MikroTik

johnvam

Follow these steps exactly: ./ip dns set servers=1.1.1.1,1.0.0.1 ./system ntp client set enabled=yes server-dns-names=time.cloudflare.com ./tool fetch url=https://curl.haxx.se/ca/cacert.pem ./certificate import file-name=cacert.pem passphrase="" ./ip dns set use-doh-server=https://1.1.1.1...

johnvam

Hello!
I have one question. The option Verify DoH Certificate is mandatory?
Because I set https://cloudflare-dns.com/dns-query and everything works fine!
The verify DoH certificate option helps somehow?
Thank you

johnvam

/interface pppoe-client add comment=XXXXXXXXXX disabled=no interface=ether2-WAN max-mru=1492 max-mtu=1492 name=WAN-WIND password=XXXXXXXXX user=XXXXXXXXXX /interface 6to4 add comment="Hurricane Electric IPv6 Tunnel Broker" !keepalive local-address=37.6.250.6 mtu=1280 name=sit1 remote-addre...

johnvam

Hello everyone! I just setup a new HE tunnel for having IPv6 to my Mikrotik. My problem is that I can ping Google DNS v6 from my Router and my laptop but when I try to open webpages they stuck and Chrome is stuck on "Establishing Secure Connection" even on IPv4 webpages!!! Any idea plz? Th...

johnvam

I have the same problem also... When SIP Service is ON, PCC is not working...

Any idea?

johnvam

Any update?

johnvam

1) Make sure you have loopback interface setup with IP address.

For eBGP or iBGP peers? Do you use public or private IPs for loopback?

the only one with different settings is the ibgp peer (it has route reflector setup)

you have route reflector enabled on both routers for iBGP?

johnvam

Dear faisali,

I found your information very useful but I would prefer if you could also send me your peer details.

Also do you have any idea why when we start advertisement of our networks from the second BGP router we loose also inbound and outbound traffic?

Thank you

johnvam

post your config... we are using a similar setup, we have two routers doing bgp to multiple peers each, and we are running ibgp & OSPF between the two. (OSPF is running on other routers as well) Dear faisali. could you please share with me your config in order to check it! Thank you very much!

johnvam

I also read this example with Cisco routers and it's easy to implement to Mikrotik. http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html#conf5 But my question is: if I add "set as-path prepend XXX789" to one router only then all the inbound traffic probabl...

johnvam

BGP ROUTER 1 CONFIG /routing filter chain=BGP ROUTER 2-IN protocol="" bgp-as-path=^XXX789_ invert-match=no action=accept set-distance=20 set-bgp-prepend-path="" chain=BGP ROUTER 2-OUT protocol="" invert-match=no action=accept set-bgp-prepend-path="" chain=OUT...

johnvam

I upgraded our CCR1016-12S-1s+ from 6.13 to 6.21.1 and it was rebooted with no reason several times in day...

Also Watchdog is not creating supout file in order to send you info!!!

Rolled back to 6.13 thanks to second partition!

johnvam

Dear friends, I have attached our network architecture. We splitted our upstreamers to both our BGP routers and when we enable the BGP networks announcement on second BGP router, the world is losing us... We have our own AS number and one /22 IPv4 pool that we announce from the first BGP router. Our...

johnvam

Finally is it possible to redistribute BGP routes between two same AS ???

johnvam

Thank you i4jordan

johnvam

Mikrotik's DAC are active or passive? What is the difference?

Thank you

johnvam

Is there anybody that use Mikrotik's DAC with Dell Switches?

Thank you

johnvam

Dear users, we have some Dell Servers, Dell switches and Mikrotik CCR routers. We want to use Mikrotik DAC SFP+ cables for the connections between those products. Do you have any idea if Mikrotik DAC cables are compatible with Dell equipment? Specific products are Dell R620 servers with Intel X520 S...

johnvam

Any estimated release date?

johnvam

So it's sure that CCR1016-12S-1S+ comes with no memory DIMMs???

This is really bad ...

johnvam

Dear friends, we have one 42U rack inside MedNautilus Datacenter. For BGP router we are using a CCR1016 with multiple copper connections with several carriers. We have an issue with Cogent's 100Mbps uplink... We have made hundreds of bandwidth tests using iperf between our servers and other servers ...

johnvam

Any update?

johnvam

sure, but if you're using NAT, long-time connections will break periodically. so you'd better use http://wiki.mikrotik.com/wiki/PCC#Appli ... _Balancing

What do you suggest regarding the PCC classifier???

src-address
dst-address
both-addresses
etc...

johnvam

sure, but if you're using NAT, long-time connections will break periodically. so you'd better use http://wiki.mikrotik.com/wiki/PCC#Application_Example_-_Load_Balancing I used this config for a long time but I had problems with VoIP services... When one WAN was down and got UP again the VoIP connec...

johnvam

in the new routeros versions, u do not have to mark any packets to obtain a load balance. you could simply add 2 gateways in your ip route to get your load balance work

by this way I can have load balance and failover combined?

Thanks!

johnvam

I have ROS 4.3 and this script is not working...

Please someone to send me a working script for changeip.com.

Thanks!

johnvam

OK!

scheduler works perfect!

maybe the problem in on script...

I used the script which is at the top of the thread and I only changed the 3 first variable like this :

:global ddnsuser "xxxxxxx"
:global ddnspass "xxxxxxxx"
:global ddnshost "xxxxxxx.ath.cx"

johnvam

what I have to select at policy..?

scheduler and script...

My configuration is this :

http://img196.imageshack.us/img196/5932/scriptw.png

http://img401.imageshack.us/img401/8265/scheduler.png

johnvam

It's not working....

Scheduler counting but the IP is not changing...

johnvam

ok!

my scheduler line is :

/system script run dynDNS \r\n

let's see if it's working...

johnvam

when I executed this

/system script run dynDNS

the script run succesfully and the IP changed!!!

But I have put this script to run on scheduler every 1 minute....

johnvam

Hey! I bought yesterday an RB 750 and I'm trying to setup DynDNS using this script. I want to ask if the only variables that I have to change is those : :global ddnsuser "DYNDNSUSER" :global ddnspass "DYNDNSPASS" :global ddnshost "DYNDNSHOST" or I need to change and som...

Search found 32 matches

Re: DNS over HTTPS

Re: DNS over HTTPS

Re: HE IPv6 tunnel broker not working

HE IPv6 tunnel broker not working

Re: Pcc load balancing sip calls fail

Re: CCR1072 Availability

Re: BGP huge problem with second Mikrotik network announceme

Re: BGP huge problem with second Mikrotik network announceme

Re: BGP huge problem with second Mikrotik network announceme

Re: BGP huge problem with second Mikrotik network announceme

Re: BGP huge problem with second Mikrotik network announceme

Re: v6.21.1 released

BGP huge problem with second Mikrotik network announcement !

Re: BGP routes not propagated between iBGP and eBGP [SOLVED]

Re: Mikrotik DAC SFP+ Cables compatibility

Re: Mikrotik DAC SFP+ Cables compatibility

Re: Mikrotik DAC SFP+ Cables compatibility

Mikrotik DAC SFP+ Cables compatibility

Re: CCR1072 Availability

Re: No possibility to expand memory on CCR

Low Cogent IP Transit Speed with CCR1016

Re: Multiple WAN IPs 1 NIC, load balancing with a second ISP

Re: MikroTik DSL load balancing

Re: MikroTik DSL load balancing

Re: MikroTik DSL load balancing

Re: ChangeIP Script and ROS 4.beta.x

Re: dynDNS Update Script

Re: dynDNS Update Script

Re: dynDNS Update Script

Re: dynDNS Update Script

Re: dynDNS Update Script

Re: dynDNS Update Script