/routing bgp advertisements get [find peer="XXX"] value-name=prefix
[admin@xxxxx] > system ssh address=192.168.5.3 user=root
Welcome back!
It would be great, one "like" for udpxy.integrate udpxy. Very useful for IPTV over WiFi for home users.
ISP 1 --- ---- WAN 1
SWITCH ---- PC
ISP 2 --- ---- WAN 2
Hi janisk, Do you have any new informations for me? Thanks...thanks for report. working on a fix
[admin@MikroTik] /routing igmp-proxy> pri
quick-leave: yes
query-interval: 2m10s
query-response-interval: 10s
72-76 Mbps TCP, FTP transfer!!!Hi,
if you have 72-76 Mbps, it must be UDP, not TCP.
The RB433AH can deliver (in my tests) about 60-63 in TCP max.
anwer is not real. There is somany links with nstream and version 2.9 and ping is very stable (1-5 ms on 20 mbita troughpt). But, this is my firt link with version 3 and nstream and ping is very unstable on empty link.Question has already been asked an answered.
Can you explain me how could I imitate number of PPPoE connections in bridge filter?You can run PPPOE server on bridge interface. This will allow you to use bridge filters where you can successfully drop or limit pppoe discovery packets.
Just two CM9.There are only 2 possible reasons for that:
1) insufficient power - are you using XRs or all 3 SRs?? Then you should find more powerfull power adapter, or go for RB600
2) Software crash - in this case guys from MT will be able to see it in the (auto)supout.rif file
this is outdoor, about 3-9 km between every unit.Hi, there is possibility that cards are interefering.
I've seen it on PC's with tplink cards.
Do you make lab tests or it is outdoor ? If it's indoor, try to lower tx power.
mt1 = 5425 MHzMt2 and MT3 - does they use non-interfering channels?
MT1 and MT4 have 1 wlanHow many wireless interfaces do you have on each node?
This looks typical of single-interface nodes with WDS