Community discussions

MikroTik App

Search found 145 matches

by happydaddy
Sat Jan 25, 2014 8:20 pm
Forum: Scripting
Topic: Afraid.org dns script using specific wan port
Replies: 12
Views: 4326

Re: Afraid.org dns script using specific wan port

I know that but wile i am running the script should i not see it come and go?
by happydaddy
Sat Jan 25, 2014 10:53 am
Forum: Scripting
Topic: Afraid.org dns script using specific wan port
Replies: 12
Views: 4326

Re: Afraid.org dns script using specific wan port

Tried it but when i run the script no route is added.
by happydaddy
Wed Jan 22, 2014 5:59 am
Forum: Scripting
Topic: Afraid.org dns script using specific wan port
Replies: 12
Views: 4326

Re: Afraid.org dns script using specific wan port

Freedns.afraid.org now for me is 178.33.33.231 So you can do this: /ip route add dst-address=178.33.33.231 gateway=1.1.1.1 Change 1.1.1.1 for your wan3 gateway Send from my mobile phone using Tapatalk. I guess this might work if you where only updating 1. In my case I have 3 wan ports I need to upd...
by happydaddy
Tue Jan 21, 2014 7:31 pm
Forum: Scripting
Topic: Afraid.org dns script using specific wan port
Replies: 12
Views: 4326

Afraid.org dns script using specific wan port

Hi guys I am trying to update my dns address for a specific wan port and would like to know if its possible with wget script. I have a 3 wan ports and would like to update address of wan3. Wan1 is my first route which means every time i run the script wan1 ip gets sent to afrad.org. Any way i can th...
by happydaddy
Thu Nov 21, 2013 12:32 am
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

Re: pcc load balance uneven upstream connections

Possible Sollution below for the packets being blackholed 1.2.3.4= WAN ip 192.168.1.10=server 192.168.1.0/24 Lan IF you have wan ip which changes add a script to resolve host. Do not add in-interface only use WAN IP. # DST-NAT rule to redirect port 3389 from /ip firewall nat add action=dst-nat chain...
by happydaddy
Thu Nov 07, 2013 7:53 pm
Forum: General
Topic: Hotspot setup with Radius Manager
Replies: 7
Views: 4414

Re: Hotspot setup with Radius Manager

Hi

Can you post what you done to overcome the problem? I have the same issue, only thing is i just opened port 443 which works but i got some unwanted traffic coming through as well now.

Cheers
by happydaddy
Thu Sep 12, 2013 11:13 am
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

Re: pcc load balance uneven upstream connections

No src ip, no dst ip, no port
chain=srcnat action=masquerade 
by happydaddy
Thu Sep 12, 2013 8:37 am
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

Re: pcc load balance uneven upstream connections

Have you tried NOT specifying a out interface on your masquerade rule. With mine now set with no out interface things work pretty fast. Will update if there are any problems.
by happydaddy
Wed Sep 11, 2013 6:02 pm
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

Re: pcc load balance uneven upstream connections

Ok just and update not sure if its going to work properly but accessing my internal network from outside seems to work better when i did not specify a out interface on my masquerade rule. /ip firwall nat srcnat action and masquerade and no out interface. will it cause problems if i dont specify a ou...
by happydaddy
Thu Sep 05, 2013 10:22 am
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

Re: pcc load balance uneven upstream connections

Ok so if i understand correct you have a web server and other pc's on a specific nas and you want other pc's to be load balanced and web server to stay constant wan. Are you using masquerade on the nas router to get to the wan which im assuming is on another router? If so the wan router sees the req...
by happydaddy
Thu Sep 05, 2013 9:14 am
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

Re: pcc load balance uneven upstream connections

Hi I found a way to get internal ip's to use specific wan's. I used this mangle rules in the wiki below before i sent the rest of the ip's to be balanced. http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways I only created a group A and sent all my dedicated ip's straight to wan1. The...
by happydaddy
Mon Jun 17, 2013 9:48 pm
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

Re: pcc load balance uneven upstream connections

Glad to hear. hope someone can help me with mine. I think the reason why your one works better is because you are using "both-addresses-and-ports" in your per connection classifier. i don't think you need to duplicate the per connection classifier. The key in your case may be the use of ad...
by happydaddy
Sun Jun 16, 2013 11:59 am
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

Re: pcc load balance uneven upstream connections

i have added my config. i use pppoe on mikrotik and just renamed the pppoe connections as WAN1 2 and 3. not sure perhaps this is why i cant add another pcc connection to mangle to add load to wan 3. perhaps the pros can enlighten. In most example there are ip's used. This rule i cant add as my desti...
by happydaddy
Sat Jun 15, 2013 11:38 am
Forum: Forwarding Protocols
Topic: pcc load balance uneven upstream connections
Replies: 21
Views: 11865

pcc load balance uneven upstream connections

Hi I have three adsl lines which i load balanced with pcc. It works well. 2 lines speed is 4 megs and the 3rd is 10 meg. When i add another pcc connection to add more weight to wan 3 nothing happens. i added a picture showing no traffic on the last pcc connection on wan 3. is this normal or am i doi...
by happydaddy
Mon Mar 18, 2013 11:39 pm
Forum: Forwarding Protocols
Topic: TE tunnel for voip
Replies: 2
Views: 1757

TE tunnel for voip

Hi I am following this example. http://wiki.mikrotik.com/wiki/Manual:Simple_TE to achieve my voip traffic to go through one direction and normal data through another. I have successfully setup as per wiki. tunnel works great. However i only seem to be getting tx but not rx over the voip te tunnel. h...
by happydaddy
Tue Feb 05, 2013 10:53 pm
Forum: Forwarding Protocols
Topic: load balancing eoip pppoe over ospf network
Replies: 0
Views: 1229

load balancing eoip pppoe over ospf network

Hi I have a wireless network running ospf with 3 adsl's at different sites.I have enabled redistribute default routes if install as type 1 on all 3 sites. Internet routes to closest break out. Now i am planing to install a squid proxy and wanted all default routes to come from one router. i wanted t...
by happydaddy
Tue Feb 05, 2013 10:02 pm
Forum: RouterBOARD hardware
Topic: RB750 CPU Usage Problems
Replies: 25
Views: 14292

Re: RB750 CPU Usage Problems

Seems a overkill to replace a rb750 with a with a rb1200. i just need pppoe, ospf and hotspot. For now i set all my routers to reboot every night which seems to help a bit. I have one router though that keeps locking up every morning even if i reboot it. Could multiple dude servers have an effect? P...
by happydaddy
Sat Jan 26, 2013 10:57 am
Forum: RouterBOARD hardware
Topic: RB750 CPU Usage Problems
Replies: 25
Views: 14292

Re: RB750 CPU Usage Problems

tarcius... Have you found a solution to this problem? I have the exact same issue on my routers.
by happydaddy
Sat Apr 28, 2012 12:07 pm
Forum: Forwarding Protocols
Topic: ospf loop inside a loop
Replies: 1
Views: 1252

ospf loop inside a loop

Hi All

I have a ospf network which works well all in one backbone area. All the routers are running in a circle for redundancy. My question is will it mess up my network if i link up routers 1.1.1.2 to 3.3.3.1 in diagram below?

Image

Thanks
by happydaddy
Mon Apr 16, 2012 1:49 am
Forum: RouterBOARD hardware
Topic: Omnitik in 2.4Ghz?
Replies: 9
Views: 5673

Re: Omnitik in 2.4Ghz?

+1

I am using 5ghz ubiquity as backbone and mikrotik RB433 as hotspot and routing. Save me efforts of making up a routerboard wirelesscards, lmr cable, antennas etc.

Please make a 2.4 if possible.
by happydaddy
Tue Feb 07, 2012 5:29 pm
Forum: General
Topic: Radius Extra Sessions when OSPF Kicks In
Replies: 6
Views: 2529

Re: Radius Extra Sessions when OSPF Kicks In

Yes I guess when the route goes down the Radius session is not closed. But I would like to have it closed because it's leading to lots of accounting issues.
What solution did you use. I seem to be sitting with the same problem.
by happydaddy
Tue Feb 07, 2012 12:07 pm
Forum: Forwarding Protocols
Topic: Tunnel or not to tunnel ospf radiusmanager
Replies: 0
Views: 975

Tunnel or not to tunnel ospf radiusmanager

Hi I have a wireless network running ospf with radiusmanager. my whole network runs in a circle so all router connected together. Clients connects to AP routers via pppoe server, authenticates to radiusmanager...no problem. However when they reach there data limits they do not get disconnected when ...
by happydaddy
Mon Sep 26, 2011 1:03 pm
Forum: Forwarding Protocols
Topic: port forward
Replies: 3
Views: 2809

Re: port forward

/ip firewall export /ip firewall connection tracking set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s \ tcp-close-wait-timeout=10s tcp-established-timeout=1d \ tcp-fin-wait-timeout=10s tcp-last-ack-timeout=10s \ tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncoo...
by happydaddy
Wed Sep 21, 2011 2:53 pm
Forum: Forwarding Protocols
Topic: port forward
Replies: 3
Views: 2809

port forward

Hi I am trying to port forwad radius packets to my radiusmanager server from the wan port . i have used this example and ssh works but not radius. http://wiki.mikrotik.com/wiki/Forwarding_a_port_to_an_internal_IP I forwarded 1812, 1813, and 1700 to my internal radius server but no luck i can see pac...
by happydaddy
Fri Sep 16, 2011 8:35 am
Forum: The User Manager
Topic: CPU 100% userman 5.5
Replies: 6
Views: 2547

Re: CPU 100% userman 5.5

Moved to Radiusmanager....after a few tweaks running stable on a mikrotik based network.
by happydaddy
Fri Sep 02, 2011 4:51 pm
Forum: General
Topic: RouterOS + Radiusmanager and NAS/Remote Disconnections
Replies: 5
Views: 5135

Re: RouterOS + Radiusmanager and NAS/Remote Disconnections

ok found a tempory fix.Hopefully one of the experts can shed some light. The error i was getting was: 16:12:17 radius,debug received remote request from 10.0.2.1:1258 with unknown address, dropping this error was generated from router ip 10.0.2.2 when my client was supposed to be disconnected from P...
by happydaddy
Fri Sep 02, 2011 4:30 pm
Forum: General
Topic: RouterOS + Radiusmanager and NAS/Remote Disconnections
Replies: 5
Views: 5135

Re: RouterOS + Radiusmanager and NAS/Remote Disconnections

Hi

i am having the same problem on my mikrotik ospf network. Is there a solution to this ?

thanks
by happydaddy
Sat Jul 30, 2011 10:26 am
Forum: Forwarding Protocols
Topic: ospf and load balance 2 dsl's in different locations
Replies: 2
Views: 1582

Re: ospf and load balance 2 dsl's in different locations

Is there a script that could check pings to Google and reroute internet traffic to the 4 meg adsl? Perhaps the script could make the cost higher on one interface to change its direction?
by happydaddy
Fri Jul 29, 2011 1:29 pm
Forum: Beginner Basics
Topic: MIkrotik OS Raid Support
Replies: 12
Views: 8358

Re: MIkrotik OS Raid Support

Will it backup Usermanager as well or just the system settings?
by happydaddy
Mon Jul 25, 2011 5:26 pm
Forum: The User Manager
Topic: CPU 100% userman 5.5
Replies: 6
Views: 2547

CPU 100% userman 5.5

Guys need help urgent upgraded from 4.17 to 5.5 "stable". Userman worked fine for one day and now my cpu is running 100% all the time. none of my clients can logg in and im getting some very unhappy customers.Is this really a stable version? I will email support rif to admins.
by happydaddy
Thu Jul 07, 2011 7:54 am
Forum: The User Manager
Topic: User manager database won't save
Replies: 7
Views: 4557

Re: User manager database won't save

Any solution to this i am having the same problem? I have ample resources.
by happydaddy
Wed Jun 22, 2011 10:52 pm
Forum: Forwarding Protocols
Topic: ospf and load balance 2 dsl's in different locations
Replies: 2
Views: 1582

ospf and load balance 2 dsl's in different locations

Hi I run a wireless ospf network and i have one 4Meg dsl's + radius server in one location and a 1 Meg Dsl in a different location on my network. Currently i use ospf to distribute my default routes as type 1. This works fine but i want it to be able to do load balancing on the entire wireless netwo...
by happydaddy
Mon Mar 21, 2011 10:45 am
Forum: The User Manager
Topic: I need an alert on my Hotspot
Replies: 18
Views: 11227

Re: I need an alert on my Hotspot

Sorry guys had a look at the hotspot i created for a customer and It only displays the notifier all the time and not as requested when it reach last 5 minutes. http://s3.postimage.org/18d755bic/hotspot_time.jpg followed this example to setup http://wiki.mikrotik.com/wiki/User_Manager/Hotspot_Example...
by happydaddy
Tue Mar 15, 2011 10:15 pm
Forum: The User Manager
Topic: I need an alert on my Hotspot
Replies: 18
Views: 11227

Re: I need an alert on my Hotspot

I just used the normal hotspot + usermanager setup in mikrotik. They cannot add time them self they have to go to the cashier to add credits.
by happydaddy
Mon Mar 14, 2011 8:02 pm
Forum: The User Manager
Topic: 2 radius server
Replies: 2
Views: 4978

Re: 2 radius server

Found this thread perhaps it could help

http://forum.mikrotik.com/viewtopic.php?f=2&t=40648
by happydaddy
Mon Mar 14, 2011 7:40 pm
Forum: The User Manager
Topic: I need an alert on my Hotspot
Replies: 18
Views: 11227

Re: I need an alert on my Hotspot

My Hotspot shows the time remaining as a pop up. Just enable pop ups in Firefox.
by happydaddy
Mon Mar 14, 2011 7:37 pm
Forum: The User Manager
Topic: why this
Replies: 1
Views: 1188

Re: why this

Check out if this could help. Change the port.

http://forum.mikrotik.com/viewtopic.php?f=7&t=14655
by happydaddy
Sat Mar 12, 2011 12:29 am
Forum: The User Manager
Topic: monthly customers + hotspot + paypal/authorized.net
Replies: 2
Views: 1694

Re: monthly customers + hotspot + paypal/authorized.net

Is my question unclear?please let me know if i should simplify.
by happydaddy
Sat Mar 12, 2011 12:25 am
Forum: The User Manager
Topic: RADIUS server is not responding
Replies: 4
Views: 2542

Re: RADIUS server is not responding

Make sure you have ticked off radius in the ip-hotspot- server profile-hsprof1 and radius tab
by happydaddy
Thu Mar 10, 2011 1:17 pm
Forum: The User Manager
Topic: monthly customers + hotspot + paypal/authorized.net
Replies: 2
Views: 1694

monthly customers + hotspot + paypal/authorized.net

Hi I am a wisp which uses hotspot servers at the edge of my networks for clients to log in. Will paypal and authorize.net work for month to month customers? Customers has a fixed username and password. They pay a monthly connection fee. They also pay per gig. Can i setup usermanager to accept paymen...
by happydaddy
Mon Feb 28, 2011 9:11 pm
Forum: Forwarding Protocols
Topic: ospf + nbma help
Replies: 6
Views: 3197

Re: ospf + nbma help

All my routers in this example are setup as priority 1. Its only if i had 1 AP with lets say 2 clients that i would use the AP as priority 2 and the stations as priority 1. i think in that case the higher the priority becomes the designated router and the other 2 becomes dr other. Not sure if this i...
by happydaddy
Fri Feb 25, 2011 4:14 pm
Forum: Forwarding Protocols
Topic: ospf + nbma help
Replies: 6
Views: 3197

Re: ospf + nbma help

Just for feed back i made all my routers priority 1 only the ones which needed to become designated routers i made 2. eg if i needed to branch off from my main area. ospf working well in this manner redundancy works well. Only one problem still, as soon as i maximize the throughput from one router t...
by happydaddy
Wed Feb 23, 2011 5:08 pm
Forum: Forwarding Protocols
Topic: ospf + nbma help
Replies: 6
Views: 3197

Re: ospf + nbma help

Thanks

Do i do it for all the interfaces on all the routers or only on MKT1 and MKT4 ?
by happydaddy
Wed Feb 23, 2011 6:56 am
Forum: Forwarding Protocols
Topic: ospf + nbma help
Replies: 6
Views: 3197

ospf + nbma help

Hi below is a portion of my network layout. I implemented ospf and had some problems with packet loss. all routers are linked together via ubiquity and rb750's. Found out it is recommended to use NBMA from wiki for wireless. My question is do i make ether 1 priority 0 and ether2 priority 1 on every ...
by happydaddy
Fri Feb 18, 2011 8:13 am
Forum: Forwarding Protocols
Topic: ospf pppoe clients
Replies: 2
Views: 1386

Re: ospf pppoe clients

Thanks..
by happydaddy
Wed Feb 09, 2011 3:04 pm
Forum: Forwarding Protocols
Topic: ospf pppoe clients
Replies: 2
Views: 1386

ospf pppoe clients

Hi guys below is a diagram of what my network looks like. http://img708.imageshack.us/img708/5021/ospf.png The areas other than 0 are all pppoe servers which gets authentication from radius server MTK1. OSPF setup works well. Now my question is when i torch the lan interface of the radius server i c...
by happydaddy
Sun Jan 30, 2011 6:43 am
Forum: Forwarding Protocols
Topic: help with ospf simple example
Replies: 2
Views: 1518

Re: help with ospf simple example

Thanks fewi Was up till late with this one and must have had a blond moment when i was busy with this lab setup. I changed it to .1/24 for each router and .2/24 for the corresponding PC, however still no luck. Eventually got the lab setup to work, turned out my laptop on the one side needed a reboot...
by happydaddy
Sun Jan 30, 2011 1:18 am
Forum: Forwarding Protocols
Topic: help with ospf simple example
Replies: 2
Views: 1518

help with ospf simple example

Hi I am following this tutorial http://wiki.mikrotik.com/wiki/Manual:OSPF-examples and seem to be stuck. I got all my routers to communicate and am able to ping all interfaces. http://wiki.mikrotik.com/images/1/12/Image6005.gif Form router 3 i can ping 210.13.1.0 and from router router 1 i can ping ...
by happydaddy
Thu Dec 09, 2010 11:02 am
Forum: The User Manager
Topic: Monitor clients through radius server
Replies: 0
Views: 971

Monitor clients through radius server

Hi Is there a way to monitor clients on your radius server (usermanager)? I have many routers on my wireless network giving pppoe services and hotspot services. All authenticate users from one Usermanager server. Is there a way to monitor which client is authenticated real time to the radius server ...
by happydaddy
Wed Dec 08, 2010 7:37 am
Forum: Forwarding Protocols
Topic: OSPF on bridged network and redundency
Replies: 3
Views: 1791

Re: OSPF on bridged network and redundency

In bridged rstp will the trafic flow both directions from R1 or will this only flow one direction and if one side fails it will choose a different path? i really would like to run ospf but need to leave parts of the network untouched(bridged) and expand the network from R1 side. How should i configu...
by happydaddy
Wed Dec 08, 2010 12:40 am
Forum: Forwarding Protocols
Topic: OSPF on bridged network and redundency
Replies: 3
Views: 1791

OSPF on bridged network and redundency

http://img219.imageshack.us/img219/4300/ospf.gif Hi guys I am trying to create a ospf to help with redundency and full duplex link. I need to have R1 link to R4 via wireless and R1 to R2 via ethernet. What is the best way to proceed with this task. i have added ospf on all routers with ip range of ...
by happydaddy
Thu Oct 21, 2010 9:20 am
Forum: Scripting
Topic: Adding username to email
Replies: 2
Views: 892

Re: Adding username to email

Thanks :D
by happydaddy
Thu Oct 21, 2010 12:31 am
Forum: Scripting
Topic: Adding username to email
Replies: 2
Views: 892

Adding username to email

Hi i would like to compile a email with a script which will automatically add the persons user name in usermanager but seem to have trouble with it. The script runs but the email ends up with a blank usernam. please check below. /tool user-manager user :foreach i in=[/tool user-manager user find sub...
by happydaddy
Thu Sep 16, 2010 10:17 pm
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

Re: usage warning script

Hmm my memory keeps filling up and i have to reboot system to free it again. Anything to do with the script?
by happydaddy
Tue Sep 14, 2010 7:12 pm
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

Re: usage warning script

Ok find below my script please check to see if all ok. Also how does it handle people who has uncapped example 0 transfer limit? :local name :local surname :local usage :local bytesin :local bytesout :local bytestotal :local megstotal :local cap :local comment :local newcomment :local invoice :local...
by happydaddy
Tue Sep 14, 2010 4:37 pm
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

Re: usage warning script

Sweet....will try it later and post results. Thanks for the help.
by happydaddy
Mon Sep 13, 2010 7:10 pm
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

Re: usage warning script

Yes and no..... After breaking up the script in peices and runing it in parts i found a few problems 1st one Which admin helped with. :foreach i in=[/tool user-manager user find subscriber=admin] with this one Code: :foreach i in=[/tool user-manager user find subscriber="admin"] 2nd one i ...
by happydaddy
Sun Sep 12, 2010 3:59 am
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

Re: usage warning script

Ok... i think its working now. Just need to let it run and see. Below is my script. :local date :local cap :local clientname :local name :local surname :local usage :local bytesin :local bytesout :local bytestotal :local megstotal :local comment :local newcomment :local invoice :local newinvoice :lo...
by happydaddy
Sat Sep 11, 2010 9:11 pm
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

Re: usage warning script

oops thanks fewi....still learning. Is there a way to test the script and get a result in the log.
by happydaddy
Sat Sep 11, 2010 8:04 pm
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

Re: usage warning script

i seem to be getting errors when i run the script in terminal MikroTik RouterOS 3.30 (c) 1999-2009 http://www.mikrotik.com/ [ashraf@happydaddy] > :local name [ashraf@happydaddy] > :local surname [ashraf@happydaddy] > :local usage [ashraf@happydaddy] > :local bytesin [ashraf@happydaddy] > :local byte...
by happydaddy
Fri Sep 10, 2010 1:36 pm
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

Re: usage warning script

Still no result in the log. created a test account of 50 megs and ran script manually on 50% 75% and 100% with no results being emailed to agent1. I thought it might be smtp server and tried something small like script below and all worked hundred percent. i noticed however there is the "\"...
by happydaddy
Fri Sep 10, 2010 7:57 am
Forum: Scripting
Topic: usage warning script
Replies: 15
Views: 5062

usage warning script

Hi i am trying tho get the usage warning script to work but with no luck. Please look at the script and let me know if im doing something wrong. I only need the usage warning script and not the other automated billing scripts. I cant see anything happening in the logs when i manually run the script....
by happydaddy
Thu Sep 02, 2010 1:20 am
Forum: Scripting
Topic: resolve a ip in usermanager
Replies: 2
Views: 1061

Re: resolve a ip in usermanager

Wow as easy as that. Works great. :D

Thanks
by happydaddy
Thu Sep 02, 2010 12:58 am
Forum: Scripting
Topic: resolve a ip in usermanager
Replies: 2
Views: 1061

resolve a ip in usermanager

Hi Is there a script that can change the ip address of a Router added in a Usermanager server. The routers ip changes everyday and use dns script to update it daily. Problem is i need the usermanager server to know the ip change as-well for radius authentications. I tried to add these 2 scripts and ...
by happydaddy
Thu Jul 29, 2010 8:32 pm
Forum: SwOS
Topic: I’m too stupid for SwOS
Replies: 8
Views: 6844

Re: I’m too stupid for SwOS

Still teething problems, I cant upgrade to 1.1 via web interface or change ip for that matter. is there a alternate way to upgrade?
by happydaddy
Sat Jul 24, 2010 12:00 pm
Forum: Forwarding Protocols
Topic: routing with 4routers and 2 hosts
Replies: 5
Views: 2063

Re: routing with 4routers and 2 hosts

Thanks for the reply. Currently the network is all bridged. Like most i started out with bridge and now need to move to a segmented network due to growth. Problem is there are so many options. I thought by starting with simple routing i might gradually move into the bigger things like ospf, mpls and...
by happydaddy
Fri Jul 23, 2010 11:06 pm
Forum: Forwarding Protocols
Topic: routing with 4routers and 2 hosts
Replies: 5
Views: 2063

Re: routing with 4routers and 2 hosts

anyone?
by happydaddy
Thu Jul 22, 2010 2:04 pm
Forum: Forwarding Protocols
Topic: routing with 4routers and 2 hosts
Replies: 5
Views: 2063

Re: routing with 4routers and 2 hosts

Image[/URL]

Uploaded with ImageShack.us

So in my case on top i would add a route in
router2
/ip route add dst-address=192.168.3.0/24 gateway=192.168.21.2

Router1
/ip route add dst-address=192.168.4.0/24 gateway=192.168.21.1

Thanks
by happydaddy
Thu Jul 22, 2010 1:29 pm
Forum: Forwarding Protocols
Topic: routing with 4routers and 2 hosts
Replies: 5
Views: 2063

routing with 4routers and 2 hosts

Hi i am following this example: http://wiki.mikrotik.com/wiki/Simple_Static_Routes_Example http://wiki.mikrotik.com/images/3/3d/Simple_Static_Routes_Example.gif Instead of 2 routers before the host i have 4 routers. Host1------router1------router2-----router3------router4------Host2 Can someone help...
by happydaddy
Fri Jul 16, 2010 3:11 pm
Forum: The User Manager
Topic: help setup hotspot and usermanager on seperate routers
Replies: 4
Views: 2229

Re: help setup hotspot and usermanager on seperate routers

[admin@R2] > /radius 
[admin@R2] /radius> print
Flags: X - disabled 
 #   SERVICE          CALLED-ID       DOMAIN       ADDRESS         SECRET      
 0   hotspot                                       192.168.1.200   123456      
[admin@R2] /radius> 
by happydaddy
Sat Jul 10, 2010 8:38 pm
Forum: The User Manager
Topic: help setup hotspot and usermanager on seperate routers
Replies: 4
Views: 2229

Re: help setup hotspot and usermanager on seperate routers

Thanks Sergejs I am following this wiki but seem to have run into some problems. http://wiki.mikrotik.com/wiki/Centralized_Authentication_for_Hotspot_user The Hotspot works fine but when i try to log in it gives me username and password error. Looking at the log it appears that its trying to authent...
by happydaddy
Tue Jul 06, 2010 3:18 pm
Forum: The User Manager
Topic: help setup hotspot and usermanager on seperate routers
Replies: 4
Views: 2229

help setup hotspot and usermanager on seperate routers

I want to change my Authentication method from pppoe server to a hotspot server with authentications coming from my separate usermanager PC. Currently i have a large bridged network and i want remove the bridge from my High sites which serves clients and implement the hotspot on the AP. Below is an ...
by happydaddy
Tue Jul 06, 2010 2:49 pm
Forum: The User Manager
Topic: Um/Hotspot local LAN shares 'unstable'
Replies: 14
Views: 7667

Re: Um/Hotspot local LAN shares 'unstable'

I had the same problems when i used hotspots on my bridged network, when i stream movies from my server it would just stop after a while. I run a ping to the server and it runs fine all on different ip range to the hotspot. My solution was to run a pppoe server instead.
by happydaddy
Wed Jun 30, 2010 9:17 am
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 268
Views: 94858

Re: User Manager v4.0 test package

When is the test UM going to going to be a stable release with all that new features? I want to upgrade my existing 3.30 UM to the test but to scared it might cause issues with my clients?
by happydaddy
Wed Jun 02, 2010 7:34 pm
Forum: Forwarding Protocols
Topic: Blocking unwanted pppoe connections
Replies: 6
Views: 4595

Re: Blocking unwanted pppoe connections

What about mac filter rule?
by happydaddy
Tue Jun 01, 2010 9:57 pm
Forum: Forwarding Protocols
Topic: Blocking unwanted pppoe connections
Replies: 6
Views: 4595

Blocking unwanted pppoe connections

Hi Is there a way to block people from using there private pppoe servers on my network? I have a pppoe server running with userman but i have occasional useres who has there own pppoe adsl modems and there usernames keep trying to log onto my server....How do i block these guys from reaching my serv...
by happydaddy
Fri May 07, 2010 4:46 pm
Forum: The User Manager
Topic: walled garden question
Replies: 3
Views: 1741

Re: walled garden question

gave up on this one....will attempt it again at a later stage and post results. Thanks for suggestion.
by happydaddy
Fri May 07, 2010 4:29 pm
Forum: The User Manager
Topic: terminating...-peer is not responding
Replies: 3
Views: 6908

Re: terminating...-peer is not responding

Found a solution to my problem. I wonder if this forum is still alive.

A few people on the network was running there CPE's in Psuedobridge and not station wds, this caused the pppoe server to go nuts.
by happydaddy
Fri May 07, 2010 4:22 pm
Forum: Beginner Basics
Topic: [HELP] PPPoE terminating... - peer is not responding
Replies: 4
Views: 9468

Re: [HELP] PPPoE terminating... - peer is not responding

Found why mine was giving problems.... had a few people connected to my High-sights in psuedobridge instead of staion wds. Psuedobridge on a network causes major crap.
by happydaddy
Tue May 04, 2010 10:25 pm
Forum: Wireless Networking
Topic: basic internet sharing accros wireless link
Replies: 1
Views: 924

basic internet sharing accros wireless link

Hi Ive tried all wiki tutorials and still no connection to internet.Please help. Below i have layout. DSL____lan_wireless--------wireless_lan____pc [-Mikritik1-] [-Mikrotik2-] On Mikrotik1 i am using a pppoe client to connect to DSL.it has "add default route" and "peer dns" ticke...
by happydaddy
Mon May 03, 2010 11:30 pm
Forum: Beginner Basics
Topic: [HELP] PPPoE terminating... - peer is not responding
Replies: 4
Views: 9468

Re: [HELP] PPPoE terminating... - peer is not responding

Hmm i have the same error for some of my clients, i even ran a ping to one of them with no timeouts but still terminating.... -peer is not responding. I have noticed however if i keep running a ping to google it stays connected. As if the internet connection needs to be in use.
by happydaddy
Mon May 03, 2010 11:22 pm
Forum: The User Manager
Topic: terminating...-peer is not responding
Replies: 3
Views: 6908

terminating...-peer is not responding

Hi Anyone know what could be causing this on mikrotik usermanager with pppoe server. I have random customers dropping off the mikrotik pppoe server giving error message peer is not responding. I even ran a ping to the clients ip and no timeouts but i still get the error, terminating... -peer is not ...
by happydaddy
Wed Mar 31, 2010 8:41 am
Forum: The User Manager
Topic: walled garden question
Replies: 3
Views: 1741

Re: walled garden question

Any one able to help?
by happydaddy
Tue Mar 30, 2010 12:16 pm
Forum: The User Manager
Topic: Multiple PPPoE connections, one MAC address
Replies: 4
Views: 4564

Re: Multiple PPPoE connections, one MAC address

cpe can only connect to one router at a time That is if both routers are in AP mode. you can wds the two AP routers so that the two routers can speak to each other and the cpe. Make sure everything is bridged between wireless and ether. Check out this link for example of how to program the two route...
by happydaddy
Tue Mar 30, 2010 11:56 am
Forum: The User Manager
Topic: users cant login into http://x.x.x.x/user after upgrade
Replies: 3
Views: 1886

Re: users cant login into http://x.x.x.x/user after upgrade

Had this problem when i upgrade but forgot to add userman package. In winbox check system....packages to see if userman is there.
by happydaddy
Tue Mar 30, 2010 11:50 am
Forum: The User Manager
Topic: walled garden question
Replies: 3
Views: 1741

walled garden question

Hi

How do i add this into my walled garden.

http://example.changeip.net:808/user

I have tried a few combinations but still nothing ^/example./changeip./net$ path "user" and port 808

Any help please

Thanks
by happydaddy
Mon Mar 08, 2010 9:18 am
Forum: General
Topic: Load balance with pppoe server
Replies: 0
Views: 982

Load balance with pppoe server

Hi i am trying to achieve a load balance with this walk through but with pppoe server on mikrotik. http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways On mikrotik Box i have is 2 profiles, 2 usergroups and 2 pppoe servers (Mikrotik) and 2 different ip pools. Usergroup1 needs to go th...
by happydaddy
Tue Jan 26, 2010 11:12 pm
Forum: General
Topic: Allowing services based on Mac address
Replies: 3
Views: 713

Re: Allowing services based on Mac address

Thanks Chupaka

"/ip firewall filter add disabled=no chain=input protocol=tcp dst-port=21 action=drop"

Unfortunately this does not seem to block ftp. however when i change it to forward only then it drops all ftp connections.
by happydaddy
Tue Jan 26, 2010 12:57 pm
Forum: General
Topic: Allowing services based on Mac address
Replies: 3
Views: 713

Allowing services based on Mac address

Hi

Is there a way to allow services like FTP based on the persons mac address and not IP in mikrotik router v4.2?

Thanks
by happydaddy
Sun Jan 03, 2010 5:25 pm
Forum: The User Manager
Topic: Transfer limit for user login
Replies: 0
Views: 1184

Transfer limit for user login

Hi I sell internet based on usage (500megs,1gig,2gig, etc) with userman and pppoe. when the user logs in via pppoe he is able to check his total uploaded and total downloaded. Sometimes users purchace more usage and i just add it on to there usage limit e.g he had 1 gig and wants another 500 megs.Tr...
by happydaddy
Tue Jul 21, 2009 8:15 pm
Forum: Scripting
Topic: script to switch between pppoe connections
Replies: 2
Views: 1123

Re: script to switch between pppoe connections

lol that simple. Works like a bomb i just added a schedule. I love mikrotik. :D

Thanks
Chupaka
by happydaddy
Mon Jul 20, 2009 7:47 pm
Forum: Scripting
Topic: script to switch between pppoe connections
Replies: 2
Views: 1123

script to switch between pppoe connections

Hi I have two internet service providers who gives me different speeds depending on the package i buy. Package 1 = 384 Kbits from 8:00 to 20:00 and full 4 Megs After 20:00 (unlimited gigs) Package 2 = 4megs all the time (pay per gig) Package 1 is relatively cheaper than package 2 (per gig) hence the...
by happydaddy
Mon Jul 20, 2009 7:21 pm
Forum: Beginner Basics
Topic: changeip portforward and teamspeak
Replies: 2
Views: 2548

Re: changeip portforward and teamspeak

Thanks Thiele After a long struggle got it to work and thought id add what i done. I added info as you said to the modem and still could not get it to work. I found out that i had to forward teamspeak port as well in the mikrotik router. I added a dst-nat with destination port udp 8676 and actioned ...
by happydaddy
Mon Jul 20, 2009 6:48 pm
Forum: General
Topic: RB333 and pcrouter with ROS v 4
Replies: 10
Views: 2537

Re: RB333 and pcrouter with ROS v 4

Hmm I might get in trouble for answering you but i can understand frustration. Kezi Check you cable or antennae. More than likely your cable got water in it, just after this weekend i found one of my lmr 400 cable got water even though i sealed the ntype connector.Gave the same problem you describin...
by happydaddy
Sun Jul 19, 2009 7:32 pm
Forum: General
Topic: RB333 and pcrouter with ROS v 4
Replies: 10
Views: 2537

Re: RB333 and pcrouter with ROS v 4

Thanks

Pc router is upgradeable but not 333. I take it i need a new license?
by happydaddy
Sat Jul 18, 2009 11:12 am
Forum: General
Topic: RB333 and pcrouter with ROS v 4
Replies: 10
Views: 2537

Re: RB333 and pcrouter with ROS v 4

How do i check if the license support it and if not do i buy a new license?
by happydaddy
Tue Jul 14, 2009 9:19 pm
Forum: General
Topic: RB333 and pcrouter with ROS v 4
Replies: 10
Views: 2537

RB333 and pcrouter with ROS v 4

Hi

I am planing to setup up a 802 11 n links and need some advice. Does the beta ROS 4 work on a RB333 and pc router? Also can the r52n AP side handle more than one 802 11n client and what will the speeds be like. I am thinking of linking two RB333 to one pc router.

Thanks
by happydaddy
Tue Jun 30, 2009 4:02 pm
Forum: Beginner Basics
Topic: changeip portforward and teamspeak
Replies: 2
Views: 2548

changeip portforward and teamspeak

Hi I created a dns at changeip and want a freind from the internet side to be able to talk to me. I think i need to do some portforwarding from my lan1 of the mikrotik box to get it to work. please look below at my layout and advise further. teamspeak server PC------mikrotik Lan1___mikrotik lan2----...
by happydaddy
Sat May 30, 2009 1:11 pm
Forum: General
Topic: Bonding 2 adsl for voip
Replies: 1
Views: 850

Bonding 2 adsl for voip

Hi I found this link http://www.mikrotik.com/testdocs/ros/3.0/interface/bonding_content.php#.2 and wanted to know if this is an ideal example if i wanted to bond my 2 adsl lines to get a bigger upload and to allow for more simultaneous calls to be made via voip. Each adsl can handle 4megs download b...
by happydaddy
Fri May 15, 2009 6:44 pm
Forum: Beginner Basics
Topic: Nat help with mikrotik router
Replies: 5
Views: 1196

Re: Nat help with mikrotik router

Ether1 links to the modem.My internet ip 196.209.165.92 but this changes daily
by happydaddy
Thu May 14, 2009 9:10 am
Forum: Beginner Basics
Topic: Nat help with mikrotik router
Replies: 5
Views: 1196

Re: Nat help with mikrotik router

ether1 is 192.168.10.1 and ether 2 is has no ip. I am using pppoe server on ether2 with ip pool 192.168.1.x. The voip servers ip is 192.168.1.10. Let me know if this helps you understand more
by happydaddy
Tue May 12, 2009 9:59 pm
Forum: General
Topic: how to structure network routing
Replies: 4
Views: 1212

Re: how to structure network routing

Bridging such a large network is not wise. It is better to turn each point into router, with separate subnet for each interface. Set routing among points so traffic flows around and that is it.
any wiki tutorials for this example?
by happydaddy
Tue May 12, 2009 9:56 pm
Forum: Beginner Basics
Topic: Nat help with mikrotik router
Replies: 5
Views: 1196

Nat help with mikrotik router

Hi I need help with trying to get into my voip server from and external internet connection. problem is i think my mikrotik box is blocking me from accessing it.Please look at layout below for a better idea remote pc_____INTERNET______Modem---(ether1)Mikrotik router(ether2)-----voip server If i remo...
by happydaddy
Sun May 03, 2009 2:01 pm
Forum: General
Topic: how to structure network routing
Replies: 4
Views: 1212

how to structure network routing

Hi I need some advise on how to do the routing on my network. We are a very big wireless user group and run all our access points and client routers in bridge mode and use the 192.168.1.xx ip's. problem is we running out of ip's. I need to know what is the most effective way to manage this problem a...
by happydaddy
Fri Apr 24, 2009 1:34 am
Forum: Beginner Basics
Topic: only pppoe users allowed
Replies: 10
Views: 5912

Re: only pppoe users allowed

Thanks works Great. Keep up the good work. :D
by happydaddy
Wed Apr 22, 2009 3:58 pm
Forum: Beginner Basics
Topic: only pppoe users allowed
Replies: 10
Views: 5912

Re: only pppoe users allowed

What you want can be easily done by removing the IP Address from the PPPOE interface. My network is setup that way and it works. 1. Remove the IP address from the PPPoE Interface 2. Disable DHCP Server for the PPPoE Interface 3. make sure PPP is set to use radius /ppp aaa set use-radius=yes 1.i dis...
by happydaddy
Wed Apr 22, 2009 2:15 pm
Forum: General
Topic: hotspot page without the hotspot
Replies: 4
Views: 927

Re: hotspot page without the hotspot

I have open network and i need unknown persons plugging into the network to be redirected to my home page. Hotspot would have probably taken care of everything but Ive already implemented all existing users on pppoe and will be an effort to switch them over.
by happydaddy
Wed Apr 22, 2009 1:52 pm
Forum: General
Topic: hotspot page without the hotspot
Replies: 4
Views: 927

Re: hotspot page without the hotspot

Hmm

Will there be any problems with running pppoe and hotspot on the same router?

Thanks
by happydaddy
Wed Apr 22, 2009 1:34 pm
Forum: Beginner Basics
Topic: only pppoe users allowed
Replies: 10
Views: 5912

Re: only pppoe users allowed

only allow pppoe-encapsulated traffic on the bridge on your pppoe-server, simple as that :-) add action=accept chain=forward comment="" disabled=no in-bridge=bridge_pppoe mac-protocol=0x8863 out-bridge=bridge_pppoe add action=accept chain=forward comment="" disabled=no in-bridge...
by happydaddy
Wed Apr 22, 2009 1:07 pm
Forum: General
Topic: hotspot page without the hotspot
Replies: 4
Views: 927

hotspot page without the hotspot

Hi

I want to create a home page for people who logs on to my network. I want it to work with a dhcp server. Is this possible?Any walk through for this?

Thanks
by happydaddy
Wed Apr 22, 2009 12:25 pm
Forum: Beginner Basics
Topic: only pppoe users allowed
Replies: 10
Views: 5912

Re: only pppoe users allowed

Hi Remove the IP Address on the PPPOE interface. if i try this i cant use pppoe it gives me username and password invalid. create a different ip pool and assign to pppoe clients. and only use NAT for pppoe pool. Ive created a different ip pool and nated it, so now i have and ip pool for 192.168.0.1-...
by happydaddy
Wed Apr 22, 2009 2:07 am
Forum: Beginner Basics
Topic: only pppoe users allowed
Replies: 10
Views: 5912

only pppoe users allowed

Hi I have a pppoe server running and works great with usermanager.mikrotik server is 192.168.0.254. User uses pppoe to dail up, gets and ip and gateway, lets say 192.168.0.1 and gateway 192.168.0.254. Problem is if i use manually ip address like lets say 192.168.0.2 and gateway 192.168.0.254 i am ab...
by happydaddy
Thu Apr 09, 2009 6:45 pm
Forum: Beginner Basics
Topic: pppoe server on ethe2 and hotspot on vlan
Replies: 2
Views: 909

Re: pppoe server on ethe2 and hotspot on vlan

please let me know if the question is clear enough?
by happydaddy
Wed Apr 08, 2009 3:17 pm
Forum: Beginner Basics
Topic: pppoe server on ethe2 and hotspot on vlan
Replies: 2
Views: 909

pppoe server on ethe2 and hotspot on vlan

Hi I have a mikrotik pppoe server running on my ether2 with my adsl link to ether1(http://wiki.mikrotik.com/wiki/User_Manager/PPP_Example). i want to create a hotspot on a vlan for unknown people who connects ether2. Is this possible and is there a how to guide for this.I created the vlan and then h...
by happydaddy
Sun Feb 15, 2009 11:37 am
Forum: Beginner Basics
Topic: simple internet sharing between freinds
Replies: 6
Views: 2763

Re: simple internet sharing between freinds

Hi

OK i got it. When you mentioned Nat i looked into that and found the answers. i added a src nat with with masquerade. That was it.

Thanks a lot man.
:D :D :D
by happydaddy
Sat Feb 14, 2009 6:18 pm
Forum: Beginner Basics
Topic: simple internet sharing between freinds
Replies: 6
Views: 2763

Re: simple internet sharing between freinds

Hi i havent completely moved away from bridge on Highsite because there is still some clients using station wds and bridge on all the interfaces. i have only done my one. which is the station. /ip address print STATION [admin@MAJ] > /ip address print Flags: X - disabled, I - invalid, D - dynamic # A...
by happydaddy
Sat Feb 14, 2009 12:17 pm
Forum: Beginner Basics
Topic: simple internet sharing between freinds
Replies: 6
Views: 2763

Re: simple internet sharing between freinds

ok i added a route to the adsl router(172.18.200.69) network 172.16.0.0 subnet 255.240.0.0 gateway 172.18.200.70 and i can know ping it from pc 172.18.200.9 . Now i added the adsl router ip to the pc's gateway but no internet. PC IP 172.18.200.9 subnet 255.255.255.248 gatway 172.18.200.69(adsl route...
by happydaddy
Sat Feb 14, 2009 12:11 am
Forum: Beginner Basics
Topic: simple internet sharing between freinds
Replies: 6
Views: 2763

Re: simple internet sharing between freinds

Hi Thanks for reply sorry for being noob. I made a few changes to the router and now i am using normal routing instead of the bridge wds modes. find below the ip print. Station router connecting to an access point. The modems ip is 172.18.200.69 connected to the ether 1 Flags: X - disabled, I - inva...
by happydaddy
Fri Feb 13, 2009 2:06 am
Forum: Beginner Basics
Topic: simple internet sharing between freinds
Replies: 6
Views: 2763

simple internet sharing between freinds

Hi I created a pppoe client on my AP router and i can ping the internet with the router. Now what i want to do is give my freind internet access by using the router as a gateway.My friend connects wireless with a cpe to my AP. i tried adding the gateway of my AP to his pc but no luck. My Ap is 192.1...
by happydaddy
Thu Jan 29, 2009 1:10 pm
Forum: The User Manager
Topic: pppoe server+usermanager and local and international trafic
Replies: 0
Views: 1107

pppoe server+usermanager and local and international trafic

Hi i have a pppoe server running with usermanager.Also i have a pppoe client on the mikrotik router dialed up to international +local traffic. What i want to do is dial up another account which has local traffic only and have clients pppoe into this account when they only surfing local web pages. Is...
by happydaddy
Fri Jan 09, 2009 5:47 pm
Forum: General
Topic: pppoe Question
Replies: 1
Views: 672

Re: pppoe Question

Hi

Found a solution. Buddies used bridge on there routers so i mac filtered there bridge blocking my pppoe server.

Thanks
by happydaddy
Thu Jan 08, 2009 9:45 pm
Forum: General
Topic: pppoe Question
Replies: 1
Views: 672

pppoe Question

Hi i got a pppoe server on my mikrotik router where i share my internet connection using this walk through http://wiki.mikrotik.com/wiki/How_to_Connect_your_Home_Network_to_xDSL_Line and the pppoe wiki. Everything works fine i dial up get a connection and im on the internet. The problem however is t...
by happydaddy
Wed Apr 02, 2008 8:59 am
Forum: Beginner Basics
Topic: only pick up udp protocals in connection tracking
Replies: 0
Views: 1011

only pick up udp protocals in connection tracking

Hi I upgraded my router to v3.4 and now i cant see any tcp connections in my firewall connection tracking. also i am trying to balance bandwidth but cant seem to get it right with the example given http://wiki.mikrotik.com/wiki/PCQ_Examples my setup is as follows and all in wds (still waiting on hel...
by happydaddy
Fri Mar 28, 2008 9:33 am
Forum: Beginner Basics
Topic: pc router kicks all clients off and does not reconect
Replies: 6
Views: 1703

Re: pc router kicks all clients off and does not reconect

hi this is the result after i eter comand: [admin@MINARAT] > / interface wireless export # jan/01/2002 19:11:37 by RouterOS 2.9.50 # software id = C2CW-LJT # / interface wireless set wlan1 name="wlan1" mtu=1500 mac-address=00:0C:42:18:10:64 arp=enabled \ disable-running-check=no radio-name...
by happydaddy
Thu Mar 27, 2008 11:31 pm
Forum: Beginner Basics
Topic: pc router kicks all clients off and does not reconect
Replies: 6
Views: 1703

Re: pc router kicks all clients off and does not reconect

i have 5 people connected to ap-bridge and all clients are in station-wds mode. i added a bridge to AP and added under wds (wds mode:static and wds default bridge:bridge1) I did the same for the clients linking into AP only difference they link in as station-wds with same wds modes i am one of the c...
by happydaddy
Thu Mar 27, 2008 10:44 pm
Forum: Beginner Basics
Topic: pc router kicks all clients off and does not reconect
Replies: 6
Views: 1703

Re: pc router kicks all clients off and does not reconect

i made it wds because it was the easiest way with having all ip addresses the same and not need to do routing as i am still quite noob. So if i understand you properly i place the client in station mode no wds. will this work with my set up? i have the highsite on a AP-bridge mode with the wds secti...
by happydaddy
Wed Mar 26, 2008 11:09 pm
Forum: Beginner Basics
Topic: pc router kicks all clients off and does not reconect
Replies: 6
Views: 1703

pc router kicks all clients off and does not reconect

Hi Just need to know if anyone can help? i have a pc router with v3.4 firmware and after more or less every week i need to physicaly power down the pc router and restart it. Somhow it seems to kick off all clients linked and does not reconect them. when i do a scan from client side i see the ssid, s...
by happydaddy
Fri Jan 18, 2008 8:25 pm
Forum: General
Topic: 3 adsl modems and pppoe dial up
Replies: 3
Views: 1296

Re: 3 adsl modems and pppoe dial up

Thanks

Will check it out and post results
by happydaddy
Wed Jan 16, 2008 6:08 pm
Forum: General
Topic: 3 adsl modems and pppoe dial up
Replies: 3
Views: 1296

Re: 3 adsl modems and pppoe dial up

Has this been done already?Can someone refer me to the nearest link?Or am i giving to little info?Please help

Thanks
by happydaddy
Mon Jan 14, 2008 11:33 pm
Forum: General
Topic: 3 adsl modems and pppoe dial up
Replies: 3
Views: 1296

3 adsl modems and pppoe dial up

Hi Just to give a breif discription of our network. We a wireless group that has 3 adsl modems on our wireless network. We all use same ip range and subnet mask. Modem1 :192.168.1.100 cable linked to switch which links up pc(192.168.1.101) and mikrotik wireless router (192.168.1.102) Modem 2 :192.16...
by happydaddy
Wed Dec 26, 2007 2:58 am
Forum: General
Topic: port prioritising for gamers
Replies: 1
Views: 1227

Re: port prioritising for gamers

Here is what i done so far which appears to work. I added some marks and then used some queue trees. MARK: 0 chain=prerouting action=mark-connection new-connection-mark=dota passthrough=yes dst-port=6112-6118 protocol=tcp 1 chain=prerouting action=mark-packet new-packet-mark=dota passthrough=no conn...
by happydaddy
Wed Dec 26, 2007 2:47 am
Forum: General
Topic: Ip firewall connections
Replies: 1
Views: 1417

Ip firewall connections

Hi

I find it strange that my new RB333 does not show me any tcp ports being used on my router even though i know there is ftp ports being used. All the router see is udp ports. Any idea on how to get all the ports passing through router to be displayed?

Thanks
by happydaddy
Wed Dec 12, 2007 12:03 pm
Forum: General
Topic: port prioritising for gamers
Replies: 1
Views: 1227

port prioritising for gamers

Hi Alot of the guys on my network plays dota and uses ports 6112-6118. the problem i have is the ftp downloads sometimes uses all the bandwidth. is there a way to slow down the bandwith for ftp useres while there is gaming going on and resume the ftp downloads to full speed when the gaming is done? ...
by happydaddy
Fri Dec 07, 2007 3:25 pm
Forum: RouterBOARD hardware
Topic: ROS 3.X on RB333, rebooting it self
Replies: 10
Views: 2708

Re: ROS 3.X on RB333, rebooting it self

HI

After a long struggle i took the board back to supplier and they gave me a new one. will ask supplier to forward .rif file though.

Thanks
by happydaddy
Thu Dec 06, 2007 7:08 pm
Forum: RouterBOARD hardware
Topic: ROS 3.X on RB333, rebooting it self
Replies: 10
Views: 2708

Re: ROS 3.X on RB333, rebooting it self

Hi

I seem to be having the same problem. Reboots every time. Doubt if its a power issue. POE cable is about 5 meters. Really anoying. Also have two R52 mini pci cards. tried upgrading firmeware no luck.

Thanks
by happydaddy
Mon Dec 03, 2007 3:07 pm
Forum: RouterBOARD hardware
Topic: ERROR: could not format partition RB 532
Replies: 5
Views: 3073

Re: ERROR: could not format partition RB 532

Hello Appears board is still under warrenty and i left it with supplier. I would have liked to however try it but its too late now. if they cant sort it out i will give it a try. As a matter of interest where on mikrotik do i find the *.ftw file. Could not find it in the latest firmware download. sh...
by happydaddy
Sun Dec 02, 2007 9:52 pm
Forum: RouterBOARD hardware
Topic: ERROR: could not format partition RB 532
Replies: 5
Views: 3073

Re: ERROR: could not format partition RB 532

how do i upload via serial? i only have a upgrade option in hyperterminal.

thanks
by happydaddy
Sun Dec 02, 2007 12:00 am
Forum: RouterBOARD hardware
Topic: ERROR: could not format partition RB 532
Replies: 5
Views: 3073

ERROR: could not format partition RB 532

HI I was trying to upgrade firmware but somehow the netinstall gets stuck at partitioning and formating. In hyperterminal i have the following message: Formating disk... Error: could not format partitions Press ENTER to reboot i have formated in hyperterminal but still no luck.Please Help :( Thanks
by happydaddy
Sun Jun 24, 2007 7:34 pm
Forum: Wireless Networking
Topic: what motherboards works with router os
Replies: 6
Views: 2105

what motherboards works with router os

Hi

I am planning to build a pc router board, however i am not sure what motherboards and chip sets can be used anyone have experience in this domain e.g 486, petium1,2,3,4? Also any other considerations i need to take into account?

Thanks
by happydaddy
Tue Jun 19, 2007 1:22 am
Forum: Wireless Networking
Topic: auth.failed on btest
Replies: 2
Views: 3644

Re: auth.failed on btest

Thank You works like a charm
by happydaddy
Sun Jun 17, 2007 9:01 pm
Forum: Wireless Networking
Topic: auth.failed on btest
Replies: 2
Views: 3644

auth.failed on btest

Hi

I am trying to do a bandwidth test to a 532 (lvl4) router from my 133c router (lvl3). i keep getting a auth.failed. Any one know how to fix or alternative way to do bandwidth test to router 532.

Also is it better to have 2 120 degrees sector antennas or five directional antennas ?

Thanks
by happydaddy
Mon Jun 11, 2007 11:30 am
Forum: Wireless Networking
Topic: Stupid Link!!!
Replies: 20
Views: 4882

Re: Stupid Link!!!

Dude i live in South Africa $ means big bucks where i come from and dont get me wrong i am not a cheap fart, i think the mikrotik is the best value for money by far.
by happydaddy
Sun Jun 10, 2007 9:03 pm
Forum: Wireless Networking
Topic: Stupid Link!!!
Replies: 20
Views: 4882

Re: Stupid Link!!!

Hi I polorised the antennas to HP and have enabled nstream.Does it cost anything when i do th upgrade on OS?Is 12 megs tcp the best i can get Or is the PC based router board going to be a better option not interested in going dual nstream so please advise on best way forward. What is best way to upg...
by happydaddy
Sun Jun 10, 2007 7:16 pm
Forum: Wireless Networking
Topic: Stupid Link!!!
Replies: 20
Views: 4882

Re: Stupid Link!!!

Hi I have the same distance link and have about -77, i got: Atheros AR5413 mini pci card, 5ghz 31db grids, lmr400 3 meter cable, 532 router boards and version 2.9.30 . i am also only getting 12 megs.i do have line of sight. Please explain what settings i have to change from default to ? to receive a...