Thanks and appreciated
Thanks and appreciated
I'm using radius and the way u do just will assign to simple queues.Why not set limit to profile and add user to various profile groups with different speed limit?
Can u share and give the example in v6 and v7.It's still there, only you have to create routing table in /routing/table/, it doesn't happen automatically as in v6.
Using passthrough solved the issue. ThanksCan only have one mark.
What do you want to achieve, maybe another way of doing it?
Can it use for 3 phase power Cabling house?100Mbit
Already done.
All MACs are unique
Make the two PPPoE interfaces (with interface ether4), set address 20.15.64.1/28 on ether1 and it should just work.
be sure u enable the "Use Ip Firewall" in the bridge, settings...i have the same prb, the simple queue is limit only if i have the ip behind the 192.168.88.00 LAN. if i want to limit the IP in a separate interface the limit didnt work
You need to put in a filter rule (preferably in the RAW table) to block the blacklisted IP's
I can see the ip in the blacklist, however, the ip in the blacklist still attempting to access according to the log ...To block ssh and ftp bruteforcers, use this one
http://wiki.mikrotik.com/wiki/Bruteforc ... prevention
port number for IP Cloud??????
pptp TCP (IP Protocol 6) port 1723 + IP Protocol 47 GRE
l2tp UDP (IP Protocol 17) port 1701 + IP Protocol 50 IPSec-ESP or IP Protocol 51 IPSec-AH
do you mean to set the signal threshold ???You can force roaming and the device has nothing to do with that. Devices does not apreciate when ap has changed. For them, the ap is always the same!What do you mean by thatYou can fine tunning roaming using accest lists
On 100% power my microwave owen can transmit up to 200mbps with 2x2 and 40mhz channel to heat up my meal in about 2 minutes.
in menu "Tools -> Profile" you can see which process uses the CPU
Janisk,there are no changes in scripting. Just that you can fetch large files. Larger than 4GiB
How possible the 【Metal 5SHPn】 can like the microwave, most of the microwave with low cpu speed but can achieve 360Mbps?No one sentence about wireless improvenments, so it means - no improvenments in this package?
Does somebody tested seamless roaming in different cap modes? Does it work?
I'm just waiting for 2 baseboxes to come so I'll test it soon. Just wanted to know if someone did it already.
Regards.
Any plans about integration with Dude ?
28Mhz,how wide channel did you use?
what is so unbelievable? If your local regulatory domain allows use of wider channels there are no issues creating link.
Just trust me.Dear Deac....
in fact, i really have no ideal about this...
if you don't mind, you can tell me more which i will learn from it...
In case of two sequentially connected 6.8Ah accumulators you will have at least 14 hours.
Amen.
P(W)=I(A)xU(V)
I=P/V
Time to scool now?
hi...~14h
it seem there is no news at about this request...RB800 is very old model. They may develop something similar, but it is likely totally different beast (and is using Mini PCI-E slots instead).Hi,
Mikrotik, since you have SFP model, why not add the SFP to RB800 or similar routerboard?
ops...This is a wireless card. What you mean by Netinstall on it ??
http://routerboard.com/R5SHPn
how if compare to ppc and AR9342?AR9344 is newer generation. It looks like it has lower clock speed, but the CPU is actually faster.
Similarly like Pentium 4 maybe has 3GHz, but Intel Core processor is faster at 2GHz.
then you should contact mikrotik, for sure you need to perform netinstall before ask for RMA...Why do you want me to print screen? Ive been using mikrotiks for years, I know how to create users.
I think this is a defective unit.
信号太强会出现的问题:这可以想象得到是讯号干扰,那是因为你的讯号值太强了。。。昨晚死活弄不上来,而且昨晚上2点了吧差不多,有时候估计超过2分钟都没有问题
尽量调到-45~-55dbm。。。
信号太强也会干扰的啊?
Yes, i know that. I won't even connect to network if i don't put scan list. Here is snooper. Highlight is my network. As you see it has lot of free channels around my freq.
you mean the antenna to the tplink wireless card cable length is 60 feet???\server side equipment . metal 2shpn with 15dbi alfa antenna ... and on client side tp link -wn7200nd with 60 feet external pannel 15 dbi wifi antenna ..
这可以想象得到是讯号干扰,那是因为你的讯号值太强了。。。昨晚死活弄不上来,而且昨晚上2点了吧差不多,有时候估计超过2分钟都没有问题
all rates fixed的模式会比较好运用。。。hi,zhangxiao,你的RB951G-2HnD无线在Advanced Mode-Tx Power-Tx Power Mode=card rates 的情况下可以更改发射功率么?我的在V5.25版本只有all rates fixed模式下才可以更改。
u can do that, but u only can work under the 11a with 20Mhz channel width...Good day!
I need to used this card R5SHPn with rb433 and sector ubnt 120' any one try this card with sector
I need good traffic and good ping
can you tell more how you cover the 500 wifi user.Yes, is 1 service I will require, most products I had seen support radios, thanks.
Any product advised?
don't worry dude, we have some board running from years 2009 till now no issue...sometimes my RB running for 5 days nonstop, and running just 18hours everyday. i'm bit confused, when i bought RB433AH and arrive, for firstly running i see bad block there.
see this...Thanks for response.
I have to see that. But I have a question, LACP what is the user of in switch?
hi thanks...We order from gmesupply.com.
I just got a new harness, Elk River Peregrine, and love it.
Router will not become slower, however i would suggest against use of 4 high power cards in such configuration
is the RB800 performance remain the same if i using 24Watt poe???JP5 - DIS POE Jumper
This jumper will disable the 802.11af compatible smart PoE, and also lower the undervoltage protection
threshold to approx 10V, allowing to use this device with passive PoE in 24V Solar power installations.
if it shorted, it use the DC jack or i can use the POE???You must short the JP5 jumper, then it will work.