MikroTik

erich5470

Thanks for your response... Your information has been very helpful.... If I had some karma left, I would give you some...
Thanks again... Eric

erich5470

Hi, 1) Firmware is included in the v4.17 ROS already. To upgrade firmware from the command line - [admin@test] > /sys routerboard print If the current and upgrade firmware are not the same [admin@test] > /sys routerboard upgrade And press 'y' to continue 2) From winbox, go System > Logging. Go to t...

erich5470

That 532a is running v3.30.. checked it a little while ago using Winbox. It says its upgradable to 3.xx. Apparently, what happened was that PayPal states that they have a firewall which flags your IP address if you try to pay on any computer which you have logged into your merchant account with... T...

erich5470

When I goto processes payment paypal always says my card cant be used. It has said this with 2 of my cards, and i also went to Wal-Mart and got a a card. I have Cleared my cookies and also used to browesers. I got a 500s running 3.5 Paypal looks at your IP address and if you logged into your paypal...

erich5470

There is a way to bypass login page by running a scan, and spoofing your mac as someone else. I did some search on this page and was unable to find a topic on this.

Is there a way to stop this?
http://www.youtube.com/watch?v=1WlfLCfdzlY

erich5470

awesome... thanks.

erich5470

Blocking P2P.... Is this method for blocking X-Box, Playstation and other online gaming?. I would like to block online gaming of XBox and PS and other oline gaming in those categories due to bandwidth consumption. Although, I would like to leave open the option for my users to be able to connect to ...

erich5470

I know this question has more than likely already been posted before. I am just getting back into working with my Mikrotik routers again. I have never upgraded a router OS before. I have been researching it on the Mikrotik WiKi's. http://wiki.mikrotik.com/wiki/Upgrading_RouterOS Also, inside Winbox,...

erich5470

You do not need certificates. In IAS simply simply create a client that corresponds with the RouterOS device and devise a shared secret. Then make an access rule that permits access to the appropriate group. On RouterOS enable the RADIUS client and enable RADIUS authentication on the Hotspot instan...

erich5470

OK, My Bad... Im not paying attention... lol

it shows up at the bottom of the window when you open file menu in winbox.
it shows 36.4 MB of 126.9MB used 71% free...

erich5470

I have an RB532a with a sr2 card. Just wondering how much memory is alloted for webpage storage?

erich5470

Its now been 24 hours of uptime. So far so good... No instances where the radio is crashing. When I was in Iraq doing this, it was vice versa. I had to keep the box inside my hooch/living quarters due to the constant situations of 120-130 deg temps and dust storms outside.

erich5470

OK, so far so good. I took a small plastic bathroom waste can bag and placed it over the box. then, I took some gap filler/canned foam insulation and sprayed it all over the box (seeing how I got the radio mounted to the side of my deck, it looks like a big glob of poop hanging off the trellis...lol...

erich5470

I have the same issue here. Although, my situation is a little different. I just switched out a 3 year old EnGenius Senao router to Mikrotik. RB532A running two SR2 cards. (BIOS nor OS has been updated) card 2 is not active. its for future endeavors. It was working fine this fall. now this winter it...

erich5470

Thankyou... that makes sense...

Just got home from overseas.. everything is secured networking over there. After a while of not using browsers, you tend to forget about the minute details behind the applications..lol

erich5470

Im just trying to give you an option to your configuration needs. I am able to stumble through configurations on my routers; just like alot of others here. I am by no means an expert. nor close to it. I just know what I have did with my routers when I had to have someone remotely do configurations. ...

erich5470

You could do as i did. Temporarily,.. It s a little isky.. because you open your routerbox up to hackers for the time being. I havent had any problems yet though... Then once your configrations are done... you change the IP address and DNS on the routerboard to the new iP and DNS on your local netwo...

erich5470

This afternoon, I successfully setup a hotspot on a radio which consists of: RB 532A SR2 SR5 Level 4 license No Radius Server.... Just using the hotspot option in the RouterOS provided on the routerboard. THE PROBLEM: When I use a new computer and connect wirelessly to the radio. Everything is OK. I...

erich5470

Re: Hey Mikrotik, instead motivate users only showing their page, why dont create an special subforum to contain .html files from users who don't care about sharing your own custom login page ? Would be nicer than only see what is going on around the world! best regards from Brazil, Vicente De Luca...

erich5470

Have you got EoIP or other type of bridged vpn between the radio (encapsulated over the wlan link)? Otherwise, i repeat myself: you have a "conceptual" error on your network, becouse you can't assign IP address of the same broadcast domain (same network) to devices which are routed each o...

erich5470

When you say subnet, If you are refering to the ethers, those are IP's not subnets. Everything is on the same subnet 255.255.255.0 . About the IP, The first two octets identifies the class of my network, The third octet identifies the device and the fourth octet identifies the client. Mmmhh...no, t...

erich5470

Regarding the conf on the first post of this thread: you have an error on your configuration: you can't put an address of the same network on two different devices separate by routing. If you put this on Radio #1 Ether2 xxx.xxx.1.3, you can't put this on Radio #2 Ether2 xxx.xxx.1.4. You have to put...

erich5470

="mipland"]Regarding the conf on the first post of this thread: you have an error on your configuration: you can't put an address of the same network on two different devices separate by routing. If you put this on Radio #1 Ether2 xxx.xxx.1.3, you can't put this on Radio #2 Ether2 xxx.xxx...

erich5470

---- Hai fren, i thing only wds-bridge will help you to find out as your subject, and other ap must support wds and same band, freq good luck... :wink: you can try as ap2ap and it will build transparant network [roaming]. regards Hasbullah.com --- I tried to make the WDS transparent bridge with the...

erich5470

Just wondering if you received the email? because, I got the following message from my mail server. This is an automatically generated Delivery Status Notification. THIS IS A WARNING MESSAGE ONLY. YOU DO NOT NEED TO RESEND YOUR MESSAGE. Delivery to the following recipients has been delayed. <admin@c...

erich5470

Thanks anyhow man, if you do have time some time would appreciate it. No problem.. I have time.. I have lots of it... considering I am unemployed and trying to start this business to create some kind of an income for myself off this WISP. I will get right on it for ya. Respectfully, Eric W. H. Gett...

erich5470

Thanks anyhow man, if you do have time some time would appreciate it.

No problem..
I have time.. I have lots of it... considering I am unemployed and trying to start this business to create some kind of an income for myself off this WISP.
I will get right on it for ya.

Respectfully,
Eric W. H.

erich5470

This is a minimal but effective client/server guide in English from Mikrotik's wiki: http://wiki.mikrotik.com/wiki/User_Manager/PPP_Example This is ONLY for the client side (in italian): http://www.mipland.net/ext_rep_file/DOC_CISAR/42/42_Configurazione_di_RouterOS.ppt "Ough"... That's to...

erich5470

I think here , here and here you can find anything you want. Things like WDS, frequency, radio propagation, etc... is not in the "Mikrotik domain", but in the "general wireless domain", and you can find tons of info regarding that on Internet. There's no Mikrotik's page to help ...

erich5470

Well Begining to notice the help forums are more for people spamming their services for paid help only, dissapointing... I don't see anything like that on this thread. Am I missing something? This post may need to be moved to a Thread called Support B's Gripes and Complaints. Dont get me wrong.. I'...

erich5470

Well Begining to notice the help forums are more for people spamming their services for paid help only, dissapointing...

I am getting the same impression...

erich5470

If you have to use the WDS, then I wonder why they have been telling me to stay away from using WDS?... Dont think they are trying to hide anything from me because, not only are they friends of mine, they are the ones I am getting my backhaul from and I imagine they would want to sell their bandwidth?

erich5470

Thanks, I was kinda wondering if I would be able to use the Gb flash cards.

erich5470

How large of a compact flash card can you use with a Mikrotik Routerboard? I see some of the vendors selling them with 64 and 128 mb flash cars, but never seen anything sold above 128. Just wondering if the board doesnt accept anything larger than that or if there is really no sense in using anythin...

erich5470

I am new to this game... I'm probably just not doing something that is very simple. I am configuring a 5.8ghz wireless backhaul from an exisiting WISP. The two radios consists of two RB532's; each router board contains 2 SR5's for my wireless backhaul. 1 Radio= (1 RB532 and 2 SR5's). I am not using ...

Search found 35 matches

Re: RouterBoard 600 - Failure

Re: RouterBoard 600 - Failure

Re: PayPal not working

Re: PayPal not working

Security Problem, hotspot login bypass

Re: how block connection of p2p?

Re: how block connection of p2p?

Upgrade for the ROS Using Winbox

Re: HotSpot With Windows Server 2003 (Radius Server)

Re: Sample Hotspot Page - Sticky Please

Re: Sample Hotspot Page - Sticky Please

Re: Freezing of RB532 with 2.9.20

Re: Freezing of RB532 with 2.9.20

Re: Freezing of RB532 with 2.9.20

Re: HotSpot Login Problems

Re: Will PAY for CONFIG file [SOLVED]

Re: Will PAY for CONFIG file [SOLVED]

HotSpot Login Problems

Re: Sample Hotspot Page - Sticky Please

Re: Need Help.. Trying to Connect Mikrotik to Another AP

Re: Need Help.. Trying to Connect Mikrotik to Another AP

Re: Need Help.. Trying to Connect Mikrotik to Another AP

Re: Need Help.. Trying to Connect Mikrotik to Another AP

Re: Need Help.. Trying to Connect Mikrotik to Another AP

Re: Quick Setup Question

Re: Quick Setup Question

Re: Quick Setup Question

Re: Quick Setup Question

Re: Quick Setup Question

Re: Quick Setup Question

Re: Quick Setup Question

Re: Need Help.. Trying to Connect Mikrotik to Another AP

Re: Maximum Storage?... and, DHCP Server Default on routerboar?

Maximum Storage?... and, DHCP Server Default on routerboar?

Need Help.. Trying to Connect Mikrotik to Another AP