Is this being planned in a feature?
Really start to need this. Hate it to have to run a separate DHCP server in the network only for forcing some options.

Where can i find documentation on the light indicators on a hAP ac.
My wireless led is blinking green, orange and red. What does this mean?

Why don't you simply accept the fact that new RB1100AH/x2 don't have 512MB NAND, and that we will try to make it bigger in the future, ok? It is nice to know that the 'old' 1100AH had 512 and the 'new' 1100AH got less. In my example i use the 1100AH mostly to run meta routers. So the less storage s...

Coming back on topic, the specification for the RB1100AH clearly states it is fitted with a 512MB NAND yet the System Store in Winbox shows only 41MB Total. I have checked on an RB1100AH running RoS 5.14, FW 2.39. Why is this please ? :? where does it say that? you are quoting an old manual, for th...

Is the watchdog feature enabled?

By default on 5.x it is enables, but there is no address to check.

/system watchdog print

With RouterOS v5.12, in Winbox, i am missing the option to add a Virtual Interface (vif). Under the interface list, tab Interfaces, i cannot add it. And the existing ones, cannot be edited. I can make a vif on the commandline on the shell interface.. Anybody else with the same issue? WinBox v5.12 on...

Hello, For some filtering i need L7 filtering.. This filter should be triggerd on all webbrowser communication and i created the following L7 protocol: /ip firewall layer7-protocol add name=Webbrowser regexp="User-Agent: [Mm]ozilla" In combination with: /ip firewall filter add action=log c...

I have a RV-493G working fine. Except for some random moments. This can occur 1 time in three days, but sometimes it is 4 times a day. The lockups are between 2 minutes and 20 minutes.. In this time the routerboard isn't reachable from any interface (ethernet, wireless and SERIAL) and isn't forwardi...

As i understand is that the CPU Load under the Resources information should be the same as total of running processes shown with the Profile (total of all non 'idle') on a single CPU system. Why is it that the CPU Load (on my system) is frequently 80% (or higher) (which is expected), but that the pr...

The same problem exists on a RB1100

I have an RB1000 with the ntp package. ntp client configured, but the ntp client will never sync time. The status stays on 'started'. [bakkerl@net] /system ntp client> print enabled: yes mode: unicast primary-ntp: 194.109.64.200 secondary-ntp: 213.132.202.192 status: started [bakkerl@net] /system nt...

I have a setup like attached to this post. From left to right: - line is my internet uplink - RB1000 [1] is my first RB1000 device - next line is a (utp) connection between the two RB1000 devices. - the right RB1000 [2] had a bridge group with a ether1 - On the right RB1000 [2] there is a MetaRouter...

there is no v4.4, you probably mean v4.3

Sorry.. you're correct...., v4.3

found the edit button.. so changed it into 4.3

I have a 433UAH with version routeros 3.3 My setup: desktop (with winbox) <--(utp)--> (ether1) 433UAH (ether3) <--(utp)--> laptop [*]both utp are plain kabels (no crossing). [*]The laptop had address 192.168.253.252 netmask 255.255.255.0 The only config line added is: /ip address add address=192.168...

i get an error when i import the templets can anyone tell me why
Error: XML: Hash version does not exist.
i have cacti 0.78b if im 100% right please help

The templates are created with a newer version of cacti than you are using.

SIP Proxy would be nice. Specially with all there cisco ip phones