MikroTik

linuxciscodaniel

hello,
if you active your proxy
go to dns setting put the public dns because the proxy of mikrotik use the mikrotik for resolve the request
et your end users must to have the mikrotik lan ip for the resolve them request
but before do a update to the last version package
BR

linuxciscodaniel

hello, thanks for your reply, i don't have the logs, but when i do "system resource usb print " i see my device connected but i can see that in the /System/Disks first i have format my disk Segate to the fat32, this format before to connect to the mikrotik it is ok?? waiting your reply Bes...

linuxciscodaniel

Hello all i have my mikrotik RB2011 with ip x.x.x.x i have connected i storage Seagate expansion for the cache on disk web proxy but i have a issue the disk not recognized by the mikrotik before to connect the disk to mikrotik, i have - formated that to fat32 format - add system routerboard usb set ...

linuxciscodaniel

Hello support, i am setting a configuration one squid, mikrotik and local network (ip squid 192.168.200.1/24) Ip mikrotik connected to SQUID 192.168.200.1/24 IP mikrotik connecte to lan 192.168.100.1/24 WAN= 41.41.41.1 i have configured my mikrotik with /ip firewall mangle add chain=prerouting proto...

linuxciscodaniel

thanks for your reply

what is the ip range of yahoo
and how can i route this ??
regards

linuxciscodaniel

Hello all i can't open the yahoo page behind the mikrotik i have put this command / ip firewall mangle add chain=forward protocol=tcp tcp-flags=syn tcp-mss=1361-65535 action=change-mss new-mss=1360 disabled=no but behind my mikrotik, the customers have always the problem for open the yahoo mail, i d...

linuxciscodaniel

Hello All i have put this command / ip firewall mangle add chain=forward protocol=tcp tcp-flags=syn tcp-mss=1361-65535 action=change-mss new-mss=1360 disabled=no but behind my mikrotik, the customers have always the problem for open the yahoo mail, please how can i resolv this issue of open yahoo we...

linuxciscodaniel

i have setup a mikrotik OS 3.22 in the Desktop, and i want to connect my nanostation2 (2.4) for do the Point to multipoint with the customers that use the laptop with the wifi connexion

how can i do that please ??

thanks

linuxciscodaniel

Hello ALL
i have a mikrotik with a nanostation2 antena, i want to setup that,
I want to know how can i setup my mikrotik if my antenna work in mode AP to distribute the connection to the customers who have their laptop

please i wait your reply

Thanks

linuxciscodaniel

please I want to know what makes exactly this command

/ ip firewall mangle add chain=forward protocol=tcp tcp-flags=syn tcp-mss=1361-65535 action=change-mss new-mss=1360 disabled=no

linuxciscodaniel

ok, let me try

thanks

linuxciscodaniel

i don't use de web proxy
just when i open the page, i receive, i can't connecte to to link yahoo or facebook
i want to know if mikrotik have the problem with the mtu for some web site ??

linuxciscodaniel

Hello i have a problem, my customers behind the mikrotik can't open the yahoo page and facebook page only, i don't know why, but i think that my issue is the MTU, the default MTU in my mikrotik is 1500 i use routerboard 700 with one interface wan and one interface lan please somebody can help me ???...

linuxciscodaniel

OK, thanks for your reply

linuxciscodaniel

Hello all

i have a mikrotik RB1000
i have setup with a ip adress public in the interface wan et the mikrotik work corectly, now i want to add a second adress in the interface wan because i want use two public address in the interface.

how can i do that please

thanks for your reply

linuxciscodaniel

ok, thanks for your reply

linuxciscodaniel

Please
That would mean that the sign with D would mean that the address ip was fixed to the machine??

linuxciscodaniel

Hello all

In Winbox, when I go to IP-->hotspt-->Hosts
in the first column (Flags), there is letters such as D,H
That mean these two signs D, H and
And at which moment we have these signs

thanks

linuxciscodaniel

i have add this rules in ip/firewall/nat router
chain=dstnat action=dst-nat to-addresses=192.168.100.199 to-ports=0-65535
protocol=udp dst-address=X.X.X.X

et my call is ok now behind my mikrotik, but i want to know if it is bad configuration??

X.X.X.X=my ip public

linuxciscodaniel

Hell all

i have a mikrotik 433AH with winbox 5.0, i have setup portaone système voip behind my mikrotik, when i make a call towards
long call, i don't receive de ring, but the phone of destinaire ringing, i think that it is the problem of NAT transversal.
pleanse some body can help me

Thanks

linuxciscodaniel

Hello All I have a system portaone which has a server)radius, normally it works with Mikrotik I would like to know if somebody has already integrated the system portaone with the mikrotik route Because I am blocked at the moment, my authenticatoin between the portaone and mikrotik don't work while m...

linuxciscodaniel

Hello to all I have a routerBoard 433AH with 2 providers IPS and a LAN Isp1 on the interface 1, ISP2 on the interface 2 and LAN on the interface 3 I would like to make that the traffic are sent to the gateway of my ISP that have the best time of response Which protocol have to I use and how I have t...

linuxciscodaniel

Hello

please

in this link the equal bandwith betwen users is static

i have need the dynamic equal bandwitch users

thanks for your help

linuxciscodaniel

Hello All
Please

how can i use pcq with global in and global out forthe equal bandtwith between users

thanks

linuxciscodaniel

OK, Thanks for your reply and your help Then i want to know if i have a mikrotik routerboard 433AH with a LAN=192.168.10.0/24 , and a WLAN=192.168.30.0/24 and WAN=41.223.X.X/30 this configuration for aqual bandwith with 2 local interface (local and wireless local) and one public interface (WAN) /* M...

linuxciscodaniel

Hello All I'm doing the QOS using the PCQ but now I have two interfaces Local, a LAN (192.168.10.0/24) and another wireless Wlan (192.168.20.0/24). for a single interface lan Applying this rule queue tree add parent=Lan queue=pcq-download packet-mark=users I want to know if I can have two parents fo...

linuxciscodaniel

Ok, thanks for your reply

linuxciscodaniel

The problem is that I have several customers behind the wireless router that must authenticate in Mikrotik, Mikrotik knows just the mac address of the wan port of the wireless router but do not know the mac of desktop behind the wireless router that's what I'm talking and how to do as soon as a cust...

linuxciscodaniel

I want to do with authentication, I want to put the WiFi router's WAN interface in the network
Local and allow the mac address of wan router wifi in the router Mikrotik
and after that will allow customers to connect wireless to authenticate using the account created in the Mikrotik

linuxciscodaniel

Hello All I have a Mikrotik installed on a desktop with two network cards a card for the LAN and one for the WAN I would also make the WIFI so I have a DLINK WIFI router that I want to install in my network to the WLAN and make a Authentication using the Mikrotik hostpot Thanks for your prompt respo...

linuxciscodaniel

Hello ALL

i have a network with a mikrotik hostpost, i want to know how can i block the mac spoofing attack, because i have a customers who take a mac address of other customers

Please can you help me

thanks

linuxciscodaniel

ok, thanks

linuxciscodaniel

ok, thank you for the method but I had already found another method with Schudel, by creating a rule in ip-binding and each time I want the client have no connection I turn off just in ip-binding
is this also a good configuraiton

linuxciscodaniel

Hello, I would like how I can do to have Internet at certain times
I have a machine with a specific mac address, I would like this machine have internet

to 8hrs to 12hrs and 17:30 to 22hrs00, how do here?

Thank you for your prompt response

linuxciscodaniel

I changed the card I placed the card R52 and the range is better, thus I think that the card R52n which I used was can be not good for Routerboard 433

now i have the CCQ=100%

thanks all

linuxciscodaniel

for the moment the laptop of customers don't support the n
the range is very bad

i have change my antenna and my pigail

linuxciscodaniel

ok now i have this information in my wireless configuration

Overall tx CCQ=50 %
Noise floor =-121dbm
Frequence=2.4ghz B
Ack timeout= 27us

this information is good?

With the CCQ=50% the range must be good ??

Thanks for you reply

linuxciscodaniel

thanks,
my CCQ is idem after the change
how can check my antenna?

linuxciscodaniel

thanks for your help, ma version of routerboardOS is 4.13
but after the change,my CCA is always 5%, i think that this value is note good
my routerboard is 433
what can i do to correct this issue?

Thanks

linuxciscodaniel

for the frequence, yes i have do that, but any change

linuxciscodaniel

ok the country is cameroon in Africa
i have just use the frequence mode=manuel txpower

it is bad ??

linuxciscodaniel

i have setup me antenna 15 dbi with my mikrotik card R52n, but i don't why my range is very bad the range is not good it is very bad and QCC is 5%, I do not know if it's a configuration problem because before I had the same equipment with a card R52 but the range was even better. may be a configurat...

linuxciscodaniel

thanks

linuxciscodaniel

please can you explain me exactly LOS and what is her importance?

linuxciscodaniel

Thanks for your reply
what is LOS ?

and i want to known

How to increase the range of the signal with my equipments?
And which is the best configuration to have a good range

Thanks.

linuxciscodaniel

Hello all I have a problem I need to install using a 15dbi omni antenna, card Mikrotik RouterBoard 433A and atheros wifi card R52n I would like to know what is the theoretical range of my antenna with all this equipment. I would also like to know if I configure the nstreme in my system is what it ca...

linuxciscodaniel

Hello ALL I have a map 433AH, I reset the configuration of my card and just after I can no longer log into my card from the winbox tools and even using the connection method with a serial cable, I there still can not, I'm seeing my network adapter on the Mikrotik that flashes when I plug the etherne...

linuxciscodaniel

i want to do that dynamicaly

linuxciscodaniel

No, it's a mistake if I posted this in the user-manager forum I want it done a dynamically from my Mikrotik. my ISP gives me a band pass 512K/512K download a lot and my clients with IDM (internet download manager) and http downlaod and saturates the bandwidth, so I would like how every time it start...

linuxciscodaniel

Hello ALL

I have a 433AH Mikrotik with 10 customers that traffic behind Mikrotik
and some clients launch download saturating the bandwidth
I wish that no machine is over 512K when a client is working on it
how could I make

tHANKS for your reponse

linuxciscodaniel

Hello ALL I can not reset my card, even when using winbox, I detected no mac address of my cart routerboard 433AH, I do not know how to reset a serial cable, someone he could 'm help, should I use a crossover serial cable. and the reset routerboard with the hold metal object don't work Please help m...

linuxciscodaniel

Hello all I have a Mikrotik RB433AH with a wan interface, LAN interface and WLAN interface, I would like to make QOS and QOS that I want when my user surpassed the bandwidth defined by uphill and downhill, it soon descends on the bandwidth configured for him. For example each of my machine does not ...

linuxciscodaniel

Hello all I have a Mikrotik RB433AH with a wan interface, LAN interface and WLAN interface, I would like to make QOS and QOS that I want when my user surpassed the bandwidth defined by uphill and downhill, it soon descends on the bandwidth configured for him. For example each of my machine does not ...

linuxciscodaniel

Hello all
i want to configure my routerborad 433AH with a script, how can i write this script

i want to write all line command in the script and load this script for all installation of my mikrotik

i waiting your reply please

THANKS

linuxciscodaniel

Hello All I have un Mikrotik RouterOS433 with usermananger, i have update my RouterOS 4.6 to 5.0beta but with usermanager 4.6 i have the report option, then with the usermanager 5.0beta i don't see the report I want to know how can i do for to have the repport in my usermanager 5.0beta Thanks for yo...

linuxciscodaniel

Hello all

I have a mikrotik ROUTERBOARD 433AH,
I need a best pratice for the restristion of p2p and bittorent in my routerboard

Please can you propose my the example configuration

Thanks and sorry for my bad english

linuxciscodaniel

Hello

I use usermanager with my Router0S 4.6

My usermanager is configured correctly but i d'ont receive the repport in my usermanager

but in log mikrotik i receive this message "Request RADIUS ACCOUNT no response, no send

what is the problem

Thanks

linuxciscodaniel

can i have a example for the restriction fo P2P with the queue ?

Thanks

linuxciscodaniel

Hello All

I have configuration wifi with a antenna with 15dbi with a a Wireless (Atheros AR5213) with the 4.6 routerOS
but my wifi give Just the signal throught 100

i want the best configuration for the wifi in mode AP bridge

Thanks for your response

linuxciscodaniel

Hello all

I have a serious problem with my wifi customers about the download by p2p, bittorent, http download

i want to know how can i reduce the bandwith of P2P, bittorent and http download of my wifi customer in my Mikrotik

Thanks for you response

linuxciscodaniel

when i type that i receive this response [admin@NETLINK] > ping [:resolve www.google.fr] 66.102.9.104 64 byte ping: ttl=48 time=148 ms 66.102.9.104 64 byte ping: ttl=48 time=155 ms 66.102.9.104 64 byte ping: ttl=48 time=146 ms 66.102.9.104 64 byte ping: ttl=48 time=149 ms 66.102.9.104 64 byte ping: ...

linuxciscodaniel

Hello I have a mikrotik with 4.6 OS when i ping the www.google.fr in the mikrotik, i receive [admin@NETLINK] > ping www.google.fr invalid value for argument address but i don't know why then the ping in www.yahoo.fr is reacheable Can you help me about this problème of unruncheable of www.google.fr T...

linuxciscodaniel

ok thanks

linuxciscodaniel

ok it work
but i have a problem

the radius server is external but i can't use my radius server because i receive correctly the authentification page but when i enter my username et password i don't receive the reply

how can i do this issue with my radius server when i use the external page login

linuxciscodaniel

Hello I have a problem with the repport of usermanager I use the usermanager 4.6 in my router RB433 When I configure all the usermanager which works well, I do not manage to have the information of repport Nothing displays I do not know if the usermanager 4.6 has a but or it is a problem of configur...

linuxciscodaniel

ok thanks for your help

linuxciscodaniel

Excuse me for my bad english

i want to redirect the login page to External server.
i want use the hotspot with the hotspot directory of Files option to external server web
how can do for that?

what file can i modify ?

Thanks advance for your help

linuxciscodaniel

Excuse me for my bad english

i want to redirect the login page to External server.
i want use the hotspot with the hotspot directory of Files option to external server web
how can do for that?

what file can i modify ?

Thanks advance for your help

linuxciscodaniel

Hello I have a tftp and http server with the directory hotspot with all file (login.html, status.html, redirect.html .... etc) I want setup the hotpsot , when the customer receive the page of login i want that the mikrotik loading this page by the server tftp and http excuses me for my poor english ...

linuxciscodaniel

thanks for all

linuxciscodaniel

I have a problem with my usermanager 4.6 when i create a user with for example 1hour of connexion time, when i disable the session of this user, her time continuous to deduct some body can help me ? what is the problem with the session in the usermanager 4.6 i can't disable de active session of user...

linuxciscodaniel

Hello
i am Daniel i use the usermanager of mikrotik but when my user use one party of her ticket after when the same user came for to finish the time of her ticket the Left is 0s and my use can't connect him
please what is the problem ?

Thanks

linuxciscodaniel

Hello Mister I am Daniel from Cameroon, I have a router MIKROTIK RouterBOARD 433AH, and I have a server radius BSDradius and I want to use the card system for the authentication of my customer, but I want do the authentication just with the PIN, I want two question MIKROTIK can do this authenticatio...

Search found 73 matches