MikroTik

dwnldr

Hi ! What kind of settings do you have ? Are you using Fast Transition (some devices still cannot live/survive this) and WPA3 (same...) ? For testing purposes try to config your device without FT and secure with WPA2 CCMP only. Also prlomging dhcp lease time and group key update can solve such issue...

dwnldr

Actually the topic was opened by me, but nearly 2years ago when wifiwave2 appeared. Anyways, thank you for your response ! Hopefully this informations will help others also to understand, that the standards are the "max set" and backward compatible.

dwnldr

Anyways, just as an addition. You DONT NEED to use 2.4Ghz "n" standard network settings in order to use thise devices and loose bandwith and waste your routers possibilities ! The settings in MikroTik WiFi interfaces as meant as "maximum-highest". So if you set 2.4ghz Ax 20/40Mhz...

dwnldr

I have a setup where components like ax3 and homepod are present. Im pretty sure, there is something wrong with your config. Can you share it ?

dwnldr

Im here to provide infos when needed. Just tell me what.
It doesnt matter if i use this device as paperweight or run it for testing purposes...

dwnldr

if your reply was aimed to me, then "...after stripping some waste from RouterOS, I have free roughly 800 kB with full configuration, what is good result"... gives me reason to think that something was customized by user

dwnldr

I have tested RouterOS 7.15beta9 on hAP ac^2 with 256 MB memory and it seems that "we are back in good times". :-). After stripping some waste from RouterOS, I have free roughly 800 kB with full configuration, what is good result. Even memory leakage, what was visible in beta4, probably d...

dwnldr

SPAM here, since lot of comments are aiming storage issues... In my opinion : Maybe ROSv6 "package style" where only basic functions was involved in the main package and everything else could be added from extra packages is better way as 5different wireless sets :) But let guys decide whic...

dwnldr

The "restrictions" are the result of illegal use... Honestly, i think we all "tested out" what MT WiFi can do/provide us on "unlimited" superchannel settings and now we are disappointed with range and performance. Honestly, from my point of view is Wifiwave huge step fo...

dwnldr

Im also confused guys... i repeat my knowledges here also : Im using ac2 as a "replacement" till i found my new router. Ill tested yesterday ax3 the second time (dirrent device as first) and i dont know what is happening. I see finally better signal ratio (neither RB4011, ac3 and ax2 was a...

dwnldr

subprofile can be assigned to main configuration profile, which can be assigned to interface. Subprofile values can be overwritten in main configuration profile, and all values can be overwritten on the interface itself. The problem I an see is that often users consider properties set to empty valu...

dwnldr

@pe1chl - yes. Im using wifiwave drivers since they appeared in v7 and on some specific version such issues appears on some devices. Im managing actually cca 15devices in 3houselholds, and it is strange, that such "bug" appeared only on some of them. I canr find explanation for that, espec...

dwnldr

Hi Guys ! I encountered such bug on some previous version of v7 RouterOS, where the WiFi interface IGNORES the security profile, and the result is unsecured network. Tested on wap AP, cap AC XL, mAntbox and recently today on hapAx3, with 7.14.2. For instance 2.4ghz&5ghz interface is configured w...

dwnldr

Hi ! Yes, the documentations are correct. Since WifiWave2 drivers appeared it is like this, it is fixed to your country regulations. You can set only lower output (higher number). Regarding to my knowledges the antenna gain is calculated and automatically set/corrected according to mentioned regulat...

dwnldr

@neki - thank you very much for your response. Honestly, no. I was checking the signal rate of each fixed client and the speed. Reason was what i wrote, fresh ROS via netinstall, same ROS version, everything fixed. 4different devices from which 3 performed worst as a low cost entry level internal an...

dwnldr

Thank you very much guys for responses ! I really appreciate it ! As i wrote, the configurations for ac2,ac3,ax2,ax3 was really the same. Honestly, there is really not too much to elaborate on Wave2 drivers in comparison with legacy drivers. Fixed channels, same channel width, same security profile,...

dwnldr

Dear community ! However im long therm MT user, ill post this topic under this category, since i feel like a total beginner now. I created this topic just to understand "what is going on" in my home and pour ot my heart... I appreciate any idea, workaround, explanation, response if you hav...

dwnldr

Thank you very much guys ! Ill check tomorrow exactly the coax lines. The MOCA isnt cheap, but it costs as "1.5" unit of Audience. From which i need at least 3pieces as Igor wrote. And im still unable to imagine, where should i locate them, in order to push some bandwith thru. @igor - this...

dwnldr

Thank you very much guys for reply ! @holvoetn, i have to check the coaxial wires. im sure, that in "problematic" ROOM4 are some (old) coax connectors (unfortunately on different side of the room, what should not be issue if i put there "AP), but im unsure if such connection is presen...

dwnldr

jaclaz, thank you very much for your reply. Honestly, i found powerline the "dirty" solution, but i have no other option. The first thing is, that lot of powerlines are crap (tested), but the PL7411 runs WITHOUT any issues (two years) and delivers the max rates. The second thing is, that t...

dwnldr

Dear community, since i really dont know "which direction" to go, choose, or if my ideas are correct, i would like to kindly ask you for your ideas. The issue im facing is, how to solve WiFi coverage inside "weekend house", where im sadly not the owner (just a user) and dont have...

dwnldr

We have the great opportunity now with wifiwave2 drivers. It would be awesome to have finally also the possibility (even/probably with R11 swap) to use them on this still great and EXPENSIVE powermachine ! Every single model, even the hap ac2 smokes the 4011 waaaay out with its WiFi performance ! I ...

dwnldr

I would like to contribute to this list also, with fresh amateur knowledges and some introduction... I had a nice conversation with @holvoetn in different topic, about " hap ac2 " and globally "other" models with small (16MB) storage space and "qcom_ac" drivers installe...

dwnldr

@mkx - thank you for sharing those informations ! So, im not "so" nervous now :D I hope the Mant as AP will last as you described. Just to share my informations, the spare hap ac2 acts as i mentioned as a router, now 4th day, still with cca 35-40Mb RAM and 650kb free HDD with 7.13.5 and it...

dwnldr

@mkx - ouuu, that doesnt sounds good. Hopefully "my spare setup" with 650kb free space will last till i found some replacement for 4011 :D But now the "Mantbox" makes me even more scared :-/ Is not the cheapest device, purchased it last summer for outdoor/garden usage and the ove...

dwnldr

@holvoetn - i was just wondering if it fits and if it will run, and as mentioned, it fits :D But of course, it doesnt run :) Hopefully the MantBox with os+qcom drivers will perform without issues with such low free disk space, since it would be shame not to have the opportunity to run wave2 drivers ...

dwnldr

Dear community, im recently in "change" period to replace my RB4011, where im unable to configure the built-in WiFi to "work as it should" and use its .ac (80+80/160) potential. During this period, ill grab an hapAC2 from the closet, configure it and let it run. Since we have the...

dwnldr

Dear community ! I would like to kindly ask you for your opinions and ideas, since im struggling to restore connection between two upper mentioned devices. Just to repeat : RB4011+260GS wired with xs-da00001. All devices are brand new, with default configs, most recent ROS 7.12.x and SWOS 2.13. The ...

dwnldr

@mkx - Thank you for your feedback ! The posted config is the full config of my FW rules. KidControl is on last position just because of my attempts to make first three work... I dont have any FW rules, because my router is behind ISP ONT device with Dynamic IP changing couple of times per day, no p...

dwnldr

@anav - Thank you for your reply !
Exactly as you described. Im here ONLY to kindly ask for assistance about 4 mentioned items in my firewall, and nothing else ! But this forum behaves as usually, as its well known

Im not interested with "support" like this anymore

dwnldr

@mkx - Thank you very much for your reply. I have no other firewall rules, only the posted ones. The KidControl rule appears dynamically, if i set the rule to "ON" or "Resume", so if i would block the connection of my childrens device. Otherwise it is empty. But also the previous...

dwnldr

Dear community, since my question is related to firewall issues, i set my question here instead of creating new topic. I would like to kindly ask you for assistance : I recently switched from "hap ac" to "rb4011". The device was configured by myself, used in same place - with sam...

dwnldr

@Amm0, thank you for your reply !.. but, i send back the device. In last 2hours was my phone again twice detected as "away" by my SmartHome server, and i got message from carrier about missed phone call since i was unreachable. Ordered RB4011iGS+5HacQ2HnD-IN. It looks like as the device wi...

dwnldr

@ToTheFull - thanks mate ! I have one more day to send back the device, so ill have to find some solution, otherwise i would be forced to change to something else. I would like to avoid this, since i have 8 MT devices running at home, garden, office. I really dont want to swap from this ecosystem. L...

dwnldr

Thank you very much guys for lot of assistance ! Im speechless, how much support i get. Thank you once again ! I can export-show whatever config is needed to get some solution, just please let me know what and how. Im not a big friend with linux terminal. Of course im not telling this is MT fault, i...

dwnldr

@BartoszP - Thank you for your reaction. Yes, im familiar with those changes, but since i have fixed channel "1" and "36", which are both standard, allowed channels, skipped DFS etc, i thought it should not affect anything. Also as i mentioned, everything works till some powersav...

dwnldr

@DarkNate - Thank you for your reply. I didnt failed, i made that by purpose. Wifiwave2 documentation clearly shows, that default value is United States, even when country is not set. Since i live in apartment without any wifi, people/objects in neighborhood, i really dont care about bit higher thro...

dwnldr

@mkx - Thank you. Ill provided informations in a way, which was known for me. Now with help of @ToTheFull i exported log for specific mac address... It is for sure "something" in/with wifiwave2, since as i mentioned with same device - same client - but old driver this was not happening, an...

dwnldr

@mkx - Thank you for your reply. Exactly this is how i expect to behave and reply, if somebody made a mistake or need help. I do the same, in same way... Ive posted the pictures as attachments immediately after screenshots was made to provide as much informations as i can. Ill make next time picture...

dwnldr

Can you please help me, what else can i do ? Using 40MHz on the 2.4GHz band is crap (unless...etc.). Set it to 20MHz. Can you share your config on your previous device as well? Then we have something to compare. Thank you very much for your reply. Sadly, the old device was reset and reused in diffe...

dwnldr

what else can i do ?
Stop posting massive screenshots.

Wear eyeglasses, stop looking on them or buy a monitor with higher resolution...damn

dwnldr

Dear community ! Since my troubles are also related to Apple products, i try to ask here instead of creating new topic. I would like to kindly ask you for help, since i have serious problems after upgrading from "hap ac3 / generic WiFi" to "hap ax3 /wifiwave2" and my Apple device...

dwnldr

Dear Community ! I would like to kindly ask for support. We have "outside in Garden" Airplay receiver which is used for streaming (only) Audio content. This specific Garden is outside of town, im glad that i have at least 30MB stable internet connection, and some old 2.4GHz equipment (RB95...

dwnldr

Thank you very much for response ! It is not about legal or ilegal things in my own apartment. It is about usability. Sadly im still facing issues with roaming between 2.4GHz and 5GHz and also with multicast. As i mentioned in other post, i would like to benefit from speed, which is really not compa...

dwnldr

Good day friends !

I think i already know the (sad) answer, but... can you please confirm, if is possible to use ".ax band" on new .ax capable devices also with legacy WiFi driver ?
Or it is limited now only to horrible wifiwave2 ?

Thank you very much !

Greetings
Ronnie

dwnldr

Besides lot of troubles, also facing issues because of lacking multicast helper in wifiwave2...

dwnldr

Dear Friends, so i "locked" via Access List the 5Ghz capable devices to this band. On the mentioned "problematic places" is the signal around "-80", it means "two dots" on iPhone and cca 270mbps bandwith, what would be absolutely OK for me in this places (even...

dwnldr

Thank you very much guys for your reply ! - both bands has fixed channels, so no auto option. It doesnt matter which channel i use, the roaming between 2.4 and 5ghz "works" as i described - the environment is in my opinion not crowded, i can see 3-4 2.4ghz networks, and 1 Ghz network. Noth...

dwnldr

@nichky - Thank you for you reply ! Exactly, this is what i would like to achieve, since with generic WiFi driver and "superchannel" settings was the connection lot better. But how can i achieve this kind of "signal strength" with wifiwave2 driver ? I gave a shot for FT (not all ...

dwnldr

Thank you for your reply. It is actually same question with some updates. I wouldnt like to make forum flooded with same topics

dwnldr

Dear Friends, Mikrotik staff ! I would like to kindly ask you for assistance: Im struggling with my hap ac3 since changed driver to "wifiwave2" ,however the apartment we live is really not big (80m2), divided only to two bigger rooms, didnt have any huge or massive obstacles (Ytong), and t...

dwnldr

Thank you for your comments friends ! Im familiar that we are talking about WiFi Standards, i just would like to mention exactly the "option" directly from RouterOS where "BAND" stands for standard (as you see in the picture above). I would like to avoid confusing and i did exact...

dwnldr

Thank you very much for your for reply, but... I cannot write it else. I ask it other way, i would be thankful for any help : Lets forgot 5GHz Radio and work only with 2.4GHz. How can i define in 2.4GHz radio settings that i would like to use "G" and "N" band simultaneously, if i...

dwnldr

Thank you for your response again. If i configure for instance 2.4GHz Radio, under "Channel" option, or in Interface itself, you need to choose the specific band (2GHz options: AX, G, N ; 5GHz options: A, A/N, AC, AX). But i can select only ONE band ! My actual config is 2.4GHz with N chan...

dwnldr

Thank you very much for you reply. This part is clear, and i already done that, but i would like to know the upper mentioned part : how to configure 2.4GHz radio for G/N bands and 5GHz radio for N/AC bands, since there is option to choose only 1band for 1radio under config.

Thank you !

dwnldr

Dear Friends, I would like to kindly ask for assistance on my hap3ac. Im running recent RouterOS and wifiwave2 package. My goal is to set the "2.4GHz interface for G/N" bands and "N/AC for 5GHz interface ". However there is only 1selection possible, cannot add multiple bands in c...

dwnldr

@rajkosto Thank you very much for your answer !

dwnldr

Dear Friends, i would like to throw away my bridged Huawei EchoLife HG8145 which i received from my ISP (Telekom, country Slovakia). The connection is made with my private router via PPPoE dialing with received username/password. Sadly, the is no proper way avoid using the received Huawei, so im int...

dwnldr

anav, thank you very for your informations. To be honest, the devices i mentioned are alredy "here, bought" so i would like to make the connection with them. The WiFi repeater functionality is just an option, its not a must, so we could leave it. But otherways, there are for sure some trou...

dwnldr

Dear Friends, i would like to kindly ask you to review my garden house configuration and advice some workarounds to achieve better and stable result. Im just a beginner user of MikroTik devices, so the processes and setups i made are the results of searching and some knowledge... Therefore I'm sure,...

Search found 60 matches