you need ~3000$ per piece.
Also there are 2 chains, not 4.
by InoX
Fri Oct 14, 2016 7:29 pm
Forum: RouterBOARD hardware
Topic: whats so cloudy?
Replies: 6
Views: 1833

Re: whats so cloudy?

New formula...
by InoX
Thu Oct 13, 2016 4:04 pm
Forum: General
Topic: Blocking access to speedtest sites.
Replies: 11
Views: 8746

Re: Blocking access to speedtest sites.

There are to many speed test sites and aplications to block effectively. But you can block one by one. I don't see how can you block Android or ios apps.
by InoX
Wed Oct 12, 2016 11:16 pm
Forum: Beginner Basics
Topic: RB450G max wan speed?
Replies: 10
Views: 5004

Re: RB450G max wan speed?

I'm pretty sure it can route up tu 500mbps but I've never tested. I hhave one in the basemen in storage. May I'll make time to test it with my 500/25mbps connection.
by InoX
Wed Oct 12, 2016 11:05 pm
Forum: RouterBOARD hardware
Topic: LHG 5
Replies: 10
Views: 3074

Re: LHG 5

I've installed ~15 LHG in the same spots where AirGrids 23/27. All LHG have 10-30 dbi better signal than AirGrids.
by InoX
Wed Oct 12, 2016 1:16 pm
Forum: Beginner Basics
Topic: RB450G max wan speed?
Replies: 10
Views: 5004

Re: RB450G max wan speed?

Check wan connection, should be 1Gbps.
by InoX
Tue Oct 11, 2016 8:13 pm
Forum: RouterBOARD hardware
Topic: LHG 5
Replies: 10
Views: 3074

Re: LHG 5

2xLHG5 , 10km, 120mbps
by InoX
Mon Oct 10, 2016 9:10 pm
Forum: Wireless Networking
Topic: Low Speed with 2 Sextant Bridge P2P
Replies: 8
Views: 2175

Re: Low Speed with 2 Sextant Bridge P2P

Maybe you have only 10mbps internet...
by InoX
Mon Oct 10, 2016 7:21 pm
Forum: Wireless Networking
Topic: Low Speed with 2 Sextant Bridge P2P
Replies: 8
Views: 2175

Re: Low Speed with 2 Sextant Bridge P2P

Try 5500-5600Mhz and nstreme.
by InoX
Mon Oct 10, 2016 5:03 pm
Forum: Wireless Networking
Topic: SXT 5HacD 2n r2 2,4GHz Management ?
Replies: 8
Views: 2618

Re: SXT 5HacD 2n r2 2,4GHz Management ?

default-authentication=no
Also check the logs.
by InoX
Sat Oct 08, 2016 4:50 pm
Forum: RouterBOARD hardware
Topic: Repair part needed RTF-113BAH3A
Replies: 9
Views: 2389

Re: Repair part needed RTF-113BAH3A

I found it hard to believe that rj45 connector can make shortcut. Did you measure it unsoldered to the board?
by InoX
Sat Oct 08, 2016 4:48 pm
Forum: Wireless Networking
Topic: SXT 5HacD 2n r2 2,4GHz Management ?
Replies: 8
Views: 2618

Re: SXT 5HacD 2n r2 2,4GHz Management ?

ap-bridge mode?
Not supported?! :D
by InoX
Sat Oct 08, 2016 4:46 pm
Forum: General
Topic: GPON SFP with Custom Serial
Replies: 4
Views: 1669

Re: GPON SFP with Custom Serial

Waste of time from many points of view. First is spanish...
by InoX
Sat Oct 08, 2016 12:50 pm
Forum: General
Topic: GPON SFP with Custom Serial
Replies: 4
Views: 1669

Re: GPON SFP with Custom Serial

What is Clowfounding ?
by InoX
Fri Oct 07, 2016 8:53 pm
Forum: RouterBOARD hardware
Topic: New CPU - new product RB750Gr3 - RB750G family - now mmips
Replies: 180
Views: 98012

Re: New CPU - new product RB750Gr3 - RB750G family - now mmips

Exactly! 4g is best option for most people in Europe to get dual WAN failover. I can get 15gb for as low as 5€ /month.
I really can't understand lack of USB in 750 and 850gx2 (and sfp cage in this).
35GB for 2€/month :D
by InoX
Mon Oct 03, 2016 10:54 pm
Forum: Wireless Networking
Topic: Did they lie about the distance?
Replies: 13
Views: 2318

Re: Did they lie about the distance?

The same radios give me 200-250mbps. But with -40 signal.
by InoX
Mon Oct 03, 2016 10:34 pm
Forum: Wireless Networking
Topic: Did they lie about the distance?
Replies: 13
Views: 2318

Re: Did they lie about the distance?

btw how did you tested the speed?
by InoX
Wed Sep 28, 2016 1:31 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD
Replies: 7
Views: 1808

Re: RB922UAGS-5HPacD

Try a lower channel like 5500-5600Mhz. Noise floor is not acurate. Anything above 5700Mhz won't work to good, antennas has lower gain.
by InoX
Wed Sep 28, 2016 12:09 am
Forum: Wireless Networking
Topic: NetMetal5 With AR9888 WiFi Benchmark
Replies: 2
Views: 1227

Re: NetMetal5 With AR9888 WiFi Benchmark

Try with 2 chains on netmetal and after that 40mhz.
by InoX
Mon Sep 26, 2016 6:34 pm
Forum: Beginner Basics
Topic: RB951Ui-2HnD - Ether1 burns my devices
Replies: 10
Views: 2646

Re: RB951Ui-2HnD - Ether1 burns my devices

Maybe is a damage router returned for replacement and the seller tried to make a good business with you.
by InoX
Mon Sep 26, 2016 6:31 pm
Forum: General
Topic: RB 3011 UiAS-RM
Replies: 1
Views: 966

Re: RB 3011 UiAS-RM

So loss ocur between your pc and router. Try with a second pc in the same time you download torrents with first pc. If there are no losses, check first pc. Also you could try limiting torrents speed to less than 1Gbps.
by InoX
Mon Sep 26, 2016 6:27 pm
Forum: Beginner Basics
Topic: Lite 5 with airgrid m5
Replies: 8
Views: 6504

Re: Lite 5 with airgrid m5

i have many network issues. So please tell me what is the best for me........
It depends on what kind of network issues you have.
Maybe your crimping tool is broken. :D
Also LHG 5 is a cheaper and better choice now.
by InoX
Mon Sep 26, 2016 6:18 pm
Forum: Wireless Networking
Topic: Simple question on link speeds over 17km
Replies: 5
Views: 1962

Re: Simple question on link speeds over 17km

100-300mbps
by InoX
Sat Sep 24, 2016 12:44 am
Forum: RouterBOARD hardware
Topic: NAT Performance for 1Gbps Internet
Replies: 4
Views: 2470

Re: NAT Performance for 1Gbps Internet

You can go with RB3011. I have it, also RB1100AHx2 and both do the job with queues, mangle, address lists,filters and so on.
by InoX
Sat Sep 24, 2016 12:41 am
Forum: Wireless Networking
Topic: mANTBox 19s and SXT Lite5 very poor Tx/RX CCQ
Replies: 20
Views: 8654

Re: mANTBox 19s and SXT Lite5 very poor Tx/RX CCQ

Why not LHG's?
by InoX
Fri Sep 23, 2016 12:00 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD
Replies: 7
Views: 1808

Re: RB922UAGS-5HPacD

also indoor test for outdoor radios are useless...best result in AC mode is ~250mbps in my case. There are more things that can affect a wireless link. You must first install it.
by InoX
Thu Sep 22, 2016 12:06 am
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD
Replies: 7
Views: 1808

Re: RB922UAGS-5HPacD

The first step is to stop using internal btest.
by InoX
Wed Sep 21, 2016 11:18 pm
Forum: RouterBOARD hardware
Topic: RB2011UiAS-RM LCD Causing high CPU and ping spikes
Replies: 15
Views: 4727

Re: RB2011UiAS-RM LCD Causing high CPU and ping spikes

Each time the screen is drawn, the cpu can jump ~5%. We can optimize how often it is re-drawn, but some kind of CPU increase will be there, because any action requires the CPU. This includes all things you do in the device. Does this apply and if the lcd is in "standby" mode ? Or only if ...
by InoX
Wed Sep 21, 2016 9:05 pm
Forum: Wireless Networking
Topic: mANTBox 19s and SXT Lite5 very poor Tx/RX CCQ
Replies: 20
Views: 8654

Re: mANTBox 19s and SXT Lite5 very poor Tx/RX CCQ

You can't. Not at 4km. Maybe 1km.
Also in btest, limiting tx and rx speed to 70+70mbps will give you exactly 140mbps.
by InoX
Tue Sep 20, 2016 11:18 pm
Forum: Wireless Networking
Topic: mANTBox 19s and SXT Lite5 very poor Tx/RX CCQ
Replies: 20
Views: 8654

Re: mANTBox 19s and SXT Lite5 very poor Tx/RX CCQ

Maybe passwords don't match.
by InoX
Tue Sep 20, 2016 5:29 pm
Forum: RouterBOARD hardware
Topic: PTP: QRT2=>SXT or QRT2<=SXT ?
Replies: 4
Views: 1685

Re: PTP: QRT2=>SXT or QRT2<=SXT ?

There is no difference in operating mode.
by InoX
Tue Sep 20, 2016 5:10 pm
Forum: Beginner Basics
Topic: Metal 9s in Bridge Mode
Replies: 13
Views: 2143

Re: Metal 9s in Bridge Mode

5ghz will work much better than 900Mhz.
I don't think the link will ever work like it should...also a pair of LHG's are even cheaper than SXT.
by InoX
Tue Sep 20, 2016 1:59 am
Forum: Wireless Networking
Topic: mANTBox 19s and SXT Lite5 very poor Tx/RX CCQ
Replies: 20
Views: 8654

Re: mANTBox 19s and SXT Lite5 very poor Tx/RX CCQ

Try:
1. nstreme
2. 5200-5600Mhz
Your signal is to low, the link is obstructed or missaligned. It should be around -60. Lower channel might resolve that.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 7