As there is no 89.19.xxx.xxx IP address configured on the local interface, you are not able to set it for /ip hotspot user. There should be address from 192.168.244.1 network in /ip hotspot user. Thanks again for your support! Will this mean that for example in case that I assign to the bridge wher...
LambdaMaxWELL, what is the IP address configured on HotSpot interface? What is the IP address configured at /ip hotspot user? Thanks for coming back to my issue. I configured a private address for the hotspot interface (192.168.244.1) via the hotspot setup and I also configured a static ip (the sam...
For the one-to-one NAT. /ip hotspot user profile set <used_profile> address-pool=none to disable One-to-One NAT for authorized clients. /ip hotspot set <used_server> address-pool=none to disable One-to-One NAT for unauthorized clients. To block any user except from the specific subnet, use ip-bindi...
not sure about that, why do you need this? I am happy also with the initial version. But if I would take the current IP directly out of the database or if I could directly request the dyndns.org mailserver than I would get the really currently address - device independent. Otherwise it could be tha...
Hello ALL, I have built-up an EoIP tunnel through my MT network. My firewall will get internet access via cable using dhcp through this tunnel. Basically this works fine. But when I replace the EoIP tunnel with a vpls tunnel I do not have access to every website. Browser will get connection to the w...
Hello ALL, my MT OSPF routed backbone is running well and basically there is not problem. Within my OSPF cloud I whant to connect a customer private network. This network should be masqueraded and tunneled to my central firewall to offer internet access. This is working fine as long as I route the t...