Community discussions

MikroTik App

Search found 403 matches

  • 1
  • 2
by chvdr
Fri Jan 20, 2012 12:47 pm
Forum: RouterBOARD hardware
Topic: RB751U External Antenna
Replies: 9
Views: 10159

Re: RB751U External Antenna

like Uldis said in other topic: One problem could be because of the too much interference received from the external antenna (noise from other wireless sources, for example, maybe could be from the 3g radios) and that could cause the RX radio to lower the signal. It depends on the antenna specifica...
by chvdr
Fri Jan 20, 2012 11:20 am
Forum: RouterBOARD hardware
Topic: RB751U External Antenna
Replies: 9
Views: 10159

Re: RB751U External Antenna

Obviously, many people meet same problem.
Can the support make a note, please.
by chvdr
Tue Dec 06, 2011 11:30 pm
Forum: General
Topic: NOT TO DO. Weird instalations?
Replies: 385
Views: 277940

Re: NOT TO DO. Weird instalations?

where is my signal?
i know that place. i was there - it funny
by chvdr
Sat Apr 23, 2011 3:21 pm
Forum: General
Topic: pcq config: pcq-limit and pcq-total-limit settings - how to
Replies: 6
Views: 4974

Re: pcq config: pcq-limit and pcq-total-limit settings - how

on what version? in ROS v5 PCQ was a bit rewitten =)

could you tell us what is on v5

Regards,
Chavdar
by chvdr
Fri Apr 01, 2011 1:31 am
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 39364

Re: RouterOS 5.0 is out!

excuse me, it's my fault...
updated successfully, but from 5RC version
by chvdr
Fri Apr 01, 2011 1:25 am
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 39364

Re: RouterOS 5.0 is out!

hm... i do the same, no problem on my router
by chvdr
Fri Apr 01, 2011 1:15 am
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 39364

Re: RouterOS 5.0 is out!

one time i updated router trough wireless.
wireless package seems to not be saved or damaged during upload to the router

be in mind to check the list of uploaded packages before "/system reboot"
by chvdr
Fri Apr 01, 2011 12:14 am
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 39364

Re: RouterOS 5.0 is out!

I'll be glad to hear that all vlan bugs were gone into the past.

Some our well working VLAN configs stopped when router was updated to newest RC-versions. I hope that v5 solved problems like that. Hurry to test.
by chvdr
Thu Mar 17, 2011 10:47 pm
Forum: General
Topic: VLAN via switch chip: cannot ping router interface
Replies: 26
Views: 10645

Re: VLAN via swtich chip: cannot ping router interface

and what about the medium - some switch that do not support vlan tagging?
by chvdr
Thu Mar 17, 2011 10:05 pm
Forum: General
Topic: VLAN via switch chip: cannot ping router interface
Replies: 26
Views: 10645

Re: VLAN via swtich chip: cannot ping router interface

do reboot both machines. or simply remove old arp entries from. i have such problem every time when i set vlans, 'cause I am the king of the forgetting ;-)
by chvdr
Thu Mar 17, 2011 7:56 pm
Forum: General
Topic: VLAN via switch chip: cannot ping router interface
Replies: 26
Views: 10645

Re: VLAN via swtich chip: cannot ping router interface

have you try to delete old arp entries if any
by chvdr
Wed Mar 16, 2011 10:33 am
Forum: General
Topic: pcq config: pcq-limit and pcq-total-limit settings - how to
Replies: 6
Views: 4974

pcq config: pcq-limit and pcq-total-limit settings - how to

Hello friends, I just wonder how to tune-up my pcq configuration. Bad working pcq-rules depending of "pcq-limit" and "pcq-total-limit" values. I've read wiki pages, Megis' howto, and everything posted on the forum, that can be found. For example, let us consider downstream limita...
by chvdr
Fri Feb 04, 2011 2:34 am
Forum: Wireless Networking
Topic: RouterBOARD SXT:: what max distance with max thr/put?
Replies: 20
Views: 23653

RouterBOARD SXT:: what max distance with max thr/put?

does anybody research maximum distance of RouterBOARD SXT with 100Mbps throughput?
by chvdr
Mon Dec 06, 2010 8:59 am
Forum: General
Topic: Limit Bandwidth for 64 user> IMPORTANT
Replies: 12
Views: 5076

Re: Limit Bandwidth for 64 user> IMPORTANT

Hi there! my last post was... 2007. But I saw that there is an interest. I can only say that there are too many things made by MT for a good client management and traffic limitations. But if you make limit your customer's speed to a fixed speed, you'll lose these customers. Modern time give us many ...
by chvdr
Thu Nov 04, 2010 1:50 pm
Forum: Wireless Networking
Topic: Wireless disconnection messages explained!
Replies: 86
Views: 175607

Re: Wireless disconnection messages explained!

@Normis Could you please explain this message: 'lost connection, not polled for too long'. Can't find it here http://wiki.mikrotik.com/wiki/Wireless_Debug_Logs TIA, Grzegorz. nstreme config needs checking. email support with supout.rif file is there any algorythm to solve such behaviour of the wire...
by chvdr
Sat Jul 10, 2010 7:31 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

what max distance you test
with n-draft m5
by chvdr
Sat Jul 03, 2010 7:44 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

better don't risk. to prevent some trouble. we test 5.0beta2 on pc before. but it cannot be installed on pc. lot of troubles to rollback to 4.xx
by chvdr
Fri Jul 02, 2010 9:57 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

yeah!

impressive!
by chvdr
Thu Jul 01, 2010 7:23 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

iw4eky, show us result of bandwidth-test with direction=both
by chvdr
Thu Jul 01, 2010 7:20 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

no, it isn't a magic. no even impressive result.

let iw4eky show result of bandwidth-test with direction=both
by chvdr
Tue Jun 29, 2010 11:46 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

it's still only a dream
by chvdr
Tue Jun 29, 2010 2:21 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

what cards
what signal levels
by chvdr
Mon Jun 28, 2010 1:20 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

I have a poor link that is only running at 3 mbps with 10 Mhz channel bandwidth. It is a link with no good line of sight, because many trees and bushes are there. Is it possible to use 802.11n for that link and getting more speed? Greetings unfortunately, no. n-draft usable when everything is almos...
by chvdr
Mon Jun 21, 2010 5:41 pm
Forum: General
Topic: RouterOS v4.10 released
Replies: 62
Views: 18821

Re: RouterOS v4.10 released

we had several times "self disappeared card". every time hardware problem was "broken card" - problem.
by chvdr
Sun Jun 20, 2010 8:54 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

yeah! i'll try it.

i meant that if n mode switched and nstreme enabled there is worst results. if nstreme disabled - interference kills everything...

on the other hand, i don't like wsd links, 'cause wds decreases performance.

because of that your last post is very interesting for me
by chvdr
Sun Jun 20, 2010 6:15 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

wds and nstreme?
it works?
by chvdr
Thu Jun 17, 2010 12:14 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 57382

Re: MikroTik RouterOS version 5.0beta2 released!

normis was right - routerboard was upgraded to 4.10 and Manual link works fine.
by chvdr
Sat Jun 12, 2010 11:45 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

...
AM I correct that you work from MS to MS
...
Would be nice if MK will increase the power to +/- 400 mW so that the loss could be compensated for. Call it a R52H+n card.
What is MS? And MK.
by chvdr
Sat Jun 12, 2010 9:22 am
Forum: Forwarding Protocols
Topic: BGP and VRRP
Replies: 5
Views: 4426

Re: BGP and VRRP

I need help setting up BGP on two router boards, but i am a serious first trimmer. Who can help? i suppose many people can help you but nobody will do that. you have to explain some configuration you do. after that many people can tell you what to correct... btw, i am novice on bgp so i can't help
by chvdr
Sat Jun 12, 2010 8:42 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

because our results were terrible in a similar configuration - pcs with 4.9 ar71 cards, 5GHz-a/n, 15km, etc... 80Mbps but if test on single direction (transmit or receive). if direction = both, 12bmps/300Kbps (!!). Thus discussed many times on forum. They said that this is interferrence and we wait ...
by chvdr
Sat Jun 12, 2010 8:37 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

I also tested 802.11n this mooning. On production link simple replace UB5 on both side with R5nH and pigtail cable use some setting like before nstreme enabled, WDS static other side station WDS, adaptive noise immunity ap and client mode all like before on 5Ghz turbo link. Both side 4.9 Mode 5Ghz-...
by chvdr
Fri Jun 11, 2010 4:03 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 57382

Re: MikroTik RouterOS version 5.0beta2 released!

sorry, I tested it with brand new routerboard, but maybe winbox was old
by chvdr
Fri Jun 11, 2010 3:09 pm
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 57382

Re: MikroTik RouterOS version 5.0beta2 released!

ROS 5.0beta2 bugs and confuses met
1. Manual --> PDF version not response to download or load refman2.9.pdf
where did you see a PDF link in RouterOS?

from mikrotik winbox
by chvdr
Fri Jun 11, 2010 7:57 am
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

and what about a customer who inserted a cable to a switch with a cable shorted the switch (entering two cable ends to switches ports)?
by chvdr
Fri Jun 11, 2010 7:53 am
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

Surfertim's suggestion suppresses the fever but doesn't cure the disease. Probably a client of yours has an infected machine. So try to find the source by eliminating each and any one by one until the culprit is found.... that's what I would do. (I am not saying this is the solution, it's an sugges...
by chvdr
Wed Jun 09, 2010 2:08 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

What "last several pictures"? The only images I see of the "Interface List" (your first and second posts) shows bridge1 active with no way to tell which interfaces were assigned there. When I can read your mind, you may refer to me as "Your Royal Excellent Highness", a...
by chvdr
Wed Jun 09, 2010 1:40 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

What "last several pictures"? The only images I see of the "Interface List" (your first and second posts) shows bridge1 active with no way to tell which interfaces were assigned there. When I can read your mind, you may refer to me as "Your Royal Excellent Highness", a...
by chvdr
Tue Jun 08, 2010 6:20 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

But I was thinking the bridge on his setup may have a part in this. If it is looping back traffic, that could really cause some problems. no any bridges on the setup! easy to see after closely reading of all posts Then why in your first and third post, the images of the "Interface" both s...
by chvdr
Mon Jun 07, 2010 11:05 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

and take a look at the last picture above.

there is a source visible, destination, too. it is easy to see that customer that should be stopped is with ip-address 87.120.205.76

after it stopped, everything goes alright
by chvdr
Mon Jun 07, 2010 11:00 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

But I was thinking the bridge on his setup may have a part in this. If it is looping back traffic, that could really cause some problems.

no any bridges on the setup! easy to see after closely reading of all posts
by chvdr
Fri Jun 04, 2010 1:11 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

maybe a routing loop? add firewall filter logging rule to see from what to what interface these packets go. then block wrong flows =) Hi there! At last I captured successfully what actually goes on. I catch the villain... See the picture attached to this post. Gencho_DDoS.PNG Notes: [1]. ether2 is ...
by chvdr
Mon May 24, 2010 9:39 am
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

Are you 100% sure your ether2 interface is not the WAN? No abuses, please... I DO can distinguish between WAN and LAN interfaces... I see so many different ´public´ address on your src list in torch that I would think it is a public interface you run torch on. Yes, this makes me say "strange&q...
by chvdr
Sat May 22, 2010 2:03 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

all these ips are visible for few seconds
after that they mysteriously disappeared
and they cannot be torched
by chvdr
Fri May 21, 2010 7:16 am
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custo

problem still persistent.
anybody CAN help?
by chvdr
Wed May 05, 2010 6:54 am
Forum: General
Topic: MikroTik RouterOS version 5.0beta2 released!
Replies: 139
Views: 57382

Re: MikroTik RouterOS version 5.0beta2 released!

ROS 5.0beta2 bugs and confuses met


1. Manual --> PDF version not response to download or load refman2.9.pdf
2. Console crashes after update from 4.7.
by chvdr
Mon Apr 19, 2010 5:41 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: Best Parabolic Antennas for 802.11N over 30KM

Hi There, Please excuse me but I am a total newbie here. :lol: Has anyone used Dual Polarity Pac Wireless 32dB parabolic? Will they work as well as Jirous 29dB Dual Polarity? I would like to replace an existing 5Ghz link that currently has Pac Wireless 32dB dishes in place, the distance is 30KM and...
by chvdr
Sat Apr 17, 2010 12:07 pm
Forum: RouterBOARD hardware
Topic: Router Board 433 want boot
Replies: 12
Views: 5994

Re: Router Board 433 want boot

btw, when fire up google search with search words 'routerboard', 'failed' and 'boot', first 100 results are rb433 or rb433ah about
by chvdr
Sat Apr 17, 2010 11:13 am
Forum: RouterBOARD hardware
Topic: Router Board 433 want boot
Replies: 12
Views: 5994

Re: Router Board 433 want boot

ah, i forgot - this is problem after week work, power stopped for replacing cables. after power on rb not started.

then it's born to me at office - thus result
by chvdr
Sat Apr 17, 2010 11:11 am
Forum: RouterBOARD hardware
Topic: Router Board 433 want boot
Replies: 12
Views: 5994

Re: Router Board 433 want boot

connect serial cable and see what is output on the terminal. paste it here.

i have rb433 with nor even a sound on startup. actually not started. no signal system ready, only blue lamp lights on power on.

attaching rs 232 - no any output on console. just connected, no output
by chvdr
Sun Apr 04, 2010 10:44 pm
Forum: General
Topic: Installing RouterOS to Compact Flash card and reduce writing
Replies: 6
Views: 2990

Re: Installing RouterOS to Compact Flash card and reduce wri

make logging either in memory or set up remote logging. If you use hotspot, make sure you have disabled "/ip proxy" and set that it does not cache at all. That is basically all you have to and can do. In that case access to storage will be reduced maximum or fully. Has RouterOS any system...
by chvdr
Sun Apr 04, 2010 10:32 pm
Forum: General
Topic: RouterOS 3.31??
Replies: 7
Views: 3329

Re: RouterOS 3.31??

where i can find user-manager for 3.31 ??? can i use 3.30 ? coz that version not available on mikrotik site upgrade to a newer version to get the rest of the packages Id est, the only way to add packages is to add last-version-packages. C'est la vie... Or if you have somewhere collected all version...
by chvdr
Thu Apr 01, 2010 10:51 pm
Forum: General
Topic: 5.0beta1
Replies: 10
Views: 3172

Re: 5.0beta1

It's nothing to do with the Wireless ???
ofcourse, nobody from mikrotik sia interested n&nstream, don't you see...
by chvdr
Tue Mar 16, 2010 10:35 pm
Forum: General
Topic: Moderation on the forum
Replies: 2
Views: 1775

Re: Moderation on the forum

Absolutely right!
by chvdr
Sat Mar 06, 2010 11:36 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custommes

try /ip firewall mangle add chain=prerouting src-address=89.215.105.149 action=passthrough and see whether that rule counts the packets. then, change 'passthrough' to 'log' to see, from what interface the packet comes. then try 'forward' chain no matches found btw, if we have queue rule that limits...
by chvdr
Fri Mar 05, 2010 1:43 am
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custommes

maybe a routing loop? add firewall filter logging rule to see from what to what interface these packets go. then block wrong flows =) yeah, i perfectly know that it's better if find a solution, not scratching away. but can you help to "add firewall filter logging rule to see from what to what ...
by chvdr
Thu Mar 04, 2010 10:20 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custommes

can you imagine how it does solved? with a simple queue that limits "everything else" on the lan interface. goodluck!
by chvdr
Tue Mar 02, 2010 11:17 pm
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Re: Strange: External IP addresses acts as an internal custommes

Hi there! Thanks Chupaka for interest. And an answer. Here are two screenshots with Port/Protocol marked. Nothing interesting can be observed on shots unfortunately. Look that "aliens" (ip-addresses not ours) do big amount of traffic BUT ONLY UPLOAD. With zero download: screenshot_ALIENS_1...
by chvdr
Mon Mar 01, 2010 6:18 pm
Forum: RouterBOARD hardware
Topic: [help]RB-411 restart
Replies: 4
Views: 1537

Re: [help]RB-411 restart

i can't use rb-411.
rb-411 restart if enable wlan
can anybody help me??

use proper power supply
by chvdr
Mon Mar 01, 2010 7:14 am
Forum: General
Topic: Strange: External IP addresses acts as an internal custommes
Replies: 28
Views: 3853

Strange: External IP addresses acts as an internal custommes

Hello guys, Strange behavior of non-existing customers makes me problems. Let me try to explain: Let us consider a router with LAN interface ether2 and WAN - ether1. No additional interfaces that functioning at all. / tool torch shows that ip-addresses 200.121.241.221 and 118.160.20.234 make some (b...
by chvdr
Sat Oct 31, 2009 8:17 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

Hi All! I need help! I used Turbo Nstreme2, p2p link, distance 4,5km, and works fine. Bandwidth 50/10Mbit live traffic, ping 1-10ms max. I will need a bigger bandwidth because of this I changed the link it for a N link. Now the ping time is high and packet loss. Detail: x86 system, r52n, antenna du...
by chvdr
Tue Oct 27, 2009 3:08 pm
Forum: Wireless Networking
Topic: MU-MIMO?
Replies: 17
Views: 4863

Re: MU-MIMO?

...
I would recommend in most cases a minimum of 6 meters or more.

Id est one antenna bi-polar is impossible to work properly, right? Even different antennas at 1-2m...
We have problems with interference in such cases. Usually 1.20-1.40m diam. antennas @ 5GHz mimo or not.
by chvdr
Sun Oct 25, 2009 7:54 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

hi fly
I have installed the p2p link but I can't not getting tx/rx rate more than 65 MBit
Can you help me out with your configuration . Because I'm new on N so if you can give me any advise how should I use HT and HT MCS .

thx
Selim

Hi Fly,

who actually is fly?

;-)
by chvdr
Fri Oct 23, 2009 12:32 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

This is not completely true - 11n has other advantages besides multipath - the most important being frame aggregation and block acknowledgement (used even if you have one chain), which ensures more efficent use of medium, therefore, provided that link quality allows the use of 11n rates, throughput...
by chvdr
Wed Oct 21, 2009 10:49 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

Is anyone try to replace 5Ghz turbo link with 802.11n link using only one chain, antenna ? Can I get more bandwidth simple replacing miniPCI card ? Good 5Ghz turbo nstreme link in bandwidth test get 75Mbit in one way UDP test, can be faster only replacing miniPCI card ? Thanks... We do that (replac...
by chvdr
Sat Oct 17, 2009 7:59 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

no, you can use 11b cards...
joke?
by chvdr
Sat Oct 17, 2009 2:53 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

RouterOS 4.1 !!
Changelog mentions nothing about N

Completing n-draft by MikroTik SIA will be a break news in latest news on any tv... So waiting for that you should not reading this forum, just watching tv. Time by time... :-)
:lol:

Peace all,
C.G.
by chvdr
Sat Oct 17, 2009 2:47 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

Hi all, this is only for your information after running a 6 km link in a country side with acceptable bandwidth we tried to establish an 802.11n 2 km-link at the city location as high speed last mile solution. The result is: Unusable. We are not able to get a stable result. The RX levels and the si...
by chvdr
Wed Oct 14, 2009 4:22 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

4.0 is out!! Did you fix nstreme on 802.11n? Did you make any change on 802.11n at all? You should run Nstreme with 802.11abg protocols, with 802.11n currently it's not recommended to use Nstreme. We are working on an entirely new Nstreme version, but it's not implemented in v4, because it's not ma...
by chvdr
Mon Oct 05, 2009 11:36 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

AFAIK there are 2 versions of mars antennas dual pol.. one of them isn't working good because the separation between the two connectors wasn't enough and they were causing interferences... I tested a N link with 2 separated antennas and didn't have enough isolation. Same link with Jirous Antennas w...
by chvdr
Mon Oct 05, 2009 11:30 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

Hello @ all. We are a small wisp in Germany. Im reading for a long time here in the forum. We have problems with N, too. The same Problem as chvdr. Our Equipment at both Sites: RB433AH + R52N + 2*30dBi Mars Antennas Flat Pannel (No DUAL!!) but in Dual-Polarisation (1 * hor + 1 * ver). The 2 Antenna...
by chvdr
Mon Oct 05, 2009 11:24 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

Your problem is most likely a problem of separation between the antennas. Try dual pol antennas with the same setup.. tell us one reason to do that. As I told you before, we have actual link with the same antennas on 5GHz. Bonded cards xr5. Also, we use antennas with different polarization, i.e. on...
by chvdr
Sun Oct 04, 2009 11:34 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 938
Views: 407943

Re: 802.11n

Try to use first only one chain and make the test and get that link stable working at max speed. then enable extended channel support to use 2 20mhz channels and try to get the max speed. After that try the same with the other chain. If everthing works, you can try to enable both chains at the same...
by chvdr
Sat May 30, 2009 12:01 pm
Forum: General
Topic: ros v4beta3 installation problem
Replies: 3
Views: 1615

Re: ros v4beta3 installation problem

oh, I forgot. I use pc with harddisk drive, not cf.
by chvdr
Sat May 30, 2009 12:00 pm
Forum: General
Topic: ros v4beta3 installation problem
Replies: 3
Views: 1615

ros v4beta3 installation problem

hi there!
I have a silly problem: installing newest v4.beta3 without problems. after reboot I receive message "demo expired..." or smt. similar. Computer freezes.
Suggestions?
by chvdr
Fri May 22, 2009 5:35 pm
Forum: Wireless Networking
Topic: mini-pci 802.11n mikrotik
Replies: 28
Views: 6765

Re: mini-pci 802.11n mikrotik

Can we use One antenna on AP side and ONE antenna on client side and use N standard?
the question seems to be a bit silly, but we tested n card with one antenna. it works, but not propertly enought... such as 50% of usual card.
i do not recommend to waste a time to do such tests
by chvdr
Tue May 19, 2009 9:07 am
Forum: Wireless Networking
Topic: mini-pci 802.11n mikrotik
Replies: 28
Views: 6765

Re: mini-pci 802.11n mikrotik

and where did you bought from
by chvdr
Tue May 19, 2009 9:00 am
Forum: Wireless Networking
Topic: mini-pci 802.11n mikrotik
Replies: 28
Views: 6765

Re: mini-pci 802.11n mikrotik

finally something in 802.11n and Mimo Mikrotik
Did you actually tasted it.
by chvdr
Fri Mar 20, 2009 1:05 pm
Forum: General
Topic: v4.0 Feature Request(s)
Replies: 139
Views: 49493

Re: v4.0 Feature Request(s)

i just wonder what about 802.11n
is there any hope...
by chvdr
Fri Mar 20, 2009 12:41 pm
Forum: General
Topic: v4.0 Feature Request(s)
Replies: 139
Views: 49493

Re: v4.0 Feature Request(s)

...
full antenna diversity support for regular 802.11a/b/g mode

full support for 802.11n and WiMax

...

is there some list of supported hardware
by chvdr
Tue Dec 09, 2008 12:05 pm
Forum: Wireless Networking
Topic: 100mbps wireless
Replies: 2
Views: 1397

100mbps wireless

is it possible to use 3, not two interfaces in a p2p link?
by chvdr
Tue Dec 09, 2008 12:02 pm
Forum: Wireless Networking
Topic: 100mbps full duplex
Replies: 6
Views: 3631

Re: 100mbps full duplex

As far as I know bonding does not provide full duplex link. Dual Nstreme link gives you full duplex.
okay. how then to use more than two cards without any bonding here.
several nstreme2- s with load balancing or so?

is it possible to use 3, not two interfaces in a p2p link?
by chvdr
Wed Dec 03, 2008 9:07 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 9
Views: 2965

Re: 802.11n

just a little note here. i am talking about using n-standart not just in a ptmp mode, just for mikrotik support at all. last mile providers need high speed links 'cause adsl and wimax comes too soon. id est the question is "how soon mikrotik users should use high bandwidth wireless". in th...
by chvdr
Wed Dec 03, 2008 8:54 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 9
Views: 2965

Re: 802.11n

Who here is thinking about using 802.11n in a PtMP environment ? ptp/ptmp environment - it doesen't matter... n standart gives more "banwidth-ish" links. it is possible alreagy with linux. but we like to use our lovely mikrotik. what we shall do: -stay and wait mt support (if yes, how lon...
by chvdr
Mon Dec 01, 2008 11:43 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 9
Views: 2965

Re: 802.11n

Who here is thinking about using 802.11n in a PtMP environment ? ptp/ptmp environment - it doesen't matter... n standart gives more "banwidth-ish" links. it is possible alreagy with linux. but we like to use our lovely mikrotik. what we shall do: -stay and wait mt support (if yes, how lon...
by chvdr
Wed Nov 26, 2008 5:30 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 9
Views: 2965

802.11n

hi there!
don't forget, we still waiting for 802.11n standart. linux published ath9k for atheros miniPCI wireless cards, as we well know, included in newest 2.6.27 kernels. i am still not sure how it works, but it works. what about our mikrotik 11n drivers.
by chvdr
Wed Nov 05, 2008 10:53 am
Forum: The Dude
Topic: Using DUDE client on Ubuntu
Replies: 1
Views: 1623

Re: Using DUDE client on Ubuntu

we have similar problem with vectorlinux when Tool->Winbox started, sometimes menu untouchable. menu items does not act as buttons, you cannot click on winbox. at the same time if you start WinBox directly, not by DuDe, there no any probs. winbox/dude were not accessible with oldest version on linux...
by chvdr
Fri Oct 31, 2008 11:29 am
Forum: Wireless Networking
Topic: Nstreme test package
Replies: 119
Views: 41188

Re: Nstreme test package

what about polling interval at 5GHz-turbo. what should it be.
by chvdr
Fri Oct 31, 2008 6:41 am
Forum: Wireless Networking
Topic: wds + nstreme not working. why?
Replies: 2
Views: 1170

Re: wds + nstreme not working. why?

okay, maybe some setting is wrong... i droped that wds and used eoip.
by chvdr
Tue Oct 28, 2008 8:08 am
Forum: Wireless Networking
Topic: how to choose polling or not and what type to use?
Replies: 0
Views: 772

how to choose polling or not and what type to use?

dear friends,
is it any way to know how to use polling and it type?
by chvdr
Tue Oct 28, 2008 8:00 am
Forum: Wireless Networking
Topic: wds + nstreme not working. why?
Replies: 2
Views: 1170

wds + nstreme not working. why?

is it any explanation why wds + nstreme not working.
by chvdr
Tue Oct 28, 2008 7:56 am
Forum: Beginner Basics
Topic: HotSpot Bypass
Replies: 4
Views: 3337

Re: HotSpot Bypass

check documentation for futher explanation
by chvdr
Tue Oct 28, 2008 3:01 am
Forum: Wireless Networking
Topic: repeating wireless signal without wds ?
Replies: 5
Views: 2142

Re: repeating wireless signal without wds ?

it is hard to say i understood well what you trying to do, but did you try eoip?
by chvdr
Tue Oct 28, 2008 2:59 am
Forum: Wireless Networking
Topic: R52H or XR2 or SR2
Replies: 10
Views: 3827

Re: R52H or XR2 or SR2

yeah, sr2 is a good card, maybe the best. works fine with default tx-power.
same with xr2. using these cards we have to use default tx-power, good antennas and 10-15 stations connected to a card maximum.
by chvdr
Wed Sep 17, 2008 4:12 am
Forum: General
Topic: Web Server behind Mikrotik Server
Replies: 15
Views: 11174

Re: Web Server behind Mikrotik Server

regarding the picture, i suppose your webserver shuld be "web server" [192.168.1.101] on it, not "server" [192.168.0.17].
if yes, go ahead, use your mt device as a firewall, use documentation as helper. it's easy.
by chvdr
Tue Sep 16, 2008 7:46 am
Forum: Wireless Networking
Topic: link disconnect ..almost same time everyday..error
Replies: 8
Views: 2791

Re: link disconnect ..almost same time everyday..error

hello,
1. show us wireless configuration: wdses and so on...
2. and what are signal levels both sites
3. what kind of hardware you use... how long w/less cards used.
also you can check cables, but first 1-2-3...

regards,
C.G.,
by chvdr
Tue Aug 05, 2008 5:43 am
Forum: Wireless Networking
Topic: Multiple Exit Points?
Replies: 13
Views: 3236

Re: Multiple Exit Points?

Use additional rb/ros_mt box on the other site of the fiber optics, bond three ifaces on it, where fibers attached.
by chvdr
Wed Jul 30, 2008 9:26 am
Forum: Wireless Networking
Topic: Multiple Exit Points?
Replies: 13
Views: 3236

Re: Multiple Exit Points?

so, i suggest that if: *every rb acts as bridge (ports -ether1, wlan1) *wlan1 in wds mode, ap-bridge each router *all rbs are in one network (with fixed gateway) *the gateway acts as pppoe, dhcp. that culd be other router/linux_server with radius, etc... * id est if we plan to create basic true wds ...
by chvdr
Wed Jul 30, 2008 6:41 am
Forum: Wireless Networking
Topic: Multiple Exit Points?
Replies: 13
Views: 3236

Re: Multiple Exit Points

ap1,ap2,ap3=virtual ap?
by chvdr
Mon Jul 21, 2008 10:30 am
Forum: Wireless Networking
Topic: How many Clients AP can we connect ?
Replies: 18
Views: 6204

Re: How many Clients AP can we connect ?

. . . . . . In 2 years max u will need to deliver 10+ mbits to every one of them...what are u going to do then? If u start cableing now...u can raise their speed without to worry about other wireless APs around u that interference...and so on. . . . there are different considerations of the problem...
by chvdr
Fri Jul 18, 2008 11:32 pm
Forum: Wireless Networking
Topic: How many Clients AP can we connect ?
Replies: 18
Views: 6204

Re: How many Clients AP can we connect ?

Because 802.11 (without any letter) isn't designed for large outdort PtMP installations with lots of 'hidden stations'. This is why a polling protocol is much more effective here. ... therefore, if we looking for а good p2mp network, 1-2km radius arround ap, we have to take heed to keep several sim...
by chvdr
Fri Jul 18, 2008 11:08 pm
Forum: Wireless Networking
Topic: How many Clients AP can we connect ?
Replies: 18
Views: 6204

Re: How many Clients AP can we connect ?

why you insist that nstreme shuld be present
by chvdr
Mon Jul 14, 2008 12:28 am
Forum: Wireless Networking
Topic: -117 Noise floor on XR2 (card not working till reboot)
Replies: 5
Views: 2164

Re: -117 Noise floor on XR2 (card not working till reboot)

bad grounding hurts not only sr2 cards, it destroys all w-less ifaces.
by chvdr
Fri Jul 11, 2008 9:37 am
Forum: Wireless Networking
Topic: MY WLAN IS BLIND ¡¡¡¡¡
Replies: 5
Views: 2038

Re: MY WLAN IS BLIND ¡¡¡¡¡

not only replace the card with new one, same type. use another type manifacturer/trademark-label card
by chvdr
Fri Jul 11, 2008 9:19 am
Forum: Wireless Networking
Topic: -117 Noise floor on XR2 (card not working till reboot)
Replies: 5
Views: 2164

Re: -117 Noise floor on XR2 (card not working till reboot)

hi jo2jo, we had same problem with sr2. we replaced antennas, cables, power supply - nothing. problem we solved after replacing the card. two months till that it still working fine.
by chvdr
Fri Jul 11, 2008 1:51 am
Forum: Wireless Networking
Topic: 2 x 120deg sector of 16 dbi with XR2 MT radio question
Replies: 7
Views: 2365

Re: 2 x 120deg sector of 16 dbi with XR2 MT radio question

i'm affraid, nobody want to answer to your post, 'cause actually distance is not important. not so much. with good equipment it shuld be alright even if antennas are in touch each other...
by chvdr
Fri Jul 11, 2008 1:44 am
Forum: Wireless Networking
Topic: How many Clients AP can we connect ?
Replies: 18
Views: 6204

Re: How many Clients AP can we connect ?

in my opinion, there are no defined limit for number of wireless customers. BUT... in a perfect world. in real situation - we have never seen more than 20 good working customers at one iface attached.
by chvdr
Fri Jul 11, 2008 1:30 am
Forum: Wireless Networking
Topic: attention professional WISPS. What lies in our future?
Replies: 14
Views: 5242

Re: attention professional WISPS. What lies in our future?

Welcome to the club. The situation you have got arrived in germany about two years ago. Sine 16 MBit DSL (Phone+PhoneFlat+16 MBit+Internetflat < 40€) is available we do not work in the "LowBandWidth "-Market anymore. ... ... That's the reason we need a semi-professional equipment. That's ...
by chvdr
Thu Jul 10, 2008 2:13 pm
Forum: Wireless Networking
Topic: New Atheros Mini-PCI cards
Replies: 7
Views: 2719

Re: New Atheros Mini-PCI cards

this has been discussed a lot. 802.11n cards are not supported at all right now. we are working on it.
i'm not sure is that very important or not - to support 802.11n cards
by chvdr
Tue Jul 08, 2008 9:36 am
Forum: Wireless Networking
Topic: simple situation
Replies: 7
Views: 2443

Re: simple situation

You need to disable speeds above 24 megs. Your wireless client and AP will transmit at a lower power rate above 24 megs and cause the problem you are seeing. yes, the problem we are talking about here was solved disabling speeds above 36 mbps. also we limited connections throught firewall to 25/s p...
by chvdr
Mon Jul 07, 2008 12:13 am
Forum: Wireless Networking
Topic: simple situation
Replies: 7
Views: 2443

Re: simple situation

...Be a bit more specific on your power source and what wireless cards you are using.
sr2 in his case
by chvdr
Mon Jul 07, 2008 12:10 am
Forum: Wireless Networking
Topic: simple situation
Replies: 7
Views: 2443

Re: simple situation

When you say signal grows, do you mean it becomes weaker or stronger? Be a bit more specific on your power source and what wireless cards you are using.
grows=weaker
e.g. -76dBm is less than -84dBm
by chvdr
Wed Jul 02, 2008 7:16 am
Forum: General
Topic: license issue
Replies: 8
Views: 1787

Re: license issue

bad luck - it was in hollydays.... ;-)
by chvdr
Tue Jul 01, 2008 12:45 pm
Forum: General
Topic: license issue
Replies: 8
Views: 1787

Re: license issue

every 24 hours we reinstall the device with fresh copy of mt early morning...
hdd we take back to the office, now sitting an waiting...
actually it still working, but device is on the point to die, it sounds terrible, heating, freezing, stopping etc...
by chvdr
Tue Jul 01, 2008 12:38 pm
Forum: General
Topic: license issue
Replies: 8
Views: 1787

Re: license issue

is my furst post not enought, janisk... (i meant "good explanation" from your post)
we can add information about HDD - Western Digital Caviar1170, old as the world is ;-)
btw, 4 days no answer from support... hmm... badluck...
by chvdr
Sun Jun 29, 2008 7:51 am
Forum: General
Topic: license issue
Replies: 8
Views: 1787

Re: license issue

maybe i have to contact support first?
does anybody do that?
by chvdr
Sun Jun 29, 2008 7:45 am
Forum: Wireless Networking
Topic: Installing package with out reboot
Replies: 3
Views: 9061

Re: Installing package with out reboot

i'm affraid, it's not possible. package management /see documentatio n/ needs reboot on first time package installed. in the other hand, restart keeps on 12 SECONDS!!! on CF/RB. i suppose, this is not the biggest disadvantage on the world... why? 1. 12 seconds is a period in wich custommer have no e...
by chvdr
Sat Jun 28, 2008 4:56 pm
Forum: General
Topic: license issue
Replies: 8
Views: 1787

license issue

hi there! we have level 5 ros on pc x86, on HDD. the router is 4 years old, license originally 2.8.xx, now 3.7 updated step by step through the years... after several years faithful service now our HDD is going to die. terrible noise, often stops, restarts and so on are a part of symptoms that predi...
by chvdr
Mon Jun 23, 2008 5:57 pm
Forum: Wireless Networking
Topic: Installing package with out reboot
Replies: 3
Views: 9061

Re: Installing package with out reboot

i can't catch the idea... wuld you explain more recently what actually shuld it be
by chvdr
Thu May 29, 2008 11:37 am
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Re: with money as no object, I need a real MT backhaul solution

Hi chvdr, ...Have you done testing also on enclosure+antenna units? If yes, what hardware did perform better? RB333/433 seems to have crosstalk problems related to thei form factor (miniPCI cards too closer).... Rgds No we have never taste enclosure or antenna units. Just we replace them for search...
by chvdr
Thu May 29, 2008 11:29 am
Forum: General
Topic: Is mikrotik DNS stable?
Replies: 22
Views: 4391

Re: Is mikrotik DNS stable?

This ISP has a good reliable and fast dns resolving, which couldn't be said from the ISP serving my bandwidth. Create your own DNS servers (at least two) to serve fast and reliable resolving, as you wish. Hosting your own domainnames and your own ip-address mangement also requre that. Futhermore, y...
by chvdr
Sun May 25, 2008 12:11 pm
Forum: General
Topic: Is mikrotik DNS stable?
Replies: 22
Views: 4391

Re: Is mikrotik DNS stable?

Seems like a waste to me. Sam Rudy's approach appeals to me. Most subscribers tend to visit the same sites regularly and if the DNS request has to go no further than their CPE it's quick and easy on the network. However despite this I don't utilise the intervening routers for DNS as they're busy en...
by chvdr
Wed May 21, 2008 9:21 am
Forum: General
Topic: Is mikrotik DNS stable?
Replies: 22
Views: 4391

Re: Is mikrotik DNS stable?

Yeah! We already said the same.
by chvdr
Tue May 20, 2008 5:56 pm
Forum: General
Topic: Is mikrotik DNS stable?
Replies: 22
Views: 4391

Re: Is mikrotik DNS stable?

as much as i have used 3.9 version DNS is working properly. sure it working propertly, but... not as a nameserver. moreover, it works as a caching only server. i wonder if it is possible to do rdns, but... "Reverse DNS lookup (Address to Name) of the regular expression entries is not possible....
by chvdr
Tue May 20, 2008 3:54 pm
Forum: Wireless Networking
Topic: Can we make Nstream2 link with one dual polarization antena?
Replies: 9
Views: 3084

Re: Can we make Nstream2 link with one dual polarization antena?

sure? so, what antenna equipment you use?
by chvdr
Tue May 20, 2008 3:51 pm
Forum: General
Topic: Is mikrotik DNS stable?
Replies: 22
Views: 4391

Re: Is mikrotik DNS stable?

and what about oldest versions, e.g. 3.0

allow remote requests: yes
primary dns: 0.0.0.0
secondary dns: 0.0.0.0

is that everything we have to do?
by chvdr
Tue May 20, 2008 9:10 am
Forum: General
Topic: Is mikrotik DNS stable?
Replies: 22
Views: 4391

Re: Is mikrotik DNS stable?

yes, same question in other words...
how to configure (and is it possible) MT box to be nameserver, with authoritative answers only.
by chvdr
Mon May 19, 2008 2:04 pm
Forum: Wireless Networking
Topic: Can we make Nstream2 link with one dual polarization antena?
Replies: 9
Views: 3084

Re: Can we make Nstream2 link with one dual polarization antena?

it is possible, but with worst results. I disagree. We have perfect performance using high quality DP solid parabolics. it is specific to say relatively "perfect performance". depends of what you expect from link... I just want to say that after we replace our high quality BP solid parabo...
by chvdr
Mon May 19, 2008 1:46 pm
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Re: with money as no object, I need a real MT backhaul solution

Could you please post more details chvdr ? Configuration, schemas, frequency used, distnce covered, throughput (TCP) measured, etc.... Thanks, Rgds sorry i'm late with my answer... configuration is most simliest, may be taken from documentation. Devices used are pc amd based most powerful cpu as po...
by chvdr
Wed May 14, 2008 2:50 pm
Forum: Wireless Networking
Topic: Can we make Nstream2 link with one dual polarization antena?
Replies: 9
Views: 3084

Re: Can we make Nstream2 link with one dual polarization antena?

it is possible, but with worst results. better way is to use separate antennas with several meters between antennas. it's 'cause interference. also for better results u can use PC with good CPU.
by chvdr
Wed May 14, 2008 2:43 pm
Forum: Wireless Networking
Topic: Dual link(dual canntena) problem.
Replies: 3
Views: 2461

Re: Dual link(dual canntena) problem.

We have dual link, 0.9km. http://img150.imageshack.us/img150/5/indexphptn0.th.jpg I have measurement cantena and S12(S21) is about -35dB. Frequency is 5080MHz and 6000MHz First we put cards in differents computers. When bouth card doing tx and rx(bandwith test) throughput is 126Mb/s, but when 1 car...
by chvdr
Wed May 14, 2008 2:37 pm
Forum: Wireless Networking
Topic: Somebody just tuned on my frequency...what can do?
Replies: 5
Views: 1941

Re: Somebody just tuned on my frequency...what can do?

how far is your antennas equipment from theirs?
by chvdr
Mon May 12, 2008 5:08 pm
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Re: with money as no object, I need a real MT backhaul solution

To Promind: looking @ your answer, bonding seems to offer better performance than NStreme2, do you suggest to use it instead of NStreme2 ?
...
...
Rdgs
ofcourse, last several comments do say that. days after readings in this forum we replace nstreme2 with bonding in a backhaul... works better.
by chvdr
Fri Apr 25, 2008 8:27 am
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8450

Re: Trouble with link point to point 64km

yes, every time we replace antenna cables and wless cards. i suppose, it is COMPULSORY when you search what is goin' on in same case or related.
by chvdr
Mon Apr 21, 2008 10:25 pm
Forum: General
Topic: Load Balancing - Backup route.
Replies: 7
Views: 3994

Re:

, but my version (2.8.11) doesn't have such extras :-)

Best Regards,
Danail Petrov
new versions offers many, many more functions at all
by chvdr
Wed Apr 09, 2008 3:12 pm
Forum: General
Topic: bgp configuration issue - is there anybody who can help
Replies: 9
Views: 1842

Re: bgp configuration issue - is there anybody who can help

You can use 1 mt box for BGP with 1 ASN and more ISP.
You can use real IP for your client or nat.
1st MT box is attached @ isp1, 2nd - @ isp2. both routers have attached customers on it.
by chvdr
Wed Apr 09, 2008 3:02 pm
Forum: General
Topic: bgp configuration issue - is there anybody who can help
Replies: 9
Views: 1842

Re: bgp configuration issue - is there anybody who can help

Sorry, i didn't get the whole picture - where is the problem? Do you have real IP addresses or do you use masquerade? If real addresses - are you able to route them via both ISPs? Do you need failover? What kind? At this point it looks like standard routing with ECMP route on first router! #yes, we...
by chvdr
Wed Apr 09, 2008 8:59 am
Forum: General
Topic: bgp configuration issue - is there anybody who can help
Replies: 9
Views: 1842

Re: bgp configuration issue - is there anybody who can help

and a bit more. all consultans we use had never heart about mikrotik. we have that configuration, but with cisco for all i know. my idea is to organize and implement that model with mikrotik routers only. futhermore, network with mikrotik routers only. 8) we plan to create small (500 customers there...
by chvdr
Wed Apr 09, 2008 8:36 am
Forum: General
Topic: bgp configuration issue - is there anybody who can help
Replies: 9
Views: 1842

Re: bgp configuration issue - is there anybody who can help

sure, it is not very simple stuff.
after issue completed, i'll make a gift - posting all configs here.
by chvdr
Tue Apr 08, 2008 2:27 pm
Forum: General
Topic: BGP + OSPF default routes
Replies: 6
Views: 1852

Re: BGP + OSPF default routes

ooohh... be sure that everybody from forum admins knows quite enought about BGP+OSPF... i suppose many other people - too... i suppose that they feel that "who uses bgp is at very high level, therefore cannot have any configuration problems". but friends, we decide to use mikrotik for this...
by chvdr
Tue Apr 08, 2008 11:50 am
Forum: General
Topic: BGP + OSPF default routes
Replies: 6
Views: 1852

Re: BGP + OSPF default routes

i'm affraid, here nobody answers to the bgp posts. i posted several 'friendly' questions before. i have troubles with v3.x routers, not with older versions. but still nobody helps.
by chvdr
Tue Apr 08, 2008 11:21 am
Forum: General
Topic: Transparent shaping with Queues for tagged VLAN traffic
Replies: 6
Views: 6184

Re: Transparent shaping with Queues for tagged VLAN traffic

... ... Add VLAN1 to ETH1 and VLAN1 to ETH2 Then create bridge1 and place both VLAN1 ports into bridge 1 then Add VLAN2 to ETH1 and VLAN2 to ETH2 Then create bridge2 and place both VLAN2 ports into bridge 2 VLAN1 to eteher1 and then VLAN1 on ether2? or different VLAN ifaces to ether1 and ether2 wit...
by chvdr
Tue Apr 08, 2008 11:03 am
Forum: General
Topic: two isp connections
Replies: 3
Views: 1166

Re: two isp connections

or bgp implementation, but i personally have troubles with 3.x versions.
futhermore, because wireless drivers are very good in 3.x, i cannot downgrade to lowest version. or in one word, i use two routing tables without bgp because wireless card drivers perfect.
by chvdr
Tue Apr 08, 2008 10:31 am
Forum: General
Topic: bgp configuration issue - is there anybody who can help
Replies: 9
Views: 1842

Re: bgp configuration issue - is there anybody who can help

i looking for a guide. or tutorial. or wiki.
by chvdr
Mon Apr 07, 2008 9:17 am
Forum: General
Topic: Mixing License levels?
Replies: 7
Views: 1796

Re: Mixing License levels?

wispinternet, it is strange if level 4 not enought.
by chvdr
Mon Apr 07, 2008 9:00 am
Forum: Wireless Networking
Topic: small Bandwidth
Replies: 4
Views: 1581

Re: small Bandwidth

try link w/o wds. simply bridge and station.
after all clear and bandwidth tests good - add wds, bridges and so on.
several years before we help friend in a same situation with this plan
by chvdr
Mon Apr 07, 2008 8:51 am
Forum: General
Topic: bgp configuration issue - is there anybody who can help
Replies: 9
Views: 1842

Re: bgp configuration issue - is there anybody who can help

p.s. i forgot... it shuld be bgp configuration with one as
by chvdr
Mon Apr 07, 2008 8:44 am
Forum: General
Topic: bgp configuration issue - is there anybody who can help
Replies: 9
Views: 1842

bgp configuration issue - is there anybody who can help

let us assume simple scheme with two routers, attached to a different isp and one lan with customers.
what we need to do to configuration at all.
exact config - at attached file.
Thanks in advance.
by chvdr
Sat Mar 29, 2008 11:12 pm
Forum: Wireless Networking
Topic: How to transport a vlan
Replies: 10
Views: 13909

Re: How to transport a vlan

take a look at documentation - VLAN, eoip-tunnel and bridge

if doesen't help, write us again
by chvdr
Tue Mar 18, 2008 10:30 pm
Forum: Wireless Networking
Topic: Incompatibility between 2.9.50 and v3.4 wireless?
Replies: 23
Views: 5008

Re: Incompatibility between 2.9.50 and v3.4 wireless?

oh, i forgot... sr9 both sites, x86 PCs@3GHz
by chvdr
Tue Mar 18, 2008 10:27 pm
Forum: Wireless Networking
Topic: Incompatibility between 2.9.50 and v3.4 wireless?
Replies: 23
Views: 5008

Re: Incompatibility between 2.9.50 and v3.4 wireless?

Just an FYI, because I do not know what radio cards you are using. XR9 and SR9 are NOT compatable from what I've read. Yeat thats what i heard to. But some have said that 900mhz is none compatible when mixing ROS versions 3.0 with 2.9.X.. -Jordan we have 900MHz link, v2.9.50 both sites today i upda...
by chvdr
Tue Mar 18, 2008 10:22 am
Forum: Wireless Networking
Topic: simple situation
Replies: 7
Views: 2443

simple situation

Hi, let's asume usual situation with ap and wireless client stations. sometimes, when user starts to upload using bit comet or download master, all signals goes up, ping times grows fataly. limiting connection speed by access-list entries properties doesen't help also / ip firewall filter add chain=...
by chvdr
Sun Mar 16, 2008 9:37 am
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Is it possible with MikoTik - guruz free to feel chalanged ;

I just make bandwidth test, But was unable to achieve better than 50Mbit/sec Full Duplex with real traffic already passing... Something heppend with aligment of antennas I suppose... I will check it. yeah, it's real... that is smt. real. at 50km we have usually 55-60Mbps bandwidth test and 45Mbps r...
by chvdr
Sat Mar 15, 2008 10:45 am
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Re: with money as no object, I need a real MT backhaul solution

Thanks for all the activity fellas. I think I have my question answered for the topic head. Some seem to think with a properly configured setup with this hardware, I should be able to get around 35mbit FD. If I want more, most are saying go with an x86 setup. OK. I am going to start a new thread ca...
by chvdr
Sat Mar 15, 2008 10:36 am
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Re: with money as no object, I need a real MT backhaul solution

You must become an expert with mikrotik to have good results.. We have several links over 80km with dual nstreme with bandwidth 60-64M/60-64M on all installations.. We use 2.9.50 versions for this purpose... All works perfect... You must use x86 systems to achieve better results... Are you sure you...
by chvdr
Thu Mar 13, 2008 2:53 pm
Forum: Scripting
Topic: Email Backup Script worked in 3.3, doesn't in 3.4
Replies: 9
Views: 3380

Re: Email Backup Script worked in 3.3, doesn't in 3.4

None of my scripts from 3.3 works on 3.4... Running the script in a terminal on 3.4 works, running it via the sceduler, it doens't do anything...

I'm about to go back to 3.3
shuld guruz say us what to do...
i upgraded 3.3 to 3.4 - no scripts works from scheduler.
under console - works fine
by chvdr
Thu Mar 13, 2008 11:26 am
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Re: with money as no object, I need a real MT backhaul solution

You must become an expert with mikrotik to have good results.. We have several links over 80km with dual nstreme with bandwidth 60-64M/60-64M on all installations.. We use 2.9.50 versions for this purpose... All works perfect... You must use x86 systems to achieve better results... 80km/60Mbps band...
by chvdr
Thu Mar 13, 2008 11:13 am
Forum: Scripting
Topic: Email Backup Script worked in 3.3, doesn't in 3.4
Replies: 9
Views: 3380

Re: Email Backup Script worked in 3.3, doesn't in 3.4

sorry, it's my fault.
tasted, working, but on 3.3; on 3.4 it have never been tesed by us.
by chvdr
Wed Mar 12, 2008 2:19 pm
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Re: with money as no object, I need a real MT backhaul solution

a -90 noise floor is not a problem for a -60 link - there is 30db difference. If MT had a problem with -90 noise floor then it would be useless...
How find any info about what shuld it be - the difference?
by chvdr
Wed Mar 12, 2008 2:17 pm
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10916

Re: with money as no object, I need a real MT backhaul solution

If you are looking for stability and low latency, consider the Trango 45mbps backhaul or the Alvarion B100. Either one should be up and working in a day, no messing around for a week. i'm affraid, this is a mikrotik forum, jp... if you have some suggestion - please welcome. Now to primary post: I s...
by chvdr
Wed Mar 12, 2008 2:05 pm
Forum: Scripting
Topic: Email Backup Script worked in 3.3, doesn't in 3.4
Replies: 9
Views: 3380

Re: Email Backup Script worked in 3.3, doesn't in 3.4

why don't use wiki's script?
by chvdr
Wed Mar 12, 2008 1:59 pm
Forum: Scripting
Topic: bandwidth control with scripting
Replies: 5
Views: 2288

Re: bandwidth control with scripting

good works, uebi
by chvdr
Sun Mar 09, 2008 9:26 pm
Forum: Beginner Basics
Topic: log says: login failure from user abcde from 222.xxx.xxx f
Replies: 9
Views: 7926

Re: log says: login failure from user abcde from 222.xxx.xxx f

or simply follow wiki firewall...
by chvdr
Sun Mar 09, 2008 6:02 pm
Forum: Beginner Basics
Topic: bridling big amount of customers
Replies: 0
Views: 911

bridling big amount of customers

Hi there! Let us consider big amount of customers (100 or more) behind MT router. One WAN (ether) interface and one LAN interface. Two or tree customer's plans with different amount of traffic. Low class users should use limited amount of traffic, middle - quite more, and high class customers - bigg...
by chvdr
Sun Mar 09, 2008 1:38 am
Forum: Beginner Basics
Topic: Are there books to learn more about ROS
Replies: 7
Views: 2376

Re: Are there books to learn more about ROS

dear friends,
there are two books: [1]. reference manual; [2]. this forum
by chvdr
Wed Mar 05, 2008 10:15 am
Forum: General
Topic: Crash after upgrade 3.3 to 3.4
Replies: 15
Views: 3312

Re: Crash after upgrade 3.3 to 3.4

...i have upgrade mu routeros 3.3 to 3.4 (x86) and boot crash...
any problem with HDD/CF?
by chvdr
Mon Mar 03, 2008 2:34 pm
Forum: General
Topic: spam: help
Replies: 1
Views: 762

Re: spam: help

hello, support told me it is a configuration problem. i don't thing it is a problem on configuration, because router acts as a router 4 years on the same place, in this configuration. of course, firewall rules changed because we are 2 new trusted hosts included. and that's all changes thru the years...
by chvdr
Thu Feb 28, 2008 5:12 pm
Forum: General
Topic: spam: help
Replies: 1
Views: 762

spam: help

hi there! we have a router with a WAN and two LAN ifaces. with given amount of traffic on both LAN interfaces we have twice on WAN.
i suppose it's a spam.
we put standart f-wall, taken from wiki.
what should i do
by chvdr
Wed Feb 27, 2008 5:02 pm
Forum: General
Topic: problem with superchannel
Replies: 2
Views: 1844

Re: problem with superchannel

thus very large, it working on v2.9.48, i.e. you even don't need v3.xx version
by chvdr
Fri Feb 15, 2008 11:20 am
Forum: General
Topic: Web & IP Proxy issue.
Replies: 2
Views: 1105

Re: Web & IP Proxy issue.

upgade to the latest version of mt, try again and if problem persists, write to support with hlp file attached
by chvdr
Thu Feb 14, 2008 4:45 pm
Forum: General
Topic: bridge issue
Replies: 0
Views: 684

bridge issue

hi there!
let us consider router1 with two bridged ifaces: wlan1(LAN, acts as ap-bridge) and ether1(WAN).
futher, router2 have wlan1(WAN), assoc. to wlan1/router1 and ether1(router's2 LAN, station mode). router2 is usual router, no bridges. is it possible to make eoip-tunnel between two routers.
by chvdr
Thu Feb 14, 2008 12:14 am
Forum: Wireless Networking
Topic: 13 mile backbone, questions
Replies: 10
Views: 2449

Re: 13 mile backbone, questions

go ahead, it will be okay
by chvdr
Thu Feb 14, 2008 12:03 am
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8450

Re: Trouble with link point to point 64km

A 2 meter antenna 80 meters up is going to be FUN!!!! - NOT...
it's not "FUN!!!!"... it is possible. believe me. futhermore, originally mushmx said
2 Tower of 60mts high.
... "If you could just lift your Side B to ± 80 meters as " us much more funnest.
by chvdr
Thu Feb 14, 2008 12:01 am
Forum: Wireless Networking
Topic: Great ping.... again
Replies: 18
Views: 4317

Re: Great ping.... again

good idea, but... have you any filters to limit customers packets/connetction per second... every flood/overload makes ping to be bad
by chvdr
Tue Feb 12, 2008 7:50 am
Forum: Wireless Networking
Topic: Sudden loss of all stations
Replies: 6
Views: 1956

Re: Sudden loss of all stations

stop wonderin' what 2 do... vrify signal levels. if poor cpe - replace antenna with bigger one. after that replace interface. of root ap, cpe - next.

if good signal levels and ccq - monitor traffic then. a big goal is to limit packets per second and add good designed queues.
by chvdr
Tue Feb 12, 2008 7:42 am
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8450

Re: Trouble with link point to point 64km

ofcourse, much bigger antenna is an obligation. 64km is serious long distance and good antenna dimension is ab. 2m. and above.

appropos, how bigger is yours? 28dBi is quite little dish... very small.
by chvdr
Tue Feb 12, 2008 7:35 am
Forum: Wireless Networking
Topic: Great ping.... again
Replies: 18
Views: 4317

Re: Great ping.... again

ah... sometimes - huge pings for a while - sound much fine.
ccq and signal levels from other cpe sites?
by chvdr
Thu Feb 07, 2008 11:43 pm
Forum: General
Topic: HotSpot do not redirect to the login page
Replies: 9
Views: 2399

Re: HotSpot do not redirect to the login page

users uses proxy at this moment. and it's manually configured. now we want to separate them from proxy with mtros hotspot included.
by chvdr
Thu Feb 07, 2008 11:39 pm
Forum: Wireless Networking
Topic: stupid traceroute prob
Replies: 4
Views: 1496

Re: stupid traceroute prob

i forgot to tell U that there is a wireless kink betweenmy fouter and customers one.
by chvdr
Wed Feb 06, 2008 11:53 am
Forum: General
Topic: HotSpot do not redirect to the login page
Replies: 9
Views: 2399

Re: HotSpot do not redirect to the login page

aprpos (btw): we talking about network w/o that MT ROS in it. some people wrote proxy settings on browser, but not every users. there are 300 customers. now we want to separate some group (several) with hotspot routers on 2-3 places to decrease broadcast and so on... or in one weord, mt ros shuld be...
by chvdr
Tue Feb 05, 2008 8:36 am
Forum: General
Topic: HotSpot do not redirect to the login page
Replies: 9
Views: 2399

Re: HotSpot do not redirect to the login page

have you ever seen this one working? because this is first scenario we tried. hs initial webpage is not well visible/partially shown and logging impossible.
by chvdr
Mon Feb 04, 2008 10:58 pm
Forum: General
Topic: Web Proxy causes router crash
Replies: 6
Views: 1791

Re: Web Proxy causes router crash

we use dual core processor with webproxy in a small wire network and there no any router crashes. at this moment.
by chvdr
Mon Feb 04, 2008 10:48 pm
Forum: General
Topic: HotSpot do not redirect to the login page
Replies: 9
Views: 2399

Re: HotSpot do not redirect to the login page

any suggestions?
by chvdr
Mon Feb 04, 2008 1:05 pm
Forum: Wireless Networking
Topic: stupid traceroute prob
Replies: 4
Views: 1496

Re: stupid traceroute prob

every traceroute ping seems good, but some loss. the real problem is that this is not my router, it's custommers. and i have no any idea what's goin' on, what's wrong. all our routers does not problems like that. it's first time in my live i see situation like that. and i wondering what shuld be the...
by chvdr
Sun Feb 03, 2008 10:52 pm
Forum: Wireless Networking
Topic: Great ping.... again
Replies: 18
Views: 4317

Re: Great ping.... again

try to do bandwidth test from cpe site, several customers in the same time.
limit the test, e.g. @ 2Mbps and analyse results. use only g.
have to be alright. if tests good. everything else seems to be only custommer's problem.
by chvdr
Sun Feb 03, 2008 10:46 pm
Forum: General
Topic: Block Skype
Replies: 10
Views: 8326

Re: Block Skype

thank you, sergejs,
obviously l7 is the only way to do smt.
by chvdr
Sun Feb 03, 2008 12:16 pm
Forum: General
Topic: HotSpot do not redirect to the login page
Replies: 9
Views: 2399

Re: HotSpot do not redirect to the login page

thank you for your answer. but i culdn't do that... [customer's PC]--------------[HotSpot]-----------[router2+ProxyServer]-----[Internet] the problem persists if customer set up internet explorer to use as a proxy server [Proxy Srever] from diagram above. In this case customer/user cannot be authent...
by chvdr
Thu Jan 31, 2008 8:15 am
Forum: General
Topic: HotSpot do not redirect to the login page
Replies: 9
Views: 2399

HotSpot do not redirect to the login page

hi there!
is it possible to use "outside" proxy server for customers, such as
[customer]-----[HotSpotROS]------[ProxyServer]--------------[Internet]
Problem persist when touching loginpage
by chvdr
Thu Jan 31, 2008 7:34 am
Forum: Wireless Networking
Topic: Great ping.... again
Replies: 18
Views: 4317

Re: Great ping.... again

sometimes we oserved same problems. in this case we
1. replace cables or even connectors.
2. replace antenna root
3. replace ap w/less interface with better one or even with new one
by chvdr
Thu Jan 31, 2008 7:21 am
Forum: Wireless Networking
Topic: Sudden loss of all stations
Replies: 6
Views: 1956

Re: Sudden loss of all stations

verify antenna connectors - possible water penetration

btw, what does it meant that "deaf radio"?
by chvdr
Wed Jan 30, 2008 11:22 pm
Forum: Wireless Networking
Topic: Nstream Quad ?
Replies: 4
Views: 2317

Re: Nstream Quad ?

is it possible to use double polarisation antennas V/H (e.g. http://www.reloadbg.com/snimki/oblu4vatel2.jpg) in nstreme2/quad to reduce number of antennas
by chvdr
Wed Jan 30, 2008 11:15 pm
Forum: Wireless Networking
Topic: Nstream Quad ?
Replies: 4
Views: 2317

Re: Nstream Quad ?

how close can be antennas if xr5 interfaces used in nstreme2/nstreme_quad
by chvdr
Wed Jan 30, 2008 10:47 pm
Forum: Wireless Networking
Topic: stupid traceroute prob
Replies: 4
Views: 1496

stupid traceroute prob

hi there, we found strange problem somewhere arround our router. Every time we traceroute some destination we see some loss at the second hope or smt. strange goes on, such as follows: [user@ROUTER_] > / tool traceroute mikrotik.com ADDRESS STATUS 1 111.222.133.233 24ms 14ms 4ms 2 0.0.0.0 timeout ti...
by chvdr
Thu Jan 17, 2008 8:43 am
Forum: General
Topic: Block Skype
Replies: 10
Views: 8326

Re: Block Skype

how to block these 70%?

we manage a small school network with 80pcs. ros L.6 with hotspot. how to block skype?
by chvdr
Tue Jan 08, 2008 8:27 am
Forum: General
Topic: VPN problem
Replies: 14
Views: 2822

Re: VPN problem

This issue is still unresolved. Anyone else have any thoughts here? I think I need to replace the Routerboard...
Better contact support before replacing anything. All the more that, I have never seen (or heart) about not propertly working Routerboard.

Best regards,
C. G.
by chvdr
Wed Dec 05, 2007 11:17 pm
Forum: Wireless Networking
Topic: HotSpot not redirecting to login page
Replies: 7
Views: 18533

Re: HotSpot not redirecting to login page

hey, guis,
did you implemented that issue at last. because we can't. hs login page does not appeared correctly if customer uses proxy server "behind" HotSpot, i.e.

[customer]-------------[HotSpotROS]-----------[ProxyServer]--------------[Internet]
by chvdr
Wed Dec 05, 2007 12:01 am
Forum: Wireless Networking
Topic: Great ping.... again
Replies: 18
Views: 4317

Re: Great ping.... again

Limit TCP connections to 100... obvious effect is good ping times, but hardly opening webpages (browsing). we tested it before at 120 connections, but because the effect above i removed all filters anywhere... can you share a "good" number of connections to filter - good QoS on the one ha...
by chvdr
Tue Dec 04, 2007 11:54 pm
Forum: Wireless Networking
Topic: Wireless cards for 5.9-6.4 GHz?
Replies: 9
Views: 3551

Re: Wireless cards for 5.9-6.4 GHz?

with converters - okay. but it is possible to use freqs that only persists in superchannel mode -that's the question...
by chvdr
Mon Dec 03, 2007 11:55 pm
Forum: Wireless Networking
Topic: Wireless cards for 5.9-6.4 GHz?
Replies: 9
Views: 3551

Re: Wireless cards for 5.9-6.4 GHz?

You can use this freq with superchannel license, with any atheros chipset

Max

we try that, but we have never link it on these freqs.
i suprechannel mode only available frequenses are visible ones in manually-tx-power mode
by chvdr
Mon Dec 03, 2007 11:46 pm
Forum: Wireless Networking
Topic: Great ping.... again
Replies: 18
Views: 4317

Re: Great ping.... again

i meant what is CCQ, but from CPE site, because this is actually CCQ with such differense of signal levels i offer you 1. to add some more interfaces (with additional antennas, ofcourse), because a client with too weak signal (80 and above) may do the device (ap-bridge) to stop working propertly wit...
by chvdr
Mon Dec 03, 2007 10:34 pm
Forum: Wireless Networking
Topic: Great ping.... again
Replies: 18
Views: 4317

Re: Great ping.... again

what about CCQ and CPE signal levels
by chvdr
Thu Nov 22, 2007 9:17 am
Forum: General
Topic: BROKEN LINK in documentation Attn.: Administrators
Replies: 1
Views: 750

BROKEN LINK in documentation Attn.: Administrators

hello friends,

http://www.nwfusion.com/news/tech/2001/ ... h.html.php cited in documentation, VLAN resourse links is a broken link.


P.S. It's my post No 200... A good reason to celebrate ;-) Cheers!
by chvdr
Mon Nov 19, 2007 10:59 pm
Forum: General
Topic: match vlan traffic
Replies: 14
Views: 2700

Re: match vlan traffic

thank you for your posts, guis, obviously best decision of the issue is vlan with eoip, bridged.

thank you very nuch again
by chvdr
Mon Nov 19, 2007 10:43 pm
Forum: General
Topic: match vlan traffic
Replies: 14
Views: 2700

Re: match vlan traffic

may I say MPLS ...
does ros support mpls? v3?
i'm affraid, no. already discussed in the forum before.
by chvdr
Sun Nov 18, 2007 10:08 pm
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8450

Re: Trouble with link point to point 64km

My wlan card are Mikrotik SR50 (300Mw)

what actually card you used
by chvdr
Sun Nov 18, 2007 7:12 pm
Forum: General
Topic: match vlan traffic
Replies: 14
Views: 2700

Re: match vlan traffic

why not just prioritize traffic from router1 to router3 and vice versa?
so is that enought? and what about router2... can we garantee some bandwidth there?
by chvdr
Sun Nov 18, 2007 7:07 pm
Forum: General
Topic: match vlan traffic
Replies: 14
Views: 2700

Re: match vlan traffic

but what is goin' on "in the middle of the tunnel"... as i wrote above actually we have several routers @router2 ... a tones of connections etc... practically user prioritized @router3, but in case of some overload ping times increases, even packet loss etc.
by chvdr
Sun Nov 18, 2007 12:55 pm
Forum: Wireless Networking
Topic: Wireless Help
Replies: 10
Views: 1990

Re: Wireless Help

did you made some nat at new device?
by chvdr
Sun Nov 18, 2007 12:44 pm
Forum: Wireless Networking
Topic: Trouble with link point to point 64km
Replies: 35
Views: 8450

Re: Trouble with link point to point 64km

hi there!
you can find many posts onto the forum with that treatement. but i think that you have a porblem related to cables, antennas, etc. signal levels <if they perpetual, ofcourse> are quite enought to pass 30Mbps of traffic. we have similar link tx/rx=72/72 with 25Mbps full duplex.
by chvdr
Sun Nov 18, 2007 12:32 pm
Forum: Wireless Networking
Topic: Transparent Bridge Client Config
Replies: 54
Views: 14385

Re: Transparent Bridge Client Config

I have a Senao AP running, clients can connect no hassles (normal Laptops, or other Senao's Bridges) I'm trying to configure a RB133C witha Atheros (AR5212) radio, so that it can be plugged into a switch on the rmeote side, and allow access to all wired PC's to the main network on the AP side. Is i...
by chvdr
Sun Nov 18, 2007 9:19 am
Forum: General
Topic: match vlan traffic
Replies: 14
Views: 2700

Re: match vlan traffic

yeah, probably diagram does not exlplain good as well. both sites router1 and 3 ends with ethernet ifaces. so, on these interfaces have created vlan, eoip and they bridged at last. customer that have to be prioritized is behind router1, i.e. his out interface attached to a switch with interface on r...
by chvdr
Sat Nov 17, 2007 8:38 pm
Forum: General
Topic: match vlan traffic
Replies: 14
Views: 2700

Re: match vlan traffic

is that meant that we can repeat that on many routers "at the tunnel" if we replace router2 with a track of routers.
yep, it is

but... you may try EoIP tunnel between router1 and 3, and bridge vlans with EoIP


yes, they bridged. see above
by chvdr
Sat Nov 17, 2007 6:09 pm
Forum: General
Topic: match vlan traffic
Replies: 14
Views: 2700

Re: match vlan traffic

in general, you should not break the VLAN and bridge it with other interfaces. i think, on router1, you should add vlanid=333 on interface connected to router2, bridge both vlan interfaces. then do it on router2/3. and then you can limit traffic on different interfaces on router2 =) is that meant t...
by chvdr
Sat Nov 17, 2007 2:18 pm
Forum: General
Topic: match vlan traffic
Replies: 14
Views: 2700

match vlan traffic

hi there! I apologise if post already treated. I have a simple problem. How to prioritize vlan traffic "in the middle" of the tunnel. Let asume issue such as follows: ------eoip-tunnel1 eoip-tunnel1-------- Router1--------Router2------Router3 --->Internet ------VLAN(id=333) | VLAN(id=333)-...
by chvdr
Fri Oct 12, 2007 10:36 pm
Forum: General
Topic: 3 nics 2 public ips
Replies: 2
Views: 971

Re: 3 nics 2 public ips

i currently have 2 nics 1 public interface 1 private interface now i need to add another nic which will have public ip... so i want to have 1 nic whith private nat generated address and 2 nics (190.x.x.18-190.x.x.19) .18 for internet browsing .19 for voip please help me out with config.. yes, wiki ...
by chvdr
Thu Oct 11, 2007 8:49 am
Forum: General
Topic: VPN problem
Replies: 14
Views: 2822

Re: VPN problem

check "/ ip firewall service-port pr" pptp should be enabled both sites.

or firewall stopped smt. I have never ping nothing when I do some vpn. It just run and works.
I can't recommend you nothing else different.

Re,
C. G.
by chvdr
Wed Oct 10, 2007 9:32 am
Forum: General
Topic: Rate limiting subnet with fixed per user bandwidth
Replies: 11
Views: 4810

Re: Rate limiting subnet with fixed per user bandwidth

tung,

adresa ime eshte:

fatonkurteshi@yahoo.com

pershendetje

fatoni

Dear fatonk,
I personally prefer french. But everybody in this forum uses english. Is it possible to repeat your post, in english this time.
apolog., it's in principle, nothing person. in that message.
C. G.
by chvdr
Wed Oct 10, 2007 9:22 am
Forum: General
Topic: Rate limiting subnet with fixed per user bandwidth
Replies: 11
Views: 4810

Re: Rate limiting subnet with fixed per user bandwidth

Hi all, I'm trying to rate limit my customers to 512k/128k no more or less. I tried different setups for queues including pcq's for uploads and downloads separately. If I apply queue to a subnet address, 192.168.0.0/24, it shares bandwidth evenly between all users in that subnet, e.g. if i rate lim...
by chvdr
Wed Oct 10, 2007 9:00 am
Forum: General
Topic: VPN problem
Replies: 14
Views: 2822

Re: VPN problem

Disabling any static routes and firewall rules does not resolve the issue. All routes are dynamically created routes. WAN IP is gathered from DHCP and DHCP adds default route, dynamically. WAN IP: a.a.a.a WAN gateway: a.a.a.b LAN IP: 192.168.1.1 Looks like this: 0.0.0.0/0 routes to a.a.a.b a.a.a.0/...
by chvdr
Mon Sep 24, 2007 10:22 am
Forum: Wireless Networking
Topic: Nsteme2 mystery
Replies: 2
Views: 1172

Re: Nsteme2 mystery

nstreme2 makes two cards to work in a different channels or even bands. and it is normal tx rate on test to be quite different than rx rate. futhermore, it is normal to see different values on bandwidth test in different directioons (transmit/receive/both). Yesterday we made tests on a new cards ath...
by chvdr
Mon Sep 17, 2007 2:17 pm
Forum: Wireless Networking
Topic: Nstream dual?
Replies: 7
Views: 2240

Re: Nstream dual?

yes, joie,

mikrotik documentation contains much more you need to set it up.
by chvdr
Sat Sep 01, 2007 9:22 am
Forum: Wireless Networking
Topic: CPE-Antenna alignment via customer / Application available?
Replies: 149
Views: 42839

Re: CPE-Antenna alignment via customer / Application available?

Yes - but I would need your e-mail address to send it to you ;-)

Either post here or write to info <at> cmit <dot> de

Best regards,
Christian Meis
abuse[at]chirpan[dot]com

thanks,
C. G.
by chvdr
Sat Sep 01, 2007 9:03 am
Forum: Wireless Networking
Topic: Problems with uploading
Replies: 1
Views: 857

Re: Problems with uploading

replace cable @ that client. we have similar situations many times. obvious reason is bad N-conn or cable connection.

hope that helps

regards,
C. G.
by chvdr
Sun Aug 19, 2007 10:28 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

hello, I supposed this 30-40 Mbps is half duplex, am i right? (tcp or udp?) I tested the above config in table, but im getting asymmetric 4-5/27-30 Mbit tcp traffic, i cant figure out why could be this happened. i have a plan, as i build a pair of wireless bridges from 2.5 GHz P4 PC's, with 2-2 R52...
by chvdr
Sun Jul 29, 2007 10:08 pm
Forum: Wireless Networking
Topic: WDS infraestructure: help appreciated
Replies: 4
Views: 1332

Re: WDS infraestructure: help appreciated

and what bandwidth you planned 4 users
by chvdr
Wed Jul 25, 2007 12:18 pm
Forum: Wireless Networking
Topic: My hotspot and wireless c;ients are too slow.
Replies: 3
Views: 1219

Re: My hotspot and wireless c;ients are too slow.

*you may use omnis with different polarisation
*try to change frequency to more different channels

regards,
C. G.
by chvdr
Wed Jul 11, 2007 6:39 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

yeah,
but for us 20Mbps is not a successful story at least.
30-40Megabits link is normal...
everything else shuld be made more professionaly ;-)
regards,
C. G.
by chvdr
Wed Jul 11, 2007 4:48 pm
Forum: Wireless Networking
Topic: NLOS
Replies: 8
Views: 2466

Re: NLOS

i wonder is sr3 work fine on NLOS... or even 50% NLOS
by chvdr
Wed Jul 11, 2007 4:40 pm
Forum: Wireless Networking
Topic: NLOS
Replies: 8
Views: 2466

Re: NLOS

If you can get 2.4GHz to connect reliably, it is *much* cheaper than 900MHz. we always use only sr2/xr2 @2.4GHz, sr9 is not quite expensive than sr2/xr2... we used sr9 before in absolutely NLOS successfully, but i'm afraid there is no possible to pass much bandwidth on 900MHz. i am interested to tr...
by chvdr
Wed Jul 11, 2007 1:15 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

so, it's ain't easy... use rb112 with r52. you can put two cards in dual nstreme. perfect... we have try and resieve nice result. but as far as 50km we have never try r52. at these distances we use sr5 and xr5 only. just one of these cards can work in an rb112, therefore you can try with 2xr52 in a ...
by chvdr
Tue Jul 10, 2007 12:06 pm
Forum: Wireless Networking
Topic: NLOS
Replies: 8
Views: 2466

Re: NLOS

Well you have sevaral options: Run 2.4ghz at 1/4 spectrum (5mhz) = 3dbm increase .... punches through trees pretty well. ?! Use 900Mhz gear, specifically the sr9 card made by ubiquiti networks. .... best solution and works real well. The only drawback is the noise exhibited in the 900Mhz band... fo...
by chvdr
Tue Jul 10, 2007 11:30 am
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

Unfortunately, I can't use the RB532 in my country, because it haven't the CE marking.
what actually is problem to use 532. i really do not understood what's the CE marking in your country. culd you explain more recently.
regards,
C. G.
by chvdr
Mon Jul 09, 2007 6:57 pm
Forum: Wireless Networking
Topic: strange drop of packets, "/ system reboot" solving problem
Replies: 1
Views: 825

strange drop of packets, "/ system reboot" solving problem

hi everybody, sometimes a router do such as follows: 192.168.0.12 64 byte ping: ttl=64 time=3 ms packet reject packet reject packet reject 192.168.0.12 64 byte ping: ttl=64 time=1 ms 192.168.0.12 64 byte ping: ttl=64 time=1 ms 192.168.0.12 64 byte ping: ttl=64 time=1 ms 192.168.0.12 64 byte ping: tt...
by chvdr
Mon Jul 09, 2007 2:20 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

i want to tell you that we have never use that lmr900
we always use lmr400
computer in a big metal case wallmounted so close as possible to antenna with maximum 2-3m lmr400, that's all secrets we have... you have to pass 30 or 40 mbits, depends of quality of link, line of site clearness etc.
by chvdr
Mon Jul 09, 2007 2:14 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

Unfortunately, I can't use the RB532 in my country, because it haven't the CE marking. The system I'd like to build must be able to sustain at least 24 Mb/s (40 Mb/s would be better). Perhaps, if I used the frequency of 2.4 GHz (turbo mode), I would solve my problem, but I'm not sure of it. On the ...
by chvdr
Sat Jul 07, 2007 11:54 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

Well, if you can find me a PC that i can feed over PoE and put 50 meters up in the air then i might consider. There's a reason why we use Routerboards... one of them is that they are quite well performing and they fit in small boxes with passive cooling. /Henrik it's your choise - 50 meters Poe or ...
by chvdr
Sat Jul 07, 2007 10:24 am
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

Nope, RB133C only have one MiniPCI slot. Also you should go for RB532A if you want more than 15-20Mbit UDP on the board. /Henrik You're right... I fixed the error. What can you say to me about RB133 when is used in a scenario like above? i wuld use PC, not routerboard. P43GHz+/256/CF is a good conf...
by chvdr
Fri Jul 06, 2007 8:42 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

AFAIK the limit is the CPU, it's too powerless to handle more throughtput, so if you put 2 cards, you'll get the same speed over 2 of them I don't know if I have understood... One R52 = about 20 Mbps Two R52 (nstreme2 enabled) = about 20 Mbps instead of 40 Mbps? Is that what you meant? Regards. it'...
by chvdr
Tue Jul 03, 2007 5:55 pm
Forum: Wireless Networking
Topic: To double data transfer rate with a couple of R52
Replies: 26
Views: 4637

Re: To double data transfer rate with a couple of R52

Dear Sirs, In the following system: RB133 with RouterOS and two R52 (5 GHz) is it possible to use wireless cards at the same time in order to increase data transfer rate (about 40 Mbps instead of 15-20 Mbps)? Regards. see nstreme2. in documentation. you can also make bonding, but we usually prefere...
by chvdr
Sun Jul 01, 2007 9:44 am
Forum: Wireless Networking
Topic: misteriously happends randomply... SOLVED!
Replies: 5
Views: 1700

Re: misteriously happends randomply... SOLVED!

sure, we have...
dishes 1,5m both sites, signal level between 52 and 83!!! working fine with levels under 80, but... we need 30Mbit link and sometimes smt. goes wrong. i still have no any idea what's going on.
regards,
C. G.
by chvdr
Thu Jun 28, 2007 1:07 pm
Forum: Wireless Networking
Topic: misteriously happends randomply... SOLVED!
Replies: 5
Views: 1700

Re: misteriously happends randomply... SOLVED!

What was the actual problem? the problem is that nobody in this forum can help you in problems like that... or ain't nobody want to help you. now seriously: big noise arround ap. on frequency quite different from our. problem solved with bigger dishes, sr5 replaced with xr5 and nstreme removed from...
by chvdr
Tue Jun 26, 2007 10:53 pm
Forum: Wireless Networking
Topic: misteriously happends randomply... SOLVED!
Replies: 5
Views: 1700

misteriously happends randomply... SOLVED!

xr5 vs. sr5. 42km distance, 37Mbps bandwidth test, usually good signal levels, everything works fine, but several times dayly for 10 minutes we have logs such as follows: ===========AP-site================ 04:07:17 wireless,debug wlan1: 00:15:6D:XX:XX:XX attempts to connect 04:07:17 wireless,debug w...
by chvdr
Mon Jun 25, 2007 11:37 pm
Forum: Wireless Networking
Topic: Equipment and setting for 300m Link lot of bw
Replies: 5
Views: 1922

Re:

for nstreme you need at least 1 ghz system
we have 500m link with PII/400MHz secondpards... works fine @30-37Mbps and max. 50% cpu usage.
but long range links we have never try with rb or even lower than 1GHz systems.

regards,
C. G.
by chvdr
Wed Jun 20, 2007 1:20 pm
Forum: Beginner Basics
Topic: help config 2 AP
Replies: 2
Views: 2245

Re: help config 2 AP

hello i need config this scenario. Station and bridge ap-bridge but no works. Have any other option?
Please help Thanks!


consult documentation, "transparently bridging networks... " on wiki and if you don't find answer, explain here again

regards,
C. G.
by chvdr
Wed Jun 20, 2007 1:17 pm
Forum: Beginner Basics
Topic: help me please
Replies: 2
Views: 2152

Re: help me please

first, you need to upgrade to the latest version :)

why? many senao cards works fine with all versions.

so, what kind of problems did you have, valens?

regards,
C. G.
by chvdr
Wed Jun 20, 2007 1:05 pm
Forum: Beginner Basics
Topic: Explain please about MASQUERADE and Bandwidth limit
Replies: 3
Views: 3008

Re: Explain please about MASQUERADE and Bandwidth limit

When using masquerading, you have to mark the outgoing connection with new-connection-mark and take the mark-connection action. When it is done, you can mark all packets which belong to this connection with the new-packet-mark and use the mark-packet action. Please explain me why we have to mark pa...
by chvdr
Sat May 12, 2007 2:47 am
Forum: General
Topic: need help ubuntu user.....
Replies: 16
Views: 3665

hello there, i have similar problem like that wine works fine with every win program. just if i start winbox or dude application starts and several seconds after freezes and forces to quit. i am not sure that this is an ubuntu problem. or wine problem. we threated previously that problem into the fo...
  • 1
  • 2