The workaround for me is to increase the timeout of the polling and parallel request at least worked for librenms.

Problem exist in ROS 7.10.1 with 3-4 Full BGP tables , OSPF , and some static routes ( no NAT or connection tracking enabled ). CCR1036

Hello , As a tested and made working , UCRM can start/stop user with mikrotik device ( gateway ) . The thing that can`t do is QoS , but there is plugin to handle the job. The only small issue is that rules for the QoS need to be done manual for all ip addresses on the router , then the plugin uses a...

Hello , First both ISP to have IP addresses with the same network .. didn`t seem real. Second . For load balancing you need to make the firewall to mark the incoming and outgoing connections. https://wiki.mikrotik.com/wiki/ECMP_load_balancing_with_masquerade - example how can be done. https://wiki.m...

Mikrotik didn`t provide DSL models but there are SFP for VDSL2 and more
Just google for SFP vdsl module.
https://www.proscend.com/en-gb/product/vdsl2/180t.html

It will be really nice for that kind of info

After upgrade RB133C from 4.17 to 5.11 the rb can`t boot from the nand , after that i made a netinstall with 5.12 and right now it lost
his license key , some idea how to fix this ?

I did some other tests , everything is fine , until pppoe session reaches ~500 active sessions with xeon 1,6 ( 5030 think was the model ) and MB some Supermicro with 2G ram traffic is max 300mb , until session coun tis ~400 is fine but if it reaches more , all goes down , high latency and lot of loss.

Maximum count will be 1000+ current is about 400-500 active sessions traffic is ~500mb max with speed per PPPoE subscriber 12/36/48mb is the speed from the radius server that is set , i stopped the multi-cpu and got much more high cpu load 80-90% load but latency is fine , with multi cpu i got loss ...

What is the maximum traffic that someone puts true router with MT for PPPoE with rate-limit from radius


not RB , when using x86 based PC.

Here is the board /system resource print uptime: 22m33s version: "3.16" free-memory: 112952kB total-memory: 127548kB cpu: "MIPS 24K V7.4" cpu-count: 1 cpu-frequency: 680MHz cpu-load: 8 free-hdd-space: 29752kB total-hdd-space: 61440kB write-sect-since-reboot: 163 write-sect-total:...

The scenario is that router > MT with 2 wifi card > MT conected to other router with 2 networks behind . The idea is to get more traffic for download , nstream is not a solution because i have more download then upload . OSPF maybe or BGP. 2.9.x version of MT. Solved . Just static routing with dual ...

The idea is to use Mikrotik to asign ip addresses only when mac is just on specifik port on the network device. The siwtches will do the rest . In other way said is , dhcp snooping + ip source guard and ip arp inspection to be linked with mikrotik and freeradius

Is there support for irq loadbalancing in MT v3 i see that mikrotik supports smp but is irq loadbalancing working.