Community discussions

MikroTik App

Search found 77 matches

by stenlyto
Wed Jul 01, 2015 9:40 pm
Forum: Forwarding Protocols
Topic: Problem with TWO ISPs in one device
Replies: 1
Views: 1218

Problem with TWO ISPs in one device

Hello there, My situation is I have two ISP ISP 1 - IP1, interface WAN1 ISP 2 - IP2, interface WAN2 Inside I have two private networks LAN1: 10.0.0.0/24 LAN2: 10.20.30.0/24 I have configured the router to work like this /ip firewall nat add action=masquerade chain=srcnat out-interface=WAN1 src-addre...
by stenlyto
Sun Jun 15, 2014 12:59 am
Forum: Wireless Networking
Topic: Metal 2 shpn Problem in WIFI
Replies: 151
Views: 99450

Re: Metal 2 shpn Problem in WIFI

2 weeks ago I DID THE MISTAKE TO BUY 4 Metals... "Mikrotik Support", who is gonna give my money and wasted time back... I decided to remove 4 Bullet M2 connected to 13db omni antenna and working as an AP for clients in out hotel and because I was* a fan of Mikrotik and I needed do create a...
by stenlyto
Wed Jun 11, 2014 11:20 am
Forum: Wireless Networking
Topic: Have a problem with RB Metal
Replies: 3
Views: 1259

Re: Have a problem with RB Metal

I havent mention anything about Hotspot. Its just one AP
by stenlyto
Tue Jun 10, 2014 2:25 pm
Forum: Wireless Networking
Topic: Have a problem with RB Metal
Replies: 3
Views: 1259

Have a problem with RB Metal

I have one RB Metal 2 SHPn with 15db omni antenna in the garden of a hotel. I do not have a problem with the coverage, its just fine.... at the very beginning it was working fine.... I was the only one connected with my laptop. But now, we have more that 300 guests... For each address that DHCP woul...
by stenlyto
Thu Apr 10, 2014 12:35 pm
Forum: General
Topic: VPN Dial on Demand in both sides of tunnel
Replies: 2
Views: 2208

Re: VPN Dial on Demand in both sides of tunnel

why would you like to use dial on demand ? just let the connection alive and leave it that way...if no traffic is generated by computer no traffic goes through the VPN except the information packet between client and server, but that traffic is not much u want to make the Server call the client to c...
by stenlyto
Thu Apr 10, 2014 12:09 pm
Forum: General
Topic: Implementing VLans
Replies: 1
Views: 1020

Implementing VLans

I red a lot about VLANs cause a colleague of mine is setting VLANs in Mikrotik in a different way than I do Both ways work well, but what is best? lest say we have 3 PCs connected to each of two mikrotiks (conected each other ether by ether 5) and three VLANS going over the net Pc1.1 - ether 1 (Mk1)...
by stenlyto
Thu Apr 10, 2014 10:54 am
Forum: General
Topic: 2 RB 1 Hotspot user name & pass
Replies: 1
Views: 982

Re: 2 RB 1 Hotspot user name & pass

2 RB as hotspot gateways and 1 of them running User Manager working with both of them!

If you don't use user manager and create users manually in /ip hotspot user submenu then one way would be to set EoIP between two and use only one as hotspot server - something I don't prefer
by stenlyto
Thu Apr 10, 2014 10:46 am
Forum: Wireless Networking
Topic: help for connecting one subnet to host
Replies: 5
Views: 1593

Re: help for connecting one subnet to host

I dont understand what u want!
by stenlyto
Thu Apr 10, 2014 10:40 am
Forum: Wireless Networking
Topic: MikroTik Wireless systems is 802.3af support?
Replies: 11
Views: 4329

Re: MikroTik Wireless systems is 802.3af support?

http://www.fab-corp.com/product.php?pro ... 273&page=1
its the first I found in google, It will be working with groove or metal
by stenlyto
Wed Apr 09, 2014 2:35 pm
Forum: Wireless Networking
Topic: help for connecting one subnet to host
Replies: 5
Views: 1593

Re: help for connecting one subnet to host

I get it! you have taken mikrotik and neet to configure to work as u want :)

Mikrotik model and pack version ?
by stenlyto
Wed Apr 09, 2014 2:31 pm
Forum: Wireless Networking
Topic: MikroTik Wireless systems is 802.3af support?
Replies: 11
Views: 4329

Re: MikroTik Wireless systems is 802.3af support?

802.3af is POE It is! Mikrotik works from 12V to 48V DC! So if you have some POE injector compatible with 802.3af it's OK! But its expensive to take 802.3af POE injector just to power up the router... U can go with a passive POE and adapter, but all depends on what u do? If you share your idea, we ...
by stenlyto
Wed Apr 09, 2014 2:29 pm
Forum: General
Topic: Src NAT with -same rules on 6.x
Replies: 3
Views: 2889

Re: Src NAT with -same rules on 6.x

It must be working well before u clear it out u may do the stupid idea ONLY for the complaining users.... but its a temporary decision!!! Go behind the router with a laptop and open a website like google: "what's my IP" open the website see the IP and refresh it for a couple of time fast, ...
by stenlyto
Wed Apr 09, 2014 2:06 pm
Forum: General
Topic: Static Routing
Replies: 4
Views: 1337

Re: Static Routing

Fromm all I get you want to do: 196.6.242.30(Linux Server) <--> locally connected to <--> 196.6.242.1 (RB1200) <--> taking internet from <--> 172.24.29.17(Provider Gateway) <---> would like to see 41.162.57.148(Provider SBC) And you need the Mikrotik configuration for that Have I understand well
by stenlyto
Wed Apr 09, 2014 1:57 pm
Forum: Wireless Networking
Topic: help for connecting one subnet to host
Replies: 5
Views: 1593

Re: help for connecting one subnet to host

If you have configured the two hotspot servers and have connected and bypassed the SERVER u shouldn have any problem connecting the SERVER from hotspot2 network.
please share you configuration.
by stenlyto
Wed Apr 09, 2014 1:42 pm
Forum: Wireless Networking
Topic: MikroTik Wireless systems is 802.3af support?
Replies: 11
Views: 4329

Re: MikroTik Wireless systems is 802.3af support?

802.3af is POE It is! Mikrotik works from 12V to 48V DC! So if you have some POE injector compatible with 802.3af it's OK! But its expensive to take 802.3af POE injector just to power up the router... U can go with a passive POE and adapter, but all depends on what u do? If you share your idea, we c...
by stenlyto
Tue Apr 08, 2014 10:09 pm
Forum: General
Topic: Hotspot user management
Replies: 1
Views: 1719

Re: Hotspot user management

Have you thought to change your drugs :) I manage the Guest access with scripts that run at the proper times with commands like: /ip hotspot user enable Guest /ip hotspot user disable Guest So to do the other thing u can use almost the same "scripsts" but read for a second about "IF/E...
by stenlyto
Tue Apr 08, 2014 4:59 pm
Forum: Wireless Networking
Topic: Best AP for Point to Point
Replies: 21
Views: 4816

Re: Best AP for Point to Point

in wireless its ok ping going from 2ms to 10-20ms from time to time
as long as you can enjoy internet and download data normally U DONT need to worry about pings!
by stenlyto
Tue Apr 08, 2014 12:09 am
Forum: Wireless Networking
Topic: Best AP for Point to Point
Replies: 21
Views: 4816

Re: Best AP for Point to Point

U have no problems with you ping or your LINK at all !!!
Where is you problem actually ?
by stenlyto
Mon Apr 07, 2014 10:42 pm
Forum: Wireless Networking
Topic: Best AP for Point to Point
Replies: 21
Views: 4816

Re: Best AP for Point to Point

If you dont know how to ping from mikrotik, U are already in trouble :) 1. From your station log in (winbox) click new terminal and write /ping ISP-IP-Address interval=0.1 size=1500 after 5 seconds ctrl+c will stop, After stop there will be something like sent=X received=XX packet-loss=X% min-rtt=XX...
by stenlyto
Mon Apr 07, 2014 10:32 pm
Forum: General
Topic: BUG? RouterOS 6.11 & Acct-Interim-Interval
Replies: 9
Views: 3606

Re: BUG? RouterOS 6.11 & Acct-Interim-Interval

The freeradius is the version 2.1.10 in AWS Debian 6.0.7 (x64). My suggestion: So...No debuging - we are all blind :) Freeradius v2.x you say! usually its: /usr/share/freeradius/dictionary.mikrotik look for that file! and this one freeRadius.sql show them to me Hello stenlyto, The Freeradius 2.x ha...
by stenlyto
Mon Apr 07, 2014 10:06 am
Forum: General
Topic: help about access points
Replies: 1
Views: 722

Re: help about access points

/ip neighbours if AP are mikrotik, ubiquity or support Cisco Discovery Protocol
the other way is:
/tool ip-scan address-range=X.X.X.X/X (see /ip address output on the ethers)
by stenlyto
Mon Apr 07, 2014 9:53 am
Forum: General
Topic: BUG? RouterOS 6.11 & Acct-Interim-Interval
Replies: 9
Views: 3606

Re: BUG? RouterOS 6.11 & Acct-Interim-Interval

The freeradius is the version 2.1.10 in AWS Debian 6.0.7 (x64).
My suggestion:
So...No debuging - we are all blind :)
Freeradius v2.x you say!
usually its: /usr/share/freeradius/dictionary.mikrotik
look for that file!
and this one freeRadius.sql
show them to me
by stenlyto
Mon Apr 07, 2014 9:10 am
Forum: General
Topic: BUG? RouterOS 6.11 & Acct-Interim-Interval
Replies: 9
Views: 3606

Re: BUG? RouterOS 6.11 & Acct-Interim-Interval

I have freeradius as well Start it in debug mode, log in wait for a minute and log out... check whats the output in the debug and then log in again.... U may have a freeradius function missing argument or something to prevent the good work of updating database What version of freeradius u use and w...
by stenlyto
Mon Apr 07, 2014 9:09 am
Forum: General
Topic: BUG? RouterOS 6.11 & Acct-Interim-Interval
Replies: 9
Views: 3606

Re: BUG? RouterOS 6.11 & Acct-Interim-Interval

I have freeradius as well Start it in debug mode, log in wait for a minute and log out... check whats the output in the debug and then log in again.... U may have a freeradius function missing argument or something to prevent the good work of updating database What version of freeradius u use and wh...
by stenlyto
Mon Apr 07, 2014 8:58 am
Forum: Wireless Networking
Topic: How do I check if my Mikrotik is infected
Replies: 6
Views: 3198

Re: How do I check if my Mikrotik is infected

new password and check if somewhere is created VPN That was what I was asking :) any others ? I already went there and did reset config... Am just curious how to catch viruses done on mikrotik, cause in google you can find lots of scripts and mechanism for sending passwords and things like that.......
by stenlyto
Sun Apr 06, 2014 10:28 pm
Forum: Wireless Networking
Topic: Best AP for Point to Point
Replies: 21
Views: 4816

Re: Best AP for Point to Point

Did you not read what I asked you to do !!!
by stenlyto
Sun Apr 06, 2014 10:24 pm
Forum: Wireless Networking
Topic: How do I check if my Mikrotik is infected
Replies: 6
Views: 3198

Re: How do I check if my Mikrotik is infected

if it is rebooted NOT from command, it will say *system,error,critical router was rebooted without proper shut down the router gets power from UPS and other devices connected to the router on the same power have a long uptime So the router was rebooted by command.... I know, as u know, as everybody ...
by stenlyto
Sun Apr 06, 2014 11:31 am
Forum: Wireless Networking
Topic: How do I check if my Mikrotik is infected
Replies: 6
Views: 3198

How do I check if my Mikrotik is infected

Hello there, Two weeks ago I fired one of my my employee He had the passwords for all my stations. Before I decided to fire him, I changed the passwords, but by mistake I forgot two change the pas to two important routers... yesterday I saw that the log in one of them is missing and I assume he has ...
by stenlyto
Sun Apr 06, 2014 11:21 am
Forum: Wireless Networking
Topic: Have a question
Replies: 4
Views: 1133

Re: Have a question

Could you not convince your boss to purchase a second router(s) for testing new updates? Nice catch :) 1. New x86 station = about 150$ 2. Level 6 = about 250$ ---------------------------- for testing.... hm... I wiil give myself a shot :) 5.20 is working fine now... Im asking... is there anything n...
by stenlyto
Fri Apr 04, 2014 9:55 pm
Forum: Wireless Networking
Topic: Best AP for Point to Point
Replies: 21
Views: 4816

Re: Best AP for Point to Point

Normis is right about the thing he said, the problem is WIRELESS, with the traffic the ping is going more and more Do something.... do ping test 1. ping ISP gateway interval 0.1 size 1500 (according to me 5-10ms) 2. ping ISP gateway interval 0.1 size 15000 (10-15ms) show the output, so we can see if...
by stenlyto
Fri Apr 04, 2014 9:22 pm
Forum: General
Topic: change the port of a source IP for monitoring AP behind NAT
Replies: 2
Views: 1087

Re: change the port of a source IP for monitoring AP behind

when adding clients stations behind the router in your SMTP server configure
1. router ip, listen on XXXX
1. router ip, listen on YYYY

and on the router redirect the ports

I dont know, it may work for you
by stenlyto
Fri Apr 04, 2014 9:16 pm
Forum: Wireless Networking
Topic: Have a question
Replies: 4
Views: 1133

Have a question

Im running User manager on v.5.20
Is there any reason I should go to v6.x

Is there anything different between those two ?

I hate updating, cause the database is too big and if something goes wrong my BOSS will kill me:)
Its working fine now, but if there is something new.... I could think about it.
by stenlyto
Thu Apr 03, 2014 11:43 am
Forum: Wireless Networking
Topic: Problem understanding mikrotik license
Replies: 1
Views: 1045

Problem understanding mikrotik license

HotSpot active users on level 4 are with limitation of 200 What does it meas: a) on the NAS device (level 4) only 200 active - I believe this is the one :) b) on the other device (level 4) with UserManager only 200 active cause I have a small hotspot system with mikrotik 951ui and free radius server...
by stenlyto
Wed Apr 02, 2014 5:11 pm
Forum: Wireless Networking
Topic: 18km PtP wireless link issue
Replies: 21
Views: 7473

Re: 18km PtP wireless link issue

Hello, I have wireless link at 18km distance. I'm using RB435G, R52Hn wireless cards, 0.5m coax cable with RP-SMA connectors (on both ends) and dual polarized Ubiquiti 30dB rocket dish. I have the same configuration on both ends. I'm getting the following error every hour, and some times every few ...
by stenlyto
Wed Mar 26, 2014 6:37 pm
Forum: Wireless Networking
Topic: I have a stupid IDEA
Replies: 18
Views: 4798

Re: I have a stupid IDEA

I'll ask the obvious questing seeing that your getting support for UBNT in a MikroTik form... why would you want to use a Ubiquity NSM2 over MikroTik? I defiantly prefer MikroTik and I have used both extensively so I feel that I can make a fair comparison. Also notice how nice the MikroTik Support ...
by stenlyto
Wed Mar 26, 2014 2:36 pm
Forum: Wireless Networking
Topic: I have a stupid IDEA
Replies: 18
Views: 4798

Re: I have a stupid IDEA

Joshaven I need your advice here is my topology Site1 (all cables going in) 1 cable -> site1 -> (50m FTP awg 24) -> NSM2 (24v max:0.5a) -> ( 30m FTP awg 24) -> NSM2 (24v max:0.5a) 2 cable -> site1 -> (45m FTP awg 24) -> NSM2 (24v max:0.5a) -> ( 32m FTP awg 24) -> NSM2 (24v max:0.5a) 3 cable -> site1...
by stenlyto
Wed Mar 26, 2014 12:26 pm
Forum: Wireless Networking
Topic: I have a stupid IDEA
Replies: 18
Views: 4798

Re: I have a stupid IDEA

Aahhh good point. I will check the requirements in my country.
But particularly this task is for my needs only and no one will check the installations.
48Vac is the better way, cause if someone by accident cut the cable it will be safe for him
by stenlyto
Tue Mar 25, 2014 6:39 pm
Forum: Wireless Networking
Topic: I have a stupid IDEA
Replies: 18
Views: 4798

Re: I have a stupid IDEA

I ran some calculations (see attached) they are a little over simplified because the calculations I am using are the sum of all of the distances of the wire listed in the post... This means I am budgeting the power loss as if all of the draw was at the furthest point which is not the case. I am pre...
by stenlyto
Tue Mar 25, 2014 3:45 pm
Forum: Wireless Networking
Topic: 18km PtP wireless link issue
Replies: 21
Views: 7473

Re: 18km PtP wireless link issue

Here is the AP configuration: ....wireless-protocol=nstreme 1.Never RocketDish :) I dont like it :) personal... 30dB rocket dish gives 5-6 degree, good for 18 km but when there is no noise... If you have noise best fit is antenna with 2-3-4 degree, like 34dB rocket dish 2. After this is what u have ...
by stenlyto
Sun Mar 23, 2014 3:05 pm
Forum: Wireless Networking
Topic: I have a stupid IDEA
Replies: 18
Views: 4798

Re: I have a stupid IDEA

You can get a multi-port passive PoE injector. Search the Internet for something like: WS-POE-8-ENC Joshaven Potter http://joshaven.com Sent from my iPhone using Tapatalk My problem is that the antennas are going one after another My House - 100m - antenna - 100m - antenna - 80m - antenna - 75m - a...
by stenlyto
Sun Mar 23, 2014 3:03 pm
Forum: Wireless Networking
Topic: I have a stupid IDEA
Replies: 18
Views: 4798

Re: I have a stupid IDEA

I got it balanced :) 5 Amps charger and 5 NsM2 working good... the only I did was to cut the cables before and after each NsM2, so none of the Ns will give power from the second port, this way I saved the electronics inside, cause u are all right - If I power up 2 or 3 it ok, but if I put 6, the pow...
by stenlyto
Fri Mar 21, 2014 6:50 pm
Forum: Wireless Networking
Topic: I have a stupid IDEA
Replies: 18
Views: 4798

I have a stupid IDEA

I didnt write to ubnt forum, because some of their employees will remove the post :) The question, My Idea, is it working at all??? 1x 24V, 5A Power Supply Unit with Battery Charger Function (UPS) give a NanoStation M2 power over the PoE port. Still OK :) Now, the NSM2 use the secondary port to powe...
by stenlyto
Fri Mar 21, 2014 6:39 pm
Forum: Wireless Networking
Topic: HotSpot Design
Replies: 6
Views: 2803

Re: HotSpot Design

No u can not... there is a way but not efficient. next time to do a good job get NanoStation M2/LocoM2 (Depends on how big is the Auditorium) an a single Access Point About the HotSpot, u can configure 3 diffirent hotspot services on each port on the RB2011UiAS to complete your task! Or aruba or me...
by stenlyto
Fri Mar 21, 2014 6:33 pm
Forum: Wireless Networking
Topic: Need an advice for a 5Ghz Link
Replies: 3
Views: 1415

Re: Need an advice for a 5Ghz Link

Works like a charm :) You will need free line of sight and quite high towers. Than you can start thinking about devices. Sent from Android by Tapatalk. I had checked that A is visible from B.... Im not so stupid :) A good advice build never a point to point link on 2.4 GHz. This frequency is not goo...
by stenlyto
Mon Feb 24, 2014 8:23 am
Forum: Wireless Networking
Topic: HotSpot Design
Replies: 6
Views: 2803

Re: HotSpot Design

No u can not... there is a way but not efficient.
next time to do a good job get NanoStation M2/LocoM2 (Depends on how big is the Auditorium) an a single Access Point
About the HotSpot, u can configure 3 diffirent hotspot services on each port on the RB2011UiAS to complete your task!
by stenlyto
Mon Feb 24, 2014 8:16 am
Forum: Wireless Networking
Topic: Need an advice for a 5Ghz Link
Replies: 3
Views: 1415

Need an advice for a 5Ghz Link

Hello there, My idea for a 20km link is : Site 1: Groove 52HPn - 500mW 2.4 with 28dBi Parabolic Aluminium Antenna Reflector 60 cm, Single Polarized Feeder 4,9-6,1 GHz Level3 as a client Site 2: RB433AH, 1x Wistron Neweb DCMA-82 Industrial Temperature: 802.11a/b/g High Power mPCI Card (FCC Certified)...
by stenlyto
Sun Aug 12, 2012 4:42 pm
Forum: General
Topic: problem with DST-NAT
Replies: 3
Views: 1158

Re: problem with DST-NAT

Mikrotik-Router(WAN: 196.xxx.xxx.xxx)(LAN: 192.168.88.1/24) --> My HTTP Server (192.168.88.100) /ip firewall nat add action=dst-nat chain=dstnat dst-address=Mk-Wan-IP dst-port=80 protocol=tcp to-addresses=192.168.88.100 to-ports=80 make that rule for protocol UDP, as well Repeat those two for any ot...
by stenlyto
Thu Aug 09, 2012 8:17 pm
Forum: Wireless Networking
Topic: Suggestions for 3G USB adapter
Replies: 0
Views: 662

Suggestions for 3G USB adapter

Hello there, I'm using Mikrotik for years, but never used the 3G USB connection, and have a few questions. I have a SIM card given to me by my Mobile Operator with static IP address(Public). What device do I need to get that address in my Mikrotik so I can use it directly from the routerboard. First...
by stenlyto
Sat Mar 10, 2012 1:55 pm
Forum: General
Topic: Need an advice!
Replies: 5
Views: 1638

Need an advice!

Hello guys, I'm providing Wireless Internet in a small mountain region.... When I started I got a few clients so I decided to use Hotspot service.... What I was using was to accomplish that was: 1. Free BSD 8.0 2. Freeradius 118 3. Postgresql database 3. Web Based billing system, created by me ( I'm...
by stenlyto
Fri Mar 09, 2012 12:54 am
Forum: General
Topic: wireless performance
Replies: 3
Views: 1257

Re: wireless performance

Am... something is wrong .... 10 km with that equipment and u have 69/69 dbm (which is actually your problem) ? Thats not a software problem Recheck your antennas' position check your coax cable and the connections for water... Thats what I usually do 1. channel-width=40mhz-turbo 2. name="wlan1...
by stenlyto
Sun Mar 04, 2012 5:28 pm
Forum: General
Topic: Connections?
Replies: 2
Views: 953

Re: Connections?

Yeap, that's what I mean!
by stenlyto
Sat Mar 03, 2012 10:52 am
Forum: General
Topic: Connections?
Replies: 2
Views: 953

Connections?

Hello there :) A long time ago, when I was in university one of my lecturers was speaking about the maximum number of connections that could be provided by different types of networks.... It was something like, if you have two computers connected with : - Ethernet(10/100 mbps) connection between, yo...
by stenlyto
Thu Jan 12, 2012 8:27 am
Forum: Beginner Basics
Topic: how i can do this plzz
Replies: 25
Views: 3891

Re: how i can do this plzz

ISP (PPPoE Server) -> (ISP Antenna) ))))))))))5GHz)))))))))) (SXT antenna) -----cable connection----Your PC Is that your network topology.... If so? 1. Reset Configuration 2. Establish 5GHz wireless connection with your ISP 3. Create PPPOE client 4. After PPPOE client connected, make sure u have rec...
by stenlyto
Wed Jan 11, 2012 9:57 pm
Forum: Beginner Basics
Topic: how i can do this plzz
Replies: 25
Views: 3891

Re: how i can do this plzz

A question? Before using SXT, did u reset the current configuration and then did u remove the default configuration.... cause SXT is comming with a default configuration, with DHCP server (192.168.88.0) and a few other thing that could make ur idea impossible :) Make sure u have removed all default ...
by stenlyto
Sun Jan 08, 2012 9:06 pm
Forum: Beginner Basics
Topic: configure dual wan on 450g that work simultenously???
Replies: 15
Views: 6844

Re: configure dual wan on 450g that work simultenously???

U will never learn :) U can NOT route them! Your idea is completely wrong! the only way to use those 3 networks after your Mk, u have to purchase them from only ONE ISP! then u have to run BGP on Mikrotik and route them.... but all this will happen with the support of your ISP! tell me how those 3 n...
by stenlyto
Sun Jan 08, 2012 8:50 pm
Forum: Beginner Basics
Topic: how i can do this plzz
Replies: 25
Views: 3891

Re: how i can do this plzz

Here it is, ur mistake :) Think for a moment.... Following your detailes u should have gotten something like that? [admin@your-router] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade out-interface=ether1 Correct me if wrong, but u have set your ...
by stenlyto
Sat Jan 07, 2012 10:41 pm
Forum: Beginner Basics
Topic: how i can do this plzz
Replies: 25
Views: 3891

Re: how i can do this plzz

Masquerade WAN Network - chain=srcnat action=masquerade Route wan ip - ADC 192.168.1.0/24 192.168.1.2 WAN Dont suggest things like that.... it will never work! mkh, I asked u to give me your setting to understand how u connect to INTERNET.... U said broadband? Do u mean ppoe connection ? Do u have ...
by stenlyto
Sat Jan 07, 2012 4:20 pm
Forum: Beginner Basics
Topic: configure dual wan on 450g that work simultenously???
Replies: 15
Views: 6844

Re: configure dual wan on 450g that work simultenously???

is this possible to use wan1 link for some coonection and wan2 for another connection.both link comes to mt450 and from mt450 to linux box that contains usermanagement software that is used to control user behaviour then my internal netwok start(10.210.2.0/24) NO! both link comes to mt450 and from ...
by stenlyto
Sat Jan 07, 2012 2:21 am
Forum: Beginner Basics
Topic: how i can do this plzz
Replies: 25
Views: 3891

Re: how i can do this plzz

not so difficult... :)
What do u do (what settings do u set on Windows) to get ur connection established?
by stenlyto
Thu Jan 05, 2012 12:37 pm
Forum: General
Topic: HOW to change Invalid Username or Password
Replies: 6
Views: 7771

Re: HOW to change Invalid Username or Password

HotSpot...
It MAY include one or more Reply-Message Attributes with a text message which the NAS MAY display to the user.
Thats OK. "One or More" .... What if they are two? which one will show NAS to the client!?
by stenlyto
Thu Jan 05, 2012 1:28 am
Forum: Beginner Basics
Topic: Hotspot status page
Replies: 3
Views: 2043

Re: Hotspot status page

Alright.... So.... u got some users, local users ! I have never used HotSpot that way cause I have more than 200 Mikrotik devices running as HotSpot gateways.... I need radius and database .... either way I need a GUN to shoot myself :) BUT as for what u are asking .... Ur system is saving some info...
by stenlyto
Thu Jan 05, 2012 1:00 am
Forum: General
Topic: HOW to change Invalid Username or Password
Replies: 6
Views: 7771

Re: HOW to change Invalid Username or Password

U got my question wrong.... I got all of what u said.... Im asking for something else..... When a client sends username and password using the login page.... we have "lets say 3 different scenarios" 1. Login ok.... client gets in "Internet" 2. radius server not responding.... -> ...
by stenlyto
Wed Jan 04, 2012 7:25 pm
Forum: General
Topic: HOW to change Invalid Username or Password
Replies: 6
Views: 7771

Re: HOW to change Invalid Username or Password

10x....
That was quite helpful... :)
Can I ask for something else.... how to change "Invalid username or password"
I mean.... I live in Bulgaria and would like to use Bulgarian language for my customers... :)
by stenlyto
Wed Jan 04, 2012 2:58 pm
Forum: General
Topic: HOW to change Invalid Username or Password
Replies: 6
Views: 7771

HOW to change Invalid Username or Password

Hi there, Im using freeradius on FreeBSD and my database is on Postgres.... For the last five day I was looking for a solution on my problem .... but did get it right :) Basicaly I have organized the system like that: 1. When i creat a user My web system puts in radcheck (username User-password == p...
by stenlyto
Tue Jan 03, 2012 7:00 pm
Forum: Beginner Basics
Topic: Connection to Internet provider Questions
Replies: 3
Views: 1093

Re: Connection to Internet provider Questions

1. Dont involve DHCP .... its a service, not a solution!

2. What I get from your Info is that you are planing to build Hotspot System ( probably on Wireless... cause u mentioned "noise") and planing to use DMA.... as a Radius Server and Billing System ?

Have I gotten the right picture ?
by stenlyto
Tue Jan 03, 2012 6:51 pm
Forum: Beginner Basics
Topic: Graphing - store
Replies: 1
Views: 879

Re: Graphing - store

Dont do it this way
Read about MRTG software!
by stenlyto
Tue Jan 03, 2012 6:49 pm
Forum: Beginner Basics
Topic: Hotspot status page
Replies: 3
Views: 2043

Re: Hotspot status page

Not so easy!
Give me more info...
1. Are you using Billing system? Which one?
2. MySQL or PostgreSQL or Oracle or what database u use?
3. What do u use to build radius?

OR at least, give me your database chema
by stenlyto
Tue Jan 03, 2012 6:40 pm
Forum: Beginner Basics
Topic: configure dual wan on 450g that work simultenously???
Replies: 15
Views: 6844

Re: configure dual wan on 450g that work simultenously???

this could never happen! what U can do is to put the public IPs on the Mk on ether1 and ether2, and configure a network between Mk and Linux and NAT the network! Then on Mk do fail-over or load-balancing. If you get 5mbps from ISP1 and 10 mbps from ISP2 you can NOT get 15 mbps at the end..... "...
by stenlyto
Mon Jan 02, 2012 3:52 pm
Forum: Beginner Basics
Topic: configure dual wan on 450g that work simultenously???
Replies: 15
Views: 6844

Re: configure dual wan on 450g that work simultenously???

Pf...
IS there a anything between Mk and ur Linux? or just a cable connection ?
by stenlyto
Sun Jan 01, 2012 10:38 pm
Forum: Beginner Basics
Topic: Is it possible or not??!!!
Replies: 6
Views: 1771

Re: Is it possible or not??!!!

Yeah... web proxy is OK for websites....
but be careful when u do the redirect!!!

As for messenger.... see what port is using and use ip filter :)
by stenlyto
Sun Jan 01, 2012 10:34 pm
Forum: Beginner Basics
Topic: Connection to Internet provider Questions
Replies: 3
Views: 1093

Re: Connection to Internet provider Questions

It could be!
Give me your Idea for your Network Topology.... How do u thing it will look like after a certain period of time.... ?
For a start, that would be a good deal.... but not the best if you are planning to develop your network fast!
by stenlyto
Sun Jan 01, 2012 10:29 pm
Forum: Beginner Basics
Topic: configure dual wan on 450g that work simultenously???
Replies: 15
Views: 6844

Re: configure dual wan on 450g that work simultenously???

So much with my Arrogance! 1. Why do u need an IP pool for a network between ur Mk and ur Linux ? 2. Why do u need two IP pools for that, as well? :) Just put the first provided IP address on ether1, the second on ether2.... Put 192.168.0.1/30 on ether3 and 192.168.0.2/30 on ur linux and do fail ove...
by stenlyto
Sun Jan 01, 2012 10:07 pm
Forum: Beginner Basics
Topic: configure dual wan on 450g that work simultenously???
Replies: 15
Views: 6844

Re: configure dual wan on 450g that work simultenously???

It took me 10 min, just to understand how your brain developed ur IDEA, and how the Hell do you imagine to do what u wanna do! Hah... there is a solution to your problem, BUT its not gonna follow your plans :) If you dont want to use NAT, start reading about BGP (Border Gate Protocol)..... and hope ...
by stenlyto
Sun Jan 01, 2012 9:59 pm
Forum: Beginner Basics
Topic: Mikrotik hotspot bypass
Replies: 2
Views: 1178

Re: Mikrotik hotspot bypass

That was a bug which was cleared in ver. 3.0 and after :)
Not to worry!
by stenlyto
Sun Jan 01, 2012 9:48 pm
Forum: The User Manager
Topic: RADIUS accounting request not sent: no response Please help
Replies: 9
Views: 33812

Re: RADIUS accounting request not sent: no response Please h

Ur are all wrong!!! Usually when a client (HotSpot user) log INto the system, the HotSpot Gateway sends information to the radius server, whos work is not only to authenticate, but to track the users behavior. For that reason the Radius Server insert/update information into the accounting table whic...
by stenlyto
Fri Aug 28, 2009 2:21 pm
Forum: General
Topic: MikroTik is looking for School/College in New Delhi, India
Replies: 16
Views: 3408

Re: MikroTik is looking for School/College in New Delhi, India

I`m graduating Tehnical University of Varna, Bulgaria.... Specification: Computer Systems and Technologies.... I was 4 years in the student counsil and recently with help of the Dean of the Computer Science Department are looking for offers like yours... Send me some information... I still have conn...
by stenlyto
Fri Aug 28, 2009 2:08 pm
Forum: Beginner Basics
Topic: Installing Mikrotik with slackware
Replies: 1
Views: 1036

Installing Mikrotik with slackware

I have on a PC and Linux Slackware installed, and have 10 Gb free space...
My question is, can I create another partition of these 10 GB and install Mikrotik OS on it.... ?
If I can, is there anything special and is there any problem with lilo ?