MikroTik

marcelocbf

Hi, I was wondering what you chose for your project. Actually, I'm curious if you had gone with Mikrotik because I have I big area that I need to cover with unwired APs so I need to go for a mesh network, but like you, I haven't seen any implementation of HWMP+. I'll run some tests of course if I go...

marcelocbf

Thanks my friend for the reply, But what is strange is that if that is the case, it should not work when the ADSL line stops working ... right ? ADSL Line UP -> phone registered through ADSL line ADSL Line DOWN -> phone registered through Wireless link ADSL Line UP -> phone unregistered Did you find...

marcelocbf

Hi, I set up some routing rules to route my voip traffic through 2 ADSL lines. Everything works fine, until something happens with the connection. If there is something wrong with the PPPoE-client (ADSL) connection the traffic goes again to the default route (OK), but as soon as the ADSL connection ...

marcelocbf

Just an update ...

I can access (with some difficulty) but successfully the computers on the other side through VNC ... So, no all TCP traffic has problems ...

marcelocbf

Hello, I had this L2TP tunnel working fine for almost a month. But now suddenly it's not working properly anymore. The only thing that I changed in the routers recently was that I removed the admin user from all routers changing for a different username with full access. Here is my config ... L2TP-S...

marcelocbf

Hi, Yesterday I setup an IPSec tunnel successfully, but I found out that if the remote peer would go offline for some reason the tunnel did not re-establish by itself. I kept receiving some errors in the remote router's log saying the "IPSec could not start the quick mode" ... So, I decide...

marcelocbf

Yeah, there must be a problem with the arp=reply-only mode. I changed to arp=enabled and everything is working for 3 days now.

Is there anyone using arp=reply-only with success ?

Thanks

marcelocbf

Hi people, I have three MK running on my network as access points. I have two running for more than 2 years with no problem. I recently bought a Routerboard (the other ones run in a Alix) and I want to move my network to use DHCP server on the APs. So, for this new AP running on a Routerboard I conf...

marcelocbf

Hi, I've just set up Squid to work as a transparent proxy for my Mikrotik access points. My customers that I have behind one of the access points are able to browse the internet, but the ones from the other AP are not. I think I'm missing something. I copied the Firewall rules from one to another, s...

marcelocbf

If the rule number "2" on mangle table does not count any packet, then theres no traffic passing through hotspot chain. You may need to add a jump rule in your mangle table just like the following: chain=forward action=jump jump-target=hotspot The same goes to the filter table, but the na...

marcelocbf

Hi Ozelo, Here is my mangle table, I have even disabled my two first rules, but it doesn't match, it does not count packets. The third rule is the one you recommended me on your last post, and the 3rd and 4th rules are the dynamic rules that were created by the radius client 0 X chain=forward action...

marcelocbf

Those attributes works perfectly. You may missing to put your traffic to flow through the target you specified, no? Ozelo Thanks Ozelo, for your response I don't know ... actually I'm doing nothing else, but I thought it should work this way ... but please give me some directions ... Assuming I'm u...

marcelocbf

Have somebody used this feature already ? Does that work, or am I missing something ? I have tested both Mikrotik-Mark-Id, and Filter-Id and both show the dynamic rules respectevely on Mangle, Filter sections. For the Mikrotik-Mark-Id, make two dynamic rules matching the IP address of the just authe...

marcelocbf

If we use PPPoE How can this be implemented do we need another webserver or we can set up hotspot and than redirect to any of its pages? Any link or referenc about this thing? I don't think you can use the on Mikrotik webserver because you cannot redirect through URL, My workaround is partially wor...

marcelocbf

No ... no bridge ...

marcelocbf

Hello people, I need a little help to understand this attribute returned by RADIUS server. What I want to achieve: I want to redirect the traffic from my "suspended" customers to my server that will have a message for them. What is done: My RADIUS server is sending the Mikrotik-Mark-Id att...

marcelocbf

Thanks jwcn,

While waiting I did a research about IPTables and I found out that it was not possible, so I did a workaround ... My problem now is with the hotspot Mark-Id ... I'll open a new post ...

Thanks,

marcelocbf

Hello, here I am again needing some help ;) I'm using hotspot and RADIUS server ... What I want to acomplish is create a kind of second walled garden for my suspended users. Example: User types http://www.google.com, he/she is redirected to a specific url, e.g: http://www.myserver.com/supended.html ...

marcelocbf

The ones related to smtp I knew ... but the ones with jump-target pre-hs-hotspot and pre-hotspot I thought that's why I didn't manage to get traffic through it ...

I check the rest of configuration ...

Thanks,

marcelocbf

Hello everybody, I'm trying to setup hotspot with no success. After getting the Error - Gateway page, I found out an issue others were having with the default user profile setting with Transparent proxy. I followed their recommendation and I don't get this page anymore, but I'm not able to have succ...

marcelocbf

Hello, I saw an example of doing just what I want in the wiki, but using hotspot, and I'm authenticating my customers through MAC I'd like to redirect all the traffic from customers that are "suspended" to a specific webpage. I thought doing that using the Filter-Id Attribute from my RADIU...

marcelocbf

Hello, I'm using RADIUS authentication for my wireless users. And in my security profile I set up to send MAC as XXXXXXXXXXXX, because I have the information this way in my database. But I'm trying to use DHCP with RADIUS, but I don't know how to set up the MK send the MAC as XXXXXXXXXXXX, I just re...

marcelocbf

Just one more question I could not totally (reliably) test it ...

If I specify an TX Max rate, does MK limit the upload speed until TX, or it doesn't cap the upload speed at all ?
Does anybody know if MK plans to make RX rate limit work with every CPE ?

Thanks again,

marcelocbf

I have a Linux server that controls centrally the bandwidth of each user ... but I'm coding another software that populates a RADIUS database to control BW and get statistics from the MK access points through RADIUS ... but reading the forum I realized that I cannot limit upload speed if the other p...

marcelocbf

Thanks guys ...

marcelocbf

Hello everyone, I'm collecting and studying the statistics that I can get from wireless interfaces in MK. I'm showing this values as a graph, but I'm a little confused about the SNR (signal to noise ratio). I was wondering if there is an "ideal" value for it, because I think it is not like...

marcelocbf

Tom,

Thank you very much for your "contribution" ... they were very helpful ...

marcelocbf

I do not know what kind of client you are using...some have the ability (like MT) to set a scan list of frequencies, that should help in the oscillations as the client will use the list to scan for an AP in sequence and attach itself to the first one it finds (hopefully your primary for that client...

marcelocbf

Hi, I'm modifying my WISP network topology, so if someone has similar scenarios I'd be glad to hear your experiences. I searched the forum and collected some experiences, but not so clear ... I'm setting up a Radius server to authenticate all my users ... and give them their IP addresses through DHC...

marcelocbf

You cannot adjust the power output on a prism card. Use a long jumper... is that true ? While waiting ... I tried to set the manual-tx-power-table to the values I'd like to ... and I'll try to monitor the interface tomorrow but after what you said ... this is bad ... What you mean with "long j...

marcelocbf

Hello, I just bought a Senao NL-2511MP miniPCI (200mW) that works with the Prism Chipset ... I have an 15dbi antenna attached to this card and I cannot have this card's output power because of my regulatory domain ... So I have to reduce the card's output power to 100mW. I have another card that use...

marcelocbf

Or , if you want keep the external party on a different subnet (a really really good idea), just route between them using static route at each end, as in my picture: http://forum.mikrotik.com/viewtopic.php?f=7&t=19568 I use: Subnet for each customer site [/29], one for the backhaul mesh[/24], o...

marcelocbf

Hi ForePoint ...

Thanks for your answer ...
Just one more question ...
Changing it to station-wds, does it loose performance ?

Thanks again,

marcelocbf

Hi guys, I have a question and I would be very happy if you guys can help me ... I have this setup ... Customers <-> Mikrotik <--- PtP ---> Mikrotik <-> Linux Gateway <-> Internet Ok ... I'd like to make my customers' MAC addresses reach my Linux Gateway ... I was reading the if I make a bridge betw...

marcelocbf

Hello guys, I was looking exactly for this solution ... because I need to implement a web-proxy cache in my MTOS (2.9.XX) and I was dealing in how to differenciate both traffic (Internal and Internet) for my customers ... After reading all the posts and happy with the peace achieved :D I still have ...

Search found 35 matches

Re: Unifi vs Mikrotik MESH vs Aruba

Re: Load Balancing / Route Selection not recovering ...

Load Balancing / Route Selection not recovering ...

Re: L2TP mood

L2TP mood

IPSec transport mode configuration issue

Re: ARP mode reply-only lock

ARP mode reply-only lock

Webproxy configuration help

Re: RADIUS attribute Mikrotik-Mark-Id ?????

Re: RADIUS attribute Mikrotik-Mark-Id ?????

Re: RADIUS attribute Mikrotik-Mark-Id ?????

Re: RADIUS attribute Mikrotik-Mark-Id ?????

Re: URL Redirection (Specific Users)

Re: RADIUS attribute Mikrotik-Mark-Id ?????

RADIUS attribute Mikrotik-Mark-Id ?????

Re: URL Redirection (Specific Users)

URL Redirection (Specific Users)

Re: Help w/ HotSpot setup - Invalid rules

Help w/ HotSpot setup - Invalid rules

RADIUS Filter-Id question

MAC Format using DHCP w/ RADIUS

Re: What is the best way to limit upload speed ?

What is the best way to limit upload speed ?

Re: Ideal Signal-To-Noise value ???

Ideal Signal-To-Noise value ???

Re: Wireless Network Topology ... I'd like your opinion ...

Re: Wireless Network Topology ... I'd like your opinion ...

Wireless Network Topology ... I'd like your opinion ...

Re: How to reduce tx-power NL-2511MP (prism) Card

How to reduce tx-power NL-2511MP (prism) Card

Re: Brigde & PtP

Re: Brigde & PtP

Brigde & PtP

Re: Mikrotik + Web Proxy Queueing is Impossible ?