MikroTik

rednetwifi

Thank you, i will try it out 1st thing in the Morning.

rednetwifi

All of the links are from the same provider, i am sure its a routing or NAT problem, just i dont know where to start.. Any advise would be great.

Thanks

D

rednetwifi

Hello, we have 4 ISP links and we would like to route all traffic going to Vonage down one link? I have tried nearly everything i can think of and i cant get it to work, same thing with everything i try, the remote phone rings, and thats it, cant hear the other person and also does not ring on the p...

rednetwifi

We have 4 links which we would like to monitor by pinging an outside ip address and if the ip address is not available, the script will move the distance of that route to 3. In the routes we have backup links set to distance of 2. So if the link fails to ping correctly it will move the main route to...

rednetwifi

Hi, We have started having a problem with someone who keeps moving there radios to the same frequencies as we are using. I am hoping that it is just a genuine mistake, but it’s happening a lot lately. We would like to know if it is possible to have a script which checks if someone moves on to the sa...

rednetwifi

Dont know what i am doing wrong, but here is my network plan and a copy of the dhcp config. add address-pool=dhcp_pool1 authoritative=after-2sec-delay bootp-support=\ static disabled=no interface=ether1 lease-time=3d name=dhcp1 /ip dhcp-server config set store-leases-disk=5m /ip dhcp-server network ...

rednetwifi

Can someone point me in the the right direction I have a split network and i want to have 1 dhcp server to handle all the leases for the lot. Gateway is on 192.168.0.0/24 - Where DHCP server will be on Local Machines addresses - 192.168.0.0/24 1st Access Point is 10.10.2.0/24 2nd Access Point is 10....

rednetwifi

Yeah i think it is something i am doing as i am sure loads of people use this kind of setup.... Just tying to find out whee the problem could be.

rednetwifi

Is http://www.mikrotik.com/ working right now?

Time: 1840 22/01/2010 +1CMT

trying to download update

rednetwifi

Tried that, and still the same, i have also turned on upnp... But still no ringing..

rednetwifi

Hello thanks for the reply. Yes, the call connects to the person that you are calling, but does not ring on the person calling side. On the vonage system there is no nat settings which i can find. Totally lost.... :? Works fine without the Mikrotik, soon as you put it on all calls go wrong, so its g...

rednetwifi

Hello, possible for some advice please. We have a Mikrotik Gateway running in NAT-Masquerade and a draytek vigor 3300v with 4WAN connections which we load balance over and setup have a static udp/tcp rules so call VoIP goes down one of the WANs, when it is configured like this none of the VOIP ring,...

rednetwifi

Hello, some advise please regarding Queues and Queue Trees. Currently was have over 200 simple queues for our customers, I have been reading the wiki and watching the tiktube and I think it would be better to move over to queue trees and use less power on the gateway. However I have a few questions ...

rednetwifi

I have a few scripts that when you press the Run script button in scripts menu they work perfectly, however when i set them up in the Sheduler they do not run at all. All the Sheduler display information is correct when its going to run and when, but when i check it the script did not run. This only...

rednetwifi

I am running squid 2.6 Stable however the only way I seem to be able to make it work is to set squid with a different gateway other than the MT. We are using a RB600. We have the WAN and the LAN setup as described here http://forum.mikrotik.com/viewtopic.php?f=13&t=26806 Here is a network layout...

rednetwifi

Hello.

Can you post the one which you have working with the spaces removed?

rednetwifi

Thank you

rednetwifi

I would like to try it, is there any links you know of to be able to show me how to do this? Had a quick look at the Wiki, but just about to go up a mountain installing.

Any advice would be very gratefully received.

Regards

Darren

rednetwifi

Hello. We have 3 High speed lines, and currently we are blocking P2P on RB600a V3.10, but since we have installed a 3rd line would would like to open p2p to our customers. Currently we are using the /ip firewall rule all p2p drop. Is there any way to redirectl all p2p traffic to a specific gateway s...

rednetwifi

Hello i have managed to get all my scripts i need working by looking at other scripts and looking at the wiki, however this one i cant seem to do. I have tried examples of other scripts and they dont work. So i am wondering if i have my queue setup correctly for this script. What i want to be able t...

rednetwifi

Anyone?

rednetwifi

Hello. i have managed to get all of my queues working and scripts to FUP people when the go over 4GB, however the part i cant see to find a clear answer to is this.. If the router powers off or reboots we lose all the transfered data information. Can this data be saved so it recovers on reboot, or a...

rednetwifi

Thank you very much.

I get that part now, how could you get up that the ping would go though a ethernet lan of your choice.

Say i wanted to ping the modems gateway though the ethernet card which it is connected to and not from the other LANs.

How would that work?

rednetwifi

I am trying to learn script. Can someone show me how i would do a simple script. To ping an ip address and if no reply shutdown gateways 0 A S ;;; Cable 0.0.0.0/0 reachable 192.168.0.1 1 ether1 1 S ;;; Telefonica 0.0.0.0/0 reachable 192.168.9.10 2 ether2 2 ADC 192.168.0.0/24 192.168.0.251 0 ether1 3...

rednetwifi

I am intrested in this post too, i think they mean,just have to change the ip address for the LAN cards and modems MODEM 1 LAN IP 192.168.1.1 ----> ROUTER 192.168.1.2 LAN MODEM 2 LAN IP 192.168.2.1 ----> ROUTER 192.168.2.2 LAN MODEM 3 LAN IP 192.168.3.1 ----> ROUTER 192.168.3.2 LAN MODEM 4 LAN IP 19...

rednetwifi

Hi, I have RouterOS 3.1 and using it to dst nat traffic to my Squid server.I bet this is going to be a stupid question but here goes. In the Firewall NAT i forward all port 80 traffic to Squid (192.168.0.4) on port 3128, and squid sends it out to the internet on gateway 192.168.0.1 However and i am ...

rednetwifi

This was the config i was thinking of when i was reading the WDS setup for joining 2 networks? Will it work for my plan? 1. Configure CehegnAP Wireless WLANS (Town1) [admin@AP] interface wireless set wlan2 ssid=OfficeBH frequency=5660 mode=bridge wds-mode=dynamic disabled=no [admin@AP] Interface wi...

rednetwifi

Hello, Being a newbie to MT I am in need of some advise. I have downloaded the Manual for ROUTEROS and read it though and still stuck, I have googled what I need and searched the WIKI for assistance (i can hardly find anything on that search box). However with no luck or any further understanding. I...

rednetwifi

ALL WORKING NOW.

rednetwifi

Please help, we have a faulty RB600 AP-Bridge which died today. We have replaced it with a RB433 as we had one laying around and I need help setting it back up as an access point, as we purchased it ready configured so we backed up the config file from the RB600, thought I might get lucky and see if...

rednetwifi

the first link is a config file for RouterOS, i will print out the config and post when i get back in to the office.

rednetwifi

Hello. I have setup something similer for our network, using RouterOS 3.10 and Squid 2.7 I hope you find this info helpful as i had a lot of support from this forum to get it working. Here is the RouterOS 3.10 Config for forwarding port 80 traffic to squid. http://www.rednetwifi.com/images/Proxy%20W...

rednetwifi

Hello we are in the middle of a new network project which has 3 stages. I am having a problem setting up bridge links using 1xRB600 and 2x RB433 Units with 3x AR5413 Radios in each. Please can someone look at my config below and see if you can see what I have done wrong, as i cant get them to link. ...

rednetwifi

yes, correct

Thank you.

rednetwifi

for user manager full functionality you need L6, because L4 will allow you only 20 active sessions (active connections. when 5 people with same username are connected, it means 1 user, 5 sessions). We dont use Auth on the gateway so i guess if 21 people try to connect it will not allow 1 of the con...

rednetwifi

Hello. I have made a machine as an internet gateway which is going to be supporting 100+ Clients. I have been looking thought the microtik website at the software versions. http://www.mikrotik.com/pricelist.php Under User manager active sessions, does that mean the about of people that can go though...

rednetwifi

Hello I have been using squd and working fine with PORT 80 DSTNAT. However we would like to try the ISA cache. ALL I WANT TO USE ON ISA IS THE PROXY WITHOUT ADDING DETAILS TO CUSTOMERS MACHINES I have setup to redirect all port 80 to 8080 on ISA but i cant get any webpages unless i manualy enter in ...

rednetwifi

I have a DST-NAT which i am using to forward request to my external proxy server.. I am new to all of this... The way i think would be easy would be. Write a script which will ping my PROXY server and if there is no reply it removes the NAT rule and when it come back online and starts pinging again ...

rednetwifi

Hello.

Did you ever figure this out, as i am looking to do the same.

Regards

Darren

rednetwifi

Did you every find a solution to this problem?

rednetwifi

Once again thanks to the Forum i was able to get squid now working correctly as a Transparent Cache. Now got to work on failover just in case it stops working. If anyone is having problems configuring squid, please email me and i will send you my squid.conf setup with the RouterOS Config so you can ...

rednetwifi

ok, that seems to be working, now i have a problem with squid i think. I get this error.. :( ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: http://www.google.co.uk User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.8.1.15) Gecko...

rednetwifi

ip firewall
dst-nat protocol=tcp dst-port=80 Action dst-nat to-address=192.168.0.4 to-ports=3128

Would that be correct then?

rednetwifi

I need to install the package, do i need to reinstall the whole lot? I am running on a demo version to get setup then going to buy the licence.

Can i get the package when using a demo?

rednetwifi

oh i think i have been confusing myself more than anything... Will give it a try.

rednetwifi

I did use the windows version, its good but most of the add on appz would not work as they are manly used for Linux etc, but i had not problems with it. 2.6 stable version. Now installed ububtu and setting used to working on Linux... not easy for me as i have always used Windows. If you cant find th...

rednetwifi

Very good questions, i did not think about doing this untill i read your post.

I like the idea.

I would love to know how you get on with this.

rednetwifi

Thank for that post i have added it in and going to test it, as we dont allow p2p over our network... bandwidth issues.

rednetwifi

Hello, Please can some one give me a bit of info.. I have looked at this link http://www.mikrotik.com/testdocs/ros/2.9/ip/webproxy.php and confused the hell out of me.. :? :? :? And i am well still confused.. We run a 2.6 Squid server on a standalone machine. I dont want the ROUTEROS to handle the c...

rednetwifi

Thank you.

rednetwifi

Excellent news... it worked! Thank you so much for your assitance, why did the other rules not work? Now just got to get redirected traffic to squid on 192.168.0.2 and my project is almost done...

Time to backup the system.

Thanks again!!!

rednetwifi

Still Stuck..... can anyone post me a step by step sheet to get this working? PLEASE i am pulling my hair out!!! Please can some one save the day... This must be something i am doing wrong as i would imagine this is one of the most basic funcations... Thought it would not be this hard. Had enough fo...

rednetwifi

# ADDRESS NETWORK BROADCAST INTERFACE 0 ;;; local Lan 192.168.0.251/24 192.168.0.0 192.168.0.255 ether1 1 ;;; WAN 192.168.9.100/24 192.168.9.0 192.168.9.255 ether2 Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade src-address=192.168.0.0/24 # DST-ADDRESS PREF-SRC GATEWAY...

rednetwifi

here is the parts on the export /ip address add address=192.168.0.251/24 broadcast=192.168.0.255 comment="local Lan" disabled=no interface=ether1 network=192.168.0.0 add address=192.168.9.100/24 broadcast=192.168.9.255 comment=WAN disabled=no interface=ether2 network=192.168.9.0 /ip dhcp-s...

rednetwifi

Going to try it now. Thanks for the input

rednetwifi

Ok i have added a DCHP server, and this is what is happening.

I have a DHCP address which has been assigned:

IP 192.168.0.98
SUBNET: 255.255.255.0
GATEWAY: 192.168.0.251

i can ping 192.168.0.251, and i can ping 192.168.9.100

however i can not ping 192.168.9.1 - destination is unreachable.

rednetwifi

Thank you.

I have tried it and it did not work? Going to reset it and try agian, in case i have made a mistake

Would i need to add a DHCP server to the internat network

rednetwifi

Hello. Please can someone help me or point me in the correct direction as i am very new this this. I want to have a machine was acts as a gateway for my network. Can someone post instructions on how i would do this. I have a machine with 2nics Nic 1 192.168.0.251 Nic 2 192.168.9.100 ADSL modem: 192....

Search found 58 matches