MikroTik

franco

Hello Chupaka,

i tried it befor i wrote in the Forum.
I have this problem for a Long time and i have until now not found a solution.
The Problem is somewhere else.
In the Forum i read about other customers who have the same problems.

Regards

Franco

franco

Hello Yasir,

did you solved the Problem?
I have the same Problem, too.

Regards

Franco

franco

Dear Sir/Madam, We are looking for an Administrator for LAN/WAN Networks. We are a German regional leading Internet Company. We provide Internet and Telephone Services to our customers. As a rapidly strong expanding company with a huge potential, we are looking for a suitable employee. Qualification...

franco

right now a RB 433 AH with RouterOS 5.6 has rebooted.
In the LOG you can see the follow message:

router was rebooted without proper shutdown (cause1)

with the Version 4.xx i never have this problems.
I hope MT FIX this problem.

Franco

franco

Hi,

I also have this problem with two RB 600 Board.
Sporadic reboots are on the agenda.
One routerboard have the Version 5.6 and the other 5.7.

Franco

franco

Hi Normis,

will Mikrotik support other UPS in the future?

franco

Hi,

support Mikrotik UPS from MGE (Model Ellipse 600) ,too?

franco

OK,

dato che Ether1 e WLan sono nella bridge, devi attivare il Filtro nella bridge.

/interface bridge filter
add chain=forward dst-address=224.16.17.0/24 action=drop

Prova con questo.

Saluti

franco

e nella bridge?

franco

Ciao Roberto,

cosa ce nella la bridge?
Chi ha la IP 192.168.2.9?

Saluti

franco

Ciao Videolab,

prova con questo filtro.
dovrebbe funzionare.

/ip firewall filter
add chain=forward src-address=192.168.2.9 dst-address=224.16.17.0/24 protocol=udp action=drop

Saluti

franco

cmit, me too please.
My Email: francesco.l at web dot de

franco

How i can enable the turbo mode in MT?
if country set is Germany, i can't enable 5 GHz turbo mode.

franco

I see the same problem whenever a WDS is joining. I get 4-5 seconds of very high pings on that particular radio (SR5).

This is a big VoIP problem!!!!

franco

I look for SNR.
It's normal.
I don't have much power on Antennas.
I hope Mikrotik find a solution for this problem.

franco

Hello, I have a great problem. My customers (MT in client wds mode) are connected to the Acess point (MT) with WDS. If a customer connect at the AP now, because he had lost the connection to the AP or he turned the terminal equipment on, all other users get a very high ping and time out. What can be...

franco

I use MT adapter with 4 miniPCI slots and CM9 wireless cards.

I try to find out how much can most Laly be attached at a pci Slot.

franco

I don't know.
I use a 420 W Power Supply.

franco

I do this generally.
Unfortunately, it has brought nothing
I am helpless.

franco

Hello, I have a problem several with ASUS Mainboard of the type P5VDC. I operate an Intel 2.6 GHz Celeron CPU with 512 MB of RAM save at this board. I have operate two RouterBOARD 14 boards with 8 WLAN interfaces,too. The problem is, that the system hangs itself up and does not react any more. None ...

franco

hello gpienaar how you solve the problem with the ip pool for pppoe. I have the same net structure. unfortunately, I have a problem with the ip addresses. how I can solve it, that 12 AP with a pppoe server grasping on one ip pool. we forgive the customers dynamic ip addresses. The logon is carried o...

franco

Hi wildnill442.

I put a server with a celeron CPU of 2.4 GHZ and 512 MB of RAM.
Unfortunately, I do not get the desired speed.

I hope you have a solution for my problem.
I imagined now to bundle two Wireless cards.
Does this go also with OSPF?

franco

Hi,

routing-test package is installed.
Can I bonding two wireles interface with OSPF?
I need min. 30 Mb/s Bandwith.

franco

Hello, I have a throughput of approx. 18 MB/s if I connect 3 MT servers (PC) about wireless and let these go in the wds mode (bridge). If I let the net with ospf go, I get 12 MB/s throughput only. (MT1 -- MT3) I get a bandwith of 17 MB/s if data flow from MT1 to MT2. I get a low bandwith if data flo...

franco

Hy,

how can I solve the scenario mentioned above with OSPF and PPPOE?
Must be configured only the PtP ways with OSPF or I must also with ospf configure the sector aerials for costumers?
Can help with somebody?

franco

Hello Freebird I will make it as follows. I will BS1 let bridges mode go in this. WLAN1, 2, 3 and ethernet interface = bridge. I will make the other stations also in a bridge. Sector and p2p aerials. The customer equipment also becomes (bridged WLAN and Ethernet interface) At the pppoe server I esta...

franco

Hello,

I have asked a question and had to notice tonight that this was removed.
why?
It was all about pppoe problems and enquired where one can download an older mikrotik version.

franco

I would like to give public IP's to the customers. With wds bridge about dhcp I assign an IP to the customer equipment. get the customer also an address assigned by my server?(ethernet side) I would not like this. The customer should not be able to access my network at all best. this is I believe th...

franco

Thank you.
Can I do this with EoIP instead of WDS?
I think EoIP is the better way, or not?

franco

For every bridge with the customers equipment an IP must be allocated.
Can one do this also over a DHCP server or is not it advisable?

franco

Is there an explanation now why the 5213 cards do not work in the 5 GHz turbo mode?

franco

Thanks Cmit.

have I understood it correctly?
Must I all interfaces bridges?
BS2 must run about wds with BS1.
the Sectorantennas at BS2 are just the same in WDS mode.
And the client Routerboard are in WDS mode,too.
Is this correctly?

franco

Every customer gets a Routerboard 532.
How I shall this configure?
I mean WLAN1 and ethernet I must bridges, so that the customer can dial in with his computer about pppoe.
Is this correct?

franco

BS1 is the Main AP. this passes the signal on to Bs 2, 4 and 5. I would like a transparent network, so my idea. I do not know now whether this idea is good. on all radio towers apart from BS1 are sector aerials. These care for the customers. Understand I this correctly, I must bridges interface if I...

franco

nobody can give me an idea?

franco

Hello, I have the following scenario. I have several radio towers which pass the signal of place for place on. I would like the customer to dial in about pppoe now. I wanted to use EoIP for it. How I shall the particular adjust radio towers? Shall I bridge the interfaces for every station? Bs 1 is t...

franco

Thank you.

Another possibility give it?
I must activate such approx. 250 IP addresses.
This can get arduous.

franco

Thank you HarvSki.

How I can make this?
Can you give me an example?

franco

I have my network public IP at this run now.
It works wonderfully. (almost)
I must open sebarate port for every customer.
How I create it, to give public IPs with open ports?
Making the large providers like it.

My english

franco

Hello, I have a problem public ip it. my Internet connection has 8 ip adressen. (xxx.xxx.xxx.xxx/29) I have got 128 new IP addresses now and wanted to use these. (NAT 1:1) The ip addresses' area is xxx.xxx.xxx.xxx/25 how can I solve this? if I an IP address give the Internet interface to, this is at...

franco

I would like an aerial (5 GHz, 28 db) install on a 80 metres high tower.
The Mikrotik server is in the cellar.
It is between aerial and Mikrotik server approx. 90 metres of cables.(CNT400)
This is my problem that cable is too long and the signal gets too weak.
How can I solve this?

franco

Thank you for your answer.

Can I use DHCP, too?
So customers have dynamic IP. Customers that need static IP, I type this in "Remote Address".

Would you use EoIP for this network?

franco

http://www.x-dsl-online.de/htm/images/MT.jpg Hello to everyone. I have a question on the passing on of PUBLIC IP. I have 6 IP at the disposal. My MT server gets one. I would like to pass the other 5 to my customers. However, I would not like to use a NAT. If I dial in at my provider and check my IP...

franco

I'd have a scan about and see what polarisation any interference is on, and use the opposite.

How I can do this?

franco

which polarization would you use?
Horizontal or verikal?
It is a control tower with sector aerials.

franco

I has a newspaper article read and wanted to know whether it also concerns Mikrotik routersOs.
Look here http://www.infoworld.com/article/06/06/ ... ach_1.html

franco

Hello,

I need a script, that I can change a system user name every month.
The new system user must have the same password.
It's possible?
So all system user need the new login every month.
Sorry for my bad english

franco

Hello, I would like to build up a transmitting terminal. I would like 4 sector aerials (90°) with two to operate mikrotik router. It is my consideration that I use different frequencies with the same SSID. Is this recommendable? I would like to produce a failure safety also. how could I solve this b...

franco

Is the script for WRAP Board, too?

franco

I use Load Balancing?

I would like use a seperate Internet line only for VOIP.
How I can do this?
It's possible??

franco

Hello,

I have big problems with SIP VOIP.
I can't do VOIP over MT with SIP Protocol.
I Masquered my network.
Can anybody help me with the config?
If I use IAX, all work OK.

franco

HEllo,

what for a NAT type use MT?
Symmetric NAT or non-symmetric NAT?

I search a solution for SIP in NAT network.

Thanks

franco

thank you, I wil do that.
Can I use the MT client with 3 pppoe accout, too?
or does the pppoe account it have to run over each PC?
My english is not the best

franco

Can I configure the MT client with 3 pppoe account or only each PC with one?

franco

so it's better

franco

PC / / wireless / MT AP )))) ((((( MT client ------------- PC | \ | \ | \ PPPOE Server PC I would like that each PC log in seperatly over pppoe. So each PC have a each pppoe account. It's possible? thanks you

franco

Hello,

I have a wrap Board and I can buy an usb adapter for the wrap Board.
Can MT support a Voip phone, that I connect over usb with the MT??
(USB Voip phone)

regards

Franco

franco

two day's ago, I have the same problem again.
I need a solution.
Help me, please.

franco

I have activate PAP CHAP MSCHAP1 and 2 already.
This is not the problem.
Have you an other idea??

franco

nobody have an idea??

franco

It is the problem that MT does not recognize it.
One Session is only if one logged in already not if one wants to log in first.
This has not solved my problem.
I need help urgents

franco

Hello, I have a great problem. I use MT with the version 2.9.10. Everybody dials in with pppoe. Everything runs except for a thing perfectly. I have customers that have a Linksys WRT54G router. This dials in about pppoe. Sometimes this equipment causes problems and tries to build up hundreds of pppo...

franco

HEllo, I have a problem with pppoe client. My clients have linksys router as pppoe client. All works fine. The router connect with MT without problems. Sometimes have the linksys router a problem. It tries to develop several connections within fewer seconds until the limit is reached. Can I limit th...

franco

Nobody can help me???

franco

Hello, I have a new situation. I have 3 DSL lines. 1. 1000/1000 2. 1000/1000 3. 1000/128 Now I have set defaultroute on line 3 and redirect HTTP,POP§,FTP and other services to line 1 and 2. All works fine. My problem now is, If I want connect me with the MT over the Internet with the old IP address ...

franco

Hello, I have a problem with my config. If I configure the MT with one DSL connection (line 1), I can ping this IP (static) from other computer (over Internet) and can connect me with VPN. If I configure my MT with Load balancing all works fine, but I can ping my static ip from line 1.(no connection...

franco

Hello Gianluca,

I have reset the MT completly.
After reset, I have configure the MT without backup's.
I hope, I have help you.

Sometime the problem appear again.
But it's OK.

franco

Hy,

it's possible to limit P2P upload ?
I have a problem with P2P traffic.
I limit P2P traffic.
Clients say, that they have a poor download, but a good upload.
Now I want to limit the upload and download separately.
So clients have more download.

Can anybody help me??

Thanks

franco

HY

i'm really interested, too.

Regards

Franco

franco

Hy,

I have a problem with VPN connections.
If Load Ballancing enable (2 lines from differently ISP),
I can't connect with MT from outside.
If Load Ballancing disable, all works fine.
Why??

franco

Hello,

It's possible to operate Hotspot and pppoe logins in the same time???

My clients login with pppoe.
now I would like to use Hotspot for an Internet Cafe in the same time and of the same network.

It's possible??

franco

With Traffic counter I can log all traffic from MT.
But I need a Windows machine.
I have a Linux machine.
Existed a programm for Linux, too??

franco

Hy,

I have made a static route.

IP ROUTE -- Dest=192.168.2.33/32 Gateway=62.xxx.xxx.xxx

But I have the same problem.

franco

Hy,
I have a problem with clients, that use X-BOX live.
I use load ballancing (2.9.1)
If I don't use the second line, (no load balling)
the X-BOX connection work fine.
Play the client over both lines (load ballacing), He lost the connection after few minutes.
Can anybody help me??

franco

I have resolve the problem.
I have reset the system.
All work fine!

Thanks to all

franco

@maroon

Thank you for your answer.
I haven't windows Box.
I have a Linux Box. It's run at freeradius and apache server.
Can I use linux machine, too??

franco

When the connection are down, I can't ping the Gateway. I can't login with winbox, too. I only see, that the pppoe connection are stable and it sends information but not receive. The DNS can't ping, too. But when all works fine, I can ping always. It's a amusing thing. Now I have reset the MT and re...

franco

Can anybody help me??
It's urgent!!!

franco

DNS Server work fine. PPPOE give the corecct dns. It's amusingly, it functioned months long with this configuration. suddenly went nothing more. If I type "ipconfig /all" (windows) is this the result: IP Address = 190.160.2.100 Subnetmask = 255.255.255.255 Standart Gateway = 190.160.2.100 ...

franco

I have change the value of MTU, but nothing change.
I have the same problem.
Not all my clients have this problem.
hmmm??

franco

No, I'm not using encryption.

Have you an other idea??

franco

My Network topology. Eth0 = Internet Interface Eth1 = Internet Interface (Load Balancing) Eth2 = Local Interface (Clients) 190.160.2.xx Eth3 = Radius Eth4 = Debian Server 192.168.1.250 I work with NET (Masquerade) I hope this Infos are OK

franco

nobody can help??

franco

Hello,

I need your help.
I want setup a Samba Server.
My clients need have access on it.
If I connect my computer direct with the Samba Server, all work fine.
If I connect the Samba Server over MT, I can't connct with it.
How I configure MT, so that I can access to the Samba Server over MT.

Thanks

franco

I need to log all HTTP requests my users make and all P2P traffic.

It's possible?

franco

Hello,
I want to use Satellite DSL for Download and my SDSL connection for Upload.
I dont understand how i can do this.

franco

Hello cmit,

thank you for your answer.
I know, if you an ISP in Germany, you must log Data.
It's wrong??
I have many clients that use P2P.
Thay walk with my IP address.

franco

Hello, I have set simple queues for all clients with Burst. That work fine. Now I have connect a FTP server with mikrotik. It's possible, when clients download over the FTP server, that the simple queues not match the traffic?? My conf: Ether1 Internet Ether2 Internet (Load Balancing) Ether3 Local (...

franco

Hello,

I want to collect Data from each user.(where the user go)
I have a Linux machine.
I search in the Forum, but i'm found nothing.

Can everybody help me!!

franco

thanks. my Problem is, if i want creat a graph with cacti, I have this problem: ../...traffic_in_36.rrd': No such file or directory I want to graph any Client Interface. I have a Radius Server, but I don't think how I can do it with Radius. I would that clients can login and see his Traffic. Can any...

franco

Hello,

I want to graph Interface from Mikrotik with cacti.
I try a lot of configurations, but nothing works.
I not have graphs.
I need your help.

franco

Hello, i have a problem with the PPPOE server. Clients can login, but sometimes they can't download anything. The pppoe connection on the computer show that it sends but receives anything. When clients disconnect an connect again, it can be that the problem any longer does not exist. Can you help me...

franco

That would be cool if it would function

franco

Hello,

can I export total bytes from sinple queues to a database???

I need this, so that clients can see the own traffic.

Thanks

franco

I haven't wireless connections.
My connections are over ethernet.

franco

I have the same problem.
I sent the supout file yesterday to Mikrotik.
I hope they can solve the problem fast.

franco

I have inquired my ISP.
It is not possible.
Have I an other way to make 2 Mb Line??

It's possible download from one ISP and Upload from an other ISP??
that would be a solution.

franco

Hello, I have a problemwith Bandwith. I wanted to order a Bandwith "2Mbps)upgrade today,because i had still one 1Mbps SDSLConnection. Now i can't make an upgrade, why it is impossible. I can only order a second 1 Mbps line. Can I connect both lines, so I have 2 Mbps??? I hope you can understand...

franco

Thomas where you are??

franco

Hello,

I have the same problem.
I thought my MT reboot at4:00am.
But it does not make-
Why this??

franco

I have this problem in Winbox and Terminal.
amusingly.

franco

Hello,

I notice that when I set an IP address on Ethernet Port, it's OK for one day.
After one day it says me, that is invalid.
After reboot, all is OK again.

Why this??

In MT2.8 I don't have his problems

franco

Is there a solution??

franco

It's OK.
thanks

franco

can none help??
I need his script.
I have try with an script for MT2.8, but the script don't works.

franco

excuse me, i have written wrong.
I have 2.9 RC6.
sorry.

I must reboot, than is OK.

franco

Hello, I have found two bugs in RC5. 1. If I go to PPP->Active Connection I can see user who is online, but I can't see RX and TX Rate. If I go to Interface, I have the same problem. After reboot, all works fine. 2. sometimes, when I go to LOG, there is nothing. After reboot MT, I can see log files.

franco

Hello,

If I reboot the MT, all dtraffic data in simple queues are lost.
It's a bug in 2,9 RC5 or it 's normal??
I want kept the data of simple QUEUES.
Is there a possible??

franco

Hello,

I need a script to reboot MT every Day at 4:00am.
Can everybody post the script??

franco

how I can do this with 2.9 ??

thanks

franco

Hello

Is there a solution to reroute al clients (pppoe) to a determined address with first login??
I want to reroute all clients to my homepage
I use MT 2.9 RC5

franco

OK, work fine.

thanks

franco

Thank you for your answer.

But i have more then 10 connections when i start a P2P Programm.
It's like that as if is no firewall rule

franco

Hello, I have a problem with P2P. is there a possible to limit P2P connection?? My problem is, if clients starts download P2P, other clients have problem with the download speed. I have magle P2P, works fine. But the problem is the connections to P2P. In Firewall->connections i have too many connect...

franco

thanks for your answer.

I have read the manual, but never canche.
I have made the same setup, but after 1-2 second I have the max. Limit.
Why is it so??
I need the feature urgently!!
Please help me!!

franco

I have set a link direct to the MT.
http://62.xx.xx.xx/graphs/.......
It's dangerously??

franco

I have a question about graphs on MT2.9.

It is possible to export the graphs to my homepage??
I want, that clients can see the traffic every day on my homepage!!

thanks

franco

Hello, I had already times written, that I have a problem with the burst time in simple queues. My problem is that I can't limiting clients with burst time. My config: Name - xxx Target Address - 192.168.2.201/32 Limit At - --/-- Max Limit - 262144/524288 Burst Limit - 393216/786432 Burst Threshold ...

franco

I have found an othe solution.

/ip firewall mangle add p2p=all-p2p mark-connection=p2p-con disabled=no
/ip firewall filter add connection=p2p-con action=drop

I have set time at the magle rule.
Now work fine

Thank

franco

What can I do ??
This is not a good idea to set TCP Estabilisced Timeout= 00:01:00, because I have a lot of clients that use ICQ.MSN and other chat programm.
Can I use an other solution??

franco

I have the same problem, too
Mikrotik RC5

franco

That means, that the time feature not work with P2P.
for which is this feature good??

franco

Hello, I have a problem with the Firewall on MT RC5. I drop all P2P and works fine. If I set the rule with time (01:00 - 06:00) the Firewall don't drop P2P. Can anybody help me?? I want drop P2P from 06:00am to 01:00am. The time between 01:00 - 06:00 P2P allow. I hope you can understand me, my engli...

franco

Nobody can help???

franco

Hello, I had already times written, that I have a problem with the burst time in simple queues. My problem is that I can't limiting clients with burst time. My config: Name - xxx Target Address - 192.168.2.201/32 Limit At - --/-- Max Limit - 262144/524288 Burst Limit - 393216/786432 Burst Threshold ...

franco

Thank you. in the last day, i have some entries in the log file. i don't know, what this is. The log entries is: - received ISAKMP packet from 81.155.161.43:500,phase1,Identity Protection - peer not configured - received ISAKMP packet from 81.155.161.43:500,phase1,Identity Protection - peer not conf...

franco

I have a problem with an IP address. I have drop all traffic in the "Input Firewall Rule". the only address who not is drop is my VPN connection. This is the log: input->DROP, in DSL, out:(local), src-mac 00:0e:50:3b:xx:xx,prot TCP(syn), 81.169.188.68:50038 -> 62.xxx.xxx.xxx:100 (my addres...

franco

i would like give the clients a download speed of 1024 Kbps.
But after 60 second, MT must limiting the traffic.
I have seen the other post "limiting big files" but that can't solve my problem.
I don't know, what i can still make.
It's a problem, use Burtst Time with pppoe clietns??

Thanks

franco

i iwanr limiting the speed from 950000Kbps /950000 Kbps to 256000 Kbps/256000pbs.

I have forget to say, that my clients dial in about pppoe.

franco

Thank you for your answer. Name - xxx Target Address - 192.168.2.201/32 Limit At - --/-- Max Limit - 262144/524288 Burst Limit - 393216/786432 Burst Threshold - 26214/52428 Burst Time - 65/75 My setup looks so now. When i start a download, i can download with 500 - 530 Kbps (25Kpbs pload). after 75 ...

franco

none can help??

franco

i'm using the client address. I can see the traffic from the client. But it is impossible to limiting the bandwith. My setup: Name - xxx Target Address - 192.168.2.201/32 Limit At - 65536/131072 Max Limit - 262144/524288 Burst Limit - 393216/786432 Burst Threshold - 262144/524288 Burst Time - 10/20 ...

franco

Hello, i have a problem with simple queues. I would like limiting downloads of big files. i used the burst feature in the simple queues and set burst time at 75 second. When i start a download i have full downloadrate. After 75 second i can't see any change. The download continue with full rate. The...

franco

thank.
work fine.
I have an other question.
Can i use the MT and a Radius Server in the same PC and at the same time?

I would like use the Radius Server for Accounting pppoe Clients.
So i can see the traffic for each individual client.

franco

thank you for your answer. It's OK. I would access from Internet, too over VPN. At the moment i can this. But when anyone ping the Router IP over internet, can see the Mikrotik default Page. Can i make it, that only i can access from Internet over VPN. Home ----------------Internet----------------MT...

franco

Can we talk in German?
I have many problems with the english language.

franco

I have done this. no problem, i can access again. i had written this in the Firewall rle. /ip firewall rule input add connection-state=invalid action=drop \ comment="Drop invalid connections" /ip firewall rule input add connection-state=established \ comment="Allow established connect...

franco

about Telnet?
and how??

franco

i have resolve the problem with firewall rules.
But now i can't access to MT.
Can I use a trick to log in??
I have permitted only Network with IP 192.168.3.0/24.
I had made a backup before i change the setting.
My last possibility is to install the MT new, if it gives no trick.

franco

thank you for your answer.

I use winbox from my office to the MT over internet.
If I disable the service, i can't access to the MT. It`s wrong?

I use a VPN connection with a static IP.
If I add my IP in the Firewall, cann I access than??

sorry, but I'm a beginner.

franco

Hello, sorry for my english, ist not the best. I have a question about the MT. I have the version 2.8.26. When the clients, which have the ip addresse 192.168.1.xxx, open the Internet explorer and tap the IP from the Router (192.168.0.254) they can see the Mikrotik info page. The same one is over In...

Search found 142 matches