Hmm that is interesting got some gear across a large are of Northern New Mexico USA. So hopefully that is just the case. Nonetheless I think I am to upgrade to Long Term. . But thank you for the re-mention of this issue.
Another note is that Powerbox Pro if they have auto power on some units stop detecting power and shut down. There seems to be an odd power upgrade issue that messes with the voltage passive detection on Firmware version 6.49 stable. Again I highly recommend going to Long Term for production devices ...
FYI this version broke our network. 2-6% packet loss. Issue primarily if your pushing greater than 2 Gbps is where we saw this. At our lowest point of operation in a day we are still pushing greater than 2 Gbps. Various CPUs would be pegged on networking and firewall at 100% even though the overall ...
Ok I am confused where to change the MTU size limit. I am RTFM but I am getting confused any place to point me to would help. on how you changed the MTU size on a bridge it seems to be gray'ed out.
We are having the exact same issues. Is this only an issue with the Routerboard CCR 1036 on an older version of 6.41? I have a 1072 as well that I may swap out at our data center. But need to know if the problem is corrected with the ROS upgrade or with a hardware replacement etc.. Do we need a CCR1...
I think our limitation is two SFP+ bonded as a 802.3ad layer 2 with mii are the limitation for our 1036 CCR. Any one else agree.? We hit a ceiling of 2Gb from 2 10Gb SFP+ bonded ports. Any input or suggestions would be welcomed. Does this happen on a 1072 CCR? ROS is 6.41 . Thank you -Sincerely, Des...
Modbus on a mikrotik would make the mikrotik even more valuable! Because you could have one MT that does everything and have an RS232 port or use the USB to MODBUS USB and poll data from an MPPT on a solar site then would allow you to do an SNMP poll from a cacti server and you could chart your VOLT...
From one CCR 1072 to another CCR 1072 witha 10Gb SFP+ what kind of speeds should I see from Mikrotik to Mikrotik using the Bandwidth Test tool? I want to say that it should be more than 1.8Gb for real world traffic but it feels like something is a bottleneck between the two locations. Between we hav...
Just added the Talos IPs to prevent further spread. Pretty scary how it infiltrates a busy box based OS. Thank you Mikrotik for patching this so quickly. In addition I added the following IPs to my Drop DDOS list. This is not a DDOS but any suspicious traffic I get I place it on this filter. So modi...
It doesn't test more than 1Gb at 4:30am with only 300Mbps that is pushing through. It seems to top off at 1Gbps. But I really saw (not less than 6 months ago) the approx of 2Gbps when doing a speedtest (Bandwidth Test BTEST tool from MT to MT ) on my older RB1036s that had the 10Gbps SFP+. Seems lik...
Thanks for the reply that is an interesting link test measuring way. I do not want to stress the boards I have approx 2000 real connections going through and we do not see greater than 1Gbps on an all 10GB SFP+ network from end to end.. So I have just recently started again to run the Bandwidth test...
Any input/insight on anyonelese having this issue would really help. Am I the only one with a 10Gbps as an ISP feed? We are just pushing the limits of 1Gbps and it seems like our feed can not due more than 1Gbps due to using Mikrotiks. I think this is a real issue. Perhaps it is the ROS 6.41.2 or th...
I broke the bond and it is performing better but seems to be a bug or an issue with bonding and using 10GB SFP+ DACs modules. I am running 6.41.2 on both Mirktoiks CCR 1072 both have 802.3AD with MII Layer2 on Mikrotik DACs copper pigtails 10SFP+ wave length 256nm Vend Serial: MCS16l10432 Any one el...
It seems that if you have 10Gb SFP+ and you want to have a 1Gb bottle neck just make a bond between two 10Gb SFP+ interfaces. Not sure how this is a feature.
I will being breaking the SFP+ bonds to see how those works.
Not sure if I am the only one having this issue but I have 2 bonded SFP+ ports both are 10Gb modules (Mikroitk SFP+) But all speed tests are topped out at 1Gb I am running 6.41 ROS to a 6.41.2 Is there an issue with bonded ports? I'm using 802.3ad Mii with Layer2 Any advice would help thanks. -Since...
If you have a bridge on the edge or between the edge and your client you can place queues that allow the queuing to occur on a bridge. This is considered transparent because it is not routed to the edge where most queuing can occur or on the client end point. If it is between the two and it is in br...
They always say let the router route but....I do have my edge router as a simple queue. And we have about 1800 queues on our CCR-1036-8G-2S+ .. With that said yes we are offloading them soon to a secondary device that is nearest to our edge. but as long as the traffic is going through it you can add...
Greetz, So I watch a lot of devices on my network backhauls and access points (like a good network nerd does) but.. I was starting to go crazy with some devices that were pretty far out there on my network, because my alerts to my phone were every few mins to every few hours nothing was making sense...
Hello Fellow MT peeps, What is the Packet Buffer Size for the CCR 1036-8G-2S+ Routerboard? I looked through the hardware specs and I didn't see that info. Perhaps it is called something else please let me know what it is. It seems to be more of the rave these days to match hardware against hardware'...
I think this is a broadcast issue related to the bridge. Read this and see if it helps you. http://www.techrepublic.com/article/how-netbios-name-resolution-really-works/ Yeah I think it is an issue with how bridging works on a MT CCR. I know if I had a CRS it would be able to use the switch chip wh...
NetBIOS this gift to the network admin ;-) Are you running pure NetBIOS and not NetBIOS over TCP ip? Those few customers who still have applications that need NetBIOS all use NetBIOS over TCP IP and the problem we had was NetBIOS resolution from NetBIOS to IP. Most customers solved this with modify...
I get that this needs to be a layer 2 deal but...the CCR 1016 doe snot have a the switch chip so you can not do a master slave scenario like you can with the CRS. Any suggestions to allow valid internal netbios on bridged interfaces work? Yes I googled it and didn't ind anything that helped. Please ...
How do I block amp DNS attacks from my network especially if I have a valid Name server behind it that is getting hit. I must propgate and allow valid requests but I need to turn away the bad DNS rogue amplification DNS attacks. What is the recommended way to do this? Do I block based on the rate of...
Hello Savage, What is to be expected on throughput with your experience? In your experience in the real world of deployment of this technology what was your experience? Trials and tribulations? The link does show a little bit more details but what are other Mikrotikers doing out there with aggregati...
If I use the balance rr what kind of throughput do you think I can get? Do you think if I have 4 or 5 One gibabit ethernet ports bound together I will get around 2 or 3 Gbps? Can you elaborate on why you would choose balance rr?
I do have two Mikrotiks if you look at the original post it shows I have two CCR. So with that said which method of bonding do I use for maximum throughput? Also.. why irrelavent in the TCP stream? Is Mirkotik not the platform for bonded aggegate ports for a comercial roll out? Thank you -Sincerely,...
Hello long time since I have posted here is the scenario: I have a CCR1036-8G-2S+ that can not do greater than 1.2Gb to a CCR 1036-12g-4S with 5 bonded ports doing balance RR mii Layer 2 and 3 LACP rate 30s Is it possible I need at least 3Gb. Do I have it mis-configured please advise. It seems liek ...
Ok I have two interfaces one is a 900Mhz link (WLAN2), another is an ethernet port (ether1) I have a bridge and it has the external IP on the bridge with both interfaces on it. I want to make one interface the upbound and another interface the down. It is all internal to my network. It is just one i...
So it is been a long time but I wanted to share this with you all. I had a punk'r trying to denial of service one of my hotspots by taking up every available IP address. All he did was kept changing his IP address and his mac so that the hotspot would catch him and then use a dynamic IP address for ...
Your very right. I really do like Mikrotik. I just get disappointed when I come across a protocol that is a standard and it is not implemented because there is not enough requests for it. I feel that standards are standards and to be in the industry you must meet all default standards. I will probab...
OMG You do not support LLDP?!! I just rolled out several Mikrotik's into a bank for VLANs and other great networking features because I really like Mikrotik's, but guess what no LLDP. So the VOIP implementation is now going to get very very complicated with no LLDP. One more reason why Mikrotik's ar...
Any help please this is a valid Mikrotik question about the Routerboard SFP module. I just need to know if it is 9/125 or if I am grossly wrong please let me know. Thank you.
Ok I know this is single mode which means it should be 9/125 right? But our vendor accidentally sent us the MaxxWave version that is stating that it is 50/125 SMF here is the specs: http://www.maxxwave.com/solutions/service-provider/maxxwave-single-mode-sfp-fiber-module.html We are having issues wit...
Curious what kind of board were you using? I didn.t think about CPU use but yeah if it is a MT 1XX series board its CPU would be shot, for a 4XX series it should be ok. Which one were you testing on. I will be only using this on a 4XX series and greater; even though I do have a ton of RB 133C and 11...
Hello Mikrotik Scriptors, Not sure if any one has done this but I was just thinking of applications for using the comment fields as variables. I am sure some one else has already thought of this but I thought it would be a really great way to hold a few variables. My question is; how big can a comme...
Do you mean to disable the CPU Hyper Threading? If so I do not think I can do that. These are power Router 732's. There does not seem to be a place to do this. This only started when we jumped from 4.17 to 5.20. I think there is a bug in 5.20 or some setting that needs to be disabled on the routerbo...
I think this has been discussed for all other versions except for 5.20. We have two x86 intel multi processors that both randomly crash/reboot. Is there any hope or insight on what to do with this issue? Out of all processors that have issues; the Intel should really be more stable. Any ways if any ...
Awesome script here is my version for just a 10/100 MT switch. We use the 493AHs at a lot of places. This script seems to help. #Props to Mxena and c0d3rSh3ll revised by Desertadmin :foreach i in=[/interface ethernet find running] do={ :if ([/interface ethernet get $i speed]="100Mbps" and ...
Ok so here is what I have: I have a mikrotik 1100 and on Port 2 I have basically a trunk VLAN with VLAN20 and default on the same interface. The IP address is set to VLAN20 for 192.168.20.0/24 traffic with a DHCP server of the range 192.168.20.200 to 220. On the same Milkrotik different port (port 1...
Here is a question that I am in great need of an answer: Apparently Cisco can do this and I have been trying to get the same results on a Mikrotik. I would love to see the same subnet running and then on a switch have multiple VLANs per port so that the VLANs do not see each other broadcast. This wo...
I mean did you ever get Vircom Radius to work as the auth for your hotspot users or PPPOE or PPPOA customers. All hotspots do not require a Radius manager they can also be setup local to the hotspot. But we are using the RadiusManager3 at all sites this is handy. We have hard set usernames and passw...
Did you ever get this resolved? I use Vircom as well for RADIUS for dialup (yes dial up still exists in a our little town.) I have more wireless customers that I need to control better and I would love to implement Vircom with our wireless and then redirect to a pay now page if possible. If you got ...
How did you resolve your problem? You are able to get Radius Auth to work through a double nat'd environment? If so please post your solution. Thanks. As far as I know you can only do this via a VPN tunnel. If so once again post your solution for the community to see. Thanks. -Sincerely, DesertAdmin
Ok that information is good. Looks like your issue ultimately is some sort of noise or sudden interference burst your getting from some where else. If this is so please post your registration tables with the CCQ the pthroughput, the ACK and the router OS shown on the columns. This will give us an id...
What freqs are the two 5.8s on? This would help to know? Also are they in bridge mode or are the AP and station or both station. More details please. I think we need to focus on the configurations of the 5.8 GHz. The 2.4 will not interfere with the 5.8Ghz so no worries there. but the two 5.8ghz I am...
i think I may be confused on your setup. I thought you had two 5.8ghz freqs on the same pole as a relay with a 2.4ghz AP. If you do not have more than one 5.8ghz on the pole then you should be good. Usually for tower configurations you will relay to another site or to a back up BH and so you could h...
Edimax access point connected to a sector 5.8 link with xr2,grid,mikrotik rb133 i connected 3 clients on it, the ping is pretty much normal and the internet is very good i think its all about wireless interference but changing frequency is not helping, note: there is another AP mikrotik in back of ...
Please post the registration tables with the requested ACK timeout, with the PTHROUGHHPUT and the CCQ. This will help narrow it all down a lot of problems. Thanks
The best way to do a relay is the have the ap use AP bridged mode and use WDS. HAve the relay point use WDS staion with a wds dymanic. When you do bridge mode I have notice that the connection is not at the best download speeds. If you do AP with WDS to Station WDS and use NSTREME you can have the b...
Hmm looks good. Your overall connection is at 88% which means some of your conencted customers are fluctuating in and out of a good connection range. I know that this is probably said a lot to everyone on the forum but I am going to say it too. Please make sure that your AP and your clients are all ...
In the hotspot IP bindings section make sure you include the MAC address of the WDS of the repeater and the bridge and even the wlan interface. I would set the AP to: Bridge 1 includes the WLAN the WDS will be auto added once a connection is made. AP bridge WDS MODE to Dynamic Choose the WDS default...
What is the ACK time on the Wireless registrations of the tower. If you only have under 20 connections on it it should be a dead give away as to who or what the culprit is. All ACKs should be under 50 More than. If not then it is likely that it is a channel confliction. Make sure that all Clients ar...
Yes..! You can do it a couple of ways. I have done this before, where I would setup the regular office computers on a different internal subnet. So hotspot users are 10.50.7.2 to 254 on the DHCP Office PCs are setup as static IP address of 192.168.120.100 to 254 (statically setup) Make sure to setup...
Go with DMAsoftlab.com 's radius manager. The newest version is awesome! It really generated some cash for our seasonal hotspot users. These guys can even do the setup for real cheap. You then just have to modify the pages to suit your ISP. I really like the features it has. Any ways yeah the MT UM ...
Do you have an example of how to send all traffic to the hub with our doing the split tunneling? I think I am confused. If you want an example of my setup I can most definitely post a pict of it. If you need that. Let me know. Thanks.
Howdy!! I have an odd problem. I know that PPTP will do the tunneling exactly how I want it but it is not encrypted(as secure as IPSEC) from spoke to hub. My scenario is that I have a hub(main office) ipsec tunnel to several branch offices (spokes). I need for all of the traffic to be routed through...
You really need to do a mesh where the central area feeds out as a 5GHz signal. Then relay with smaller units for 2.4GHz using the XR-2 cards. Make sure (I know the obvious) to tape the connectors then apply tar strip then tape again to keep water out if this is a purely outdoor project. Also only t...
Best results so far with us has been the SAH-120-16-WB5470-5850. You can look at the data sheet here: http://lairdtech.thomasnet.com/item/ice-provider-wisp-base-station-and-client-antennas/sector-antennas/sah58-120-16-wb? We like this model because it is a horizontal frequency at 120degrees. It sort...
Yes it is excellent for hotspot automated signups and the like. You can also use it for PPPOE auth and RADIUS authentication we currently are using this only for our hotspot users that are located in remote areas. This will even work great for pre programmed CPE gear that you just sell to the client...
So here is the lay out all RBs are using 4.11: INTERNET: RADIUS SERVER ZZ.ZZ.ZZ.125 | | \|/ V external address:xx.xx.xx123 DSTNAT MASQ internal address:192.168.xx.1 | | \|/ V WANside address:192.168.xx.5 DSTNAT MASQ LANside address:10.5.7.1 | | \|/ V Hotspot user:10.5.7.220 trying to auth to zz.zz.z...
Actually Chupaka, These units were never upgraded to 4.x. They have been the same setup of 3.30 since that firm had came out. I figured that they were just RB112 and that they did not really need to be upgraded to the 4.X so I left them at that firm for quite some time. I know that if you do upgrade...
Yeah I had a similar event. So far this month I have had two RB112 expire their licenses. This is not very fair. These units have been in place for years with no software updates except for the board being upgraded to 3.30. What is up with the license expiring. There is absolutely no reason why thes...
Hey scripto-cons! I have added in the wiki a MebRoot / Torpig detector for network admins/ISP who receive alerts form their broadband providers about this horrible infection. This worm tries to dial home to a class B network address range so I have made a tool to help detect the worm activity. You c...
So in 2007 I took a Router OS Training course. It now says that I am expired. Did I loose my credentials as a Mikrotik ROS certified individual? Or does it just mean that there is a new system for the ROS training courses. I do not know if my course was equal to the MTCNA. Any ways this is what it s...
SO I love the 433AHs but..... If they receive an over-voltage of close to 28+v then they shutoff. So here in the South West where the sun can be very brutal our array can push close to 30v which has caused our 433AH and 493AH to shutoff. The solution to this situation is a physical hard unplug to re...
It appears I am having a similar problem with using a php API on 4.10. I just need to change a password and this is my code: <?php require('routeros_api.class.php'); $API = new routeros_api(); $API->debug = false; $myusername = $_POST["myusername"]; $mypassword = $_POST["mypassword&qu...
Very odd.. It seems like the API has changed a slight bit from 4.6 to 4.10 does any one know how to make the following work. It will up date on of my RB that is running on 3.30 while the other one is running on 4.10 it doe snot work. I think the syntax has changed once more. Please suggest where the...
The network A users do not need to see the network b just as long as they both have the same gateway out to the Internet. AS for the VLAN would I then have to tag all devices on the VLAN port side of the Network A or B or ifg I just tag the port then all the devices will know that they are on that V...
You can not do a VLAN with out using a bridge correct? Or do you have an example of how you would do a VLAN so that both interfaces have the same destination but use different VLANS. My problem was always when I would get stuck I would use a bridge but then that would defeat the purpose of the VLANs...
I think it is a little too late for that my network has grown mighty big now. And then we added in the power router about 2 years ago(I think.) DO you know of any ways to VLAN it off or do the bridge filtering so that my traffic to one side of the network will not be seen on the other. See what happ...
Hello, Does any one know how to separate bridges using the bridge filters? I know that I can not VLAN on my Power Router 720 due to no switch chip functionality. So I want to be able to separate my two networks that have the same address scheme but of course they have unique addresses. Example I wou...
And the country frequencies you are using are also noted as different. Did you correct that as well? Use the same country and the same frequency number all the way through. Also I am guessing that your polarities are correct. Please let us know if this trigger an idea thanks. -Sincerely, DesertAdmin
Very true. There is another company that has equipment that can connect supposedly 300+ clients but I do not see how so I am not going to mention that company plus my post will prolly get erased. lol... Any ways you could do it if you use more 2.4GHz in a mesh node fashion and then allow them to con...
You prolly have a competing signal. Or...... Your example shows India as your frequency on one side with superchannel on while the other side is set to "no_country_set" with "manual txpower" on. Please make sure that they are both what ever country freqs you want to use but you s...
I know it is a major vacation time here in the US right now. Not sure where everyone else is in the world though. I think you can not do it because you are would be adding a VLAN to a bridge which would defeat the general setup of what you have. If there was another option like a " VLAN bridge&...
Fame and that comes with fast cars and fast women. :^) I think that was in the beginning of the wiki launch. I wish there was more incentive for the wiki posts via license levels. I try to post when I discover some thing new to help other fellow Mikrotik'ers out. There is a lot of great examples on ...
Good Luck let me know if I can help you any further. Please also make sure you are running at the better 3.30 ROS, I think 3.22 had some really odd issues. I have a lot of my main backhauls and core routers running on 3.30 with a few APs and remote test sites running on ROS 4.6( I like 4.6 it seems ...
The .id number is the user in its sequential order listed in the hotspot username area. For instance I have the following under my: [username@Plazahotelilfeld] /ip hotspot user> pri Flags: X - disabled, D - dynamic # SERVER NAME ADDRESS PROFILE UPTIME 0 ilfeld guest 1w2d2h20m40s 1 admin default 22m1...
Ok I can see that you have the option to see the script but I do not see the part where you can edit it. Or save your file as a different format. does any one know how to do that?
Well the API is meant to change a username at place ".id=*1" I do believe. So you may need to modify the .id value to the corresponding username. You may need to do a find to get the correct id position and +1 ( I may be incorrect.) I think that is the whole problem. Of course this does ap...
Hmm..... I think you have to do a backup to make the backup file but I do not understand how you make it super generic so that it can exist on any router board. I just want basic configs like IP address bound to it and maybe a system name. If so then I can make a custom API to connect so that I can ...
From the routerboard.com product list page: RB411UAHR has it all, just as the name suggests. It has the popular high-speed CPU, a miniPCI-e slot and a SIM slot for 3G modems Am I crazy or do you mean that a 3G modem could possibly work and then with proper configurations you could connect to a cell ...
Isn't 5.0 still dev and not stable. Oh never mind it looks like 4.8 addresses the Winbox crash when you access a VAP. Well I will wait a week to see if this firm is stable enough to deploy. Thanks
WOW! I thought I was going crazy. Yep same here. I can access all of my Virtual APs via the terminal prompt. nonetheless this is frustrating. Any other workarounds or does 4.7 correct this problem? If so why was 4.7 pulled? Are we to see a 4.8 soon instead? Please keep us posted. Thanks -Sincerely D...
Well the CPE2 (the prism) is set to b only mode and the AP is set to B/G mode and CPE1(the atheros) is set to b/g mode. One more thing is that we are using ANI for the rest of the connections. I know that ANI does not work with prism cards but it seems to help everyone else. If I disable ANI then I ...
A connected radio we will call CPE1 that has an Atheros with a 34 SNR -64 Signal Strength with a pthroughput of a 23000 + it is connected via B/G. Another of our CPE we will call CPE2 has about equal connection strengths as the CPE1 but is a PRISM card. Once it starts to pull around 1Mb of traffic a...
If you have a network that is mostly Atheros based is it possible that the majority of my high ACK and dropping Pthroughput is due to a couple of pesky PRISM cards that are still on my network?
Oh wow that sounds like a great feature. Can this be done with a MikorTik or do you use some sort of other appliance or software? Just curious. Thanks for the defining it for me.
Here is our general hotspot splash page. The hardest part about the splash page was making it compatible with IE7, IE8.. Everything else worked great for other browsers. Just a tip to use multiple browsers while testing your splash page. We will prolly have a link to a simple splash for smart phones...
Are you able to ping the proxylizer VM address from your MT? You prolly have the firewalling off but sometimes it does do its own VM addressing scheme; in that case I think you have to placve the VM into a bridge mode. Just a thought.
Yeah I had similar problems. I am not sure if it is a configuration with the VM image I had used or what, but I was not able to get the proxylizer to work either. I think I am a functional non-int at times but I got stuck and I had pretty much the same amount of posts as you did on this subject. Per...
Here is my hotel manager page to change the hotspot password. This is done securely via an https site for only the hotel managers. I have the code to actually change the password of the guest hotel hotspot account on multiple routerboards. It is a two building hotel that has two different MTs runnin...
Here is my newest modification to the page for our hotel managers to change their basic guest account password for their hotspot. All other customers who need greater then 128k will then purchase bandwidth from us. hotelmanagerpage.JPG I have this nicely secured on our https site that is only access...
Awesome that worked!! Here is what my hotspot password page looks like. I have two files that I made but I also use the routeros_api.class.php (of course) on my secure https server. Files: hotspot.php hspot1.php routeros_api.class.php Here is the code for my basic login page for the hotel managers t...
My code is like this and is not changing the password please help. I am able to connect and to pull up the array of information but I can n ot do a set /change for a password. any ideas? I am trying to locate the username ilfeld and then change it to the following test password of yoyo. The username...
This is a non mikrotik related problem. This is a Windows problem that seems to have developed after Windows XP sp2 and Vista. Here is a link to Microsoft's site to correct this problem on the PC that is having the problem. This problem was giving me so many headaches until I stumbled acros the fix ...
Hello I want to be able to show a global or local variable for a users signal strength on the status.html page. Is this possible? I do not think in ROS ver 3.30 you are able to make your own variables visible to a call like say :global test ="test"; and then on the status.html page do a $(...
Awesome so this is the script I got to go and it works! What it does is reconnects and emails me if a certain backhaul gets what I call a dry sock connection. The connection stays linked but nothing passes. It happens during extreme snow conditions out here. Not sure if it is a static case or what b...
Please see or tell me what I am doing wrong. All I need is this script to turn off an ethernet3 port and then later turn it on. But my silly script is not working. I am not using {} is that the problem? Tried different things I can not get it to work please assist. Thanks! /interface ethernet set et...
Hmm I think I went to an Ethernet (like ethernet1) not to the dir of ethernet I think that is where I messed up. Only problem is that I guess no VLAN tagging will work while using the switch chip? Or does this just mean you can not make a VLAN tag on the whole switch? Which is fine I just need the V...
Ok here is what I think you can do because you will have to put some money into this. I say you get your self a 750G make sure it is upgraded to the latest ROS4.x and then enable the switch port in it. Once you have done this then make one your feed interface have all of the VLANS on it VLAN 1-4 or ...
Doush has a very good point. Why are we using indoor protocols for outdoor connections? With the newest release of 4.x the implementation of the 802.11n is very real for our network. This protocol primarily will allow us to handle many more protocol connections per CPE. I have also seen the competit...
I corrected the issue by downgrading and then re-upgrading. But I think the problem was that the X86 PowerRouter732 ran out of flash space when it was upgrading. So I went to the package folder and removed all of the unnecessary stuff and then I was able to complete my upload and then upgrade proper...
I really like 3.30 it seems very stable. No oddities so far. Did you happen to see an improvement with the XR-9 vs an SR-9? I do not see a difference at the moment but I will be do ing a full on install here in the next week or so. Just curious if anyone has seen a diff or not. -Sincerely, DesertAdmin
Hmm I think I see the problem but I think that Fewi is confused. This is very possible check out this link: http://forum.mikrotik.com/viewtopic.php?f=2&t=37926&hilit=switch Chupaka's response the second post says it all, but this post I see is all referring to the 750Gs that have the switch ...
3.30 Not sure if it is actually working as NSTREME but it cleared up my connection when I enabled it. It stabilized the pthroughput and the data rates in a awful area that I was shooting through to the AP from the CPE.
Does the Power Router 732 (Non Routerboard.com product but a mikrotikrouter.com product) with MT OS on it support the Port Switch option? It is a x86 processor. What do I need to know if it will work or not? If so I think this will help me with my VLAN issue I am having by working with a switch port...
Ok I have 3 networks and I need them separated and my configs are driving me crazy. This is what I want to do: network 1 = nn.nn.nn.0/24 on ether 1-7 network 2 = aaa.aaa.aaa.0/24 on only ether 1 and 3 network 3 = bbb.bbb.bbb.0/24 on only ether 2 Do I make a bridge and but the IP on the bridge? Do I ...
The problem was resolved by downgrading to 2.51. I think that the Citrix connections were using an older protocol that had a flaw that was not compatible with the newer 3.30. Any ways downgraded to the last stable version of the 2.x series which is the 2.51 and all started to work once more. For som...
Ok I understand. Now lets say that on this network I have my /24 network still out there but I also have mingled with everything a private network of 192.168.123.0/24 and a 192.168.124.0/24 ... I should be able to separate those two logical networks with VLANs correct? The only problem is that the 1...
Thank you for the advice. Perhaps I am incorrect but I think you are still referring to an network/IP separation which is correct but I want to tag out the ports not the IP network. This should make a virtual port separation so that the broadcast do not go bouncing from one side of the network to th...
Ok so I am not the brightest in here by far but I have a question about VLANs here is my current setup. I realize that this is now a network nightmare and I desperately need some insight on this problem. Does any one have a good idea of how to vlan off my interfaces on the Power Router but keep each...
Yep XR-9 started to work great once I paired them up but I had some SR-9s and I thought hey 900MHz will work well with another 900MHz but they unfortunately did not. Any ways the 900MHz XR-2 did perform even better connection wise when I enabled the NSTREME on both sides. Some how this made the conn...
Yeah I guess this is true that it is not related but it helps to know this I use the MT religiously and did not know this problem with the Ubiquity 900MHz cards that are not from RouterOS related or MT related. It was just a cry for help on this sorry. I just needed to know who else has seen this pr...
I think this will work for b/g mode. I think you are saying that this only works in the b part of b/g mode. Which I thought work for b and g mode. Well if it does only work for b mode only is it safe to say that the preamble mode should be set to both vs long? What does G mode only use? Is it smart ...
Could the Citrix problem be on Citrix's firewall side with a poor SSH or older version? Why would Citrix stop connecting drop connections when it is going through a Mikrotik on version 3.30 last good ROS. The setup is like this: computer connecting to citrix-->MT-->dsl router-->Interwebs -->some whe...
How come Citrix web app will not work with Router OS 3.30 but it will work with 2.43? I do need ipsec VPN capabilities but there are no VPN IP Sec for 2.43 once I download to it.
Ok we have a 493AH and a 532 with two bonded Ethernet cables that are less than a foot in length factory made. On both the 493AH and the 532 I have a bridge with the ports of the bonding and the Ethernet interface I am testing with. So it looks likes this: 493AH Bonding port ether1, ether9 mode bala...
XR-2 is rocking! Well it has been in place for about 2 weeks now and there has been no problems. The one client connection that is really far away is the only one polluting their own connection. It use to look like this; one bad seed and all connected customers would have horrible CCQ and large ACKs...
Thanks for the prompt responses. This is exactly what I needed to know. This explanation makes much more sense. I think our problem is noise. Even if we reduce the number of CPEs we have bad CCQ I think this will improve some of the CCQs which will allow me to migrate a few to another sector we have...
So by increasing the CCQ of the CPEs will effectively allow better connections; correct? Then by the XR-2 pushing more mW to get a better signal to a CPE and by the XR-2 being able to ground out with RF ESD/EMP immunity then the card should by specs be able to clean up and transmit better to the CPE...
Ok I think people are not reading what I am asking here. Not bandwidth connections or mWs. How many customers can simply connect to an AP (access Point) with an XR-2?
I am not concerned with bandwidth. The number I can have connected to any Atheros card currently is only about 34. After that all connected clients start to experience serious radio problems like lower Pthroughput readings and lower CCQ. We have the bandwidth for the sector to hold more than 34 conn...
Has any one used the XR-2? Well I thought maybe I would fish around before I deploy this I guess we will deploy it and I will give you all an update late in a month or so. Thanks
I understand additional mW power. This is suppose to be able to handle more concurrent connections. But I want to know how many. Have you used the XR-2 in your network? If so how has it performed vs a 1W with CM-9.
How many clients can you have on a XR2 vs SR2? I think our SR2 can probably hold about 30 clients with 1M up/down connections. But around 35 connections everything starts to lose quality. So we have an XR-2 but have not deployed it yet. Will this be able to hold more clients or is it just a higher m...
Ok so I have a 493AH with a bridge on it. This is on a noise tower that is co-located with a radio station. We got all of the noise off via some super grounded cables to kill off our "alien noise". All was going great except one known port on the 493AH. It has a switch from inside the radi...
I have the exact same problem it is with a 5GHZ horizontal sector. It does not appear to be a frequency confliction in any way. We have scanned as well as tried other frequencies. Did you resolve your problem if so please post your solution. Thank you. We are running ROS 3.27 with a 433AH and a R5 c...
User Manager features have never come to the table. Look at all posts on this subject. I would give it more love if there was more people supporting or posting back other than wait for the next version of it. I would say go with Radius Manager 3 it is secure and they are very good about helping you ...
Well we have like 2-3 power users on the sector but almost everyone has a 512k connection burstable to 1M up and down. But the problems that we are seeing are not bandwidth by any means but CPE connections seem to go haywire once there is more than 30 CPEs. How does one hold more than 30CPEs success...
Howdy everyone, I know I know this question has been asked before but I wanted to start a new thread with possibly better answers on this. We have an AP that has 44 connected clients. I know that this sounds weird but... Can MT only hold successfully only 34 + or - 4 CPE(all MT) connected to it? If ...
Hey Omega-00 What payment gateway do you use? We are hurting for something and it appears that MT is still working the bugs out of their usermanager with paypal and customizations etc.. We are thinking about getting DMA Softlab Radius Manager Billing System v3.6.1 What are you thoughts on this or do...
I do not see any type of pay pal or authorize connection yet. but I do see some places where youc an change the logo and the title page. which is awesome. Maybe I am just slow but I do not see any paypal stuff.
Hmm nothing is mentioned in the changelog. I will download and see but I see nothing indicating this. So no more User Manager revisions on the version 3, just on the new ver 4 beta? If this is true then when do you think a stable release (at least non beta version will be out.) Need something produc...
BTW.... Any news on the unicorn known as this User Manager? Any news to keep our faith up on this would be great.
At least string us along a little more.
Pitchforks and torches!! Storm the castle! yeah I sorta need something for our hotspots and I do not want to use another companies hotspot software like the rest of the world has. I would like our own that is customizable. I have a new hotel going in soon and I would really like to use a new userman...
Any chance the May month will be added on the http://www.epicwinrar.com/conficker/ site? Just curious. Thanks for all of your hard work this is great. I really needed to get this under control most of our users that are infected are hotel guests on our ISP. Thanks again for you hard work. -Sincerely...
Well so far it does not seem to be a working product. I think it is an experiment with no real research on it. I can not fine any one who is using this and or who can explain much about it.
WOW! Thank you very much I will try to figure all of this out and we ar eplanning to remove the AMPs off of our networks. I think we currently only have like 3. Nonetheless I appreciate your posts very much. Thanks!
I do not know the exact dbi of the sector we have up there my biz partner would know that better. I will definitely find out more on that. The distance is pretty small it is in a galvanized enclosure that is about 1-2 ft away from the antenna. I am sorry do you have a URL to the EIRP PTMP that you a...
Howdy, Is there any other reasons why? I do not understand why they would make amps perhaps they are not meant for 2.4ghz wireless? Why would a company make AMPS are they only for back hauls for great distances or are they for CPE side and not APs? I want to remove the amps from our network but I wa...
So is it good to AMP and if so why not? We currently have a 532 board on a tower that has a CM9 with a 1 watt amp on it. I think this is a bad configuration. What are your feelings and experince with using AMPs. We also have a cavity filter and we are thinking of deploying it but have uncertainty as...
Well the Pseudo bridge did work I guess Vonage doe snot like to exist behind a double nat'ed firewall. The problem was resolved with the error on the VBOX. The problem is now it sound slike water. So I have implemented the VOIP QOS through our our network. This has helped but I thinkt he problem now...
The ATA they are using ( i think this is what you are referring to) is the Vonage V-portal router with support for up to 2 Vonage lines and one WAN port and one LAN port .
Ok how about using a pseudo bridge? Just a thought.. I have the setup like this. Public IP on the AP xxx.xxx.xxx.10 and then the internal is using a masquarde of 192.168.183.1 so the CPE connects via MT with an external side of the CPE as 192.168.183.21 then it has its internal nat'd address of 192....
Any follow up on this I am having the exact same problem. Is it because the customer is behind a NAT on the AP and the CPE has a NAT? If this is correct I src/dst nat'd a separate public IP to the CPE's internal address and I then forwarded this onto the Vonage box. No luck just the same error of &q...
True but my point was more that you can not use the dns name ending in .local ( a none encrypted splash page.) Not sure if this is a bug or not. I do agree that all auth pages must be encrypted.
Greets to all, Well I have always had problems here and there using the DNS name. Since the problems I never have re-enabled it and all went well. One of the biggest problems that I had in the past was with the hotspot DNS name ending in local. Like this: hotspot.desertgate.local .. This did not wor...
Cartes is very correct on the rural area deployment. That is pretty much the boat we are in. It is nor feasible for a fiber roll out. We are in a very NON-affluent part of New Mexico. So wireless is the only competition against Qwest's DSL. And we want to be able to provide more than just a few Mb b...
Broadband 2.0 is referring to providing more bandwidth to your customers. Virgin announced that they will be providing 50Mb via FTTH this summer in the UK. This is not about a standard for your country it is a bout a standard for the rest of the world. You can not live in a b/g world any more unless...
This is true if you have multiple Nat'd firewalls (lets say 2 or more) than the UPNP does not seem to work. And if you have multiple users/clients behind that one UPNP firewall the ports get allocated and it does not seem to work. I have had this problem from day one. What I do is I usually either d...
Yes FTTH is the best that is understandable. But for a WISP to survive in the market we must compete to a closer degree then b/g mode that is not bidirectional. We must become a bidirectional symmetric provider of 10+Mb(UP and DOWN) to the customer. The problem is that the CPE side I do not think ca...
Here is a company that did offer broadband 2.0 via wireless, but they are now shutdown due to a law suit with Qwest. I guess law suits with Qwest makes them angry and they don't like that so they will unplug you. Any ways. The company is called SkyWi which is wild because they reside in my state of ...
Any plans for the future of Mikrotik and the Broadband 2.0 world? ftth Is becoming abig kille ro f wireless but in our State here in New Mexico we have seen problems with companies like Qwest. They are trying to deliver broadband 2.0 but they can not. If Mikrotik had a project to spear head this mar...
SO is it always bad to block invalids? Could invalid packets possibly be valid or it doesn't matter it is recommended to drop all invalids? I just see such a high volume of invalids I wonder if that is causing a lotof problems on my networks or perhaps they are all just torrent junk and it doesn't m...
What is considered an invalid I have notice this drop invalid on my firewall rules that had a a high hit count. So I decided to log it. This is what I got: 02:18:43 firewall,info INVALID DROP forward: in:D1S1 out:ether1, src-mac 00:00:CC:12:0 6:f5, proto TCP (ACK,FIN), 192.168.165.5:1790->207.141.27...
I have our usermanager at a central external location. We will call the usermanager address of 63.123.123.15.. My hotspot is located with an external of 63.123.123.16 and it has an internal of 192.168.123.1/24.. Once you logon to the usermanager at 63.123.123.15/userman (not user but userman).. I lo...
Is there any way to do a form injection so that we can make another webpage customized so that we can send our data to the usermanager webpages. The idea would be so that we can have our own customized signup page with our own logos and then when the next button is clicked it would do a form injecti...
That was the solution I was pointing to the internal address. I misunderstood that step the first time through reading it. Thank you very much I can now get some sleep.
This is odd because my problem accepts the payment and will charge you but the usermanager never activate the new account. Does any one have an idea as to what I am doing wrong. I have customized our login page with links to the signup page as well as a link to the usermanager and of course my login...
Hello, Has any one seen this? I have a central radius server (192.168.100.1), I have a a hotspot at 192.168.100.2(external) internal 192.168.2.1(internal) My laptop connects and gets an IP address of 192.168.2.254 If I go to google.com I get challenged with the splash page to login or to signup with...
We were told in August we would see a new usermanager to allow us to add in our logo. Is there any possibility in seeing that soon? Jsut been really anxious to have that feature.
Any figure this problem out we still see problems and we are running the latest current version of 3.13 with the firm upgraded 2.16 we thought it was a 333 board problem so we swapped to 532a and still have the same problem. Is this an ARP crash problem or something like this? I think it may be base...
Well I know of a workaround. The problem is that it it is redirecting to a name that does not exist in the public world so a reverse lookup causes a problem. SO to make this all more universal and compatible I have removed the DNS entry for the hotspot. I did the following: ip->Hotspot->Server Profi...
Has any one seen this? We have one customer who is running AVG Internet Security 8.0.152 (Anti-virus from Grisoft) and it seems to block the hotspot splash page. I do not see any place to actually stop AVG other than removing it. This is the licensed version, the free version allows you to stop AVG ...
SO even though everyone always mention just do it with OSPF no one really knows how to do it? I do not understand why this topic was even deleted before. I would hope that those who helped the previous thread get deleted to at least add something constructive to this one. Any help would be appreciat...
How do you create a new article once you log on to the wiki site? The help file is someones question about a LAN issue. Please advise on how to add a new article on the wiki.
I do not think that I need a bridge but who knows maybe I am incorrect. I know this must be easy for you guys out there but I just can not think of how to do this.
Here is a generic diagram of what we want to do. We want to have static routes instead of OSPF but what would the routes look like on the individual MTs?
Well I added to some posts that got the whole thread deleted. So I am starting a new one please do not post anything about NSTREME and regulations on this thread. Ok the wiki of: http://wiki.mikrotik.com/wiki/OSPF_to_simulate_full_duplex_links_with_redundancy Has too many errors and is incomplete. S...
Our situation is we have a dual nstreme backhaul with two RB 333 all with r-52H(350mW) cards. Both sides report a great connection of -65 with good pthrough puts. But through out the day for no reason my wireless connection will drop completely. Not sure why it happens, not a power issue or a Ethern...
Yes we do have ntp configured on them but I guess we do not need them if NTP is a problem. It also seems that we have stream lined this router configs down because once a day our BH drops for no reason. connection looks fine all day until it decides to just stop talking to the other side and then th...
Hello, After a reboot our two RB333 (that both work as a backhaul link only about 2 miles apart from each other) will stop recording their graphing once they reboot. They will stop recording with a reboot even if they have store-on-disk checked mark for their resources and the like. We are running R...
We have a high cpu on our RB230 board once we upgraded it from 2.9.51 to 3.4. We thought that this could have been jsut a random fluke and then noticed one of our other 230 borads doing the exact smae since it was upgraded to ROS 3.4.. Any clues? Is this a known problem? I do not see any bug fixes f...
it doesnt seem to work though, we have a random problem of locking up RB333s right now, i have ping watchdog enabled, but the box hangs up, needs power cycle to restore it. if ping watchdog was in hardware, it would always be up or rebooting, these RB333s are totally hung, dead OS, no console respo...
That is odd but your correct it is working. Might as well remove the GO and the SEARCH buttons. Any ways thanks for responding I use the wiki almost daily.
I can not for the life of me figure out how to make my hotspot users auth with our Vircom Radius server. If any one has any background on this I would love to hear from you. I am running an older Vircom with a MT vs 3.1 x86 version. Here is my output from my VPRacct.log: Mon Mar 03 17:43:28 2008 Acc...
Hello, I am having some problems with a couple clients who connect to my hotspots and they have wireless routers on their side of the network so it goes like this: client->Wireless router (wgr614 netgear)-> CB3(senao) client in bridge mode--> AP(Hotspot) -> Internet Well if I ever have a user plug i...
I know you all are working hard and all. But a lot of times I need valuable information that seems to only exist on the wiki.mikrotik.com site. But the search never works for me. It use to work but now it never can find anything I am looking up. So what I do is use google with the keywords of "...
I know the solution to this problem. I was staring at the exact configs on two of my core routers that had duplicate configurations. There was one difference. I used hotspot.desertgate.com and on the other one I had hotspot.desertgate.local The problem is that the Mikrotik can not interpret (or seem...
I am having a problem with one of my customers and their xbox live. Apparently they can game and the like online but they are not able to chat and see friends. I understand that this is mainly a Microsoft related question but we are having problems with just a few things and I do not want to give th...
It is poitively a problem with the NTP package. Which is sad becasue it is so critical. But I have notcied this exact same problem now from 2.9.39-2.9.41 I thought it was some hotspot code that I was trying out on my home MTunit for testng purposes and then I started to notice this exact same proble...
Ok here is what I needed in my radius attributes.. I didn.t need Framed-User but I needed Login-User Radius Attributes Editor - -------------------------------------------------------------------------------- Default Template Name: DesertPPPoE Framed-Protocol PPP Framed-MTU 1500 Service-Type Login-U...
Well it is an older version of rodopi with Vircom. It populates the vircom jsut fine I jsut need to knw the radius attributes you are to use with a PPPoE connection. I think once I have that then I will be able to figure out the hotspot auth.
Hello I have found this thread: http://forum.mikrotik.com/viewtopic.php?t=3354&highlight=rodopi I cannot figure out what attributes I need for the PPP on a hotspot to work with my RODOPI accouting system. I can get it to auth and I know the password is working but I have an error that occurs. If...
I discovered how to connect to MT that are using the prism cards as the AP. If you are using WEP you must set the wep key to the "required" and on the MT client side you must set the prism card wireless security to "optional". Why it doesn.t work in "required" mode is b...
Do we need an atheros based network or will it all work with the PRISM cards for WDS? If it doesn't matter is there any pro/cons with sticking with our prism based WDS wireless network vs Atheros WDS? Jsut curious maybe I am setting it up wrong. Any remarks would be very helpful thanks. -Sincerely D...
I have looked over much of the manual and I think maybe I have missed this solution but here is my issue. I have a network that consists of a 192.168.123.0/24 network on the internal. I would like to set up network that is only for the hotspot such as 192.168.1.0/24. When I do this this works just f...
Is it possible to have two IP addresses on the external IP and have one external IP be dedicated to DHCP NAT'd internal hosts. While the the seond external IP is dedicated to one internal NAT'd IP address. How can you make it work with the firewall settings? Any advice woudl be much appreciated. Tha...
I had a question for all of your MT guru's. Is it possible to have two external IP addresses go to two different gateways for instance one gateways is on a t1 and the other is on a 4MB DSL line. If you could do that how can you make it so that soem internal IPs go to one gateway while others point t...
So then you really must have a 1 GHZ or better to provide best results with the mangler. We just have the standard 266 processor on the Router board and so of course that is not enough for the mangler to work properly.
Thank you for that command but I would rather not kill the p2p. See if you kill p2p then you are really not killing it. p2p will function on a different port and change its standard port numbers that they use to do the initial communications and that would sorta make the whole mangling process a lot...
How do I effectively deploy the mangler against p2p users? I mean I know what commands to give the RouterBoard but the CPU jumpts to 80+ percent which really can kill the operation of the routerboard. I think perhaps this was a bug in 2.8.26. Should I just upgrade to the newest one? I have not seen ...