Community discussions

MikroTik App

Search found 254 matches

by dunga
Tue Jun 28, 2016 6:33 pm
Forum: Beginner Basics
Topic: Upgraded my Internet but still get the same speed through Mikrotik 2011
Replies: 9
Views: 2852

Re: Upgraded my Internet but still get the same speed through Mikrotik 2011

Any command line for the configuartion.

That will be helpful for me
by dunga
Tue Jun 28, 2016 5:25 pm
Forum: Beginner Basics
Topic: Upgraded my Internet but still get the same speed through Mikrotik 2011
Replies: 9
Views: 2852

Re: Upgraded my Internet but still get the same speed through Mikrotik 2011

I think your problem is most likely that you're getting used as a DNS-amplification reflector in DDoS activity. Note that you're getting ssh login failures from various sources... You didn't show any firewall filter rules, but given the above log entries, it appears that your router is reachable vi...
by dunga
Tue Jun 28, 2016 5:08 pm
Forum: Beginner Basics
Topic: Two networks and DHCP server
Replies: 9
Views: 25327

Re: Two networks and DHCP server

I have a challenge to setup such network, where there are some systems that required to only access their software but will be on static with different ip range like the server/software, then other on hotspot. How will I achieve such setup where some systems will have a static only on the range of 1...
by dunga
Wed Jun 15, 2016 1:57 pm
Forum: Beginner Basics
Topic: Disable Internet at Certain hours !!
Replies: 19
Views: 25595

Re: Disable Internet at Certain hours !!

One other thing - it's pretty common for chains to have accept rules for established,related connections early in the list for performance reasons. If your forward chain has such rules, then when "internet blackout" time comes, it will only block new  connections. Connections that were al...
by dunga
Wed Jun 15, 2016 1:17 pm
Forum: Beginner Basics
Topic: Upgraded my Internet but still get the same speed through Mikrotik 2011
Replies: 9
Views: 2852

Re: Upgraded my Internet but still get the same speed through Mikrotik 2011

I have similar issues with my routerboard RB2011, but in this case if I connect thru router it gives varying speed but when I connect thru laptop, i get a higher bandwidth from the ISP Here is the setup for my router jun/14/2016 19:03:25 system,error,critical login failure for user tech from 91.224 ...
by dunga
Wed Jun 15, 2016 12:50 pm
Forum: General
Topic: SLOW/DIFFERENT BANDWIDTH FROM MIKROTIK AND WINDOWS PC
Replies: 1
Views: 880

SLOW/DIFFERENT BANDWIDTH FROM MIKROTIK AND WINDOWS PC

Hello Freinds, I am faced with this issue. I have a 4meg up/down fibre connection from my ISP, but when I run speedtest or bndwidth test from differnt sites, I get different and lesser bandwidth if I connect thru mikrotik but higher banwidth if I connect thru my laptop. I am using RB 2011Uias as the...
by dunga
Thu Jun 02, 2016 4:17 pm
Forum: General
Topic: Firewall rules for time based
Replies: 7
Views: 15460

Re: Firewall rules for time based

Here's a real life example from my friend's router. He's blocking his daughter's phone from the internet according to the day and time in the comments below. Here it's blocking by MAC address but that's easily changed to IP address or your subnet. Current time when I copied this is Friday so none o...
by dunga
Fri Apr 15, 2016 11:44 am
Forum: General
Topic: RESTRICT FACEBOOK AND YOUTUBE STREAMING BASED ON OFFICE HOUR FROM 8:00 - 4:00 (08:00 - 16:00)
Replies: 21
Views: 23172

Re: RESTRICT FACEBOOK AND YOUTUBE STREAMING BASED ON OFFICE HOUR FROM 8:00 - 4:00 (08:00 - 16:00)

The above code, Where do you put it and how do you implement them in mikrotik. I mean the l7 filter, mangle and other commands that linked to it, so that I can try it and give feed back. This is very important as people are required to concentrate of their work from 8:00 - 16:00, but can do their f...
by dunga
Fri Apr 15, 2016 11:00 am
Forum: General
Topic: RESTRICT FACEBOOK AND YOUTUBE STREAMING BASED ON OFFICE HOUR FROM 8:00 - 4:00 (08:00 - 16:00)
Replies: 21
Views: 23172

Re: RESTRICT FACEBOOK AND YOUTUBE STREAMING BASED ON OFFICE HOUR FROM 8:00 - 4:00 (08:00 - 16:00)

Have you tried ^.+(facebook.com|youtube|iplayer).*$ I use it to block these sites Where you put that string? Hello all, Thanks for your inputs, Solar77 and others, The above code, Where do you put it and how do you implement them in mikrotik. I mean the l7 filter, mangle and other commands that lin...
by dunga
Fri Apr 15, 2016 10:52 am
Forum: General
Topic: Firewall rules for time based
Replies: 7
Views: 15460

Re: Firewall rules for time based

Hello all,
Can someone share the firewall rules that applied to such settings.

Mine I need to block internet connectivity in the network (No internet browsing from 7:00am - 16:00) but allow sharing of files in the network for every time of the day
by dunga
Fri Apr 15, 2016 10:50 am
Forum: General
Topic: Time based firewall rule
Replies: 10
Views: 10891

Re: Time based firewall rule

Hello all, I am faced with some sort of similar problem. I was asked to block internet connectivity in a mikrotik router and allow traffic from some time. What I want is to allow traffic or internet connectivity from 7:00 - 16:00 but block internet connectivity on the network from 17:00 to 6:00am. I...
by dunga
Mon Apr 04, 2016 7:25 pm
Forum: General
Topic: RESTRICT FACEBOOK AND YOUTUBE STREAMING BASED ON OFFICE HOUR FROM 8:00 - 4:00 (08:00 - 16:00)
Replies: 21
Views: 23172

Re: RESTRICT FACEBOOK AND YOUTUBE STREAMING BASED ON OFFICE HOUR FROM 8:00 - 4:00 (08:00 - 16:00)

Using OpenDns will jot work for me because we are not using a public or live ip, rather thru a USB/3G network connection.

Does opendns work with ip not live ip?
by dunga
Tue Mar 29, 2016 6:04 pm
Forum: General
Topic: L7 and youtube
Replies: 17
Views: 38998

Re: L7 and youtube

This is my Layer7-protocol: /ip firewall layer7-protocol add name=Bittorrent regexp="^(\\x13bittorrent protocol|azver\\x01\$|get /scrape\ \\\?info_hash=get /announce\\\?info_hash=|get /client/bitcomet/|GET /data\\\ \?fid=)|d1:ad2:id20:|\\x08'7P\\)[RP]" add name=streaming regexp=videoplayb...
by dunga
Tue Mar 29, 2016 5:42 pm
Forum: General
Topic: RESTRICT FACEBOOK AND YOUTUBE STREAMING BASED ON OFFICE HOUR FROM 8:00 - 4:00 (08:00 - 16:00)
Replies: 21
Views: 23172

RESTRICT FACEBOOK AND YOUTUBE STREAMING BASED ON OFFICE HOUR FROM 8:00 - 4:00 (08:00 - 16:00)

hello Friends, I am faced with this challenge to setup a network using mikrotik in an office environment, where we have to block and restrict the use of facebook and youtube streaming in the network. This is because the limited available bandwidth will not be enuf for all the staff, assuming the sta...
by dunga
Tue Mar 22, 2016 1:03 pm
Forum: General
Topic: Block Torrents & p2p Traffic 100% working on all versions
Replies: 60
Views: 180762

Re: Block Torrents & p2p Traffic 100% working on all versions

Asume you want to block torrent & p2p traffic on 192.168.1.0/24 replace ip according to your need /ip firewall layer7-protocol> use winbox to copy paste name=torrentsites regexp: ^.*(get|GET).+(torrent| thepiratebay|isohunt|entertane|demonoid|btjunkie|mininova|flixflux| torrentz|vertor|h33t|bts...
by dunga
Tue Feb 09, 2016 2:34 pm
Forum: Beginner Basics
Topic: required help to create DHCP for 1000 users
Replies: 4
Views: 6562

Re: required help to create DHCP for 1000 users

Hello guys, I am faced with such but mine case is that, in that network range, we are expected to access 1pc in that network. The scenerio is this, 1pc is the database which all systems on the network will connect to to access an information, which about 1000 users are logging at the same time. if s...
by dunga
Thu Feb 04, 2016 1:13 pm
Forum: Beginner Basics
Topic: HOW TO SETUP A DUAL WAN AND FAILOVER FOR A NETWORK and RESTRICT FACEBOOK BASED ON OFFICE HOUR FROM 8:00 - 4:00
Replies: 0
Views: 798

HOW TO SETUP A DUAL WAN AND FAILOVER FOR A NETWORK and RESTRICT FACEBOOK BASED ON OFFICE HOUR FROM 8:00 - 4:00

Hello Friends, I am faced with this challenges to setup a network in such a way that they have 2 ISPs so that when one link goes down, the other link takes over, if the 1st link comes on, it switches over to the 1st link. The target also is to make sure that staff or users on the network do not brow...
by dunga
Wed Dec 02, 2015 9:36 pm
Forum: RouterBOARD hardware
Topic: Does Huawei E303 or E173 work with RouterBOARD (also E3372)
Replies: 14
Views: 7903

Re: Does Huawei E303 or E173 work with RouterBOARD (also E3372)

Hello sir, can you help me, I have E355 and stops working after 5mins unless you reboot router, the connection hangs, even to login to Mikrotik base box 2 become difficult.

Thanks
by dunga
Wed Dec 02, 2015 8:59 pm
Forum: General
Topic: why is Huawei E355 not working well in BaseBox 2
Replies: 0
Views: 889

why is Huawei E355 not working well in BaseBox 2

Hello all, I have this problem with Huawei E355, it stops connecting to internet after every 5mins, until you restart the router. This problem has been happening and not working well as required. I have created dhcp client with lte as the interface, can log to the Huawei E355 with 192.168.1.1. How c...
by dunga
Mon Nov 09, 2015 11:58 am
Forum: General
Topic: 3g signal strength
Replies: 3
Views: 5694

Re: 3g signal strength

Hello, Mine runs this way [engineer@centre] /interface ppp-client> info number: ppp-out1 modem-status: call in progress pin-status: no password required functionality: full manufacturer: huawei model: E173 revision: 11.126.16.05.200 serial-number: 860015019027074 current-operator: 62160 (cellid unkn...
by dunga
Tue Nov 03, 2015 4:45 pm
Forum: Beginner Basics
Topic: Layer 7 facebook block
Replies: 29
Views: 166550

Re: Layer 7 facebook block

plz, I need these type of setup for our network. We want to block facebook for some staff from 9am(9:00 till 15hrs) but allow it for some systems, using their mac addresses to except them from the facebook blocking.

I need the steps and possible way of doing it.

Thanks
by dunga
Mon Sep 28, 2015 3:22 pm
Forum: General
Topic: How to Block Streaming Video
Replies: 5
Views: 19457

Re: How to Block Streaming Video

Hi All But what about when the configuration without use a proxy ? My mikrotik version 5.2 (RB 1200) use Layer 7 like below: # \.(3gp|mov|mpe|mpeg|mpeg2|mpeg3|mpeg4|mkv|avi|flv|f4v|f4p|f4a|f4b|x-flv|msi|wmv|mp2|mp3|mp4|swf|rm|rmvb|vcd|pdf|dat|iso|nrg|bin|cab|vcd|ogg|wma|divx|d2v|qt|0[0-9][0-9]) - D...
by dunga
Wed Jul 15, 2015 12:29 pm
Forum: General
Topic: RB912UAG-2HPnD-OUT: Setup and configuration with intergrated mini pci-e sim
Replies: 9
Views: 4317

Re: RB912UAG-2HPnD-OUT: Setup and configuration with intergrated mini pci-e sim

A ppp or LTE interface should have appeared, what modem brand/model are you using?
Nothing like ppp or LTE appeared on the interface.

The modem brand is Atheros communication, version1. see attached picture. Thanks
by dunga
Tue Jul 14, 2015 7:19 pm
Forum: General
Topic: RB912UAG-2HPnD-OUT: Setup and configuration with intergrated mini pci-e sim
Replies: 9
Views: 4317

Re: RB912UAG-2HPnD-OUT: Setup and configuration with intergrated mini pci-e sim

have made the changes as instructed but did not see how to make the sim card work or the interface for the sim configuration appears anywhere.

See attached picture here:
mini pcie enabled and installed.jpg
Where else could i go to get it done.
by dunga
Thu Jul 09, 2015 2:28 pm
Forum: General
Topic: USB 3G modem issues
Replies: 5
Views: 3966

Re: USB 3G modem issues

Hi You first have to disable the flash cd drive on the MF667 modem for routeros to recognize it as a modem at the port. You can use Putty to issue these commands on Windows.......................How? Disable: AT+ZCDRUN=8 Now use Putty to connect to the modem and issue the AT+ZCDRUN=8, it should res...
by dunga
Fri Jul 03, 2015 11:05 am
Forum: General
Topic: RB912UAG-2HPnD-OUT: Setup and configuration with intergrated mini pci-e sim
Replies: 9
Views: 4317

Re: RB912UAG-2HPnD-OUT: Setup and configuration with intergrated mini pci-e sim

To use the internal SIM you have to add a mini-PCIe modem to the mini PCIe slot. (This disables USB)
I had done such but cant see the interface or the SIM interface in the router board. Is there any other way to enable the mini-PCIe card to be detected in the routerboard.


Thanks for your reply
by dunga
Tue Jun 30, 2015 12:33 pm
Forum: General
Topic: RB912UAG-2HPnD-OUT: Setup and configuration with intergrated mini pci-e sim
Replies: 9
Views: 4317

RB912UAG-2HPnD-OUT: Setup and configuration with intergrated mini pci-e sim

Hello All, I have been trying to see if someone can help me configure or setup this device to use internal SIM. I want to make use of the internal sim in the mini pci-e so that it can connect with the GSM provider in my area, so that instead of using the attaching my USB dongle on the usb slot, I ca...
by dunga
Tue Mar 10, 2015 11:11 am
Forum: The User Manager
Topic: MAC authentication in the User Manager
Replies: 3
Views: 8055

Re: MAC authentication in the User Manager

Hello all, I know this post is old but I need help on how to implement this with hotspot. I have setup a hotspot for a school, but the school want a situation where some laptops in the Library will just connected to the internet without the splash or login page, but on my own, I want all to browse a...
by dunga
Fri Mar 06, 2015 1:22 pm
Forum: General
Topic: USB 3G modem issues
Replies: 5
Views: 3966

Re: USB 3G modem issues

Hello
I have the same issue.Anyone with better solution so that I can get my usb modem to work on the rb with 6.18 OS.

See what is displayed when I inserted the modem,
zte mf667 picture.jpg
by dunga
Tue Mar 03, 2015 11:23 am
Forum: General
Topic: RB912UAG-2HPnD- How to make use of the SIM for internet
Replies: 4
Views: 2313

Re: RB912UAG-2HPnD- How to make use of the SIM for internet

You didn't said anything about the modem...to few details anyway. You will get no help for just "I want to use the SIMcard as my main connection" Also I believe you know that the phone is also an radio modem and your sim can't connect to the mobile antennas whithout an modem. Thanks Inox,...
by dunga
Mon Mar 02, 2015 2:29 pm
Forum: Wireless Networking
Topic: Sierra Wireless MC8790 on RB912UAG-2hpnd
Replies: 22
Views: 9963

Re: Sierra Wireless MC8790 on RB912UAG-2hpnd

The device has a SIMcard slot, which I have already attached or connected to the router, it is just to enable it to work either in ppp-out client or another way so that it will be the main source of internet connectivity for my lan and wlan.

please I need assistance on how to make this work
by dunga
Mon Mar 02, 2015 1:53 pm
Forum: Wireless Networking
Topic: Sierra Wireless MC8790 on RB912UAG-2hpnd
Replies: 22
Views: 9963

Re: Sierra Wireless MC8790 on RB912UAG-2hpnd

If you don't "see" the LTE interface, it probably means that the 3G modem is not powered. On the RB912, you have to choose between powering the USB external port or mini-PCIe slot. Go to system->routerboard->USB and switch to MiniPCIe or /system routerboard usb set type=mini-PCIe Hello no...
by dunga
Mon Mar 02, 2015 12:47 pm
Forum: Wireless Networking
Topic: Sierra Wireless MC8790 on RB912UAG-2hpnd
Replies: 22
Views: 9963

Re: Sierra Wireless MC8790 on RB912UAG-2hpnd

I have changed the SIM card for another operator (Orange) and changed antenna. Now i have a stable connection , but i'm stuck to "GSM Compact" Mode (and not 3G) and my bandwidth is very limited; around 40kbps. [admin@MikroTik] > /interface ppp-client export # jan/02/1970 00:57:04 by Route...
by dunga
Mon Mar 02, 2015 12:40 pm
Forum: General
Topic: RB912UAG-2HPnD- How to make use of the SIM for internet
Replies: 4
Views: 2313

RB912UAG-2HPnD- How to make use of the SIM for internet

Hello guys, I bought this RB912UAG-2HPnD so that I can make use of the SIM card to access the wireless simcard operators internet, because the area, i want to use it has low or limited connectivity. I want to use the SIMcard as my main connection while both the Lan and wlan will be used for hotspot ...
by dunga
Sat Jan 10, 2015 5:01 pm
Forum: Scripting
Topic: SCRIPT FOR FAILOVER BETWEEN 2 WAN LINKS
Replies: 7
Views: 5718

Re: SCRIPT FOR FAILOVER BETWEEN 2 WAN LINKS

Hello Guys, I have a similar situation just like others complained. I want to setup a failover/bonding (Fibre is my primary link while Vsat-dynamic ip) is my backup. My lan is hotspot. I want a complete setup that will enable me achieve such in no distant time, because the Vsat is running while we a...
by dunga
Mon Nov 03, 2014 2:52 pm
Forum: Beginner Basics
Topic: Bonding 2 WAN Connections
Replies: 13
Views: 65230

Re: Bonding 2 WAN Connections

Hello all,
what is the best way to setup a bonding or joining to or 3 isp together, so that they can route ot transmit thru one lan.
by dunga
Mon Sep 01, 2014 7:28 pm
Forum: Beginner Basics
Topic: SNTP Client Issues - Does not update
Replies: 18
Views: 12908

Re: SNTP Client Issues - Does not update

Hello all, I have been having this issue discuseed above when i connected to a new ISP. I discovered that all the places i installed mikrotik as hotspot, the time does not synch with ntp servers. Could it be that they blocked port 123 which ntp client uses. Is there any workaround incase, they refus...
by dunga
Mon Jun 23, 2014 5:48 pm
Forum: Beginner Basics
Topic: How does failover work?
Replies: 4
Views: 1760

Re: How does failover work?

I have failover setup 1st Gateway is PPPOE over bridged modem. 2nd Gateway is DHCP assigned Unplugging the power from the modem causes the failover to trigger to the second gateway and works as expected. When I plug the modem back in the mikrotik uses the primary gateway. If I remove the phone line...
by dunga
Thu May 29, 2014 2:50 pm
Forum: General
Topic: [solved] ROS 6.1 NTP client does not update system clock
Replies: 9
Views: 5248

Re: [solved] ROS 6.1 NTP client does not update system clock

Did you try to use other server?
Yes.

As you can see, the primary server is from south africa, while the secondary server i from US. Yet the ntp client is not synchronizing. Wen I ping the 2 ip they are replying.

What other way could i do for it to work.

Thanks
by dunga
Mon May 26, 2014 3:40 pm
Forum: The User Manager
Topic: Day/Night Bandwidth Configure in User Manager
Replies: 9
Views: 9341

Re: Day/Night Bandwidth Configure in User Manager

I'm using PPPoE with MkT User Manager and want to configure time based bandwidth (day/night). Here's what I did.... 1. Created a Profile 2. Added two limitation based on time a) 256k - 00:00:00 - 12:59:59 b) 512k - 13:00:00 - 23:59:59 3. Created an user and associated with above mentioned profile. ...
by dunga
Mon May 26, 2014 2:54 pm
Forum: General
Topic: [solved] ROS 6.1 NTP client does not update system clock
Replies: 9
Views: 5248

Re: [solved] ROS 6.1 NTP client does not update system clock

Still having the same issue of ntp not synchronizing with ntp server. I am using ROS 6.1Rc14, i wonder why it is not working /system [admin@MBJ] /system> ntp [admin@MBJ] /system ntp> client [admin@MBJ] /system ntp client> pr enabled: yes mode: unicast primary-ntp: 196.25.1.1 secondary-ntp: 205.196.1...
by dunga
Sat Jan 11, 2014 11:29 am
Forum: Beginner Basics
Topic: Change the date in " Mikrotik User Manager"
Replies: 4
Views: 2904

Re: Change the date in " Mikrotik User Manager"

grenzo To set clock or time in mikrotik, Thru winbox, click on system ------SNTP or NTP client, then click on enable and select unicast and put the ip aadrress of the ntp pool server og your choice. See attached picture ntp settings.JPG But before, try and go to this link http://www.pool.ntp.org/en/...
by dunga
Sat Dec 14, 2013 10:17 am
Forum: Beginner Basics
Topic: Using Mikrotik web proxy in hotspot setup
Replies: 7
Views: 8188

Re: Using Mikrotik web proxy in hotspot setup

Hello Fewi, You said add the rule before pre-hotspot chain, I dont understand you very well. how is it done Nice! That's a neat workaround. Using the pre-hotspot chain would be more reliable since that hooks directly into the provided customization, and the hotspot NAT rules are dynamic and may chan...
by dunga
Thu Nov 28, 2013 10:24 am
Forum: General
Topic: Web Proxy for small network
Replies: 36
Views: 13227

Re: Web Proxy for small network

@max open your winbox then drag & drop all package of 6.0 in you winbox file menu. then go to system >> upgrade >> upgrade package source >> click + sign >> router ip address >> admin >> password (router password) >> Apply. then you will reboot the system. i hope your system will upgrade automa...
by dunga
Wed Nov 27, 2013 4:13 pm
Forum: General
Topic: load balancing + hotspot + webproxy
Replies: 19
Views: 5725

Re: load balancing + hotspot + webproxy

Hello all, Can someone help me with this issue. I have hotspot on my Mikrotik, but it seems the network is getting slower irrespective of the people browsing the internet, it is just a cafe. The owner said he want me to enable web proxy in the mirotik as well. I want to ask if it is possible to have...
by dunga
Thu Nov 07, 2013 6:31 pm
Forum: RouterBOARD hardware
Topic: RB2011 freeze
Replies: 48
Views: 19227

Re: RB2011 freeze

It works for me. 5 days uptime since 6.4.
have you confirmed again that version 6.4 is stable on RB2011LS. Because i am having a serious issue on this rb2011 and that is causing alot of problem for me. or do u suggest i use ether6 as my wan link and leave ether1 alone on this issue. Thanks
by dunga
Thu Nov 07, 2013 4:40 pm
Forum: General
Topic: RB2011 Default Port Configuration (Master/Bridge)
Replies: 18
Views: 13184

Re: RB2011 Default Port Configuration (Master/Bridge)

hello all, I am interested in this topic, cus i have a bandwidth of 2meg down and 1meg up, but the fibre link is connecte thru the port1 on my RB2011LS. At times i notice that the link will stop and later pick up again. I dont understand what actually you guys are saying about the ports. Are u sayin...
by dunga
Thu Nov 07, 2013 3:30 pm
Forum: General
Topic: How to Block torrent 100%? Only 2 lines. It is solved.
Replies: 59
Views: 112339

Re: How to Block torrent 100%? Only 2 lines. It is solved.

Hello all,
Can i have the firewall rule to block the torent as you guys suggested. I want to implement it in my network
by dunga
Thu Oct 17, 2013 3:15 pm
Forum: The User Manager
Topic: Usermanager, Hotspot, shared users
Replies: 19
Views: 38981

Re: Usermanager, Hotspot, shared users

It was start to work when im manually enabled user 2 logins ... see in picture:
User Manager- Users_1330969483392.jpeg
This is the one that worked for me as well. I am using version router OS 5.26, i think MT team will work on it so that it will be intergrated fully witout going thru this steps.
by dunga
Wed Oct 16, 2013 6:26 pm
Forum: RouterBOARD hardware
Topic: PROBLEM WITH RB751U-2HnD CANNOT PASS TRAFFIC
Replies: 1
Views: 1142

PROBLEM WITH RB751U-2HnD CANNOT PASS TRAFFIC

hello all, I just got a new RB751U-2HnD, configured it and put it to site to run wireless hotspot for an office. But after the setup, i could ping any dns with good reply but i cannot open any website thru my browsers. I have cross checked all the ip, they are all ok witout any mistake, but i cannot...
by dunga
Fri Sep 13, 2013 2:57 pm
Forum: Beginner Basics
Topic: Working QoS configuration
Replies: 44
Views: 79774

Re: Working QoS configuration

Thanks Ngee, For your configurations. Plz my network is not like your own but differently. My setup is just like this. WAN ------> Lan(Bridged: port 2 - 10).-------->Switch -------(AP). My uplink is 1meg/download is 2meg. My clients are on hotspot just a user requires much speed, how do i about to u...
by dunga
Wed Sep 11, 2013 12:14 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD stopped working
Replies: 4
Views: 2036

Re: RB751U-2HnD stopped working

Had similar problem, but mine is that the lights does not come on wen it powers up, but with netinstall, it shows error as the led light will light and reboot, then the whole lights will flash again and the connected port will come on, repeatedly. This is the diagram of what i see when i tried using...
by dunga
Fri Aug 16, 2013 7:04 pm
Forum: The User Manager
Topic: how to generate and print report in user manager 5.x
Replies: 0
Views: 1448

how to generate and print report in user manager 5.x

hello all, please, i need help on how to generate report on user manager. I want to generate and print report of sales we made, i mean account and amount generated at the end of every month, in tabular form, just like other billing systems. This will help us know what we made during the month period...
by dunga
Fri Aug 16, 2013 6:55 pm
Forum: The User Manager
Topic: howto make HotSpot and User Manager on the same router
Replies: 3
Views: 7829

Re: howto make HotSpot and User Manager on the same router

hello, I think the best way to achieve it is to do as follows; in winbox, click on radius, click on hotspot add server ip as 127.0.0.1, shared secret: 123 (if using mt version 5.x) in your User manager router; Click on router add, name = hotspot, shared secret: 123 save. Just make sure, the same nam...
by dunga
Mon Jun 10, 2013 5:11 pm
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 54118

Re: Huawei usb 3g modems (used by vodafone)

hello, Actually, bthe usb dongle is still working, but i tried another version of ZTE MF 202/262, but this one shows on the USB interface, when /system/resources/usb. But did not see the ppout port showing in the interface. Even on the ports, it did not show. the version i am using is v5.23. Out of ...
by dunga
Tue May 21, 2013 3:12 pm
Forum: The User Manager
Topic: Users web page reset after time user manager time exhausted.
Replies: 0
Views: 1466

Users web page reset after time user manager time exhausted.

Hello all, I have setup a hotspot and it is working very fine, but recently a client brought to my notice that as soon as his time exhausted, all his opened websites will disappear (i.e the pages he opened will not display where he was when he log in again). I have users who comes and buy hourly tic...
by dunga
Tue May 21, 2013 2:40 pm
Forum: General
Topic: MT RB751U-2HD stops transmitting until after reboot
Replies: 5
Views: 4686

Re: MT RB751U-2HD stops transmitting until after reboot

Josh, It sounds to me like an arp issue or possibly a DHCP issue on the modem. You could check your ip arp table on the router under the working and not working condition. However if you put the modem in bridge mode I think you would bypass the issue all together. . How do i check the arp table on t...
by dunga
Tue May 21, 2013 10:43 am
Forum: General
Topic: MT RB751U-2HD stops transmitting until after reboot
Replies: 5
Views: 4686

Re: MT RB751U-2HD stops transmitting until after reboot

Thanks Josh, i response to your reply I would try putting the modem in bridge mode and running DHCP or pppoe or whatever the modem is doing directly on the router. If you cannot do that then figure out if the wired and wireless are both having the issue and also see if the router is loosing its ip c...
by dunga
Mon May 20, 2013 2:06 pm
Forum: General
Topic: MT RB751U-2HD stops transmitting until after reboot
Replies: 5
Views: 4686

MT RB751U-2HD stops transmitting until after reboot

Hello all, I am having some issues with my MT router. The network is connected in such a way that i get ip directly from the HX modem (HN9460). The MT gets dynamic ip from the HN modem. But after some time, the router will stop transmitting traffic and i cant open a browser, unless the router or the...
by dunga
Tue Feb 19, 2013 7:48 pm
Forum: RouterBOARD hardware
Topic: HELP ON SETTING UP natting on more than one interface
Replies: 1
Views: 1058

HELP ON SETTING UP natting on more than one interface

Hello friends, I am faced with a big problem. I want to setup an internet for users using RB751G-2HnD in this way. My Ether4+5 and wlan are bridge to use hotspot while ether2 will use static ip but on let say 192.168.20.1/24 range, while ether3 will be static ip with range of 172.168.20.1/24. My sou...
by dunga
Sat Feb 09, 2013 7:39 pm
Forum: Wireless Networking
Topic: Users Created in Hotspot starts counting from begining
Replies: 1
Views: 4511

Users Created in Hotspot starts counting from begining

Hello all, Please i am having serious issues with my rb751 with usb. I have configured hotspot and usermanager working very fine. All of a sudden i started noticing strange behaviour in my MT. If a user created in hotspot thru winbox is logged on, as soon as there is power outage on the MT, the time...
by dunga
Thu Jan 31, 2013 11:04 am
Forum: Wireless Networking
Topic: HOW TO SETUP VPN CLIENT ON MIKROTIK
Replies: 4
Views: 2971

Re: HOW TO SETUP VPN CLIENT ON MIKROTIK

Thanks ohara, Just look at the senario, the mikrotik router access the internet thru the #G usb dongle, but i want to use it as a vpn client so that the computers will connect and access so sites which cannot be accessed thru the 3g usb dongle. Hence, the router to be vpn client, so that i cant star...
by dunga
Wed Jan 30, 2013 5:19 pm
Forum: Wireless Networking
Topic: HOW TO SETUP VPN CLIENT ON MIKROTIK
Replies: 4
Views: 2971

HOW TO SETUP VPN CLIENT ON MIKROTIK

Hello all, I want to know how to setup vpn client in mikrotik. My connection uses 3G USB and i have setup the apn and other things needed and the dhcp is already running. How to i setup vpn on the mikrotik, so that my connected systems-pc will use the vpn to connect to internet thru the 3g usb. If i...
by dunga
Sat Dec 29, 2012 2:12 pm
Forum: Beginner Basics
Topic: HELP - HOW TO DOWNGRADE FROM 3.13 TO 2.9.51
Replies: 8
Views: 3198

Re: HELP - HOW TO DOWNGRADE FROM 3.13 TO 2.9.51

sorry to digrace, what if someone wants to upgrade rb112 from 3.10 to 3.30, i have uploaded the packages and did /system rebbot for it to upgrade it yet, i cant acess thr rb112 for over 30minutes.


thank
by dunga
Sat Dec 29, 2012 1:33 pm
Forum: Wireless Networking
Topic: isues with my rb112 not working normally
Replies: 1
Views: 1058

isues with my rb112 not working normally

hello all, please i have an issue wit my rb112, after upgrading the rb112 to ver 3.10 with all packages, the rb refused boot, when it does i cannot work on it very well. I want to uninstall some packages and leave only the wireless, system, routerboard, ups. it cant uninstall, even with winbox i hav...
by dunga
Mon Dec 17, 2012 8:06 pm
Forum: The User Manager
Topic: No login Page hotspot
Replies: 27
Views: 97212

Re: No login Page hotspot

Hello all, I am interested in this topic, i have a task to make our hotspot to display and users will have free trial account/login for 1week. I want a situation where when the login page appears, the user will just log in without any username and pasword. How do i go about it, and what file should ...
by dunga
Wed Sep 19, 2012 5:07 pm
Forum: General
Topic: Help My USB Device not detecting in RB751 with USB port
Replies: 0
Views: 1053

Help My USB Device not detecting in RB751 with USB port

Hello all, I have been using 3g dongle for my internet connection using my rb751G. I used it to do ppout for my office network, but all of sudden the 3g modem connected to the router does not come up again, that is it does not show again in /system resource/usb. Even in pppout, device is showing unk...
by dunga
Tue Jul 10, 2012 4:15 pm
Forum: General
Topic: Block Youtube website on RB750 but want to allow some IP
Replies: 11
Views: 6286

Re: Block Youtube website on RB750 but want to allow some IP

hello all,
how can someone limit the bandwidth usage of youtube. I dont want to block it but reduce the bandwidth it uses. I want to do it for all my lan conneted system. I m using hotspot and i want a firewall filter or queue that will enable me achieve such.
by dunga
Wed Jun 27, 2012 3:55 pm
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 54118

Re: Huawei usb 3g modems (used by vodafone)

hello,
thanks after disabling dial on demand, it seesm to have solve the problem, cus at times it connects, at times it does not connect.
by dunga
Wed Jun 27, 2012 3:48 pm
Forum: General
Topic: 3G Modem Stick recognize problem
Replies: 2
Views: 2021

Re: 3G Modem Stick recognize problem

Having the same issues,
I am having some issues regarding connecting with this modem, haier HSDPA data card. It will be seen in the /system resources, but could not be seen in the interface(ppp-out).

Is mikrotik not supporting this modem so that I can know what to do.

Thanks
by dunga
Wed Jun 27, 2012 3:44 pm
Forum: RouterBOARD hardware
Topic: RB751U-2HnD 3g
Replies: 5
Views: 5780

Re: RB751U-2HnD 3g

hello,
I am having some issues regarding connecting with this modem, haier HSDPA data card. It will be seen in the /system resources, but could not be seen in the interface(ppp-out).

Is mikrotik not supporting this modem so that I can know what to do.

Thanks
by dunga
Fri Jun 22, 2012 12:08 pm
Forum: The User Manager
Topic: limitations/uptime limit not working in user manager 5.x
Replies: 15
Views: 41872

Re: limitations/uptime limit not working in user manager 5.x

thanks,
will give it a trial and see how it works.
by dunga
Thu Jun 21, 2012 1:09 pm
Forum: The User Manager
Topic: How to set credit time limitations in user manger 5.14 ?
Replies: 1
Views: 2016

Re: How to set credit time limitations in user manger 5.14 ?

yes, you can set it. In your uptimelimit set the time you want to limit the user, like, 1hour = 1h, 1week = 1w etc. If you want it for like 2dys, st that in validity while creating profiles. Or just click on Profiles-Create New profile-----,put the name, of the prfile, eg 1hour, in validity=let this...
by dunga
Thu Jun 21, 2012 12:25 pm
Forum: The User Manager
Topic: Usermanager not disconnecting clients
Replies: 4
Views: 5034

Re: Usermanager not disconnecting clients

Hi I have a rb433 with a hotspot setup, running a radius server connected to UM on the same board. It works, users gain access to the internet, and it keeps track of the data each user uses. But it doesn't cut them off once they reach their limits(which are set up under limitations/profiles). Anyon...
by dunga
Thu Jun 21, 2012 12:15 pm
Forum: The User Manager
Topic: limitations/uptime limit not working in user manager 5.x
Replies: 15
Views: 41872

Re: limitations/uptime limit not working in user manager 5.x

Really I don't know what happen with your configuration, don't activate CoA in usermanager :-) thanks bambangs2komputer, this actually solved the problem, just disable coa port in user manager does the magic. i want to ask again, why is it only admin account/customer in usermanager works perfectly ...
by dunga
Mon May 28, 2012 2:03 pm
Forum: The User Manager
Topic: limitations/uptime limit not working in user manager 5.x
Replies: 15
Views: 41872

Re: limitations/uptime limit not working in user manager 5.x

Really I don't know what happen with your configuration, don't activate CoA in usermanager :-)
I love usermanager and work fine like my pict :-)
are you saying if disable coa in user manager, that uptime limit will work fine.

I will give it a try and get back to the forum.
by dunga
Wed May 23, 2012 11:55 am
Forum: The User Manager
Topic: limitations/uptime limit not working in user manager 5.x
Replies: 15
Views: 41872

Re: limitations/uptime limit not working in user manager 5.x

dunga try filling all fields at limitations, rate limits. When I apply rate limits, i think all fields are needed. Customers couldnt login if I didnt fill burst time for example. Regards, Thanos Let us not deviate from the main issue in question, what i am asking is that limitation/uptime limit is ...
by dunga
Mon May 14, 2012 11:52 am
Forum: The User Manager
Topic: limitations/uptime limit not working in user manager 5.x
Replies: 15
Views: 41872

Re: limitations/uptime limit not working in user manager 5.x

hello all,
after some days of detecting a fault in user manager 5.x, i am using 5.13, yet no response on the above.

What is happening to user manager package, are u guys trying to phase it off or wat, if no support for it then, l;et us know.
by dunga
Thu May 10, 2012 6:12 pm
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 54118

Re: Huawei usb 3g modems (used by vodafone)

hello, i am having some problems connecting my 3g usb modem with rb751g.

My modem is zte model mf 631 hdsp and after trying several times, it is not connecting even after putting the apn=providers.
ppout settings in winbox.jpg
Does mikrotik not support zte modems.
by dunga
Tue May 08, 2012 11:50 pm
Forum: The User Manager
Topic: limitations/uptime limit not working in user manager 5.x
Replies: 15
Views: 41872

Re: limitations/uptime limit not working in user manager 5.x

have mikrotik not done anything about this, it is really frustrating to us.

How can someone solve this problem as it is disturbing us.

Normis, fewi and other forum gurus have you guys no solutions to this problem
by dunga
Tue Apr 03, 2012 8:38 pm
Forum: The User Manager
Topic: Active sessions and Active users NOT refreshing.
Replies: 5
Views: 3559

Re: Active sessions and Active users NOT refreshing.

There is no generic best configurations for user manager. Configurations must be tailored to specific services/package offered by the ISP. We are using it to run a WISP where users connect to the network/Access point, then login page will display which then guarantees access to internet so far as h...
by dunga
Fri Mar 30, 2012 3:16 pm
Forum: Beginner Basics
Topic: Problem with user-manager 5.13 in RB1200
Replies: 0
Views: 3542

Problem with user-manager 5.13 in RB1200

Hello members, Please i am having some issues with our hotspot and usermanager 5.13 in rb1200, in the same box. Since i setup this unit, i have been having some issues concerning ranging from users not loggin in again after they logout, at times users will not login, which his limit should be like 1...
by dunga
Wed Mar 21, 2012 11:23 am
Forum: The User Manager
Topic: Active sessions and Active users NOT refreshing.
Replies: 5
Views: 3559

Re: Active sessions and Active users NOT refreshing.

please skilful,
can you help send to me the best configurations for user-manager 5.13 and hotspot in the same box, so that we may have a solid settings.

thanks.

You can Pm at, o.esiogu@rocketmail.com
by dunga
Wed Mar 21, 2012 11:20 am
Forum: The User Manager
Topic: UM 5.7 not showing active users
Replies: 4
Views: 3532

Re: UM 5.7 not showing active users

hello all, I am having the same peoblem as indicated above, but let us also look at the session time in winbox, as posted by nspotorno, it is not showing meaning somwthing is wrong b/w user-man and winbox. Another issue i have been encounteing is that assuming you create a 1hr time for a user, the u...
by dunga
Mon Feb 20, 2012 4:30 pm
Forum: Beginner Basics
Topic: Downgrade from v5.0rc7 to 4.17 on RB1100 fails
Replies: 5
Views: 2321

Re: Downgrade from v5.0rc7 to 4.17 on RB1100 fails

can still downgrade it to any lower version of rb 5.1 or 5.5, so that i can get the best from the box, cus right now it is not being used cus of that issue.

Thanks
by dunga
Fri Feb 17, 2012 2:37 pm
Forum: RouterBOARD hardware
Topic: How to downgrade RouterOS
Replies: 9
Views: 4313

Re: How to downgrade RouterOS

actually i tried downgrading but lost the routerboard 1200, but was able to recover it after using netisntall 5.13. yet I want to downgrade it, maybe later when this issue is reported by others, then i can switch over to the new user manager. My problem is that there is no documentation for the new ...
by dunga
Fri Feb 17, 2012 2:28 pm
Forum: RouterBOARD hardware
Topic: How to downgrade RouterOS
Replies: 9
Views: 4313

Re: How to downgrade RouterOS

Hello, I am having some issues with my current version of user-manager5.13. The uptime limit does not work when i create 1hour ticket for any user. hence, i want to downgrade my routerOS from 5.13 to 4.17 so that i can have the features of usermanager like that of version 3. How do i resolve and dow...
by dunga
Thu Feb 16, 2012 12:42 pm
Forum: Beginner Basics
Topic: Downgrade from v5.0rc7 to 4.17 on RB1100 fails
Replies: 5
Views: 2321

Re: Downgrade from v5.0rc7 to 4.17 on RB1100 fails

I need your urgent help right now, I was having some problems with user manager 5.13 concerning the issue of time limit, but i wanted to go back to user manager 4.17, but when i loaded all packages in the rb1200, and click on downgrade, i lost connection to the rb1200, what will i need to do to reco...
by dunga
Thu Feb 16, 2012 12:38 pm
Forum: General
Topic: 4.x to 3.30 downgrade problem
Replies: 7
Views: 2917

Re: 4.x to 3.30 downgrade problem

hello,
i just downgraded my rb1200 from 5.13 down to 4.17, but i lost connection to the rb1200, what will i do to rectify it.

Thanks
by dunga
Thu Feb 16, 2012 12:30 pm
Forum: The User Manager
Topic: limitations/uptime limit not working in user manager 5.x
Replies: 15
Views: 41872

limitations/uptime limit not working in user manager 5.x

Hello all, please i am having an issue concerning the uptime limit on any account created in user manager 5.6 and 5.13. If I create a profile and give limitation to stop at say 30mins, the user will still be online unlimited, meaning the limitations is not followed, why. Let me explain more, i creat...
by dunga
Thu Dec 29, 2011 7:36 pm
Forum: General
Topic: Hotspot page template
Replies: 23
Views: 21025

Re: Hotspot page template

Hello all, Can someone just upload his login page template, i need to build and create from there. I am faced with a task of modifying the login page to suite the firms product and services with picture, i need some that has a banckground picture. Thanks your help will be appreciated. Fewi, you can ...
by dunga
Mon Dec 12, 2011 8:06 pm
Forum: The User Manager
Topic: Install 5.6 userman
Replies: 21
Views: 10579

Re: Install 5.6 userman

hello, If you have configured it like this in the terminal/console, them check if you have it this way. You can just copy and paste in the terminal, but change the ones in open quotes like "mylogin" / tool user-manager customer add login="mylogin" password="password" pe...
by dunga
Fri Dec 09, 2011 7:59 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 268
Views: 94858

Re: User Manager v4.0 test package

Please any documentation for user-manager test package or newer versions of user-manager, i don't know why the documentations stopped in version 3 or 4, and for test package nothing like that. Please help as somoen wants to go to jail if he fails to implement it. Then how can someone create a time b...
by dunga
Fri Dec 09, 2011 7:42 pm
Forum: Beginner Basics
Topic: Mikrotik as bandwidth manager
Replies: 3
Views: 2802

Re: Mikrotik as bandwidth manager

fewi, the above question is very important so that we can have the setup as i want the same setup where you can share a bandwdith for some people in the same pool, so that whe they login, they will all assign to the same pool. Will hotspot solve such situation, if yes how do someone go about it. Tha...
by dunga
Fri Dec 09, 2011 7:38 pm
Forum: The User Manager
Topic: Can Mikrotik display currently active users in user manager
Replies: 5
Views: 4800

Can Mikrotik display currently active users in user manager

Hello all, I want to find out if it is possible for Mikrotik to display currently active users in hotspot in the user manager interface. Assuming a user just logged in, can it be displayed in user manager the minutes/time currently in use, the bandwidth in use and others, just as it is displayed in ...
by dunga
Fri Dec 09, 2011 7:30 pm
Forum: General
Topic: "RADIUS server is not responding" on hotspot config
Replies: 6
Views: 12971

Re: "RADIUS server is not responding" on hotspot config

hello, may be you are not geting things right. are both hotspot and user-manager in the same router? If yes then your client still has an ip address on it. Try check your windows system for any ip inside it. again, did u enable dhcp server for the hotspot client cus at times it happnes when the clie...
by dunga
Wed Nov 23, 2011 11:50 am
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 102041

Re: RouterOS v5.8 released

What should be the effect of it concerning the two devices that are running point to point in bridge mode with wds. I see this error in my log, will it help reduce it or what improvement will it have on the link and what is the time duration. obinna@OFFICE] /log> pr jan/01 02:00:02 system,error,crit...
by dunga
Wed Nov 23, 2011 11:40 am
Forum: General
Topic: RouterOS v5.8 released
Replies: 182
Views: 102041

Re: RouterOS v5.8 released

[obinna@OFFICE] /system> routerboard [obinna@OFFICE] /system routerboard> pr routerboard: yes model: 433AH serial-number: 199701F4CD9A current-firmware: 2.18 upgrade-firmware: 2.29 [obinna@OFFICE] /system routerboard> How do i upgrade this firmware as i cannot see the link to download the firmware. ...
by dunga
Tue Nov 22, 2011 2:23 pm
Forum: General
Topic: How to block specific port for range of IP Addresses?
Replies: 27
Views: 40562

Re: How to block specific port for range of IP Addresses?

hello, I still want to find out how to block a specific port for a particular ip address using mikrotik. What I want to do is to block this ip from browsing the internet but can only chat. The Ip address is 192.168.0.201 only. I have set put it in the address list and enabled a filter rule o it like...
by dunga
Tue Nov 22, 2011 11:00 am
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 369
Views: 357991

Re: Sample Hotspot Page - Sticky Please

Hello all, I like all these people login pages, twana222, virus, pablo0582, spice_prash your is very nice, how and where did you placed all the pictures to make them cover the entire page. I mean the size, position of them in your login.html. risipetillo, chimaster, SNWiFi, risipetillo, car1cow, dio...
by dunga
Thu Nov 17, 2011 1:21 pm
Forum: General
Topic: How to block specific port for range of IP Addresses?
Replies: 27
Views: 40562

Re: How to block specific port for range of IP Addresses?

Hello,
I still ask how do someone create address-list without adding them one by one, Just as in having a host file in windows which is used to block some sites in each system.

Can someone create such a file and direct mikrotik to read from the file incase of both blocked or unblocked.

Thanks
by dunga
Mon Nov 14, 2011 10:36 am
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 369
Views: 357991

Re: Sample Hotspot Page - Sticky Please

after reading this topic for months and getting ideas i came to my final login page :) Picture-1.jpg I have changed the status html the same as login/logout page (same content) Picture 3.png And finally a login page for iPhones IMG_0976[1].PNG :D Please, I want the login.html of this login page, so...
by dunga
Mon Nov 14, 2011 10:25 am
Forum: Beginner Basics
Topic: HELP WITH NTP SETTINGS FOR MY RB433AH
Replies: 3
Views: 1585

HELP WITH NTP SETTINGS FOR MY RB433AH

hello all, I am facing an issues with my RB433AH that I am using as a Point to Point for a distance of about 5km. I want to enable the two radio to autoreboot at a specified time in the day. But the problem i am having is that anytime i reboot the RB it goes to its default time and date of Jan/02/19...
by dunga
Thu Nov 10, 2011 2:21 pm
Forum: Beginner Basics
Topic: how to block website
Replies: 12
Views: 37897

Re: how to block website

Thanks,
As sson as i get it will try to implement it
by dunga
Thu Nov 10, 2011 10:35 am
Forum: Beginner Basics
Topic: how to block website
Replies: 12
Views: 37897

Re: how to block website

please dont try such sits here, they will not open Thanks fewi for your response, are u saying that if i just put this string "please dont try such sites here, they will not open. Thanks" in the redirect-to , it will display it as I put it there. I need at least a best option to achieve t...
by dunga
Tue Nov 08, 2011 8:37 pm
Forum: Beginner Basics
Topic: how to block website
Replies: 12
Views: 37897

Re: how to block website

After blocking the porn, sex sites in web proxy as indicated, i want a situation where anyone dat visits the forbidden site or blocked sites, it will display a custom message to the person. ERROR: Forbidden While trying to retrieve the URL http://www.google.com/search?q=xxx&ie=utf-8&oe=utf-8...
by dunga
Mon Nov 07, 2011 1:27 pm
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 54118

Re: Huawei usb 3g modems (used by vodafone)

hello,
i need detail configuration of usb modem in mikrotik so that i can test the setting and use it for my backup. how do i set the usb to pick up automatically when my main link goes off, and wen it comes up the usb modem disconnects.

thanks
by dunga
Thu Nov 03, 2011 2:44 pm
Forum: General
Topic: Ad Blocking hosts file
Replies: 34
Views: 34738

Re: Ad Blocking hosts file

you can set the DNS rule for specific IP address only so that peoples cant change their DNS if they change their own then there will be no internet you can set mikrotik to send request only to specific IP address on which DNS is running so users are binded to your DNS server only and have enjoyed. ...
by dunga
Wed Nov 02, 2011 3:37 pm
Forum: General
Topic: Ad Blocking hosts file
Replies: 34
Views: 34738

Re: Ad Blocking hosts file

how is this possible to block advert or adbanner in mikrotik, s tht some adverts on websites will not show when opened. There is this software adzapp which works in linux. how do we implement this cus these sites consume bandwidths like hell. Is there a sway again how to reduce the consumption of ba...
by dunga
Wed Nov 02, 2011 3:23 pm
Forum: General
Topic: Routerboard as a modem
Replies: 13
Views: 2720

Re: Routerboard as a modem

i have the same settings i need hw to make the computers in my ether1 to access the internet using the usb modem.

thanks
by dunga
Tue Nov 01, 2011 10:41 am
Forum: Beginner Basics
Topic: Mikrotik Bandwidth Control Problem‏
Replies: 24
Views: 5479

Re: Mikrotik Bandwidth Control Problem‏

hello, i have a similar problem, where i shaped some ip on the network but it seems they are not working well. I want to find out, how do i block other ip addresses in the network that are not being shaped not to access the internet, cus there is one user who is always changing his assigned ip addre...
by dunga
Sat Oct 08, 2011 4:42 pm
Forum: Wireless Networking
Topic: Problem with p2p 55 KM
Replies: 17
Views: 2839

Re: Problem with p2p 55 KM

thanks,
i have gone thru the link, but a bit confused. Will i need to disable the wds i created in the both radio. What happens to the ether1 interface,no mention was made about it. The bridge interface has an ip address what interface will now take the ip address.

Thanks
by dunga
Thu Oct 06, 2011 12:25 am
Forum: General
Topic: Bandwidth Monitoring Per Ip / Per Subnet
Replies: 8
Views: 13814

Re: Bandwidth Monitoring Per Ip / Per Subnet

thanks mwarren77,
I will implement it and give you feedback on the issue while the stuff is in use.

Thanks
by dunga
Wed Oct 05, 2011 1:15 am
Forum: The User Manager
Topic: time limit based
Replies: 10
Views: 18170

Re: time limit based

I don't know if you have solved tis isue but here is a suggestion Thanks for the reply. I have been doing what you have suggested, but the user uptime sometimes goes past the expiry limit which has been entered. You have to take time and check your credit you created in user manager. That is where t...
by dunga
Wed Oct 05, 2011 1:03 am
Forum: General
Topic: Traffic shaper
Replies: 17
Views: 6197

Re: Traffic shaper

Hello
Tried to read the wiki but did not ghrab it well.

can u redefine and explain more on the settings both for the uplink and downlink so that we can understand it. I know it will not be easy but for learning sake.

Thanks
by dunga
Wed Oct 05, 2011 1:00 am
Forum: Wireless Networking
Topic: best advice for this wireless link (point to point link)
Replies: 3
Views: 1674

Re: best advice for this wireless link (point to point link)

Hello, At first change "Country" to e.g. Germany, than Apply. Did change the country yet no changes Do "Freq. usage"... Check on You antenna for what frequency range is made, 5100 - 5800? 5400-5800? Frequecy = 5100 - 5800 Update software to at least v4.17... Software updated to ...
by dunga
Wed Oct 05, 2011 12:53 am
Forum: General
Topic: Bandwidth Monitoring Per Ip / Per Subnet
Replies: 8
Views: 13814

Re: Bandwidth Monitoring Per Ip / Per Subnet

You do one simple queue per IP. This will set the end users target speed to be the speed you set in the queue setup. With this setup you can view the total usage by clicking the stats tab and configure your graphing (tools/graphing/queue graphs) to view the history of the end user usage. ? How do y...
by dunga
Wed Oct 05, 2011 12:23 am
Forum: General
Topic: Bandwidth Monitoring Per Ip / Per Subnet
Replies: 8
Views: 13814

Re: Bandwidth Monitoring Per Ip / Per Subnet

Thanks mwarren77,
That setup you suggested if for the whole subnet or address range. I want the queue to be per ip, in such a way that easy ip gets such allocated bandwidth.

Thanks.

But I need a detail setup with explanations
by dunga
Tue Oct 04, 2011 10:20 pm
Forum: General
Topic: Bandwidth Monitoring Per Ip / Per Subnet
Replies: 8
Views: 13814

Re: Bandwidth Monitoring Per Ip / Per Subnet

Hello all, I need to have this setup for my lan users. I have MT server with 3 ether interface. Ether1 is for my isp which they gave me 2mb/2mb. Lan users (ether3) with static ip range of 192.168.30.1 and hotspot in ether2 with dhcp. I want a way to allocate bandwdith to each ip in ther ether3 subne...
by dunga
Mon Oct 03, 2011 5:29 pm
Forum: General
Topic: Hotspot page template
Replies: 23
Views: 21025

Re: Hotspot page template

any better login templete you can send it to my email plz, my email is obinna4god@yahoo.com.
by dunga
Mon Oct 03, 2011 5:15 pm
Forum: Wireless Networking
Topic: best advice for this wireless link (point to point link)
Replies: 3
Views: 1674

best advice for this wireless link (point to point link)

hello all, I just established a point to point link with 2 mikrotik radio (rb411) both, one as bridge and the other one as wds. What i get as my signal strenght is -76/78, in 5ghz. When i ping, i get response of 1ms. Is there a way i can do any thing to improve the speed? What benefit do i have if i...
by dunga
Mon Oct 03, 2011 5:07 pm
Forum: Wireless Networking
Topic: Problem with p2p 55 KM
Replies: 17
Views: 2839

Re: Problem with p2p 55 KM

Thanks, The link you sent to me is for configuration with 2 wlan interface, but what i have is just ether1 and wlan1. How do i go about it. again just look at this link and give me your suggestions and advice. I establishe3d this link, on point - point connection. When i do bandwdith test, see the r...
by dunga
Sat Oct 01, 2011 9:31 am
Forum: Wireless Networking
Topic: Problem with p2p 55 KM
Replies: 17
Views: 2839

Re: Problem with p2p 55 KM

I have seen my pigtail will not mtach that of xr5 as you suggested.

I need a detailed way to configure nstreme dual slave using an rb411 with 1 wlan and ether interface between router a and router b
by dunga
Sat Oct 01, 2011 1:52 am
Forum: Wireless Networking
Topic: Problem with p2p 55 KM
Replies: 17
Views: 2839

Re: Problem with p2p 55 KM


Can i ask u , which Mini Pci u used??
and how many Km between tow link?
and i see u can change the channel i'm sure its will be better
I am using Mini PCI - 350mwatts
distance for the link = 5-7km

Did that give u any idea?
by dunga
Sat Oct 01, 2011 12:40 am
Forum: Wireless Networking
Topic: Problem with p2p 55 KM
Replies: 17
Views: 2839

Re: Problem with p2p 55 KM

Hello all, please, i want to ask question based on this two radio, is this link good to transfer or transmit about 4mbps of bandwidth. See the connections below; client pont to point.JPG client ping response.JPG If not good, what will i do to achieve a better signal strength to improve the link. Thi...
by dunga
Fri Sep 30, 2011 1:25 am
Forum: Wireless Networking
Topic: Problem with p2p 55 KM
Replies: 17
Views: 2839

Re: Problem with p2p 55 KM

I am happy about this topic. Based on this statement, Try nstreme. My 37km link works much better with nstreme on v3.30. v5 doesn't seem to automatically configure ack for long links as well as 3.30 in my experience. I would enable nstreme and see what happens. and this Thanks Guys its seem so good ...
by dunga
Tue Sep 20, 2011 2:42 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 369
Views: 357991

Re: Sample Hotspot Page - Sticky Please

Hello Fewi,
What I mean by the code is the login.htm so that i can see the settings and how the pictures are placed in the login page.

I know the picture holder has size and other things involved in the login.htm file. That is what i am requesting.

Thanks

Obinna
by dunga
Mon Sep 19, 2011 11:43 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 369
Views: 357991

Re: Sample Hotspot Page - Sticky Please

Can someone please help me out how do you guys do this transparency effect with glowing borders & how do you control the level of transparency in there.. i`ll really appreciate that if you tell this in detail.. thanks in Advance. . can the creator of these login page send to us the code so that...
by dunga
Sun Sep 18, 2011 5:27 pm
Forum: Beginner Basics
Topic: HOW TO USE MT TO RUN A HIGH POWER WISP
Replies: 5
Views: 2746

Re: HOW TO USE MT TO RUN A HIGH POWER WISP

Thanks,
This did not explain in details what i want. I want a detailed setup
by dunga
Sun Sep 18, 2011 10:08 am
Forum: Beginner Basics
Topic: HOW TO USE MT TO RUN A HIGH POWER WISP
Replies: 5
Views: 2746

HOW TO USE MT TO RUN A HIGH POWER WISP

hello all, I am faced with the option to setup a wireless ISP with Mikrotik router board 433. This is what they want. 1. To use the Mikrotik to assign a bandwidth to each ip address on the wireless (assigning I assign the wlan ip address range of 172.16.10.1/24 range, so that if i give a client say,...
by dunga
Sun Sep 18, 2011 1:41 am
Forum: The User Manager
Topic: USER MANAGER VERSION 5.X SETUP GUIDE
Replies: 6
Views: 3696

Re: USER MANAGER VERSION 5.X SETUP GUIDE

Thanks for your help and assistance on this tediuos task i am faced.

Will give it a try and will let you know the outcome.
by dunga
Thu Sep 15, 2011 12:05 am
Forum: The User Manager
Topic: USER MANAGER VERSION 5.X SETUP GUIDE
Replies: 6
Views: 3696

Re: USER MANAGER VERSION 5.X SETUP GUIDE

Thanks,
that is not what i actually wanted to achieve. What i want is to print batch of users with the new user manager. A guide will be appreciated.

Thanks
by dunga
Wed Sep 14, 2011 1:43 am
Forum: The User Manager
Topic: USER MANAGER VERSION 5.X SETUP GUIDE
Replies: 6
Views: 3696

Re: USER MANAGER VERSION 5.X SETUP GUIDE

hello aacable,
thanks for the infor, you saved me some stress. How do someone print batch of users and see them, just like old user manager, it will take you to cvs file, but this one does not show such, how do some one create and print batch of users.

Thanks
by dunga
Mon Sep 12, 2011 10:17 pm
Forum: The User Manager
Topic: USER MANAGER VERSION 5.X SETUP GUIDE
Replies: 6
Views: 3696

USER MANAGER VERSION 5.X SETUP GUIDE

hello all, I am have been searching for the new user manager configurations settings, but no avail. How can a new user/newbie work on the new user-manager to get the new features in it. The documentations have nothing to show for it. How can a new user create profiles, limitations, and assign time t...
by dunga
Mon Sep 12, 2011 10:08 pm
Forum: The User Manager
Topic: Install 5.6 userman
Replies: 21
Views: 10579

Re: Install 5.6 userman

To install or upload user-manager in the router, you can use this software to upload the file without any problem, http://winscp.net/eng/index.php. Download and install, then login to the router with the ip address of the router, the username and password, then the rest is history. See the diagram b...
by dunga
Mon Aug 01, 2011 5:32 pm
Forum: General
Topic: HOTSPOT STOPPED WORKING AFTER CHANGING CARD FROM R52 TO R52H
Replies: 3
Views: 1754

Re: HOTSPOT STOPPED WORKING AFTER CHANGING CARD FROM R52 TO

hello all, Thanks for your contributions. Following the suggestions from serji that i should create another user using winbox. The user connected and browsed without any problem. I went to usermanager and discovered that the rate limits for that users was very low and that made it not to browse the ...
by dunga
Sat Jul 23, 2011 8:57 pm
Forum: General
Topic: HOTSPOT STOPPED WORKING AFTER CHANGING CARD FROM R52 TO R52H
Replies: 3
Views: 1754

HOTSPOT STOPPED WORKING AFTER CHANGING CARD FROM R52 TO R52H

Hello all, I have been having this issue with my hotspot. I have setup hotspot RB433ah with R52 wlan card and it was working well. But after I changed the card to R52Hn, the hotspot stopped working. If I disable the hotspot, i can browse from the wlan without any problem, but as soon as I enable hot...
by dunga
Sun May 15, 2011 1:19 pm
Forum: The User Manager
Topic: Mikrotik New User Manager Not working in Profile Timing ?
Replies: 4
Views: 2392

Re: Mikrotik New User Manager Not working in Profile Timing

You should CoA for the profiles, which have different limitation in different time. There should be 'radius-incoming' enabled in HotSpot, and for User Manager menu you have to configure the particular router to support CoA. Can U explain what you mean on the above cus i have tried them, yet it cann...
by dunga
Wed Apr 20, 2011 4:05 pm
Forum: The User Manager
Topic: User Manager log out Problems
Replies: 18
Views: 11951

Re: User Manager log out Problems

hello mikrotik support team, As you can see we have similar problems on the above issue, when is this going to be solved so that we can still make use of user manager as it has proved to be the best amongst all. please we need solution/suggestions as soon as possible before life is lost on this issu...
by dunga
Wed Apr 20, 2011 1:09 pm
Forum: The User Manager
Topic: time limit based
Replies: 10
Views: 18170

Re: time limit based

Hello winagain,
I suggest you paste your hotspot configuration here, so that we can view it and iron out where the problem might be from.

/ip hotspot/export
by dunga
Wed Apr 20, 2011 1:04 pm
Forum: The User Manager
Topic: MikroTik User Manager documentation
Replies: 51
Views: 87697

Re: MikroTik User Manager documentation

Documentation for 4 test package (Profiles/Limitations) is removed.
Still in need of the documentation for the test package.

Mikrotik team, please do something urgent about this as i want to make of the new features that are in the test package.

Thanks
by dunga
Wed Apr 20, 2011 12:19 pm
Forum: The User Manager
Topic: time limit based
Replies: 10
Views: 18170

Re: time limit based

hello, i think the solution as suggested in this forum elsewhere implies that you have to follow it this way. Assuming, you want to create 1hr time limit for a user in user-manager. Note the following: In credit, create 1hr as the name, time put 2d, since you want the 1hr to last or expire after 2da...
by dunga
Wed Apr 06, 2011 6:09 pm
Forum: The User Manager
Topic: User Manager and Hotspot on the same machine
Replies: 6
Views: 4206

Re: User Manager and Hotspot on the same machine

hello, for you to use user manager and hoptspot on the same box, u have to create the first user, since you want to log into user manager interface, you have to log in with the 1st user you created in hotspot. Assuming you want to login to user manager interface, http://192.168.20.1/userman The hots...
by dunga
Wed Apr 06, 2011 5:52 pm
Forum: The User Manager
Topic: How to make PPPOE and User Manager on the same router
Replies: 7
Views: 4395

Re: How to make PPPOE and User Manager on the same router

Hello, you can set both user manager and ppp on the same router without any problem. Please follow this link, it will help you http://wiki.mikrotik.com/wiki/User_Manager/PPP_Example Then for hotspot and user manager in the same box, plz use this link http://wiki.mikrotik.com/wiki/User_Manager/Hotspo...
by dunga
Mon Mar 28, 2011 2:33 am
Forum: The User Manager
Topic: User Manager log out Problems
Replies: 18
Views: 11951

Re: User Manager log out Problems

having the same problem for over many years now, i'm using version 4.17. tried both uptime and credit stuff did not solve the problem.

please mikrotik do look into it cus ur software has been helpful over the years.

thanks
by dunga
Thu Mar 24, 2011 3:32 pm
Forum: The User Manager
Topic: time limit based
Replies: 10
Views: 18170

Re: time limit based

hello all, I have been having this issues for a long time now about users credit limit and no answer has been given on it. Let me redefine the question the 1st user asked. I created 1hr credit for some users, and in the uptime limit, i specified 2days. here are the problems i am facing: 1. A user wh...
by dunga
Wed Feb 09, 2011 12:05 pm
Forum: The User Manager
Topic: MikroTik User Manager documentation
Replies: 51
Views: 87697

Re: MikroTik User Manager documentation

This has old documentations, what of the documentations for user manager test package 4.x
by dunga
Wed Feb 09, 2011 11:53 am
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 268
Views: 94858

Re: User Manager v4.0 test package

hello Normis,
I need a detailed documentations on user-man test package, as the features outlined are too hard to figure out and implement. I need a documentation so that it can guide people very well, as i need mostly to implement different seesions for day and night for some users.

thanks
by dunga
Fri Jan 28, 2011 2:39 pm
Forum: General
Topic: Setting up a wirless internet conection between 2 points
Replies: 1
Views: 1251

Re: Setting up a wirless internet conection between 2 points

hello Use this link it will guide you http://www.mikrotik.com/testdocs/ros/2.9/interface/wireless.php or Follow these steps Step 1 Click on new terminal, type “system reset” at the prompt. It will ask you if you are sure. Type “y”. Step 2 Once the board has been set to default settings and is booted...
by dunga
Fri Jan 28, 2011 2:13 pm
Forum: General
Topic: YAHOO CHAT STILL WORKING AFTER HOTSPOT LOGOUT
Replies: 5
Views: 1698

Re: YAHOO CHAT STILL WORKING AFTER HOTSPOT LOGOUT

How can this be stopped as it is making things difficult for us.I need it to be stopped.

Thanks
by dunga
Wed Jan 26, 2011 12:13 pm
Forum: General
Topic: YAHOO CHAT STILL WORKING AFTER HOTSPOT LOGOUT
Replies: 5
Views: 1698

YAHOO CHAT STILL WORKING AFTER HOTSPOT LOGOUT

Hello All, I have witnessed some issues in my MT.I am using it as a Hotspot for my wireless and wired connections. When someone login to hotspot and the time exhausted, he cannot open any web site again but cant still chat. I want to know why such is happening and why must it be so. I want a situati...
by dunga
Tue Jun 22, 2010 8:15 pm
Forum: The User Manager
Topic: USER MANAGER UPGRADED: DID NOT SEE NEW FEAURES
Replies: 2
Views: 1428

USER MANAGER UPGRADED: DID NOT SEE NEW FEAURES

Hello, I am having some problems here. I just upgraded my RB600 ppc to the latest version of Router OS 4.10, with the hope of getting the new features seen in user manager, but i was disappointed. After upgrading, what i saw is still the usual old user manager interface as it was in version 3.x. use...
by dunga
Tue Jun 22, 2010 5:14 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 268
Views: 94858

Re: User Manager v4.0 test package

Hello, I have been reading all the stuff on user manager, but i just upgraded a new router board, 433 to ros 4.10. But I did not see all the features you guys outlined in the user manager. What happned and how do i get the new features included in user manager since 4.0 and above. I need this featur...
by dunga
Tue Jun 22, 2010 3:22 pm
Forum: The User Manager
Topic: RB450 Disk Full - User-Manager Logs and Session
Replies: 15
Views: 63252

Re: RB450 Disk Full - User-Manager Logs and Session

i have similar problem, how to clear logs and sessions in user manager all at once.

i tried the step suggested by issuing this command
/tool user-manager log remove
but when i type the id number for the log, it shows invalid item number.

what number should be typed there.
by dunga
Wed Apr 14, 2010 9:31 pm
Forum: Wireless Networking
Topic: HELP WITH WIRELESS REPEATER
Replies: 1
Views: 1077

HELP WITH WIRELESS REPEATER

Hello all, I have a problem i want to setup a repeater station to extend my wireless link to some areas. I have a hotspot+user manager running in a system which i used for my wireless clients. which is the MT (Hotspot+UM) -------AP. All clients are connected to the AP working very fine. But I want t...
by dunga
Thu Apr 01, 2010 6:02 pm
Forum: General
Topic: HOW TO USE MIKROTIK RADIO AS CPE
Replies: 8
Views: 2318

Re: HOW TO USE MIKROTIK RADIO AS CPE

Thanks changeip,
Will try it on next configurations though i have made the MT to act as a client and a router at the same time.

Thanks
by dunga
Wed Mar 31, 2010 9:12 pm
Forum: General
Topic: HOW TO USE MIKROTIK RADIO AS CPE
Replies: 8
Views: 2318

Re: HOW TO USE MIKROTIK RADIO AS CPE

Hello all, I have been trying to use a mikrotik radio as a CPE so that after connecting to the base radio, it will get ip direct from the base, that i can access the internet directly. Find the attached pictures of what i did yet the computer could not browse. connected.JPG interface.JPG bridged et...
by dunga
Wed Mar 31, 2010 7:17 pm
Forum: General
Topic: HOW TO USE MIKROTIK RADIO AS CPE
Replies: 8
Views: 2318

Re: HOW TO USE MIKROTIK RADIO AS CPE

All i want to know is that, it is not possible unless you have to make the cpe to act as a router which i know how to do it very well, but i was thinking that if i brigde the two interface, it will work where the connected computeer will acquire ip address and browse. But in the other area, i think ...
by dunga
Wed Mar 31, 2010 10:07 am
Forum: General
Topic: HOW TO USE MIKROTIK RADIO AS CPE
Replies: 8
Views: 2318

Re: HOW TO USE MIKROTIK RADIO AS CPE

I am using station mode.
by dunga
Tue Mar 30, 2010 7:44 pm
Forum: General
Topic: HOW TO USE MIKROTIK RADIO AS CPE
Replies: 8
Views: 2318

HOW TO USE MIKROTIK RADIO AS CPE

Hello all, I have been trying to use a mikrotik radio as a CPE so that after connecting to the base radio, it will get ip direct from the base, that i can access the internet directly. What i want to say is that, just like other CPE, as sson as they connects, the ip goes to the computer connected to...
by dunga
Mon Mar 15, 2010 10:20 am
Forum: The User Manager
Topic: USER MANAGER RATE LIMIT
Replies: 9
Views: 22402

Re: USER MANAGER RATE LIMIT

i need you to help me set up queue for hotspot users. i have a client who claims to be using 1pc but i later discovered dat he has about 6pcs in his office all connected to internet. i want to setup a limit for him at least create d queue so dat i can limit him alone. again assuming i am having 256k...
by dunga
Sat Feb 13, 2010 7:59 pm
Forum: General
Topic: SOMEONE TRYING TO HACK MY BOX
Replies: 16
Views: 8490

Re: SOMEONE TRYING TO HACK MY BOX

also - do you really need an access from the outside? =)
yes for the answer.
by dunga
Fri Feb 12, 2010 7:46 pm
Forum: General
Topic: SOMEONE TRYING TO HACK MY BOX
Replies: 16
Views: 8490

Re: SOMEONE TRYING TO HACK MY BOX

Sorry about my previous response, i am still noticing some different ip address trying to hack my MT again. feb/12/2010 10:22:32 system,error,critical login failure for user root from 77.6 8.56.181 via ssh feb/12/2010 10:22:38 system,error,critical login failure for user root from 77.6 8.56.181 via ...
by dunga
Wed Feb 10, 2010 4:36 pm
Forum: The User Manager
Topic: User Manager v4.0 test package
Replies: 268
Views: 94858

Re: User Manager v4.0 test package

Can someone just upgrade only the user manager without upgrading other packages. Cus i want to test all the new features of the User manager alone b4 tyring it out. If yes, will i still have all the users intact and what if i want to go back to the former one, will it be possible? thansk and hoping ...
by dunga
Wed Feb 10, 2010 4:27 pm
Forum: General
Topic: SOMEONE TRYING TO HACK MY BOX
Replies: 16
Views: 8490

Re: SOMEONE TRYING TO HACK MY BOX

Thanks all, it worked like a charm, after chkecking my MT box, i did not see those ip addresses again meaning they are just blocked from accessing the router.

Many thanks to all that responded to this urgent problem i had.
by dunga
Tue Feb 09, 2010 8:25 pm
Forum: General
Topic: SOMEONE TRYING TO HACK MY BOX
Replies: 16
Views: 8490

Re: SOMEONE TRYING TO HACK MY BOX

Thanks fewi for the explanations I am confused more on what roadraces said, how do i make the rukle or add the rule as quoted below. Accept new connections on 22 at a rate of 2/minute, then make the next rule add the source to an address list for 1 hour that is blocked before accepting established/r...
by dunga
Mon Feb 08, 2010 8:58 pm
Forum: General
Topic: SOMEONE TRYING TO HACK MY BOX
Replies: 16
Views: 8490

Re: SOMEONE TRYING TO HACK MY BOX

Thanks,
The link has two firewall rules, will i choose one or implement both of them.

Thanks for your timely intervention
by dunga
Mon Feb 08, 2010 3:48 pm
Forum: General
Topic: SOMEONE TRYING TO HACK MY BOX
Replies: 16
Views: 8490

SOMEONE TRYING TO HACK MY BOX

Hello, I have been seeing this user trying with many username trying to hack into my MT router. I want to know how to block this user and others because i cannot ascertain if the hack actiually gained access or not. Here is what i see when i open a new terminal in my MT box. feb/08/2010 13:37:21 sys...
by dunga
Thu Feb 04, 2010 9:28 pm
Forum: General
Topic: Periodic username on hotspot
Replies: 21
Views: 10177

Re: Periodic username on hotspot

Fewi, You are extremely powerful as far as Miktotik is concerned. Will it be possible to have ur private mail add so dat i can PM you incase i run into some configurations issues. How can i assign a server/mirotik that hass about 3 cafes, using about 10pcs each to share this bandwidth 98kbps/196kbps...
by dunga
Thu Feb 04, 2010 9:19 pm
Forum: Wireless Networking
Topic: AP ACCESS RULE CONFIGURATION
Replies: 3
Views: 4117

Re: AP ACCESS RULE CONFIGURATION

i am interested on this topic. plz what are the settings to do it in mikrotik
by dunga
Thu Jan 07, 2010 9:46 pm
Forum: RouterBOARD hardware
Topic: RB 600A Time issues
Replies: 7
Views: 2440

Re: RB 600A Time issues

yes, you have to use NTP, because routerboards don't have battery to remember clock I am faced with the same issue, how do i synchronize my router board to ntp server. My Time zone is Africa/Lagos. I need step by step as you used to achieve it. This is affecting my hotspot users i created under use...
by dunga
Sat Dec 19, 2009 8:30 pm
Forum: The User Manager
Topic: USER MANAGER RATE LIMIT
Replies: 9
Views: 22402

Re: USER MANAGER RATE LIMIT

do u want to limit that single user who shares his bandwoth among those 6 PC or what ;) yes, i want to limit him and do same for others. u could get better answers if u draw your ruter and your client on schematic picture :)[/quote] As regards the bandwidth, i know that hotspot in queue shows unlimi...
by dunga
Sat Nov 14, 2009 11:30 am
Forum: General
Topic: help some sites not opening in MT using hotspot
Replies: 3
Views: 1081

Re: help some sites not opening in MT using hotspot

My router board is in bridge mode, but the hotspot server is on a pc running ver 3.22.

Where and how in Mt do i set the MTU.

Thanks
by dunga
Fri Nov 13, 2009 9:37 pm
Forum: General
Topic: problem with yahoo Site
Replies: 1
Views: 830

problem with yahoo Site

i have a big problem surfing yahoo web site. any time I log on to Yahoo, it will not open but other pages open very fast. Can anyone tell me how to solve the problem. Send response to: eagohas@yahoo.com
by dunga
Fri Nov 13, 2009 8:44 pm
Forum: General
Topic: help some sites not opening in MT using hotspot
Replies: 3
Views: 1081

help some sites not opening in MT using hotspot

hello,
I am having some problems with opening mail.yahoo.com, for some people on my hotspot. They cannot open yahoomail site but other sites can open.
sample page.jpg
What shd be the likely cause of this problem.

Thanks
by dunga
Fri Nov 13, 2009 10:58 am
Forum: General
Topic: server acting up.
Replies: 12
Views: 3544

Re: server acting up.

Chupka, can u help explain to me each script line by line. Bruteforce login prevention From MikroTik Wiki (Redirected from Bruteforce login prevention (FTP & SSH) Jump to: navigation, search These are 2 basic scripts I use frequently that are from the forum (written by other users) allows only 1...
by dunga
Thu Nov 12, 2009 6:34 pm
Forum: General
Topic: server acting up.
Replies: 12
Views: 3544

Re: server acting up.

(91 messages not shown) Hello, Please, i do see the logs when i open a new terminal on my MT box. How do i stop or block this people from doing this thing cus they are not ip from my source rather from unknown source. nov/12/2009 16:22:33 system,error,critical login failure for user info from 161. 5...
by dunga
Tue Nov 10, 2009 12:01 pm
Forum: General
Topic: Transperent Proxy with Hotspot enabled Help
Replies: 7
Views: 1848

Re: Transperent Proxy with Hotspot enabled Help

I am in need of this settings, having Hotspot and Transparent proxy on the same MT router. It does rate limit the traffic from the proxy. Unless I'm thinking about this wrong, it should and overriding it is a bad idea. Consider a client requesting a page that isn't yet in the proxy. The proxy has to...
by dunga
Sun Nov 08, 2009 7:02 pm
Forum: General
Topic: CONFIGURING RB600 FOR AP AND HOTSPOT
Replies: 6
Views: 1447

Re: CONFIGURING RB600 FOR AP AND HOTSPOT

I have tried all the links, they did not explain my situation. I have resorted to try another way may be that will be helpful. I want to install the MT/Hostspot in a pc. But I want to use the wlan1 and wlan as acess points, How do i now bridge the 3 interfaces to gether. The method for ether1 and wl...
by dunga
Wed Nov 04, 2009 8:08 pm
Forum: General
Topic: CONFIGURING RB600 FOR AP AND HOTSPOT
Replies: 6
Views: 1447

Re: CONFIGURING RB600 FOR AP AND HOTSPOT

can u help give me configuration examples, ss my case is.

The bridged interface, wil it not carry any ip address? Then the nating and other firewall settings comes from where, hw will the clients get their ip addresses from.

Thanks
by dunga
Wed Nov 04, 2009 3:25 pm
Forum: General
Topic: CONFIGURING RB600 FOR AP AND HOTSPOT
Replies: 6
Views: 1447

Re: CONFIGURING RB600 FOR AP AND HOTSPOT

i did make wlan1 and wlan2 as bridge, but yet wen i put d ip address, it takes d address of the ether1 as routing address, and the dhcp takes d same ip range.

if u have such configuration in the wiki, plz send me d link
by dunga
Tue Nov 03, 2009 8:55 pm
Forum: General
Topic: CONFIGURING RB600 FOR AP AND HOTSPOT
Replies: 6
Views: 1447

CONFIGURING RB600 FOR AP AND HOTSPOT

I have RB600 with 2 wlans, 3 ether. i want to configure it for wireless access point and hotspot on the same rb. i want a situation where the 2 wlans to be seen by outside clients, and to be controlled by one hotspot in the same router. This is what i want to achieve. Internet -------ether1------ (h...
by dunga
Tue Nov 03, 2009 12:45 pm
Forum: General
Topic: server acting up.
Replies: 12
Views: 3544

Re: server acting up.

Are u suggesting for me to add then one after the other, since i cannot add all the firewall at once.
by dunga
Tue Nov 03, 2009 12:30 pm
Forum: The User Manager
Topic: Allow user from 7pm - 6am on daily for a period of 1 month
Replies: 10
Views: 3899

Re: Allow user from 7pm - 6am on daily for a period of 1 month

I thought this filter rule will allow all internet from the said period,but i am looking for some specific users alone not all of them. The issue i think will affect all users in the network
by dunga
Mon Nov 02, 2009 7:18 pm
Forum: The User Manager
Topic: Allow user from 7pm - 6am on daily for a period of 1 month
Replies: 10
Views: 3899

Re: Allow user from 7pm - 6am on daily for a period of 1 month

Currently it is not possible by HotSpot/User Manager to get 7PM-6AM, I believe this feature will be possible in new User Manager. Use uptime-limit to set week or month as period for Internet usage. To allow Internet from 7Pm - 6Am add /firewall filter rule to block traffic from customer network, wh...
by dunga
Mon Nov 02, 2009 4:23 pm
Forum: Wireless Networking
Topic: configuration web proxy and hotspot in the same pc
Replies: 3
Views: 1699

Re: configuration web proxy and hotspot in the same pc

Hi, did you get any info on cache-proxy + hotspot on 3.30 ? I got it to work on 3.23, quite simple, but now on 3.30 quite a few setup screens changed, so I failed to get it work on new release. Also, because it seems to me, that the hotspot-implementation changed quite a bit. May be, I could get ca...
by dunga
Fri Oct 30, 2009 10:03 am
Forum: General
Topic: server acting up.
Replies: 12
Views: 3544

Re: server acting up.

This is the error i am getting from my router OS when i want to block some worm ports. [admin@installer] ip firewall filter> add chain=forward protocol=tcp dst-p ort=135-139, 445, 1434, 4444 action=drop comment="Drop TCP \ \"... Worms" disabled=no no such argument (445,) [admin@instal...
by dunga
Thu Oct 22, 2009 6:39 pm
Forum: General
Topic: HELP WITH IDLE TIMEOUT IN HOTSPOT
Replies: 6
Views: 15686

Re: HELP WITH IDLE TIMEOUT IN HOTSPOT

thanks,
But I am not using the default, unless if someone did not specify the keep alive timeout value, it takes the default value. I have tried doing that but wil monitor it and give you feedback.

Thanks
by dunga
Thu Oct 22, 2009 12:03 pm
Forum: General
Topic: HELP WITH IDLE TIMEOUT IN HOTSPOT
Replies: 6
Views: 15686

Re: HELP WITH IDLE TIMEOUT IN HOTSPOT

here is my log [admin@Installer] /log> pr 06:57:57 system,error,critical router was rebooted without proper shutdown 06:58:02 dhcp,info dhcp1 assigned 172.16.0.12 to 00:23:8B:81:3D:58 06:59:07 hotspot,info,debug naphtali (172.16.0.11): trying to log in by http-chap 06:59:07 hotspot,account,info,debu...
by dunga
Wed Oct 21, 2009 10:22 pm
Forum: General
Topic: HELP WITH IDLE TIMEOUT IN HOTSPOT
Replies: 6
Views: 15686

HELP WITH IDLE TIMEOUT IN HOTSPOT

Hello, I am having some problems with my hotspot clients. They were all connecting and working but within 2 -3mins, their connection will log them out and display the login page again. This situation has been distrubing as they cant do anything thru the hotspot. Here is my hospot details /ip hotspot...
by dunga
Fri Oct 16, 2009 1:38 pm
Forum: Beginner Basics
Topic: simple queue timing + priority
Replies: 7
Views: 2315

Re: simple queue timing + priority

Hello, Can someone help me on setting up a simple queue for different people as quoted below. hello i have a mikrotik server 3.2 i have about 10 clients. some are corporate clients and some are distributors themselves. what i want to do is limit bandwidth for the corporate clients after a certain ti...
by dunga
Mon Oct 12, 2009 7:49 pm
Forum: The User Manager
Topic: USER MANAGER RATE LIMIT
Replies: 9
Views: 22402

Re: USER MANAGER RATE LIMIT

thanks man, u are a gentle man. i need you to help me set up queue for hotspot users. i have a client who claims to be using 1pc but i later discovered dat he has about 6pcs in his office all connected to interenet. i want to setup a limit for him at least create d queue so dat i can limit him. agai...
by dunga
Mon Oct 12, 2009 6:52 pm
Forum: General
Topic: setting up bandwidth shaping on a PPPOE WISP mikrotik.
Replies: 22
Views: 9295

Re: setting up bandwidth shaping on a PPPOE WISP mikrotik.

I am having some problems with my link, my hotspot users are complaining to bad that when they want to open a page, it will show error in connetion/connection reset. Why is it doing like that. Here is my firewall filter settings [admin@Installer] /ip firewall filter> pr Flags: X - disabled, I - inva...
by dunga
Sun Oct 11, 2009 10:22 pm
Forum: General
Topic: Burst for each TCP connection
Replies: 37
Views: 25133

Re: Burst for each TCP connection

What of for hotspot users.

I have 3 interfaces,
ether1 = wan- isp
ether2 = hotspot ip range: 172.16.0.0/24
ether3 = local users = ip range : 192.168.20.0/24

How do i go about it
by dunga
Sun Oct 11, 2009 8:57 pm
Forum: Beginner Basics
Topic: simple queue timing + priority
Replies: 7
Views: 2315

Re: simple queue timing + priority

hello How did you achieve the above, cus i want to set bandwidth limting for my users, on hotspot and wireless. the above can be achieved with simple queuing. In case you use HotSpot, you need to use scripts and scheduler to change the bandwitdh dinamically How do u set up the simple queue. I need ...
by dunga
Sun Oct 11, 2009 8:51 pm
Forum: The User Manager
Topic: USER MANAGER RATE LIMIT
Replies: 9
Views: 22402

Re: USER MANAGER RATE LIMIT

The "Burst threshold" cannot be higher than the "Rate Limit" RX and TX are seen from the perspective of the router. RX is what the router receives from the client, i.e clients uploads. TX is what is transmitted to the client by the router, i.e. clients downloads. Skilful, from t...
by dunga
Sat Oct 10, 2009 1:19 pm
Forum: Beginner Basics
Topic: simple queue timing + priority
Replies: 7
Views: 2315

Re: simple queue timing + priority

hello i have a mikrotik server 3.2 i have about 10 clients. some are corporate clients and some are distributors themselves. what i want to do is limit bandwidth for the corporate clients after a certain time. lets say i want to give them 256k/256k from 7 am to 7 pm and then 128/128k from 7pm to 7a...
by dunga
Sat Oct 10, 2009 12:58 pm
Forum: The User Manager
Topic: USER MANAGER RATE LIMIT
Replies: 9
Views: 22402

USER MANAGER RATE LIMIT

hello, I am having some problem setting up rate limit in user manager. After creating or setting up rate limit for a user, it starts having problem fro logging to hotspot. See attached picture the rate limit as i set them. usermaan rate limit.JPG here is the log it generated when i log in to the mik...
by dunga
Thu Oct 08, 2009 3:29 pm
Forum: General
Topic: setting up bandwidth shaping on a PPPOE WISP mikrotik.
Replies: 22
Views: 9295

Re: setting up bandwidth shaping on a PPPOE WISP mikrotik.

Thanks,
my main concern is to sahpe my hotspot users because the mikrotik is set up for them mostly for authentication and others.

thanks
by dunga
Wed Oct 07, 2009 7:04 pm
Forum: General
Topic: setting up bandwidth shaping on a PPPOE WISP mikrotik.
Replies: 22
Views: 9295

Re: setting up bandwidth shaping on a PPPOE WISP mikrotik.

I have been able to shape based on the steps outlined by deer12. My question is, how can i limit and give bandwidt to my hotspot users because from the queue, they are showing unlimited in both upload and and download, as shown in the picture. i have tried to make some adjustments on it, yet it is n...
by dunga
Wed Oct 07, 2009 11:49 am
Forum: General
Topic: setting up bandwidth shaping on a PPPOE WISP mikrotik.
Replies: 22
Views: 9295

Re: setting up bandwidth shaping on a PPPOE WISP mikrotik.

/queue type set default kind=pfifo name=default pfifo-limit=50 set ethernet-default kind=pfifo name=ethernet-default pfifo-limit=50 set wireless-default kind=sfq name=wireless-default sfq-allot=1514 \ sfq-perturb=5 set synchronous-default kind=red name=synchronous-default red-avg-packet=1000 \ red-...
by dunga
Tue Oct 06, 2009 6:00 pm
Forum: General
Topic: setting up bandwidth shaping on a PPPOE WISP mikrotik.
Replies: 22
Views: 9295

Re: setting up bandwidth shaping on a PPPOE WISP mikrotik.

Thanks for making things simplier for me. But i want to ask something, concerning priorites in the bandwidth issues/shaping. [quote="derr12"] i have it set up as following sip priority 1 http priority2 pop priority 3 smtp priority4 other priority 5 p2p priority 8 i have found that a lot of...
by dunga
Mon Oct 05, 2009 12:20 pm
Forum: General
Topic: Hotspot+cache-proxy+parent-proxy on 3.30 ? HOWTO ?
Replies: 8
Views: 6272

Re: Hotspot+cache-proxy+parent-proxy on 3.30 ? HOWTO ?

hello Fewi, I dont seems to understand your setup as it is not working for me. Alrighy then. This is a setup for Hotspot+Transparent Proxy. I do not use the parent proxy feature. Also, this is for a transparent proxy setup for both a Hotspot and a non-Hotspot VLAN. Look at my setup,I have ether1 as ...
by dunga
Sun Oct 04, 2009 9:29 pm
Forum: General
Topic: Hotspot+cache-proxy+parent-proxy on 3.30 ? HOWTO ?
Replies: 8
Views: 6272

Re: Hotspot+cache-proxy+parent-proxy on 3.30 ? HOWTO ?

Alrighy then. This is a setup for Hotspot+Transparent Proxy. I do not use the parent proxy feature. Also, this is for a transparent proxy setup for both a Hotspot and a non-Hotspot VLAN. Can this setup work for a mT box with 2 network cards, Ether1 (WAN), ether2 - Hotspot, and ether3- lan without h...
by dunga
Sun Oct 04, 2009 9:07 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 369
Views: 357991

Re: Sample Hotspot Page - Sticky Please

Here is another sample of login page of hotspot. I like this sample page, can u plz send to us here the login.html, so that we can edit, we that are not good at html. os this one HI, here is my new hotspot Page for my LAN users morethan 1000 THanks Dude nice idea to share the pages http://i30.tinyp...
by dunga
Sun Oct 04, 2009 8:48 pm
Forum: Wireless Networking
Topic: configuration web proxy and hotspot in the same pc
Replies: 3
Views: 1699

Re: configuration web proxy and hotspot in the same pc

Hi, did you get any info on cache-proxy + hotspot on 3.30 ? I got it to work on 3.23, quite simple, but now on 3.30 quite a few setup screens changed, so I failed to get it work on new release. Also, because it seems to me, that the hotspot-implementation changed quite a bit. May be, I could get ca...
by dunga
Sat Oct 03, 2009 8:31 pm
Forum: The User Manager
Topic: HELP ON USER MANAGER CONFIGURATION
Replies: 3
Views: 1898

HELP ON USER MANAGER CONFIGURATION

Hello, I just set up router os 3.22 in my system and trying to setup hotspot in the same box. But after I have setup the configuration all as directed in the wiki, i started seeing some strange scripts in my firewall. My problems are that; I cannot login to the user mnager thru web, and i see some f...
by dunga
Wed Sep 30, 2009 10:53 am
Forum: Wireless Networking
Topic: wireless access point with hotspot
Replies: 0
Views: 788

wireless access point with hotspot

I have a setup i want to achieve. I have setup a wireless access point with hotspot running without problem. But i want to extend the wireless link/signal to other buildings in the same compaound, but with other wireless routers. How do i go about setting it up so that people who connected to the wi...
by dunga
Mon Sep 28, 2009 6:53 pm
Forum: Wireless Networking
Topic: HOW TO SETUP A WIRELESS REPEATER WITH MIKROTIK RADIO
Replies: 1
Views: 1581

HOW TO SETUP A WIRELESS REPEATER WITH MIKROTIK RADIO

hello, i have the target to setup a wireless repeater for a school. I have the 1sst AP already running with hotspot, but i want a situation where i want to extend the wireless link to another building which people in that area cannot connect to the router/hotspot without getting another AP setup for...
by dunga
Mon Sep 28, 2009 6:44 pm
Forum: General
Topic: setting up bandwidth shaping on a PPPOE WISP mikrotik.
Replies: 22
Views: 9295

Re: setting up bandwidth shaping on a PPPOE WISP mikrotik.

I have read the manual in the link several times without understanding it. That is why i needed step-by-step on how u achived the bandwidth shaping, as that is the most important aspect in network management. I really need this cus i dont want one person who just connected to my network thru hotspot...
by dunga
Fri Sep 25, 2009 10:13 pm
Forum: General
Topic: setting up bandwidth shaping on a PPPOE WISP mikrotik.
Replies: 22
Views: 9295

Re: setting up bandwidth shaping on a PPPOE WISP mikrotik.

Deer12, can u help me send to me the step by step you used in achieving this shaped stuff and queuing in mikrotik using winbox, cus i am facing the same issue as you have solved it. I have about 128kbps/512kbps bandwidth to share among my users in my network. My lan users on ether2 (dhcp) and hotspo...
by dunga
Fri Sep 25, 2009 9:57 pm
Forum: The User Manager
Topic: User Manager Feature request - sticky please?
Replies: 192
Views: 68438

Re: User Manager Feature request - sticky please?

can someone only upgrade the user manager package alone without upgrading other packages and still retain the data in the user manager. Will downgrading still make it possible not to lose the data created in UM, I am asking because of the issues with v4.0 before it is rc Please, i need an urgent res...
by dunga
Sun Sep 20, 2009 8:46 pm
Forum: The User Manager
Topic: User Manager Feature request - sticky please?
Replies: 192
Views: 68438

Re: User Manager Feature request - sticky please?

Assuming someone asked for like 1hr browsing Specify uptime limit (not credit/profile validity time) in this case. Assuming batch of users are to be created or generated and printed, is there an option to make it available to all generated users. Is it possible to only upgrade/update the UM package...
by dunga
Thu Sep 17, 2009 5:43 pm
Forum: The User Manager
Topic: User Manager Feature request - sticky please?
Replies: 192
Views: 68438

Re: User Manager Feature request - sticky please?

Other things i suggest mikrotik to do in user manager are as follows; Assuming someone asked for like 1hr browsing and the account is created without any time limit, that is uptime limit is 0s. after the person must have used like 30mins and logs out, when he comes back to log in using the same user...
by dunga
Wed Sep 16, 2009 10:58 am
Forum: Wireless Networking
Topic: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT
Replies: 8
Views: 2579

Re: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT

Thanks for your advice.
by dunga
Tue Sep 15, 2009 9:44 pm
Forum: Wireless Networking
Topic: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT
Replies: 8
Views: 2579

Re: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT

Will try that as soon as i am thru with some issues when i come back from site. Just take a look at this picture and advice me. i have this radio, whihc i want to use as an access point, but when i change it to Ap+Bridge, it shows license do es not support ap+bridge mode. i have upgraded the router ...
by dunga
Tue Sep 15, 2009 12:18 pm
Forum: The User Manager
Topic: User Manager Feature request - sticky please?
Replies: 192
Views: 68438

Re: User Manager Feature request - sticky please?

There is one issue that have not being implemented and placed in user manager. i have observed that, even if you disable a client/username, that user still counts. let me explain myself very well. A user logged in for 2days and inform us that he is going out for vacation and will be back in 2months ...
by dunga
Tue Sep 15, 2009 10:43 am
Forum: Wireless Networking
Topic: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT
Replies: 8
Views: 2579

Re: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT

i have done that, trying to upgrade the routerboard, but when i go to log, it displays routerboard cannot be upgraded. I want to ask, does it mean that routerboard, without daughterboard cannot be upgraded? I am in need to upgrade this radio, because i am at the risk of refunding for the cost if i d...
by dunga
Wed Sep 02, 2009 10:44 pm
Forum: Wireless Networking
Topic: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT
Replies: 8
Views: 2579

Re: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT

Skillful,
How can i achieve that at least 3 of the above steps, as for usermanager, the package is not installed in the board.

How do i go about it, i need detailed step by step of acheiving such.

Thanks
by dunga
Wed Sep 02, 2009 2:23 pm
Forum: Wireless Networking
Topic: MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT
Replies: 8
Views: 2579

MIKROTIK RADIO (RB 532) FOR WIRELESS AND HOTSPOT

hello, I have a routerboard that i want to use to run as acess point and hotspot, the routerboard is RB532. I have chkeed in it there is not user manager installed and this is what i want to achieve using the radio. 1. I want to use it as AP, so that people that sees it will connect thru hotspot 2. ...
by dunga
Sat Aug 15, 2009 11:54 am
Forum: General
Topic: tcp connection limit.
Replies: 62
Views: 47177

Re: tcp connection limit.

based on the above topic. I have d same issue whihc i want to aachieve. assuming I have 3 NIC in the MT. ether2 is for my lan users, while ether3 is for my hotspot users/wireless users. how do i run the command to affect both the lan users and and hotsppt users. My lan users ip range are 192.168.0....
by dunga
Mon Aug 10, 2009 8:34 pm
Forum: General
Topic: tcp connection limit.
Replies: 62
Views: 47177

Re: tcp connection limit.

based on the above topic. I have d same issue whihc i want to aachieve. assuming I have 3 NIC in the MT. ether2 is for my lan users, while ether3 is for my hotspot users/wireless users. how do i run the command to affect both the lan users and and hotsppt users. My lan users ip range are 192.168.0.1...
by dunga
Mon Aug 10, 2009 12:20 pm
Forum: Wireless Networking
Topic: WIRELESS AP CONFIGURATION IN BRIDGE MODE
Replies: 3
Views: 3758

Re: WIRELESS AP CONFIGURATION IN BRIDGE MODE

The problem i am having is how to configure the RB 532 that has 1 wirless card and 3 ethers. i am using the ether1 and wlan1, so that my wirless clients (laptops) will connect thru thw wlan and their ip address will be gotten from the server. meaning i just want the RB532 to be only access point. Th...
by dunga
Sat Aug 08, 2009 10:11 pm
Forum: Wireless Networking
Topic: WIRELESS AP CONFIGURATION IN BRIDGE MODE
Replies: 3
Views: 3758

WIRELESS AP CONFIGURATION IN BRIDGE MODE

hello, I want to setup a Mikrotik radio for access point but i have a radius server in another system. How do i make that MT radio serve as only access point (AP) but the ip address given to connected clients are received from my radius server and the authentications are done there. What i needed is...
by dunga
Fri Aug 07, 2009 3:01 pm
Forum: The User Manager
Topic: change user-manager password
Replies: 4
Views: 30487

Re: change user-manager password

Thanks Normis. It worked like magic. I have removed many subscribers that wat created by my second in an error.
by dunga
Fri Aug 07, 2009 2:47 pm
Forum: General
Topic: HELP ON HOTSPOT HOST DISPLAY AND DHCP
Replies: 1
Views: 653

HELP ON HOTSPOT HOST DISPLAY AND DHCP

Hello All, I am not familiar with the display on my host when i view my hotspot host page. Can someone explain to me what is the meaning of D, AD, P, H as displayed in the attached picture. At times I see many PCs on the lease. Plz i need more and detailed explanations on them. Thanks hotspot page2....
by dunga
Fri Aug 07, 2009 1:25 pm
Forum: The User Manager
Topic: change user-manager password
Replies: 4
Views: 30487

Re: change user-manager password

Can somone delete a subcriber for hotspot or user manager from the console?.

Again I want to ask, can you help me with configuration of hotspot and transparent web-proxy in the same mikrotik box. So that many sites including https will open for my connected hotspot users.
by dunga
Thu Aug 06, 2009 5:28 pm
Forum: Beginner Basics
Topic: how to limit every src client to have only 2 connections?
Replies: 17
Views: 4081

Re: how to limit every src client to have only 2 connections?

Thanks, Will try it b4 the end of today. What if I have like some people who are using ti for cyber cafe. How do I split them and make some get maximum connection of say 60 connections while personal users make use of 6. This is cus some people in the hotspot are using it for cyber cafe. Again, Will...
by dunga
Wed Aug 05, 2009 10:27 pm
Forum: Beginner Basics
Topic: how to limit every src client to have only 2 connections?
Replies: 17
Views: 4081

Re: how to limit every src client to have only 2 connections?

32 is subnet, in which connections are counted. /32 - is per user. /24 - per your network I am getting more confused. Do U advice i use /32 instead of /24 which is my network subnet. Moreover i want to effect the limit based on per user in the subnet of /24. This is my lan ip settings: 192.168.0.10...
by dunga
Wed Aug 05, 2009 6:09 pm
Forum: Beginner Basics
Topic: how to limit every src client to have only 2 connections?
Replies: 17
Views: 4081

Re: how to limit every src client to have only 2 connections?

add firewall filter fule:

chain=forward
src-address=192.168.0.10-192.168.0.254
protocol=tcp
tcp-flags=syn
connection-limit=6,32
action=drop
Thanks Chupaka, i will try it wen i get home, but wat is the meaning of the 32, i tot it is the subnet of the network in question.
by dunga
Wed Aug 05, 2009 12:34 pm
Forum: Beginner Basics
Topic: Hotspot Users on Transparent Mode
Replies: 2
Views: 5768

Re: Hotspot Users on Transparent Mode

Hi, First Enable and configure Webproxy to make it transparent you need to add dst-nat rule. Rule: /ip firewall nat chain=dst-nat, protocol=tcp, dst-port=80, action=redirect, to-port=8080 (Proxy Port) uncheck the transparent proxy from Hotspot. /ip hotspot user profile Ashish, Will the above firewa...
by dunga
Wed Aug 05, 2009 12:23 pm
Forum: Beginner Basics
Topic: how to limit every src client to have only 2 connections?
Replies: 17
Views: 4081

Re: how to limit every src client to have only 2 connections?

2 connections is too little, they won't have any connectivity at all. example how to limit to 5: /ip firewall filter add chain=forward protocol=tcp tcp-flags=syn connection-limit=6,32 action=drop (6th connection per /32 subnet (each IP) will be dropped) Plz Normis, i do not get this very clearly. A...
by dunga
Wed Aug 05, 2009 12:02 pm
Forum: Wireless Networking
Topic: configuration web proxy and hotspot in the same pc
Replies: 3
Views: 1699

configuration web proxy and hotspot in the same pc

Hello, all, I am trying to achieve something but do not know if it has any implication on the other. I want to enable transparent web cache for my clients. I need a detail step by step to achieve that in Mikrotik, so that some https sites will equally open from my lan users. Is it possible to have b...
by dunga
Mon Jun 29, 2009 10:34 pm
Forum: Wireless Networking
Topic: HOW TO UPGRADE A ROUTER BOARD
Replies: 2
Views: 1176

Re: Help on hotspot for wlan

Plz, I have configured the wlan to distribute the hotspot, yet it cannot display the log in page. If I remove or disable the hotspot, wireless connected computers will display. What is my area dat i did wrong. Here is my wireless configurations Flags: X - disabled, R - running 0 R name="wlan1&q...
by dunga
Fri Jun 26, 2009 4:53 pm
Forum: General
Topic: Sample Hotspot Page - Sticky Please
Replies: 369
Views: 357991

Re: Sample Hotspot Page - Sticky Please

Every Body,
Please Upload your Sample Hotspot Login Page - It will Give a GOOD idea to all of us for Designing better.
HotSpot.JPG
t

Plz can someone help me work on my page, i am ready to send my login.html to the person for update like this one above by ashish. See my hotspot page
by dunga
Fri Jun 26, 2009 3:36 pm
Forum: Wireless Networking
Topic: HOW TO UPGRADE A ROUTER BOARD
Replies: 2
Views: 1176

HOW TO UPGRADE A ROUTER BOARD

Hello, I am having some problems to upgrade the router board. I have a router board with version 2.9.46, with level 4 lincense in it but the chipset (atheros) version i do not know. How do i determine the version or board version i am using, and the current upgrade link, cus i want to use the radio ...
by dunga
Thu May 28, 2009 11:41 am
Forum: RouterBOARD hardware
Topic: admin password
Replies: 20
Views: 28521

Re: admin password

I am having the same problem. I forgot the password to log into my routerboard, which i used for point to point connection. I can access the client side but cannot log into the base. what is the possible solution cus i dont want to bring down the radio as it is hanged on the mast. Your help is appre...
by dunga
Tue May 19, 2009 1:11 pm
Forum: Forwarding Protocols
Topic: How to block ip address in MT
Replies: 21
Views: 115132

How to block ip address in MT

Hello friends, I know this topic must have been answered several times, but i could not get the area it was answered. I have a problem with my MT router, if I log in thru winbox, i will see some login attempts from a particular ip address trying to login to my router with diffrent names. I want to b...
by dunga
Wed Apr 22, 2009 9:52 pm
Forum: Beginner Basics
Topic: HELP ON SETTING THE SAME BANDWIDTH FOR LAN PC
Replies: 1
Views: 964

HELP ON SETTING THE SAME BANDWIDTH FOR LAN PC

Hello all, I am having some problems with my lan computers connected to my mikrotik. I want to limit bandwidth for all my lan computer so that each will use a maximum of 8kbps so that irrespective what the other lan user is doing it will not affect others as they will be browsing at the same rate. M...
by dunga
Mon Apr 20, 2009 10:05 am
Forum: Beginner Basics
Topic: Router Setup problem
Replies: 15
Views: 3781

Re: Router Setup problem

I set it up the way you are saying. When I ping 192.168.10.254, I get a reply. When I ping 41.220.238.4, it gives me reply from 41.220.228.130, destination host unreachable. Since you cannot ping your gateway, you have to check your cable or change it. Try use crossover cable from your ether2 to th...
by dunga
Fri Apr 17, 2009 12:52 pm
Forum: General
Topic: HELP WITH TRANSPARENT PROXY WITH HOTSPOT
Replies: 2
Views: 2253

Re: HELP WITH TRANSPARENT PROXY WITH HOTSPOT

i setup my hotpsot thru winbox as i am not familiar with commandline. What i am asking is that, if i enable transparent web proxy for my lan, will it affect my hotspot in anyway, becos i want my MT to cache websites so that my hotpsot users will not make request frequently to the internet. When all ...
by dunga
Tue Apr 14, 2009 7:26 pm
Forum: General
Topic: HELP WITH TRANSPARENT PROXY WITH HOTSPOT
Replies: 2
Views: 2253

HELP WITH TRANSPARENT PROXY WITH HOTSPOT

hello all, I want to know if it will be good to run both hotspot and transparent proxy for my lan. I have setup the hotspot and working perfectly but i have not setup the web proxy cus i am afraid it might crash. what are the basic seetings for transparent proxy for my lan, and that will allow secur...
by dunga
Sun Apr 12, 2009 11:40 am
Forum: Wireless Networking
Topic: HELP WITH POINT TO POINT CONNECTION
Replies: 7
Views: 2389

Re: HELP WITH POINT TO POINT CONNECTION

No One has answered my question yet. How do i make the computer in the remote office browse the internet with d same static ip of the one i have in the switch of my base radio. assuming the static ip on the switch is 198.123.123.24/26 network.

thanks
by dunga
Sat Apr 11, 2009 1:25 pm
Forum: Wireless Networking
Topic: HELP WITH POINT TO POINT CONNECTION
Replies: 7
Views: 2389

Re: HELP WITH POINT TO POINT CONNECTION

Actually, do not be surprised about my recent update, it is the zeal to know as someone told me much thinkg MT can do. From MT radio, i have, which i think is L3 lincense does not support ap-brige hence the option for the bridge mode becomes important. Since what i want to achieve is extending my ne...
by dunga
Thu Apr 09, 2009 6:07 pm
Forum: Wireless Networking
Topic: HELP WITH POINT TO POINT CONNECTION
Replies: 7
Views: 2389

HELP WITH POINT TO POINT CONNECTION

Hello all, plz i am in desparate need of solution to my problem. I have established a wireless connection for two offices but i am having a serious problem of accessing the internet from the station side of the mikrotik radio. The one radio is on Brigde mode and the station is wds-station. I cannot ...
by dunga
Thu Apr 09, 2009 10:43 am
Forum: Wireless Networking
Topic: Need some help setting up a transparent bridge.
Replies: 4
Views: 1515

Re: Need some help setting up a transparent bridge.

I have a similar problem, but i was able to establish the connection but how do i make it to get internet access from the client side. Assuming they are not bridge cus someone suggested that i shd bridge the network. I want it in such a way that if i assign a static ip from the from my network which...
by dunga
Wed Apr 08, 2009 9:32 pm
Forum: RouterBOARD hardware
Topic: PROBLEM WITH P2P CONNECTION USING 2 MIKROTIK RADIOS
Replies: 0
Views: 800

PROBLEM WITH P2P CONNECTION USING 2 MIKROTIK RADIOS

Hello all, pl zi am having problem connecting or tunning a point to point connection with 2 mikrotik radios. I have connected the 2 radios, one as bridge and the other one wds-bridge or station. In teh 2 radios, i enabled bridgde and the connected but i cannot browse from the other client station, e...
by dunga
Tue Apr 07, 2009 2:09 pm
Forum: RouterBOARD hardware
Topic: I NEED EXPLANATION ON BANDWIDTH IN USER MANAGER
Replies: 4
Views: 1219

Re: I NEED EXPLANATION ON BANDWIDTH IN USER MANAGER

Thanks, I have tried it yet it cpould not work out for me. what i am failing to access are the sites with https, just like yahoomail and others that uses https. I can access other sites but the prboem i am having is dat i cant access sites with https (secure sites). The MT board i am using is rb boa...
by dunga
Fri Apr 03, 2009 8:10 pm
Forum: RouterBOARD hardware
Topic: I NEED EXPLANATION ON BANDWIDTH IN USER MANAGER
Replies: 4
Views: 1219

Re: I NEED EXPLANATION ON BANDWIDTH IN USER MANAGER

Thanks for the reply. From what you are saying, the mimimum should be 28kb or 32kb. what will be the best option for wireless clients for one pc. I have another problem, i want to know how to setup a transparent proxy to allow opening sites that are https and other sites that are secured. right now ...