Hi, I have 2.4 link that I'm using as a bridge. It is about a 12 mile link. The link tends to drop a couple times an hour for about 30 seconds each time. It's been running since last spring and just started doing this in the last few weeks. Here are the stats: signal strength: -61 tx signal str: -60...

3 532's all exhibiting the same problem. Ether2 just quits working. All 3 routers are on 2.9.50. All 3 within about 24hrs of each other. When we had number 2 go today, I thought "wow weird coincidence". Now after number 3, its a pattern. Anyone else have ether2 on a 532 just fail out of th...

Are those 2 dns servers you listed recursive for the ip address of your mikrotik?

for instance, can you do a nslookup from behind that router and get a reply? ie, nslookup www.yahoo.com. 202.153.32.3

I am trying to add a RB411a as a wireless access point to a network that uses a Cisco 3750g switch. When I plug in the RB, the switch seems to block all traffic to it. I can successfully communicate with the RB if I plug directly in to it with my laptop (using a POE), but when I plug into the switch...

from 2.91 upgrade to 2.9.51 then to 3.x

It was a 32 bit counter and would rollover after about 490+ days. Here is that thread:

ahh... ok, thanks much.

is there a maximum amount of uptime under /system resources uptime before the uptime counter rolls over to 0?

set your dst-nat rules as the posts above reccomend... then, try this in your squid.conf: httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on Or if it's a newer version of squid, this: http_port <ip of server>:<port your proxy listens on> transparent

I've seen that before as well. For me, It only did it when I had the old routing package enabled. Routing-testing package solved it.

I get this error after going through a signup on my hotspot. Authorize.net processes the transaction and I get a receipt emailed to me. I'm unable to login with this new user. If go into the user manager on this router, I can see the user I just created. It has the username, password, unlimited time...

A print server?

this is not universal OS

please stay on routing features at least try

I realize that it's not a universal OS. But what do ntp, dns and proxy servers have do with routing? They are all part Mikrotik.

A print server?

I already did that.
but I cant connect to the board to make support.rif file

now I can ping, but now telnet, mac-telnet, ftp, winbox, ssh and all other does not work.

what shall I do?

Thanks

Have you replaced RAM? or Processor?

I can ping any address on the internet, 10.0.0.0/24 ip's, and my 10.10.10.0/24 ip's. I am unable to ping my 10.10.1.0/24, 10.10.2.0/24, and 10.10.3.0/24 ip's. Below is the output of my routes. Anyone got any ideas? Thanks [admin@MikroTik] ip route> print Flags: X - disabled, A - active, D - dynamic,...

Destination = the Public IP you want to use Gateway = the IP address of your MT private interface Pref Source = the IP address of your MT private interface We're doing this and don't have any proxy-arp turned on. And it works. Also it doesn't work on Linksys routers(well, the befsr41 anyway).[/quote]