Thank you,
its a squid proxy, set in ipfire, and yes, I mean router's access to internet should be made via proxy.

Best regards

Kostas

Hello,

How can I set my WAN access to be via proxy?

Best regards

K

Will try it on the actual scenario, and if no other issues occur, I will mark the thread as solved.

Best regards

K

Thank you, yes I got that this is an example. In my case, I need a Unifi access point to assign DHCP addresses from the LAN pool (192.168.88.x), but to be able to check on the UniFi controller residing on WAN network (192.168.0.x). So, I added this: chain=dstnat action=accept to-addresses=192.168.88...

Thank you, both.
Dmitris, you mention one IP: 192.168.88.100, which one is that?

Best

K

Hello, Maybe this is stupid, but no clear head now... I have a hAP mini with default setup. Port 1 is WAN (192.168.0.x), port 2 and 3 are bridged LAN. I need to connect a device with static IP from the WAN network (192.168.0.x) to a port of the LAN network (192.168.88.x) and be able to access it. Be...

Thank you very much!

I will try and post back.

Best regards

Kostas

I ordered my RB750, hopefully I will have it tomorrow. My first need is to create 2 separate VLANs to be used with 2 different SSIDs of one Unifi AP. With the code provided, is there anything else to do for the VLANs to have internet access? Do I have to set the ports of the VLANs to have as master ...

Thanks.

Do I have to use the same interface for all traffic? Can I use separate interface for each VLAN?

Best regards

Kostas

Thank you.

In this scenario, how to set the trunk ports on the RB? I will have 3 VLANs on Dell and one trunk. The goal is all the 3 VLANs to have Internet access, but different ip range.

Best regards

Kostas

Thank you!

In this case, I need a VLAN capable router, don't I?

Regards

Kostas

Hello! Here is my scenario. I have a VLAN capable Dell switch (PowerConnect 2824). I have one internet ADSL gateway. I need to create 3 VLANs with different DHCP subnets, and every machine in each VLAN to be able to have internet access. I will create the VLANs on Dell sw, can I use RB 750 GL to acc...

Thank you! I will try it.

Thank you!

Yes, they are on the manual....

Can I use Winbox for that?

Thanks for the answers, it works fine.

How can I set firewall in order to permit access only to common "surfing" ports (like 80, 443, 25, 143 etc).

Regards

Kostas

If your Hotspot is configured on ether2, and ether3 is available, set the master-port of ether3 to ether2. The two are now bridged via the built in chipset at wire speed. Now plug a LAN port of the AP into ether3, give the AP an IP on the Hotspot network (yuck), and turn off the DHCP server on the ...

Hello, We have a Mikrotik RB450 (no miniPCI). I need to add wireless capability in order to use the hotspot function. I have been told that I can use a regular wireless AP in bridge mode with one of the ethernet ports. Can someone help me how can I bridge one of the en interfaces with an AP? Regards...

Thank you for your kind reply.

I just bought this: MikroTik Routerboard 450 (MiniRouter Level4).

Is there any guide of settings this thing up using the 3 ADSL lines that I have?

Thanks in advance

Kostas

Hello We currently have 3 ADSL lines from different ISPs. Im thinking of setting up Mikrotik using an old IBM Server, and use it for load balancing. My questions: Do I need 3 network cards to directly connect the ADSL routers in the PC case? Do I need to set the ADSL routers to be in modem mode? Eve...