it's kbt 30dbi 5Ghz Grid on both sideHi there,
Is it a real 29DBi Antenna?
for both side?
Regards
*) snmp - fixed problem where some rows were missed
in a few tables when walking them;
This one is also not fixed yet. Simple queues do not show up correctly in snmp walk.
yes any 802.11G, 2.4Ghgz or 5Ghz, ie:choose 20/40Mhz on AP device. or did you mean 802.11G ? 2,4G?
or more like RB414G without POELooks like your RB600 is now an RB411.
YES! I paid for new units @ full price!
are you sure you purchased new units, not used/refurbished ?
Does it mean NV2 only uses 1 polarity antenna, while i see many TDMA feature enabled devices use dual polarity antenna that use 2 radio cards.....This last has at least all the advantages you look for in nstreme-dual but with only one radio card.
1 chain=dstnat action=redirect to-ports=8088 protocol=tcp
src-address=!10.21.0.136/30 dst-port=80
yes i read it and it is much clearer. thank you!Did you read what you quoted from my post?
thanks. It works now. by doing hard reset more than 6 times...Check the output from console, perhaps you can reinstall RB1000 with netinstall.
don't mind me asking, which type of eeepc you are using? Thinking of getting one for myself, maybe the 4G series, but worried that it doesn't take windows xp on the little space (4GB).i have two words for you.. Asus eeePC
ow, i'm blind...
Yes, and i got responds, that i might have a bad hard drive, tried reformatting and did not fix.did you contact support as recommended?
doesn't RB 4xx already come with ROS v3.x??A NEW QUESTION
1. current ROS version is 2.9.x shd i change it to 3.13 which one is better and more stable for point to multipoint connecttions.
reading....Don't be confused....read and understand.
/ip route set [/ip route find comment "Route 2"] disable=no
Yes, make sure they are running 2.9.51 first before upgrading.
Done that, not working neither...14 ;;; Mark P2P Traffic
chain=forward action=mark-connection new-connection-mark=P2P - Conn passthrough=yes
p2p=all-p2p
Make the chain=prerouting
What's ANI?try to switch off ANI in wireless card
jan/01 07:00:05 system,error,critical router was rebooted without proper shutdown by watchdog tim
er
[admin@MIKROTIK] /system clock> pri
time: 07:10:46
date: jan/01/1970
1 ;;; Limit connection to 5
chain=forward action=drop tcp-flags=syn src-address=192.168.1.119
protocol=tcp connection-limit=6,32
Unfortunately, i got a NATted IP address of 10.11.1.154 while gateway ip is 10.11.0.1oAnd I don't think the DVB provider gives private IP cause you'll need a public IP address to route their downlink.
Your Screwed...
thinking of everyone is using translator?fungsi ppp secret di mikrotik apa yak ?
fungsi pptp-server n pptp-client di mikrotik apa ?
thks
What if the ISP is not friendly with BGP ?I do this but you need BGP (or your ISP's help)
Filteres need to be open for both ISP's for your IP Range