MikroTik

gbh

Hi danielm It seems that I could not get the host names to show up unless i add it manually to ips.txt. Both DHCP and DNS are on the routerboard. I have noticed that when I go check on localhost/ip, all I get is: DHCP Leases: Static DNS: DHCP: 0 Static: 0 --------------- Total: 0 Any resolutions to...

gbh

OK just tried as you suggested and started a speedtest(.net) and CPU shot up to 100% again. Max throughput throughput with proxy on and your suggested settings is 42.12 Mbps (and 220ms ping) (roughly the same as when using cache on disk and unlimited cache size as previously). Then ran another test ...

gbh

Try to disable cache on disk, also Max cache size to none. System NAND is for operating system not for proxy cache and it is slow, try with this settings. Why you need proxy ? Thanks for your reply. Will give it a try and report back. I am using a USB store. Proxy is for testing purposes to decide ...

gbh

great script, many thanks.

gbh

great script, many thanks.

gbh

I have the same issue on a 433uah, have turned off web proxy until I can find an answer

gbh

has the fixed version been released (via the main download page)?

gbh

http://www.zte.com.au/telstra/Product_Downloads/MF633_downloads.htm I have it plugged in to a 433UAH and it is detected as per: [admin@SkunkMikrotik] /system resource usb> print detail 0 device="2:1" name="RB400 EHCI" serial-number="rb400_usb" vendor-id="0x1d6b&quo...

gbh

Sydney
I'll be there.

gbh

Damn, I was a tester and purchased already...8+)

Any reason some of the options under tools are greyed out (like ping)?

gbh

no issues here yet on my 433uah, too afraid to try it on my 450's after the last beta...
will see how it goes.

gbh

Ok, couldn't take it anymore... Downgraded back to beta 2 and now all my problems have gone away.
Will wait for the next release

gbh

I think with this unstable Beta 3 we should have a Beta 3 1/2 or a Beta 4 ASAP

hope so...I'm getting tired of having to climb into the roof at my office to reset my 450's

8+)

gbh

now I'm also getting the "connection refused" when trying to winbox in on my 433uah as well as 450's

gbh

supout.rif -> support@

done, many tx.

J

gbh

I have an issue with a 433uah since upgrading to 5.03 (bootloader is also updated) that periodically when logging in by winbox the response comes back as "connection refused" This can only be rectified after a hard boot or(as the interfaces eventually die as well) after watchdog reboots t...

gbh

warwick09: Actually 5.0B3 is pretty stable. Its been running perfectly for me on a RB450G and 750G, aside from the MetaROUTER console window not working, But thats ok, not a big deal for most people. That said. No one should try beta's unless they are at least reasonably skilled in handling adversi...

gbh

2.27

oh and btw the routerboard I refer to in my post above is NOT a 433uah it's a RB450

gbh

I have an issue with a 433uah since upgrading to 5.03 (bootloader is also updated) that periodically when logging in by winbox the response comes back as "connection refused" This can only be rectified after a hard boot or(as the interfaces eventually die as well) after watchdog reboots th...

gbh

I have been able to reproduce this under both full (CPU) load and also very low load (5%)...
also seeing the exact same thing under heavy and low network utilization from btest (by playing with btest settings

Also have seen this exact same behavior on the following now:
433uah
750g
x86 based

gbh

Any idea why I am seeing the below?
Everything is fine on the btest side but there are regular drops on the router side but no pings are lost...?
?

gbh

OK, I took the plunge.
Can confirm 4.4 is working nicely on a 433uah, 5 hours or so, no issues.

Also upgraded on an x86 platform and 3 x 450's.
All good at the moment.
Many thanks.

gbh

OK, I can't be a guinea pig this time.
Can some 433uah users post back here once they have upgraded..

8+)

gbh

Several different flavours of Micro SD have given me hell on my 433UAH - not detecting, killing performance, detecting then dissapearing.

I have given up on MicroSD all together on this board.

gbh

gbh, it is very important to get more information about your configuration, we need support output file from the router in 4.3, when the problem is present. Please send file to support@mikrotik.com
We have upgraded few RB433UAH, it seems they are working fine.

sent

gbh

my pleasure..you guys do a fantastic job and have a great product, it's the least I can do. (I am slowly replacing all my routers to MK, now up to 5).

gbh

I just purchased a SanDisk 4GB MicroSDHC card and it won't work on my 433uah...back to USB for cache store.

gbh

I might be wrong but I think max cache size is the max size of an object that it will cache rather than the total overall size of the cache.

gbh

ok no prob, I'll re upgrade tonight and generate it for you.

gbh

ok, just installed 4.3 on a 433uah and it basically turned two of the interface into "ghost interfaces" (everything looks normal, no traffic going over them)
downgraded back to 4.2 and all good again

Just an FYI

gbh

yes, thanks guys.
All good now.

How does the MK cache work in terms of when the allocated space fills...? is new data written over on a first in, first out basis?

gbh

Is it possible to tell the MK web proxy (not parented) to not store content form a particular site in the cache?

gbh

yes, me as well and I do on other networks.
this 433uah is just for my home use so I thought I'd give the sd option a try

gbh

excellent, many thanks Normis.

gbh

Hey,

Just bought myself a shiny new 433UAH.
Has anyone experience with using the MicroSD as the web cache?
If so, what brand/size of MicroSD card have you used/can confirm works please (I'm about to purchase but just want to make sure I get a confirmed working brand!).

TIA

gbh

Sounds like a great new feature.
I normally receive an email for each new FW update.
Didn't see anything for 3.30?

gbh

Hi Felix,

Many thanks for your comprehensive reply.
I'll test this out and come back to you.

Much appreciated.

gbh

Had a search through the wiki but couldn't see anything specifically for this

I'd like to receive an email notification upon each routeros user log on (not user manager)
Has anyone set this up previously?

gbh

thanks normis, that's a great starting point for me.

interested to hear if anyone else uses different approaches also.

gbh

I'm thinking of a semi automatic approach to importing a text file of badhosts/etc into the mk firewall.
is anyone currently doinging something simlar?

gbh

I should mention I have this issue on a 450 with latest fw as well

gbh

any thoughts from anyone using tftp at all?

gbh

I have some routers that I would like to be able to pull the config from for backup purposes. These routers can write to a tftp server. this has been helpful so far: http://wiki.mikrotik.com/wiki/TFTP for the life of me I am unable to get them to write anything to my MK tftp every attempt ends with ...

gbh

thanks for clearing that up normis, had me worried there for a minute....

gbh

Hello,

only rb600 and rb100 support web proxy this only is for cf cards.

Really????????
holy crap, lucky as I was about to buy one of these to do web proxying on.....
That's pretty lame as I imagine 99% of people would want to use the SD for this.

gbh

is 3.21 publicly available yet?

gbh

is there any way to have the routeros show resolved address rather ip's in general (if I was willing to live with the increased resource consumption)?

gbh

I'm not a big poster but certainly a happy user.
Well done on this from MK!

I'm in Australia and hope to see some of you at one of the Indonesian events one day (that's the closest to me).

gbh

yes, thanks for that.
I was hoping not to have to go down that road.

gbh

1: YES - big time
2: would be used for upgrading other devices, phones, etc.
3: my feature requirements are very simple, straight tftp server/client with ability to change listen port

gbh

Sorry for such an obscure question but does anyone know if watchdog can send to a second address?
I have scoured the wiki and manual and can't find any reference.

I need to send out to two emails on different domains..

any help is greatly appreciate.

gbh

that feature would have made my life much more enjoyable if implemented recently..

Search found 52 matches