This happens to too many clients for this to be a client problem. /ip dhcp-server add address-pool="192 POOL" always-broadcast=yes authoritative=yes disabled=\ no interface=ether5-local-slave lease-time=1h name="192 DHCP server" add address-pool="192 POOL" interface=vla...
I have a problem with my DHCP server, it seems that it does not want to assign an IP to certain clients, or the clients do not want to use the assigned IP. What can cause a DHCP server to offer a IP without success?? 23:01:45 dhcp,info 192 DHCP server assigned 192.168.1.188 to E0:CB:1D:76:01:09 23:0...
No, remote access to the RB750 with Winbox. (to remotely control the router with Winbox). If you have a Live IP then just configuire that on ur WAN Interface otherwise if you are using some DSL connection then contact ur ISP to configure Port address translation on DSL modem. Yes the Mikrotik is co...
create an Input rule to allow Port 8291 from the internet. /ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp be sure to place it above any rules dropping Input. I would also consider specifying which hosts can connect rather than leaving it wide open. Thank yo...
I tried to use The Dude on my RB750G. But CPU went through the roof 70-100%
Is the RB750 not powerful enough to be used as a router and network monitor?
We have a SIP service from our ISP. The SIP server hosted with them so our phones (8 of them) need to connect through our router to their server. But when I tested it my voice was going out to the one I called, but I could not hear anything. Except at first, I could hear them for about 20 seconds, b...
Its still down, but I get "not available" in the problem row.
Except if I lower the heat value I get the correct message in the problem row "TEMP is over 70°", but the probe is still down...
I have made a CPU temperature probe that seems to work but is always down (Status: down). if(oid("1.3.6.1.4.1.232.6.2.6.8.1.4.0.2")<70, "Temp is under 70°", "TEMP is over 70°") When I change the heat value the correct message is displayed so I assume the information is ...
What is the "API"? I would consider the question "can RouterOS access any other database then the local one without an external RADIUS server?" to be the first step. If this is a feature that RouterOS simply does not support is does not matter what database the teller machine can...
Just to clarify if anyone can answer. The register has a touchscreen, the products can simply be taped via finger... So I would like to add the product "Hotspot 1 hour or 30 minutes or whatever" and the register would write that to a database that RouterOS could then read in some way. The ...
I was wondering if I could let a accounting program (or rightly the teller machine) create a user in some form of a database, and let the user manager read it over the LAN on a Windows computer...? The idea is that a customer buys HotSpot time and the teller machine simply writes the new user in a d...
I would like to know if the following setup is at all possible. Having RouterOS on a PC. Having 5 APs (routers) with DD-WRT firmware with one SSID in three buildings. I would like the user manager to be able to authenticate users from a list. A user comes to the lobby an buys an hour on the internet...