MikroTik

ilius168

anybody?

ilius168

greetings all, we have the following setup with 411+ omnitik + SXT it seems to us something might have caused loops, where Rb411 reboots everytime SXT was connected using station-wds mode. (RB411 act as backbone) we have other similar setups using rb433Ah and rb411, also rb411 and rb411AR, all of th...

ilius168

Hi
It would be nice if someone can post it on sites like rapidshare or other.

Thanks

ilius168

aaah, got it...

/import filename.rsc

Done

Problem Solved...

ilius168

Hi all,
Just wondering if mikrotik will accept over 30,000 lines of address list (/ip firewall address list).
i have no success doing this, winbox always disconnect when the address lists were pasted.

Got the rsc files would it help?

Tried on RB1100, RB 1000, and x86 , ROS v5.13.

Thanks

ilius168

Hi, IPv6 works fine with reply-only on the bridge interface but now IPv4 don't work. Seems like it does not reply to ARP requests. I have not done a wireshark yet... same problem here with x86... big headache until i realized what the problem was Dido..RB1100 & RB1000 got the same ARP problem..

ilius168

patiently waiting....

ilius168

Woohoooo, finally available.....

Wonder when it will get here....

ilius168

- Locked up RB 750GL - unable to remote to the router.

- Lights up blinking on all ethernet ports.

- unable to reset

Ready to dismantle the Router and to be sent for RMA

ilius168

I have a link by 29.5 db parabolic antenna and -58dbm signal AP-station bridge Nstreme and Nv2 are active but I have not both side bandwidth stable! I have in one way 30-40mb and both 15/3 Mbps but I need 30mb full dulplex in both side please help me providing more info like distance, band, ccq, si...

ilius168

Hi there,

Is it a real 29DBi Antenna?
for both side?

Regards

it's kbt 30dbi 5Ghz Grid on both side

ilius168

*) snmp - fixed problem where some rows were missed
in a few tables when walking them;

This one is also not fixed yet. Simple queues do not show up correctly in snmp walk.

+1

*sigh* not upgrading our cores still using 4.17

ilius168

yeah, after align antenna I have -53/-53 ccq + - 100%.. BT test groove-groove 97mbps Receive / 97mbps send....of coutre Nstreme best fit 3999 . Now I have a question, can groove generate more data? over 97mbps? because it stops on 97mbps....ccq is still 100%, ping 1-10ms where is the problem? 8) ni...

ilius168

why not to use 802.11n? more data at same channel width. because, there are currently many sites that already on turbo mode and all of their clients are turbo enabled (not supporting 802.11n). hmm seems like we to have to stick with Rb411 and R52/R52H .... and hoping they are not discontinued very ...

ilius168

choose 20/40Mhz on AP device. or did you mean 802.11G ? 2,4G?

yes any 802.11G, 2.4Ghgz or 5Ghz, ie:

N device to connecto to an AP with 802.11G (40Mhz or g-turbo)

ilius168

Uhm, is there anyway to make N devices to work with 40Mhz (G-Turbo) band?

ilius168

Hi Normis,
Would it be possible to send this unit back to MT to get it fixed?
Will pay for it, rather than having a new RB1000 sitting here doing nothing...

Cheers..

ilius168

Looks like your RB600 is now an RB411.

or more like RB414G without POE

ilius168

i really hope this particular 'seller' had a chance flipping thru this topic.
we're sick of contacting them already.

ilius168

any update on this issue sir normis?

ilius168

are you sure you purchased new units, not used/refurbished ?

YES! I paid for new units @ full price!

All other RB1000u units working fine, I still got one unit for own use up and running without problem.

ilius168

It should be about 2008, please check this ticket to support. December 2008 RE: [Ticket#2008122266000067] RB 1000u not booting April 2009 RE: [Ticket#2009042266000133] RB 1000u still not u [...] followed by: August 2010 RE: [Ticket#2010081066000093] Please confirm our RB 1000 units on RMA since last...

ilius168

Dear Normis,
Both units were only plugged in, not even set, i didn't even hear the first beep since arrival.

Cheers!

ilius168

just fyi, we've given up with this particular supplier, it's all regarding RMA and SHIPMENT problems.

I just brought this up thought there might be someone who has the exact same problem, although it's awhile ago.

ilius168

well it's DOA when arrived to us.

and this 195B01FDCD57/840 is the replace unit for it.

Tell me what happened there?

ilius168

the first DOA unit is:

S/N: 195B01FD2A6B/840
MAC: 00:0C:42:20:72:DC - DF

ilius168

Hi normis,
i haven't even used it, just plugged in and the blue light just lit up no booting whatsoever.
and yes sent back new units just the same.

the serial number is: 195B01FDCD57/840
MAC: 00:0C:42:20:96:E0 - E3

this should be in support email too sometime ago.

thanks for responding.

Cheers!

ilius168

Hi guys, Just wondering if someone can help here. I have a RB1000, no respond when plugged in, just blue light, no beep nothing else. Tried new RAM, no improvement. Can't do netinstall, no respond with hyperterminal. Actually this unit was DOS (Dead on Arrival) since a while ago, being sent back to ...

ilius168

groove has 100MBps ethernet interface, so, you can saturate that, and then still have some upload left (25MBps). i can never reach 100Mbps in my setups, even at very close range < 2km, good clean area (no noise), max i get is 80mbps (oneway)TCP, 95Mbps UDP (oneway), once i have it running on both, ...

ilius168

Please make SNMP available for reading second disk usage.

+ current version (since 5.1) unable to capture Disk Usage , Memory Usage using MRTG or CACTI

ilius168

i believe the number of users stated on license levels are about the actual user (like hotspot, pppoe etc)
not the hardware user(device) limiting .

level4=20
level5=200
level6=unlimited

ilius168

Doh!!!
(like homer simpson said....

)

ilius168

It's September.. any updates (launchdate) on RB 750UP yet?

ilius168

Ok, but regardless the price & power, what about its tcp/udp performance.
Should we expect full 100Mbps tcp, if we get the full 200Mbps wireless connection?

thx Normis.

ilius168

Hi,
Just wondering would 711-5Hn be better perform than RB411AH + R52Hn.

Doesn't tell much looking at the info and test result except for the CPU power of each.

http://routerboard.com/RB711-5Hn

http://routerboard.com/RB411AH

Thanks.

ilius168

That's lower than I'd expect from a direct ethernet connection. You using half-duplex for some reason? The test were done one direction. Ethernet is set to 10/100mbps full duplex. It's definitely bottleneck-ed by the cable length (or even the quality of the RJ45). Tested again using factory made UT...

ilius168

Back with test results: Scheme 1: PC to RB1100 (Distance 5km but reported as 7km by Groove) PC-> GROOVE-AP -->><< --- GROOVE-ST <- RB1100 TCP: RX: 67Mbps TX: 34Mbps UDP: RX: 95.8Mbps TX: 37Mbps Groove CPU < 20% RB1100 CPU < 6% Scheme 2: Ethernet Test Cable Length 40m PC-> GROOVE-AP TCP: RX: 68Mbps T...

ilius168

Hi Uldis,
The units are running ROS v5.6.
It's WDS-Bridge mode.

Will try advance with fixed data rate, report back soon.

Thanks!

ilius168

Hi, I have this 5km test link using Groove 5Hn on both side, there are not much interference from either side. The most i'm getting out of this link were 55mbps TCP and 88Mbps UDP (one direction) Comparing to previous setup using 5Ghz - Turbo mode, R52H i can get similar result of 55mbps TCP and 60M...

ilius168

reported about snmp since 5.0, snmp v1 doesn't work but snmp v2 does. some other snmp such as available disk space not working neither in both version........
BUGS??

ilius168

@WirelessRudy
Yes everything is clear!
Big thumbs up for the great explanation thank you.

ilius168

....This last has at least all the advantages you look for in nstreme-dual but with only one radio card.

Does it mean NV2 only uses 1 polarity antenna, while i see many TDMA feature enabled devices use dual polarity antenna that use 2 radio cards.

ilius168

What is the power source for RB 750UP?

what if a device such as RB 800 which needs 48V?
Will it support 802.3af in the future?

ilius168

snmp still not working correctly.
using v5.11, snmp vers1

ilius168

Thanks... yet still no solution... it could be the netbook itself, but strangely, it's only happen to some routers.....

ilius168

Hi, Just wondering if anyone ever experience this: Winbox maximized, but other inner windows remains the same and all other buttons on the top of the status bar are missing. Tried using newer version winbox, clearing cache and roaming files, even reformated my windows xp doesn't seem to help. It onl...

ilius168

ROS v4.7 VAP interface still buggy..... waiting for fixes in v4.8....

ilius168

Ah-ha!!
Found the problem....

the WAN Ip address has to be excluded in src-address..

 1   chain=dstnat action=redirect to-ports=8088 protocol=tcp 
     src-address=!10.21.0.136/30 dst-port=80

Never done this in previous proxy setting, is this a new feature??

ilius168

yes. there are packets. But for some reason the proxy doesn't hits, when using redirecting (transparent-proxy).

Yep, cache on disk, is set

ilius168

Just found out it works, when it's used as non transparent proxy....
Wonder what's wrong with the settings.

ilius168

Hi I have a mt setup for proxy, pretty much standard, NAT, dst-nat, and enable web-proxy. But i see no hit in the status, and browsing is rather slow, compare to no proxy. No changes to size of disk space. Any idea? PS: Running ROS v.4.6 on x86Machine [admin@MikroTik] > /ip fire nat pri Flags: X - d...

ilius168

done! reinstall 4.5 via netinstall, everyth back to normal... phew.

thanks roc-noc

ilius168

Oops, downgraded to 4.6 cpu remains 100%... help!!

ilius168

Hi just had a RB750 tested running v5.0beta1 and have this result: cpu running at 100% since upgrade, everything becomes slow, latency hits 2digit, and 0 traffic when testing were being done, while none of this happens on 4.6. Resource the first 57sec: uptime: 57s version: "5.0beta1" free-...

ilius168

sounds like there is a loop somewhere

ilius168

Did you read what you quoted from my post?

yes i read it and it is much clearer. thank you!

ilius168

NO! two ways miniPCI-e + SIM or USB. SIM card slot won't do anything alone, you need modem! Normis, so what is the function of sim slot? stated in http://routerboard.com/index.php?showProduct=46 RouterBOARD 411U with Atheros 300Mhz CPU, 32MB RAM, one LAN, one MiniPCI, one miniPCI express (for 3G), ...

ilius168

done!

Upgraded to ROS v4.5
Works like charm!!

ilius168

Have to agree with "andreacoppini",

I'd prefer more Ports for RB 1000U, or the daughter board made to fit in a 1U casing, using interface / data cable.

RB 816 looks abit bulky to fit in any network server condition.
(While RB 1000u too empty inside the casing

)

That's only my opinion..

ilius168

Hi, i found the RB 750 & 750G are preloaded with ROS v3.31, is that safe to upgrade? Yes, it is preconfigured with some- ip dhcp and switches. Maybe the reason. Is it safe to upgrade to v4? (as i see many complains regarding RB750 upgrades to v4) What happen if upgrade failed and wanting to retu...

ilius168

just sharing some similar problems... i Have a RB 1000u, upgraded from 4.2 to 4.3, license updated, but it gone crazy, license turns to level 0 and expiring in 23 hours. tried updating the key always failed, always reported invalid key. Until the unit is hard rebooted (Only hard reboot!), will bring...

ilius168

Another quick one to add to the list, when I use the backup command, please backup the Winbox screen arrangement too so I don't have to start rearranging them again when I restore. 7. Have a user configured default layout that can be transported from one RouterBoard to another without having to rec...

ilius168

Hi, I've been using nth & pcc for loadbalancing, pretty much the same config as provided in wiki. Both work well except this, traffic seems to prioritized to the default gateway, this happens using nth and/or pcc configuration. Is this normal or is there anything that i've missed? Using ROS v4.4...

ilius168

had exactly the same problem with 1 RB 433AH and 1 RB 1000u, contacted support, rb433ah fixed with new software key given, but not with the RB 1000u, problem: license expiring within 23+ hours, had to hard reboot (soft reboot won't reboot at all) the unit then it went expiring again and again. upgra...

ilius168

try use wireless-test package.
I believe it's been discussed somewhere....

Hope this help.

ilius168

uhm.... will try that idea....

ilius168

That was according to them.
They did checked with spectrum analyzer.

Did Mikrotik, beforehand, tested all mpci, R52, R52H etc, that the frequency produced is actually true as it is specified (or set) in RBs?

ilius168

Dear all, We are running link on that freq from 2,269Mhz to 2,389 (using superchannel of course), with RB 411A + R52 default TX Power. Few days ago we were visited by a satellite provider authority saying that we are interfering their licensed frequency operating at 2,500-2525Mhz. (One Way Receiver)...

ilius168

Dear Mikrotik, There seem to be some seriuos bugs in v3.25 Brigde setting & wireless interface settings were suddenly gone, back to default. Other settings such as ip address & routes are still there. Happen to us twice of those upgraded RB 411A and RB 493AH. We've upgraded most of our RB so...

ilius168

tried using wirelest-test package?

ilius168

OK. Thanks

ilius168

Hi all, Is is possible to do this on RBs: 1 wireless mpci (such as R52 or R52H and others) which has 2 uFL connector hooked up to two antennas? (for eg: one mPCI for 2 sectoral antennas). From wireless interface we can only see these options: /interface wireless> set wlan_NOC antenna-mode= ant-a ant...

ilius168

Hi all, I'm having trouble getting graphs stored on disk even though "store on disk" has been enabled. Everything went blank after power off (NOT REBOOT). Thanks Flags: X - disabled # INTERFACE ALLOW-ADDRESS STORE-ON-DISK 0 all 0.0.0.0/0 yes

ilius168

Looks great.
Anymore details on those boxes, such as size, weight, etc (not to forget about price of course

) though, preferably in english. Thanks.

ilius168

Some configuration here would be more helpful...

ilius168

2 possibility in my experience: 1. RB 600 unstable, unit reboot unexpectedly, with log saying "caused by watchdog ... bla..bla.. (discussion about this available somewhere in the forum) 2. XR problematic cards, had a few XR5 and XR2 lock up our RBs, replaced with other mPCI the units works fine...

ilius168

webbox seems to be buggy in 493AH as well,

i have several ether interfaces bridged together in different bridges, but i viewed (ONLY VIEWING) those interface using webbox, they turned all interface to bridge1.

regards

ilius168

yes it works perfectly on proliant D360 G5!!

ilius168

Hi, I've just loaded combined-package of 3.25 into RB433 and RB411, that I'm going to install in just a few days, but I've noticed a strange thing... After upgrading, there were only 4 packages installed: ipv6 (disabled), routerboard, routing-test (disabled) and system, nothing more, nothing less.....

ilius168

to use bandwitdh test, both units has to be the save ROS version, ie 3.25.

ilius168

What's new in 3.25:

*) made WinBox work better on smaller screens;

*) WinBox menu is better organized, all sub-menus are sorted;

WELL DONE!!
Should have done this looong time ago....

ilius168

HI Inox,
Is that real traffic or bandwidth test?

What is your cpu usage at that speed?

Regards

ilius168

ROS 3.24 link gone for download?
Or something wrong with the updates??

ilius168

Mine never works running 800Mhz, most units tested, i had to press reset button to get it working again.

While 433AH @ 800Mhs performs just the same as 680Mhz. Some units even reboot itself or need hard reboot when running @ 800Mhz.

ilius168

HI
Found on the changelog:
*) bonding mode balance-alb now works on RB1xx, RB4xx, RB616, RB600, RB750,
RB1000;
*) added '/interface ethernet print stats' command for RB450G and RB750;

Just wondering what is RB 750 and RB 616?

Cheers

ilius168

Just want to report failure to run nstreme using wireless test package on RB 600.

Works fine and great on RB 411A, RB 411AH, RB 433, RB 433AH and RB 333.

Supout.rif file sent to support.

Thanks and great job guys!

ilius168

Are these updates included in the latest ROS Version (3.20) ? Or do we still need to update the wireless-test package?

ilius168

Hi, i'm running a hotspot server and I find that users are able to change their mac address on their os so that they are able to use the network resources via the free-trial feature.

Is there anyway to overcome this while having the free trial feature remains available?

thx

ilius168

I've open the unit, nothing strange. DIP SWITCH showing 2-3 on ON posisiton. All screws are tight. Wiring Ok. 1 fan is running (normal) yes it is DOA, never even a single beep at the first opening, so never ran at all. Done netinstall many2 times, with no success. What do do?? Seems like RMA is the ...

ilius168

I've tried overclocked to 800Mhz on RB 433AH and RB 493AH, and it locked up the RBs to not booting.... and had to do manual booting. If successfully overclocked, the units sometimes reboots not sure if it overheated or something else, and it returns the cpu clock to 680Mhz. So, i'd say 800Mhz is not...

ilius168

Dear Normis, - the lights are up, as normal, meaning the power is up & supplied to the board. - nothing comes up on the serial interface. problem with my first rb 1000u was the power supply hooked up opposite way from the factory. tried netinstall didnot detect the RB at all. Anymore suggestion ...

ilius168

Hi, got an RB 1000u not booting. blue lights up, the eth lights up for 2 secs then off (normal), no beeping sound. What to do? tried netinstall.. but no luck. No suppout file, (not even booting into the system :( ) Thanks! PS: This is my 3rd RB 1000u, 2/3 not working, always need extra effort to get...

ilius168

problem dissapeared when the unit is rebooted, but not for long (few days).

tried 1 gb card, up time 2days with no errors, so shall i be suspecting a defect micro-sd?

will keep monitoring....

ilius168

the micro-sd card keepn on dissapearing on me....

sometimes invalid

ilius168

Hi, I'm trying running web-proxy on RB 433AH with internal disk (micro-sd), but having trouble, the web doesn't load at all, while loading very slowly when using proxy directly to the browser (non-transparent). Configuration all standard, enabling ip proxy, redirect port 80 traffic to proxy port (31...

ilius168

MY 433AH doesn't seem to recognise the microSD or is there something i have to do before using it? Done disk format but status remains invalid. Any suggestion? I'm running ROS 3.16 latest firmware, 4Gb SanDisk MicroSD. Thanks /store disk> pri Flags: S - system # NAME TOTAL-SPACE FREE-SPACE STATUS 0 ...

ilius168

I have pretty much similar config to the setup but i used mangle-route mark instead of DST-NAT (it works both ways).

though I'm having trouble capturing the traffic from proxy using mangle rule + simple queues.

ilius168

Simple question, but no one interest to answer it. Thanks similar questions being asked many times, that maybe why :P 1. Installing ROS via CD.ISO will not cause to loose SOFT-ID, unless you do low level format on the Disk (CF or HDD) 2. Reconfigure the box all over from beginning, will not change ...

ilius168

http://wiki.mikrotik.com/wiki/Software_levels

ilius168

speed.jpg very cool speed with 3.15 - even more then the eths are built for on the rb532 ;-)) this showed at least as log as it took me to see it and make a screenshot ... it has slowed down again ;-( I think this has been buggy since 3.10, it happens especially when the unit is rebooted, last for ...

ilius168

sounds like another defect unit of RB 600's

http://forum.mikrotik.com/viewtopic.php?f=3&t=22265

ilius168

Check the output from console, perhaps you can reinstall RB1000 with netinstall.

thanks. It works now. by doing hard reset more than 6 times...

ilius168

HI all,
My RB doesn't reboot after power failure. It only beep once, the green light come up once then off as normal, the blue light is on.

Tried netinstall but didnot detect anything....

:panic mode on:

ilius168

Thx. But i finally reset the unit and it seems normal now. I did suspect the proxy stored something without my knowledge :D because i did use internal proxy with parent proxy, but disabled it has been disabled then. Here is the proxy setting from my backup /ip proxy set always-from-cache=no cache-ad...

ilius168

="Montana"I have changed my computer to Ubuntu 8.04 desktop and have installed Wine 1.0 along with Winbox 2.2.13 Well every thing seem to get started but I cant connect. Winbox starts, I put in the address and it said it was connecting but it never does, it just times out. Mike had the sa...

ilius168

http://forum.mikrotik.com/viewtopic.php?f=2&t=25433

ilius168

Hi. I have a RB 433AH for loadbalancing 4 upstream using mangle(nth) and mark routing(eth1). Also a route to proxy server (eth2). Distributing at ether3. It seems somehoe the disk usage adds up very quickly (to 100%), while cpu usage and memory usage are at its moderate (25% & 34kb). Is this con...

ilius168

what kind of 'optimised' windows is that? 100MB installed??

where do i get it?

ilius168

Has anyone experienced a hot RB411AH? I'm testing a RB411AH indoor, standard setups for a wireless station mode and bridge. It rebooted itself once, when i checked, the heatsink was very hot to touch, even to the board. Is it normal? (this is my only one indoor RB411AH, the rest are outdoor, so neve...

ilius168

i have two words for you.. Asus eeePC

don't mind me asking, which type of eeepc you are using? Thinking of getting one for myself, maybe the 4G series, but worried that it doesn't take windows xp on the little space (4GB).
Cheers

ilius168

changelog.jpg

ow, i'm blind...

Thx!

ilius168

did you contact support as recommended?

Yes, and i got responds, that i might have a bad hard drive, tried reformatting and did not fix.

The log appears to be random, once unit is rebooted, then it's gone for awhile and comes back for maybe 100lines then disappeared again.

ilius168

exactly the problem i'm having with winbox.....

ilius168

Hi, I want to see the changes of v.3.14 but couldnt find the change_log file anywhere. ANy idea? I'm having trouble with simple queues, whenever i mistakenly enter the parameters, simple queues simply not showing any traffic nor counter. but if it hits max then color still goes red (meaning, the sim...

ilius168

A NEW QUESTION

1. current ROS version is 2.9.x shd i change it to 3.13 which one is better and more stable for point to multipoint connecttions.

doesn't RB 4xx already come with ROS v3.x??
I fine v.3.10 the most stable.

ilius168

nice explanation, thank you!

ilius168

have a look here

http://wiki.mikrotik.com/wiki/Bruteforc ... %26_SSH%29

ilius168

Don't be confused....read and understand.

reading....

ilius168

gateway-state=reachable,unreachable This means ether4 is unreachable. Are you using check-gateway on that route ? It can't be blue otherwise that route isnt active in the first place. actually both were reachable, dunno why when this was copy pasted as unreachable then.... :-? 4 A S ;;; Modem 2 dst...

ilius168

@ changeip I did try the gateway interface feature, assigned an interface to the gateway. But the mikrotik always by default choose the interface where the ip should belongs. say, i have this ip: 124.47.10.11/24 at interface ether1 and the gateway 124.47.10.1 (default) 124.47.10.21/24 at interface e...

ilius168

unfortunately the wan IP address is assigned by the ISP automatically, so that we could not changed the ip. JFYI, these modems are provided by the same ISP, because of each modems are the same package plans (ie 4mbps each modem), they are set to go to 1 gateway (in this case: 125.47.10.1) It's meant...

ilius168

so an extra router is a must to get another set of ip to make it different from its original ip (network)?

ilius168

Following is the rough drawing of the network. http://img134.imageshack.us/img134/521/net1ob8.th.jpg traffic always go thru ether1 eventhough i set the gateway interface. note: it is now four modems with 1 same gateway, meaning i have to use 3 mini router to overcome the problems, which is pretty wa...

ilius168

so is there anyway to overcome the latency problem when using nstreme?

cos' we have users that is all the time looking at the ping time and started complaining, but in fact the ping time doesn't always effect internet (cmiiw).

ilius168

HI all, Anyone has experienced this: Whenever the limit in simple queue is set, the graphic showed no traffic, but the actual bandwidth is limited accordingly to the limit set in the queue until the router is rebooted. (it even not captured in MRTG) Running ROS v3.13 on RB 1000u. Same thing happenin...

ilius168

knew that

ilius168

What is the actual power of R52 & R52H? When it is set to default, it stated max was 19dBm @ 1mbps to lowest, to 16dBm @ 54mbps. While on R52H max was 25dBm @ 1mbps to 17dBm @ 54mbps. Does that means the R52 max txpower @ 19 dBm which is around 80mW and R52H Max @ 25dbm (320mW) But somehow in mo...

ilius168

any news regarding web proxy development? still getting the same error message here.... 10:44:08 web-proxy,error stat('/var/cache/7/da/7da1c4e6db16723e14f58b1acc8b4d09' ) failed: Input/output error 10:44:09 web-proxy,error stat('/var/cache/7/df/7df00207d7f7593e2b4cce20d9295641' ) failed: Input/outpu...

ilius168

wew, it won't even work installing fresh from ISO to my CF, it finished installing all the stuff it needs then reboot, i only see Loading system with initrd Uncompressing Linux... Ok, booting the kernel that's it. Doing the same after reinstalling. the bug is getting bigger since 3.11 :D need a bett...

ilius168

Same here i have got a few RB411A connected using CM9 (and many other) cards. It seems like the latency gone unstable with nstreme enabled, from 1 digit to sometimes 3 digits, while it's stable at 1ms without. Though throughput is much higher with nstreme. Is there any setting i need with nstreme? A...

ilius168

Greetings, I have these messages on my x86 using ros 3.11. What does it means? No such messages when using ros 3.10. Thx ) failed: Value too large for defined data type 05:35:48 web-proxy,error stat('/var/cache/7/bf/7bffcca3723aec020e7272d34d8d20bc' ) failed: Value too large for defined data type 05...

ilius168

You need to open the rackmount case and unscrew the board from it and on the bottom you will see the second CF slot. ow so the one on the bottom will be permanent? would it be nice to have an sata/ide converter, so we can have a hdd inside the empty rackmount casing. or make a daughter board for ex...

ilius168

As the topic says,

where can i find the second CF slot for RB 1000u?

ilius168

Hi,
How to make columns to appear permanently in winbox?
So that it appears on winbox everytime it's started.

eg:
I want to show column Rx and Tx in simple queue but permanently.

Thanks!

ilius168

I got info from our supplier, saying that RB 600A is not to be produced possibly until august, and might discontinue. :-/
---

ilius168

Heard that RB 600A is discontinuing?
Can someone from routerboard.com (mikrotik) confirm this? ??
Thanks.

ilius168

I too got problems with v3.11:

1. the x86 machines get kernel panic message after rebooting form upgrade.
2. this script doesnt work in netwatch, while it works in ROS v3.10 and below

/ip route set [/ip route find comment "Route 2"]  disable=no

ilius168

Just wondering if we can set a user with minimum right just for dude (monitoring) purposes. But what is the minimum rights? tried read (standard), the dude become stall.

ilius168

Please excuse me for being dumb. I'm trying to use the dude client, set up a few server out of a sudden it seems crashed. (the scroll bar doesn't stop moving) and i had to do task kill via task manager. then restart the dude, but it keep on connecting and disconnecting until i ask for reset. PS: (On...

ilius168

yes i have installed dude3.08b, but couldn't see Users

ilius168

uhm... where to find Dude interface?

ilius168

Greetings all,
I've just added dude package into my ROS (v3.10) and new to using dude.
It ask for username and password when i entered: http://R_ipaddress/dude
i did and it just stays loading.....

Do i need to setup anything before to be able to access the dude webserver?

Thanks!

ilius168

Hi I have RB 44G installed on 1 of our router. It's doing something strange: 1. Router become frequently rebooted (30minutes average) 2. The traffic reading can reach >100Mbps even the real traffic was only 1-2Mbps. 3. DHCP Clients don't bound automatically, must do disable/enable trick on the inter...

ilius168

nothing happens when using serial cable. not sure if i did it wrongly.

I was using hyperterminal underwindows tried all popular baud rate. but no response neither....

ilius168

Manage to get some up and running by using netinstall, but 4 units were still not booting. Although it beep but netinstall did not detect its existence.....

Still no reply from mikrotik yet....

ilius168

HI, I have got one batch of RB 411 (10pcs), all could not reboot, both green & blue lights are up. These units were previously tested and upgraded ok. Tried netinstall, it took along time to install a npk file, ended up with "Installing failed" Sent email to support, but got no reply t...

ilius168

Has the compression feature in wireless been missing in RB 433?

ilius168

Nice one!!

ilius168

ilius168

anybody please.... it's annoying, that i have to restart the router to get the dhcp setting to appear (in winbox or telnet)......

i'm using RoS 3.10, with 3 dhcp-client setup.

ilius168

Hi I have 3 dhcp setup for 3 interfaces. I'm having trouble getting dhcp setup to appear in winbox nor in the terminal (like the ROS hang, but it's not), but it is fine when there are only 2 interfaces. is this mikrotik bugs? thought there's a fix in 3.10 *) fixed bug - DHCP server did not return DH...

ilius168

wrong room, can someone move me please ...

ilius168

Hi All, I have 4 cablem modem that i want to feed into 1 router (mikrotik), all modem are DCHP mode. First two modems are fine, because they have different gateway, but when i feed the next modem, it's got the same gateway as the second modem, last modem has the same gateway as the first. I'm using ...

ilius168

Yes, make sure they are running 2.9.51 first before upgrading.

ow? why is that?

ilius168

wow

It works!

thanks!

But i wonder if mikrotik/routerboard were not testing it before deploy.....

hm....

ilius168

Hi all, Just got my first RB 1000u. nice packed unit. But it's doesn't fired up? WHen i checked it has a 12v-3A adaptor in it, measured it was correct. and did not turn on. then i switch to 24v 3A adaptor, it works. Is RB 1000u meant to use 12 v or 24v? It stated 12v on the website..... :-? Any comm...

ilius168

Hi all,

I'm currently do loadbalance using routing mark, just wondering if MT can do loadbalance dynamically? Like hardware loadbalancer.

It'd be nice if there's any directions or tips, thanks!

ilius168

anybody with some answer?

multiple wan with one proxy anybody?

ilius168

You should mangle first traffic that is running on known ports, like HTTP, MAIL etc. Then mangle all other traffic an make priroity. It's one way of doing. But isn't that there're too many ports that need to be marked (eg, gaming ports) and won't lots of mangle rules make the cpu works more? Thanks...

ilius168

14 ;;; Mark P2P Traffic
chain=forward action=mark-connection new-connection-mark=P2P - Conn passthrough=yes
p2p=all-p2p

Make the chain=prerouting

Done that, not working neither...

ilius168

HI all, I've been struggling with P2P traffic limiting, somehow some traffic were not trapped (mangled) why? When i do torch, there are alot of ports > 6000, most likely P2P. Checked with client, that they are using limewire. Using ROS v. 2.9.51 (not in hurry to move to v3 as yet:D) Thanks. here is ...

ilius168

HI
Can the SODIMM RAM on RB 1000 be upgraded to 1GB?

I'd appreciate any comments thx!

ilius168

I expect WINBOX should not force user to use big screen right? imagine you have a space in the rack that's only fit a 14inch monitor if everyone have to fully learned command line, the what's the use of winbox? .....come on..... :P it should be easily fixed, just move the submenu to the centre of th...

ilius168

.. especially for v3 ROS with full packages installed..... the main menu seems to be more than v2.9... can see the submenu (from TOOLS or SYSTEMS ....) even with big screen....

any comment mikrotikers?

EDIT: I'm Using WINBOX v. 2.13

ilius168

I wonder if someone ever notice that it is somehow difficult to use winbox on any crt lower resolution screen than 1024x768. for example: Tools menu, i am unable to find netwatch because of its location place right on the bottom of the screen. the last submenu from tools is pingspeed, can't see the ...

ilius168

Hi

How to check/monitor Second Drive for Proxy?

As in capacity used, left, health etc...
even graphing for the drive.. like disk usage for the system drive..

Thx!

PS: Is it possible to have 1 proxy with multiple WAN?

ilius168

are you sure we can do the scan by using telnet?

Doesn't the station disable wireless connection before it started scanning? (meaning can't do it remotely, VIA wireless connected network)

ilius168

Used 8602 (AR5312), 3601/3602 (AR5212) without any problem.
Is it true 411 doesnt support older chipsets? I don't see that written in the user guide.

ilius168

I've got XR 5 operating at 5,600Mhz, it's true what CarulloS said that the scan list has to be entered manually (smaller ranger) on the station side, or else it wouldn't connect at all (or at least takes long time to associate). However I've used 28v 2.5A adaptors when using XR5, i find it's perform...

ilius168

THe RB 600 started more regularly now, BIOS upgraded to 2.14, ROS 3.7
ANI turned off....

it's believed to be defect unit... let's see what happen after we get a new RB600....

HEADACHE.....

ilius168

try to switch off ANI in wireless card

What's ANI?

ilius168

my RB 600 rebooted again after 12h uptime, firmware upgraded to 2.14, but it seems to be rebooting more regularly now...

Sent an email to support.

Need your help, please. Thx

ilius168

My RB 600 done the same, but it seems to happen on station side. I'm on ROS 3.7, BIOS 2.13 uptime 4h. Had 8d uptime before last (thought it fixed the reboot problems) While on AP side, i have 8d uptime since BIOS Upgrade . Had experienced none reboot problem (even before BIOS upgrade). Just upgraded...

ilius168

Mine also did the same after upgrading to 2.13, ROS V. 3.7
Happened only on station side.

jan/01 07:00:05 system,error,critical router was rebooted without proper shutdown by watchdog tim
er

ilius168

so i supposed the problem is the same as

http://forum.mikrotik.com/viewtopic.php?f=7&t=22868

Strangely enough that it only happen to station side, never happen on AP.

I'll try upgrading then. Thanks!

ilius168

Hi all, My routerboard (RB 600) rebooted itself for no reason, and have this message on its log: 07:00:05 system,error,critical router was rebooted without proper shutdown by watchdog timer While i checked, it is appeared to be there by default on all of my RB 600. Is this the right setting shall i ...

ilius168

i find that when using nstreme loaded with traffic, latency becomes stable.

---
but would anyone suggest what is the best setting for using nstreme?

ilius168

I have a MT 2.9.50 proxy enabled on 40GB HDD, 512RAM, Pentium IV but i'm wondering why it doesn't used up the whole HDD space, show on mrtg it only uses 29.8Mib. Here is my proxy setting, i see the "reserved for cache" is only upto 30MB, how to change that? enabled: yes src-address: 0.0.0....

ilius168

My RB 133 first rebooted and set. But after shutdown (with shutdown command) the unit became not bootable. Both blue and green lights are on, no beeping, Trie reset & soft reset, but doesn't help. Does it mean it's dead? Can i user terminal to make it alive again? Too much trouble to send it out...

ilius168

ah .. it works thank you!

but... can it be erase just 1 or a few lines?

ilius168

have u tried untick "load previous session" in winbox loader?

ilius168

is this a command line or instruction??

where can i set store line?

ps: i'm using 2.9.49

thx

ilius168

Hi, how to erase log created?
Saw the instruction somewhere, but forgot where...

No luck with search...

thx

ilius168

what happen if an RB breakdown and got replaced, while a superchannel license was installed seperately (not via the reseller) in the RB before replacement?

ilius168

hum... I'll do some drawing & post them here, might explain the questions better.

Thanks

ilius168

or else, nobody would buy Level 4 Licenses

ilius168

There're a few software that can do the job, free or paid.

checkout:
http://www.alepo.com/isp-billing.shtml - paid

or search for cwisp2 - free (under linux)

and many more

ilius168

Hi, Our provider has given us Point to Point Public IP Address (/30), and a few blocks of Public IP Addresses, consist of /29, /28, /27 subnets. So that they let us to the bandwidth managing on our own to each ip addresses, with the gateway of each client are actually in our router. My question is, ...

ilius168

Great, it works!!

ilius168

Slow =

- loading the os, from start, slower than using 2.9.46 (it's original)
- after os loaded, telnet to the unit takes longer then 2.9.x
- in winbox, it takes a while to display everything up (such as interface information, traffic, ip addresses, even slower when there're queue set-up.

ilius168

RB133 very slow with v3.0, is this normal?
Tried on a few RB 133 (& c's) all the same, slow...

Thx

ilius168

I got the same problem with 'some' of my RB 333, everytime i changed setting, the RB reboot itself after the changes were applied.
It happened ONLY when using winbox. it's fine with telnet.
Using 18V adaptor with NMP8602 mPCI, firmware upgraded to RC10 & RC11, from its standard RC4.

ilius168

Damn... samething here......

Upgraded (thought to be an upgrade!!), my RB 333 with new licence (asked for superchannel) but given a level 4 license. Now my RB333 have only 23hrs left with 0 level.

What to do... can't wait for 3-4 business day..... please help.

Thanks in advance!

ilius168

The problem may not be the pps capability, it could be just the throughput problem. Currently the traffic never hits as high as 75,000pps, max that we've observed were <2000pps (around 800-900kbps). No firewall running, just plain routing & simple queue for 5 ip addresses, just for graphing purp...

ilius168

Hi thanks all for the tips! Had traffic load of 800kbps, ping stays at 1 digit. Using 2.4Ghz-only-G band with superchanels seems to work. CCQ is 100%/98% most of the time. Bandwidth tested 28mbps oneway while average 13mbps on both tx/rx. (too bad, G-Turbo mode doesn't work on my RB 333) traffic = t...

ilius168

I'm using NMP8602 mPCI on both PC Router and my RBs. Same mPCI same chipset. Both operating using superchannel frequency mode (i assume there's no country restriction on this mode right?). Here are some info on PC Router, v.2.9.38 0 interface-type=Atheros AR5413 chip-info="mac:0xa/0x5, phy:0x61...

ilius168

Oops, wrong room, can someone please move my post to wireless section?

ilius168

Hi All,
just realised, 2.4GHz-G-Turbo mode has been missing in RBs, but available when using PC Router with wireless PCI (AR5413 chipsets), v.2.9.27 & 2.9.38

Can someone from MT please confirm? or if there're settings that i've missed with RB?

Thanks!

ilius168

We had about 43-45 calls when it hits 700kbps, but sometimes 63calls but most calls dropped because the latency hits 3 digits stable.... :( Haven;t noted the pps, but i'm sure it;s pretty high. I'll check again. Use pc routers with same mPCI signal strengh was the same -39db - -45dbi, higher thruput...

ilius168

i'm only operating it on 18db tx power.

using NMP8602 mPCI...

Search found 255 matches