Community discussions

MikroTik App

Search found 705 matches

by Lakis
Sun Nov 14, 2021 10:05 pm
Forum: Announcements
Topic: v6.49 [stable] is released!
Replies: 219
Views: 95827

Re: v6.49 [stable] is released!

Unprofessional is to upgrade like 10 devices and then find out there is a problem... a month after release and without reading other user's experiences. LOL dude Unprofessional is they should tested before it is relisted, anyway device work after upgrade but wont boot after second reboot. link http...
by Lakis
Sun Nov 14, 2021 8:13 pm
Forum: Announcements
Topic: v6.49 [stable] is released!
Replies: 219
Views: 95827

Re: v6.49 [stable] is released!

This is unprofessional, I lost like 10 devices, need to go to do netinstall on site.
DONT UPGRADE devices with mibse architecture to 6.48.5 and 6.49 after second reboot it is game over and it sucks
by Lakis
Sat Apr 24, 2021 9:28 pm
Forum: The Dude
Topic: Lags and missing snmp data on links
Replies: 2
Views: 6611

Re: Lags and missing snmp data on links

My approach is to vacuum the database every day. If the database is not vacuumed for long time, exporting the database, removing, creating the new one and importing data back could help a lot to start with smaller database. Be sure to check the results on test system before you do whatever of sugge...
by Lakis
Wed Apr 07, 2021 9:06 pm
Forum: General
Topic: PowerPro no HOfload on second Bridge
Replies: 1
Views: 600

PowerPro no HOfload on second Bridge

Hi. I have installed NetPower 16P on tower and I have 2x1Gbit fibers in to it. Currently I need around >1.6Gbit/s so I have to run both fibers. Simply some of ports are bridged with sfp1 others are bridged with sfp2. So the question is why ports put in Bridge2 despite Hardware Offload is selected ar...
by Lakis
Sat Aug 15, 2020 4:27 pm
Forum: RouterBOARD hardware
Topic: netPower pro craziness
Replies: 1
Views: 1081

netPower pro craziness

netPower pro is nice product but Mikrotik you should work little harder on software thing is I want to use only one DC24V and when I attach device like hEX PoE or any other device that can accept up to 57v, device want power up, constantly receiving massage voltage is to low lol, whatever you set lo...
by Lakis
Tue Sep 10, 2019 9:03 pm
Forum: RouterBOARD hardware
Topic: LHG 5 Ethernet problem
Replies: 2
Views: 3047

Re: LHG 5 Ethernet problem

Hello,
This may be a cable problem or a RJ45 problem.
Yes I know it looks that way but I tried different cables. ether continue to disconnect, tomorrow I'll put new LHG.
by Lakis
Mon Sep 09, 2019 7:45 pm
Forum: RouterBOARD hardware
Topic: LHG 5 Ethernet problem
Replies: 2
Views: 3047

LHG 5 Ethernet problem

Hello, I need a little help with LHG5. Have LHG 5 connected with cat5 to OmniTik PoE, in a day time (when temp. is higher) I get ether1 link down all the time I tried changing Omnitik (because I don't have extra LHG in my hand) , cables and etc. but no change, ethernet continues to disconnect. LHG.p...
by Lakis
Mon Apr 08, 2019 1:29 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

Hello little info and I need some advice. We have 3km 60G Link already deployed almost 3 mounts ago Ap Side ---------- connected: yes frequency: 66000 remote-address: tx-mode: dmg tx-mcs: 8 tx-phy-rate: 2.3Gbps signal: 80 rssi: -60 tx-sector: 6 tx-sector-info: right 1 degrees, down 1.4 degrees dista...
by Lakis
Sat Dec 01, 2018 11:20 am
Forum: Announcements
Topic: v6.44beta [testing] is released!
Replies: 365
Views: 169153

Re: v6.44beta [testing] is released!

Dude multithreading support when?
by Lakis
Thu Nov 22, 2018 4:04 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

First problems with snow. Links on 800m distances are down :(
https://translate.google.cz/translate?s ... t=&act=url
Does it work on 66Ghz?
by Lakis
Wed Nov 07, 2018 3:22 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

Honzam how is 4173m link, any luck with the rain is it stable?
Thanks.
No you will need backup
What about 3km link, if I use 66Ghz do I need backup?
by Lakis
Wed Nov 07, 2018 3:21 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

Thanks for fast replys. You are deploying that tool for us, so you really should expect us to use it :lol: 8) But as we know from other installations and devices that can test there throughput we never expect such tests to be real. So yeah, we tried actual traffic - maybe it was a misspoke here. We...
by Lakis
Sat Nov 03, 2018 8:38 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

Honzam how is 4173m link, any luck with the rain is it stable?
Thanks.
by Lakis
Wed Oct 31, 2018 2:56 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

Trying to work out if I should waste my time trying a 320 metre link with a pair of Wireless Wires? Don't need 1Gbit - I'd be happy with 200 bit. Is this going to fly based on people's experience with latest firmware? Dude read the fcking post here. I've post that I have 399m link working 1Gbps and...
by Lakis
Mon Oct 29, 2018 3:30 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

My working link is 2205m. Rain haven't fall in more than a month, so I don't know how it will behave. 5GHz is backup. Please look at this post: https://forum.mikrotik.com/viewtopic.php?f=7&t=133374&start=50#p680529 How did I miss that. Nice Blue nice alignment I was going to test 2000m next...
by Lakis
Mon Oct 29, 2018 12:41 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

We use LHG-60G on link ~900 meters. We have 1 gbit/sec in duplex mode bandwith-test. We try to establish link in 1.5km - fail. artferrr I m running link 1750m freq:64800 37days not a single ''link down'' 1750.png If you have time please read all posts on this topic Those are the top three records :...
by Lakis
Fri Oct 26, 2018 12:17 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

3.png
Pictures and Specifications.... Please.
by Lakis
Thu Oct 18, 2018 2:55 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

Hi all I'm starting in this world of 60Ghz .. And I'm quite surprised ... I have some doubts, since there is little information about mikrotik antennas at 60Ghz .. For example: The Mikrotik wAP 60G, the array says 60º. Vertical and Horizontal, or only Horizontal? . And if it were Horizontal, what i...
by Lakis
Sun Oct 14, 2018 5:04 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

What firmware version are you running on this link? Are you using 64800 or 66000? server8 I have very stable link at 1750m OS 6.43.2 Freq:58320. On Freq:64800 I got best RSSI around -56dB LHG60G does not support 66000. Yes it does with newest beta and only from CLI. but Worldwide-unlicensed-60-GHz-...
by Lakis
Sun Oct 14, 2018 11:51 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

What firmware version are you running on this link? Are you using 64800 or 66000?
server8 I have very stable link at 1750m
OS 6.43.2 Freq:58320. On Freq:64800 I got best RSSI around -56dB
LHG60G does not support 66000.
by Lakis
Sun Oct 14, 2018 12:11 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

server8 I have very stable link at 1750m From MUM UK • Major received signal sensitivity improvements • LHG60G can reach up to 4000 m distances (depending on used frequency) 4 km what? Is it like LHG60G signal reached 4000m but throughput was eh, than the rain start and we lost signal. Can someone f...
by Lakis
Thu Oct 04, 2018 1:06 am
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

draguzet wrote We are suprised also with results (Signal) from Lakis ? Can you please share procedure to align, we have difficulties with proper aligning LHG 60G... Dude its very hard. ------------------------ DynStatic -When you make an adjustment, the rssi won't update for seconds. blue -From time...
by Lakis
Mon Sep 17, 2018 4:44 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

1750m LHG60 ROS 6.43
lhg60 1750m.png
Freq:
58320 -59
60480 -63
62640 -62
by Lakis
Fri Aug 31, 2018 12:13 pm
Forum: Wireless Networking
Topic: MT alternatives for 17Km link?
Replies: 10
Views: 2975

Re: MT alternatives for 17Km link?

Airfiber 5 need 8w 24v?????
AF5 need 42~58v up to 40w
AF5X HD not AF5
He is searching an connector Based Radio.....
Oh that one airFiberX :)
by Lakis
Thu Aug 30, 2018 11:22 pm
Forum: Wireless Networking
Topic: LHG 60G experience
Replies: 608
Views: 192029

Re: LHG 60G experience

I am running on 6.42.6, frequency is set to auto. Disconnects are too often - 230x for 4 days uptime is insane... Distance about 340m. Clear LoS, no rain for 4 days... any idea what else should I check? Hi you should make correct alligment, i had same problem on 1950m., after correct alligment link...
by Lakis
Thu Aug 30, 2018 11:12 pm
Forum: Wireless Networking
Topic: MT alternatives for 17Km link?
Replies: 10
Views: 2975

Re: MT alternatives for 17Km link?

Airfiber 5 need 8w 24v?????
AF5 need 42~58v up to 40w
by Lakis
Mon Jun 25, 2018 11:25 pm
Forum: Wireless Networking
Topic: LHG 60G - how L4 LICENCE?
Replies: 7
Views: 2423

Re: LHG 60G - how L4 LICENCE?

wAP 60G AP 200m+ not so suitable, I need 600m+ P2MP.

gain on CPE will surely help
??
by Lakis
Mon Jun 25, 2018 3:52 pm
Forum: Wireless Networking
Topic: LHG 60G - how L4 LICENCE?
Replies: 7
Views: 2423

Re: LHG 60G - how L4 LICENCE?

wAP 60G AP 200m+ not so suitable, I need 600m+ P2MP.
by Lakis
Sun Jun 24, 2018 11:20 pm
Forum: Wireless Networking
Topic: LHG 60G - how L4 LICENCE?
Replies: 7
Views: 2423

Re: LHG 60G - how L4 LICENCE?

it's Wireless Wire Dish just today made a purchase
thanks to rado3105 I have just noticed it's L3 license
Just why Mikrotik?
by Lakis
Thu May 24, 2018 10:52 pm
Forum: Wireless Networking
Topic: Any One Wireless Expert here!
Replies: 16
Views: 3982

Re: Any One Wireless Expert here!

In your log I can see only CPEs with bad signals disconnecting. LHG->MantBox15 2km >-63 signal dude probably LOS is not so good, theoretical signal level should be in range of -50, -58 if you are sure you have good LOS maybe your mantBox angle is not adjust well MantBox is 120 degree (Horizontal El...
by Lakis
Wed May 23, 2018 12:23 am
Forum: Wireless Networking
Topic: Any One Wireless Expert here!
Replies: 16
Views: 3982

Re: Any One Wireless Expert here!

In your log I can see only CPEs with bad signals disconnecting. LHG->MantBox15 2km >-63 signal dude probably LOS is not so good, theoretical signal level should be in range of -50, -58 if you are sure you have good LOS maybe your mantBox angle is not adjust well MantBox is 120 degree (Horizontal Ele...
by Lakis
Tue May 22, 2018 12:38 pm
Forum: Wireless Networking
Topic: Any One Wireless Expert here!
Replies: 16
Views: 3982

Re: Any One Wireless Expert here!

-68,-74 are not good signals, what is CPE device's distance, also good to know noise floor, are all devices disconnecting or just CPEs with signal >-65
by Lakis
Thu May 17, 2018 1:00 pm
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

djvolt1942 shields for what?
Bergante Multipath? - don't get it!, What does the environment look like? ?!like moisture, LOS... ??
by Lakis
Thu May 17, 2018 12:20 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

Anyone tested wAP 60G (with no modification) on 210m can I get >150mbit, should I expect disconnect on light rain? Thanks. Link is up and running distance 210m, throughput is 350mbit (btest is made from wAP to wAP), 24h no disconnects for now looks promising, just waiting for the rain. Only one min...
by Lakis
Tue May 15, 2018 12:18 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 313
Views: 93132

Re: wAP 60G experience

Anyone tested wAP 60G (with no modification) on 210m can I get >150mbit, should I expect disconnect on light rain?
Thanks.
by Lakis
Tue Apr 10, 2018 10:45 am
Forum: Announcements
Topic: v6.41.4 [current]
Replies: 37
Views: 21557

Re: v6.41.4 [current]

Dear Mikrotik please for the last time fix throughput problem when hw offload is enabled on 960PGS (hEX PoE) Just add two units to hEX make a btest from 1gbit Unit to 100mbit (Or from 100mbit to 100mbit) Unit with hwofload=yes Also log show "apr/10/2018 09:43:13 system,info,critical cpu not run...
by Lakis
Sat Feb 10, 2018 12:48 pm
Forum: Announcements
Topic: v6.41.2 [current]
Replies: 124
Views: 52252

Re: v6.41.2 [current]

*) crs317 - improved transmit performance between 10G and 1G ports;
yes its fixed

but on 960PGS transmit performance between 1G and 100mbit not fixed (when hw offload enable)
by Lakis
Mon Jan 15, 2018 1:09 pm
Forum: Wireless Networking
Topic: Wireless in 2018
Replies: 18
Views: 5336

Re: Wireless in 2018

Simple question to Mikrotik. Why after setting up nv2-sync mode I got 40-50% decrease in throughput AP-client? How to make nv2-sync mode works or how 2 AP's synced should be placed on the filed? Why in P2P or P2MP scenario in 90% of cases after changing from nv2 protocol to 8011.2 or nstreme I got 2...
by Lakis
Sun Dec 24, 2017 12:52 pm
Forum: RouterBOARD hardware
Topic: CRS317 10G -> 1G traffic slow, everything else fine
Replies: 22
Views: 18373

Re: CRS317 10G -> 1G traffic slow, everything else fine

wtf waiting 2 months still
performance in 6.41 still not fixed on crs317 + tons of bugs
no fix 10gbit sfp tx rx redings
no fix PSU reading...
by Lakis
Sat Nov 25, 2017 1:35 pm
Forum: Wireless Networking
Topic: NV2 sync issues and solutions
Replies: 91
Views: 18646

Re: NV2 sync issues and solutions

just adding some info for readers here that might be of interest Syncing Ap radios is not as simple as "turning it on" , whatever brand you are going to use. also Mimosa isnt the holy grail if the design of the network isnt build for it. the have very good documentation on that : http://a...
by Lakis
Sat Nov 25, 2017 1:27 pm
Forum: Wireless Networking
Topic: Nv2 limitations??
Replies: 23
Views: 5557

Re: Nv2 limitations??

the key in AP (NV2) performance is always that

- the lowest signal client is in control of the total throughput of the AP

the way to avoid this is, is to hard set the queue on the client to lets say 80% of the possible wireless data rate.
Than why in P2P scenario 802.11 outperform nv2?
by Lakis
Thu Nov 23, 2017 3:41 pm
Forum: The Dude
Topic: x86 ROS Device SSL process spikes router CPU to 100%
Replies: 14
Views: 9059

Re: x86 ROS Device SSL process spikes router CPU to 100%

cgood "SLL CPU 100%" is not fixed yet I m also searching for solution.
in 6.38rc51
*) Fixed - Changed SSL connection timeouts. SSL connections caused CPU overload
but I m running ver. 6.40.4 SSL problem still persist.
by Lakis
Thu Nov 23, 2017 3:33 pm
Forum: The Dude
Topic: changing SSL connection default timeouts?
Replies: 1
Views: 1317

Re: changing SSL connection default timeouts?

I still have SSL cpu 100% problem ruining dude 6.40.4
Can someone help me how to change SSL connection timeouts?
by Lakis
Mon Nov 06, 2017 4:01 pm
Forum: Wireless Networking
Topic: NV2 sync issues and solutions
Replies: 91
Views: 18646

Re: NV2 sync issues and solutions

Rudy 2x SA distance between 1m protocol 802.11 same channel running better than nv2 sync. Ok, let me try to understand what you wrote.. 2x SA = 2 x SXT-SA ok So you are saying that instead of 2 SXT-AC's 1 meter apart from eachother work better with 802.11 in the same channel then when they are in N...
by Lakis
Mon Nov 06, 2017 3:46 pm
Forum: RouterBOARD hardware
Topic: FiberBox is ideal for outdoor, really?
Replies: 2
Views: 1638

Re: FiberBox is ideal for outdoor, really?

Take a look at mUPS unit, its 12v battery backup so cabling to the battery must be short so again you need extra outdoor box for the battery
+ I never recommend putting battery in sealed box outside exposed on sun.
by Lakis
Mon Nov 06, 2017 1:57 pm
Forum: Wireless Networking
Topic: NV2 sync issues and solutions
Replies: 91
Views: 18646

Re: NV2 sync issues and solutions

Rudy 2x SA distance between 1m protocol 802.11 same channel running better than nv2 sync.
by Lakis
Wed Nov 01, 2017 2:34 pm
Forum: Wireless Networking
Topic: NV2 protocol big disappointment
Replies: 24
Views: 7839

Re: NV2 protocol big disappointment

Testing SA as AP 15 clients connected SXT5 location is on remote side where interference is very very low 802.11 vs nv2 SA ethernet port is limited to 100mbit. nv2 protocol actual clients throughput plus btest(TCP 5 connections) to one client nv2.png 802.11 protocol actual clients throughput plus bt...
by Lakis
Wed Nov 01, 2017 1:34 pm
Forum: Wireless Networking
Topic: DISAPPOINTED 10Km link+netmetal+CCQ>94%+650Mbps@80Mhz < 180Mbps Throughtput
Replies: 13
Views: 3885

Re: DISAPPOINTED 10Km link+netmetal+CCQ>94%+650Mbps@80Mhz < 180Mbps Throughtput

@abernier

Power is much to high.
What is your CCQ?

Did you Scan the Channel you use?


mistry7
Yep mikrotik should integrate adaptive signal level :)
by Lakis
Wed Nov 01, 2017 1:31 pm
Forum: Wireless Networking
Topic: Dual chain enabled and no bandwith NV2
Replies: 13
Views: 2576

Re: Dual chain enabled and no bandwith NV2

Enable bout chain what is the signal on ch1?
by Lakis
Wed Nov 01, 2017 1:15 pm
Forum: Wireless Networking
Topic: NV2 protocol big disappointment
Replies: 24
Views: 7839

NV2 protocol big disappointment

I have over 10 years of experience with wireless and I have never been so disappointed and frustrated. lately nv2 protocol is just a big disaster. I already changed most of SA units to 802.11 protocol where I got far better throughput For example SA unit p2mp 20 clients all SXT Lite5 signals are fro...
by Lakis
Sun Oct 29, 2017 6:39 pm
Forum: Wireless Networking
Topic: DISAPPOINTED 10Km link+netmetal+CCQ>94%+650Mbps@80Mhz < 180Mbps Throughtput
Replies: 13
Views: 3885

Re: DISAPPOINTED 10Km link+netmetal+CCQ>94%+650Mbps@80Mhz < 180Mbps Throughtput

abernier what is the signal straight separate on chain0 and chain1
also have u tested band A/N?
by Lakis
Sat Oct 07, 2017 12:17 am
Forum: Announcements
Topic: v6.40.4 [current]
Replies: 103
Views: 45103

Re: v6.40.4 [current]

Lakis - are you using nv2? https://wiki.mikrotik.com/wiki/Manual:Nv2#Security_in_Nv2_network Yes I can see wiki "Security in Nv2 network", when nstreme or 802.11 is selected security profile appears as it should be. But if Nv2 protocol ignores security-profile setting, how can I use RADIU...
by Lakis
Fri Oct 06, 2017 1:24 am
Forum: Announcements
Topic: v6.40.4 [current]
Replies: 103
Views: 45103

Re: v6.40.4 [current]

Lakis - are you using nv2? https://wiki.mikrotik.com/wiki/Manual:Nv2#Security_in_Nv2_network Yes I can see wiki "Security in Nv2 network", when nstreme or 802.11 is selected security profile appears as it should be. But if Nv2 protocol ignores security-profile setting, how can I use RADIU...
by Lakis
Thu Oct 05, 2017 11:09 am
Forum: Announcements
Topic: v6.40.4 [current]
Replies: 103
Views: 45103

Re: v6.40.4 [current]

lotnybartek, eddieb - Send supout file from 6.40.4 which would be generated after problem has appeared to support@mikrotik.com and refer to this forum post; Lakis - You did see this tab under "Wireless/Security Profiles" on 6.40.3 version and it disappeared on 6.40.4? I can see it in term...
by Lakis
Wed Oct 04, 2017 12:05 pm
Forum: Announcements
Topic: v6.40.4 [current]
Replies: 103
Views: 45103

Re: v6.40.4 [current]

Where is wireless security profile TAB in Winbox?
by Lakis
Mon Oct 02, 2017 1:39 pm
Forum: The Dude
Topic: changing SSL connection default timeouts?
Replies: 1
Views: 1317

changing SSL connection default timeouts?

Where can I change SSL default timeouts?
by Lakis
Mon Sep 25, 2017 2:10 am
Forum: Wireless Networking
Topic: NV2 sync issues and solutions
Replies: 91
Views: 18646

Re: NV2 sync issues and solutions

WirelessRudy it rely sucks when u have new non working future :) NV2 sync just doesn't work for me too, I would love to know how MT technicians perform their test in what scenario NV2 sync should work. Also since implementing "download ratio settings" NV2 become 'weird' in some way I wrote...
by Lakis
Fri Aug 18, 2017 1:23 pm
Forum: RouterBOARD hardware
Topic: CCR1072-1G-8S+ Performance Advice
Replies: 3
Views: 1860

Re: CCR1072-1G-8S+ Performance Advice

Sorry copy-paste mistake I meant CCR1072-1G-8S+!
by Lakis
Thu Aug 17, 2017 3:29 pm
Forum: RouterBOARD hardware
Topic: CCR1072-1G-8S+ Performance Advice
Replies: 3
Views: 1860

CCR1072-1G-8S+ Performance Advice

Can CCR1072-1G-8S+ handle 4000+ Simple Queues 4000+ NAT rules max 20 firewall filter rules, no PPoE Simple routing 2gbit traffic ? what is expected CPU usage? Now we use x86 as Router 4xXeon 3200Mhz cpu max 30%- Problem x86 does not support SFP+ (there is no hardware upgrade from AxiomTech) so inste...
by Lakis
Fri Aug 04, 2017 1:50 am
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 29944

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

n21roadie@: when nstreeme selected please make btest only receive and only send see the difference. (Disconnect is possible one side collocation interference)[/quote] It must be co-location interference as the disconnections occur during the first few mins after wireless registration as the data rat...
by Lakis
Thu Aug 03, 2017 1:18 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 29944

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

TomjNorthIdaho less 5% CPU load is almost noting in v6.40 Changelog *) wireless - reduced load on CPU for high speed wireless links; yes with nv2 downlink settings there is increase of throughput but only I can see benefit on P2P on P2MP its awful. I have made tests on 19km link (BaseBox5 Jurlios An...
by Lakis
Tue Aug 01, 2017 3:52 pm
Forum: Wireless Networking
Topic: Nv2-downlink-ratio - new huge bandwidth increase setting
Replies: 67
Views: 29944

Re: Nv2-downlink-ratio - new huge bandwidth increase setting

I've tested on Omnitik AC (set on A/N Ce channel) (15 SXT Clients connected, signals 45-60) when fixed mode selected Ratio=60,70,80% throughput is worst than ever, I got better throughput with dynamic-downlink selected, but not as good as nv2 in v6.37.1 This one I could not understand why I have far...
by Lakis
Sat Jul 08, 2017 8:46 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 65170

Re: v6.40rc [release candidate] is released! (New bridge implementation)

"Bridge will handle all Layer2 forwarding and the use of switch-chip (hw-offload) "

What about bonding? How bridge will use switch-chip?
by Lakis
Fri Apr 28, 2017 11:27 pm
Forum: Announcements
Topic: v6.39 [current]
Replies: 89
Views: 53720

Re: v6.39 [current]

Winbox Wireless Security profile missing
by Lakis
Fri Apr 07, 2017 12:44 pm
Forum: RouterBOARD hardware
Topic: RB1200 more information
Replies: 24
Views: 13636

Re: RB1200 more information

It is old device. Ahx2 is current and also quite old while ahx4 is ready to come in near future. You can get sfp+ on other more powerful devices....
my mistake I meant RB1100Ahx4?
by Lakis
Thu Apr 06, 2017 1:29 pm
Forum: RouterBOARD hardware
Topic: RB1200 more information
Replies: 24
Views: 13636

Re: RB1200 more information

why RB1100AH no SFP+?
by Lakis
Sat Apr 01, 2017 12:25 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2017: new hardware incoming!
Replies: 86
Views: 30450

Re: MUM Europe 2017: new hardware incoming!

RB1100AHx4 no sfp+? mUPS love the idea but you need extra case for battery!?! extra cabling,12v .... cable length limited, mUPS is for outdoor use so why no bigger case just to fit one 7Ah battery...also if u use extra case for battery it must be close to mUPS (max 3m /12V) and be really careful whe...
by Lakis
Wed Mar 08, 2017 6:02 pm
Forum: Announcements
Topic: Statement on Vault 7 document release
Replies: 92
Views: 84911

Re: Statement on Vault 7 document release

''the CIA supposedly has tools that can inject malicious tools into RouterOS devices,'' it's not possible to do that without admin password second ROS kernel is closed not like Ubq source code That's why CIA ''supposedly'' has tools Any way how can I find if, how or ''supposedly'' my router is infec...
by Lakis
Sat Jan 07, 2017 4:45 pm
Forum: Announcements
Topic: The Dude, v6.39rc test builds.
Replies: 121
Views: 58360

Re: The Dude, v6.39rc test builds.

In log when a service is down, the message for it should be in red color like in v3.6
Also, future request, if we can add custom color for log messages from some specified services?

Thanks.
by Lakis
Mon Dec 12, 2016 1:09 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

Still SSL cpu load problem v6.38rc47
by Lakis
Wed Dec 07, 2016 12:59 am
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

Changes since 6.38rc37 chimaster Also it would be great if you could provide us with remote access to device with SSL load problem. support@mikrotik.com If you can repeat problem, please write to support@mikrotik.com. I confirm this, there is some SSL load problem on x86 OS 6.38rc40, reboot fixed f...
by Lakis
Wed Nov 30, 2016 3:48 pm
Forum: The Dude
Topic: The Dude, v6.37 [current] release.
Replies: 47
Views: 21816

Re: The Dude, v6.37 [current] release.

Just a sec.
Does all fixes until 6.38rc37 are included in 6.37.3, and if we already have installed some of 6.38rc version basicly we have to do downgrade to 6.37.3
But if 6.38rc37=6.37.3 than we should do noting :)
by Lakis
Fri Nov 11, 2016 12:22 am
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

Try putting the image files in the dude/files/images dir. Mibs go in the dude/files/mibs dir. I found it much easier to use ftp than Winbox.
x86 /dude/files/ dir it works thanks
by Lakis
Wed Nov 09, 2016 3:52 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

Its not your job, but how did you upload pictures? Pictures in the dude? Used to upload vía thedude client, but now it's only possible via winbox or ftp... or SMB too Thanks, yes I can upload via Winbox or FTP but the problem for example how do I place some picture in dude/files/default/images dir ...
by Lakis
Tue Nov 08, 2016 12:05 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

Hi, switch to snmpv2, try it.
Here work when i change
i switch to snmpv2 and i had to restart switch and now it works...thank you,

Its not your job, but how did you upload pictures?
by Lakis
Sat Nov 05, 2016 12:09 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

ver rc24, I tested and retested Services, probes finally are working correctly, also some device appearance issues are fixed - please don't brake it :). I have demand if its possible to be added wireless access list TAB in device RouterOS TAB? Also probably there is a reason why upload is disabled, ...
by Lakis
Tue Nov 01, 2016 4:41 pm
Forum: RouterBOARD hardware
Topic: Q2 2016 But still no Gigabit PoE Routerboard...
Replies: 53
Views: 13567

Re: Q2 2016 But still no Gigabit PoE Routerboard...

Finally something
https://routerboard.com/RB960PGS

I know also OmniTIk AC PoE out gbit is comping soon on market
but what about other GBit with 6 or 8 or 10 PoE out ports??
by Lakis
Fri Oct 28, 2016 12:38 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

Lakis wrote: If Dude lose connection to Some device, device go red - normal but values like cpu, mem are stuck showing last value on device appearance When device is on-line again, dude ping service is up but other SNMP services are down (timeout). I tried Reprobe - not helping Only when I reboot D...
by Lakis
Thu Oct 27, 2016 2:32 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

Lakis we are having a similar problem, SNMP queries will stop going out from the DUDE server after a short while. We confirmed that there was no SNMP request leaving the dude server after about 5 minuets of operation, a reboot will get it working again for a short while. We are running the dude fro...
by Lakis
Fri Oct 21, 2016 5:32 pm
Forum: General
Topic: London UK MUM 2016 - Nov 14th
Replies: 40
Views: 8161

Re: London UK MUM 2016 - Nov 14th

You Brits are so lucky. :)
by Lakis
Wed Oct 19, 2016 1:18 pm
Forum: Wireless Networking
Topic: P Throughput Question
Replies: 2
Views: 1383

Re: P Throughput Question

"P Throughput" means theoretical throughput from AP to client Lets put this as Example: For instance you do btest and you get 30mbit throughput from AP to your 3 clients one at the time, this does not mean your AP can give 90mbits of throughput 3x30mbits on each client in the same time, bu...
by Lakis
Wed Oct 19, 2016 12:44 pm
Forum: General
Topic: Losing Interface graphs after reboot
Replies: 3
Views: 2118

Re: Losing Interface graphs after reboot

I need az USB stick to store graphs on it? What i need to configure? This is old post - active again - Probably you don't need usb stick-not supported graphs don't use lot of space if you are losing your graphs after reboot simply It may be related to your RB clock, just setup NTP client and put co...
by Lakis
Wed Oct 19, 2016 12:28 pm
Forum: The Dude
Topic: Upgrade to 6.37.1 on CCR broke The Dude
Replies: 4
Views: 2205

Re: Upgrade to 6.37.1 on CCR broke The Dude

Bossman when you start your client in windows try starting .exe file -Run as administrator- than upgrade will be done
If this does not work uninstall current dude, install v6.34.6 again Run as administrator <-- this should work
by Lakis
Wed Oct 19, 2016 12:21 pm
Forum: The Dude
Topic: The Dude on Windows - No Server .exe?
Replies: 2
Views: 5822

Re: The Dude on Windows - No Server .exe?

No more windows server support
for windows use older v3.6 or v4
by Lakis
Wed Oct 19, 2016 12:04 am
Forum: The Dude
Topic: Dude v6.37 execute on server question
Replies: 3
Views: 3062

Re: Dude v6.37 execute on server question

If your user and pass are correct Try New Terminal > user group print 0 name="read" policy=local,telnet,ssh,reboot,read,test,winbox,password,web,sniff,sensitive,api,romon,!ftp,!write,!policy,!dude skin=default 1 name="write" policy=local,telnet,ssh,reboot,read,write,test,winbox,p...
by Lakis
Mon Oct 17, 2016 12:12 pm
Forum: General
Topic: Question for Mikrotik team & a new way of thinking
Replies: 6
Views: 1863

Re: Question for Mikrotik team & a new way of thinking

I don't think you need to write elaborate scripts to achieve that. The menu /interface bridge filter has the option to configure filter based on source and destination MAC address and you also have a mask option, so you should be able to filter specific OUIs, and hence filter the source Ethernet fr...
by Lakis
Mon Oct 17, 2016 12:04 pm
Forum: General
Topic: Question for Mikrotik team & a new way of thinking
Replies: 6
Views: 1863

Re: Question for Mikrotik team & a new way of thinking

hello rulers of Mikrotik planet just wondering here if there is a method or script to block any range of mac addresses by vendors let say i want to block all tp-link or all d-link or all belkin mac addresses to lower the risk of anyone connecting with these devices to my network,is it possible ? ca...
by Lakis
Sat Oct 15, 2016 12:55 pm
Forum: RouterBOARD hardware
Topic: Q2 2016 But still no Gigabit PoE Routerboard...
Replies: 53
Views: 13567

Re: Q2 2016 But still no Gigabit PoE Routerboard...

It was likely held up waiting for the new "mmips" architecture. Not a bad thing I guess :)
Likely yes, mmips or mips will do the jоb, what about 6 or 8 or 10 Poe Out models, answеr is always ''Other unannounced models also incoming. pls. stand by'' and we wait and wait
by Lakis
Wed Oct 12, 2016 2:25 pm
Forum: Announcements
Topic: v6.38rc [release candidate] is released
Replies: 331
Views: 122424

Re: v6.38rc [release candidate] is released

What's new in 6.38rc12 (2016-Oct-11 10:35):

Changes since 6.38rc10:
*) health - show power consumption on devices which has voltage and current monitor;
Nice future will be if you can add in system health total consumption on PoE devices - sum of all Ethernet (PoE out Power)
by Lakis
Mon Oct 10, 2016 4:40 pm
Forum: The Dude
Topic: Dude 6.36 on CCR1036 hight cpu and disk usage
Replies: 5
Views: 2305

Re: Dude 6.36 on CCR1036 hight cpu and disk usage

Report to the support
by Lakis
Mon Oct 10, 2016 12:39 pm
Forum: The Dude
Topic: Russian font in The Dude
Replies: 9
Views: 8336

Re: Russian font in The Dude

Its simple, you can upload font with Cyrillic support than in settings-MAP tab you can select desired font . But unfortunately for now upload is disabled.
by Lakis
Fri Oct 07, 2016 12:47 am
Forum: The Dude
Topic: Dude 6.36 on CCR1036 hight cpu and disk usage
Replies: 5
Views: 2305

Re: Dude 6.36 on CCR1036 hight cpu and disk usage

If it's dude related, this also happen to me when I try downgrading from 6.37rc to 6.36 but on x86
than upgrade again to 6.37rc fix the problem
but to be sure check tools-profile processes
by Lakis
Wed Oct 05, 2016 4:03 pm
Forum: RouterBOARD hardware
Topic: New CPU - new product RB750Gr3 - RB750G family - now mmips
Replies: 180
Views: 98012

Re: New CPU - new product RB750Gr3 - RB750G family - now mmips

Ok I see that hEX is RB750Gr2... a little confusing, those marketing names, especially when there is no 1:1 mapping between marketing names and technical names. Would it not be better to call it "hEX plus" or something? When you look at the cars - "BMW 320" marketing name also r...
by Lakis
Tue Oct 04, 2016 3:37 pm
Forum: RouterBOARD hardware
Topic: Q2 2016 But still no Gigabit PoE Routerboard...
Replies: 53
Views: 13567

Re: Q2 2016 But still no Gigabit PoE Routerboard...

in Spain (MUM) they have said gigabit PoE switch will hit the marked till the end of month now its October
by Lakis
Mon Oct 03, 2016 12:08 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

To Ham
Glad to hear that its not just me, I've searched the source of the problem for days, probably it's just a bug.
I m running my Dude on x86
by Lakis
Thu Sep 29, 2016 5:15 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 67368

Re: v6.37 [current] is released!

After upgrade to 6.37 with DFS, when I change frekvency --> then is AP with fixed frekvency (5620Mhz) 10minutes detecting radar (without clients) and after 10minutes is runnig AP. It is normal? When using 5600-5650MHz, ETSI requires to search for 10 minutes, this is in the regulations. You should u...
by Lakis
Thu Sep 29, 2016 2:49 pm
Forum: General
Topic: Preventing same MAC in access list?
Replies: 1
Views: 889

Preventing same MAC in access list?

Haw can I prevent this?
samemac.png
Or disable it, not to be allowed putting same MAC in wireless access list .
by Lakis
Thu Sep 29, 2016 12:47 pm
Forum: The Dude
Topic: The Dude, v6.38rc test builds.
Replies: 189
Views: 60636

Re: The Dude, v6.38rc test builds.

Can u reproduce this problem dudebug.png As u can see on the picture (in label appearance) Dude can read two functions but probe says "time out" After rebooting Mikrotik Device - where Dude is installed all back to normal for some time Edit. I inspected the problem, I come to this findings...
by Lakis
Thu Sep 29, 2016 12:20 pm
Forum: The Dude
Topic: Add Device in Dude 6.37
Replies: 1
Views: 1200

Re: Add Device in Dude 6.37

parse failed - if the oid is correct it may be something wrong with the code in function if u have some experience reedit function code "has the green color but in the bottom line it says parse failed" - device has a green color because "probably" u did not add probe, u just have...
by Lakis
Tue Sep 27, 2016 12:29 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 67368

Re: v6.37 [current] is released!

RouterOS v7 is currently in early alpha and there is no scheduled release date yet.
:cry:
Until than I'll sit on my chair and wait :) while clicking refresh button on mikrotik download page
by Lakis
Tue Sep 27, 2016 12:07 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 67368

Re: v6.37 [current] is released!

is that all? :lol: Nice job. Almost feels like you are near to a final version of v6.... :D i herad that they are working on version 7. and version 7 isn't a joke. thats what Mr. Janis said in USA's MuM in april 2016. i am wondering what are they trying to create. What is so spacial in v7?
by Lakis
Tue Sep 27, 2016 2:58 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 67368

Re: v6.37 [current] is released!

Since 6.35.2 SFP info is not showing up!!? (rb2011UAS,LS) Hi Lakis I was always told by Mikrotik that until the "i" release (UiAS, iLS, etc) the 2011's didn't have the hardware for DDMI (the SFP info) I believe Mikrotik is now hiding the tab when there is no useful information on it. Rega...
by Lakis
Tue Sep 27, 2016 2:42 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 67368

Re: v6.37 [current] is released!

v37 on x86 sep/27 02:23:04 interface,info ether1 link up (speed 65535M, half duplex) sep/27 02:23:04 interface,info ether2 link up (speed 65535M, half duplex) sep/27 02:23:05 interface,info ether3 link up (speed 65535M, half duplex) sep/27 02:23:05 interface,info ether4 link up (speed 65535M, half d...
by Lakis
Sat Sep 24, 2016 12:07 pm
Forum: The Dude
Topic: The Dude, v6.37rc test builds.
Replies: 92
Views: 30404

Re: The Dude, v6.37rc test builds.

Changes in 6.37rc42 - Disabled upload and drag&drop feature in Dude, for file management use Winbox, Webfig or ftp. - Dude client will be instantly disconnected when the Dude server has stopped. We will include fix for this in next releases. I am able to upload files to Dude via Winbox. I am un...
by Lakis
Sat Sep 24, 2016 11:44 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 67368

Re: v6.37 [current] is released!

Since 6.35.2 SFP info is not showing up!!? (rb2011UAS,LS) Hi Lakis I was always told by Mikrotik that until the "i" release (UiAS, iLS, etc) the 2011's didn't have the hardware for DDMI (the SFP info) I believe Mikrotik is now hiding the tab when there is no useful information on it. Rega...
by Lakis
Sat Sep 24, 2016 1:25 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 67368

Re: v6.37 [current] is released!

Since 6.35.2 SFP info is not showing up!!? (rb2011UAS,LS)
by Lakis
Wed Sep 21, 2016 1:22 pm
Forum: The Dude
Topic: BACKUP THE DUDE
Replies: 5
Views: 16159

Re: BACKUP THE DUDE

What was confusing is export/import buttons are removed

v37rc
637rc.png
v3.6
36.png
now u have to do via terminal
/dude export-db backup-file=(file_name_path)
by Lakis
Tue Sep 20, 2016 4:13 pm
Forum: The Dude
Topic: The Dude, v6.37rc test builds.
Replies: 92
Views: 30404

Re: The Dude, v6.37rc test builds.

RC38 Note: For example, if I change the interface to "wlan1", Dude will display the result for wlan1, but the entry continues to display the first entry, in my case, "bridge1". minimap.png [/quote] yes in RC38 something is fixed, but yes what ever u select entry still stays &quo...
by Lakis
Fri Sep 16, 2016 11:31 pm
Forum: The Dude
Topic: New Dude to Backup Routers
Replies: 23
Views: 8988

Re: New Dude to Backup Routers

Well not to pull but u can send from some device in network to mikrotik device that Dude is installed or some external ftp server Create Scheduler in mikrotik device Something like that /system backup save name=test /tool fetch address=(Dude Ip) src-path=test.backup mode=ftp user=(dude usr.) passwor...
by Lakis
Fri Sep 16, 2016 4:35 pm
Forum: The Dude
Topic: The Dude, v6.37rc test builds.
Replies: 92
Views: 30404

Re: The Dude, v6.37rc test builds.

rc36
Interface throughput bug
linkt.png
Also some graphical problem with mini map
minimap.png
by Lakis
Thu Sep 15, 2016 7:18 pm
Forum: The Dude
Topic: Probe (if () do ros coomand) Problem
Replies: 7
Views: 3431

Re: Probe (if () do ros coomand) Problem

Create a notification with execute and put the reboot command in the notification...
new notification
Name: Reboot
enabled
type: execute on server
ros_command("/system reboot")
...
Thats good one and it works this way :)
Thanks lebowski
I will post "solution" code later
by Lakis
Thu Sep 15, 2016 11:41 am
Forum: The Dude
Topic: Probe (if () do ros coomand) Problem
Replies: 7
Views: 3431

Re: Probe (if () do ros coomand) Problem

"Function: get_rb_cpu_load Code: if(string_size(oid("1.3.6.1.2.1.25.3.3.1.2.1", 10 ,5)), oid("1.3.6.1.2.1.25.3.3.1.2.1", 10, 5)+1 ,"False") Probe Name: high cpu reboot Type: Function Agent: default Available: get_rb_cpu_load() <> "False" Error: if(get_rb_...
by Lakis
Thu Sep 15, 2016 1:29 am
Forum: The Dude
Topic: Probe (if () do ros coomand) Problem
Replies: 7
Views: 3431

Re: Probe (if () do ros coomand) Problem

Thanks lebowski First I want to use this probe on OmniTIK U-5HnD, I send a lot of post about high cpu usage problem, I never find out what is triggering this anomaly from time to time, from some users on this forum (that have same experience) a read that its lack of memory problem and only happens i...
by Lakis
Wed Sep 14, 2016 12:22 am
Forum: The Dude
Topic: The Dude, v6.37rc test builds.
Replies: 92
Views: 30404

Re: The Dude, v6.37rc test builds.

in r34
attention.png
also transferring files is like forever
trans.png
am I missing something
by Lakis
Sun Sep 11, 2016 4:43 pm
Forum: RouterBOARD hardware
Topic: Q2 2016 But still no Gigabit PoE Routerboard...
Replies: 53
Views: 13567

Re: Q2 2016 But still no Gigabit PoE Routerboard...

I will attend to the next MUM in Spain if and only if Mikrotik finally announces Gbit PoE Routerboards, and if not everyone should boycott it :)
by Lakis
Fri Sep 09, 2016 12:46 pm
Forum: The Dude
Topic: Probe (if () do ros coomand) Problem
Replies: 7
Views: 3431

Re: Probe (if () do ros coomand) Problem

Still no one has idea haw can I accomplish this
"Error: if(get_rb_cpu_load()<90, "", ros_command("/system reboot"))"

Is there another way?
any idea will be appreciated.
by Lakis
Tue Sep 06, 2016 3:03 am
Forum: The Dude
Topic: Probe (if () do ros coomand) Problem
Replies: 7
Views: 3431

Probe (if () do ros coomand) Problem

Hi, I have some issue with CPU usage probes First Ive made this function Name: get_rb_cpu_load Description: get router cpu load Code: ros_command(":put [/system resource get cpu-load]") And this is my first Probe Name: high cpu usage Type: Function Agent: default Available: get_rb_cpu_load...
by Lakis
Wed Aug 31, 2016 1:22 pm
Forum: The Dude
Topic: The Dude, v6.36 [current] release.
Replies: 48
Views: 18835

Re: The Dude, v6.36 [current] release.

@krisjanis: I have problem with the display SNMP functions on tooltips of network maps. My tooltips setup is in default: maps.Device [Device.Name] ([Device.Type]) IP: [Device.AddressesCommaList] MAC: [Device.MacAddressesCommaList] [services_info()][snmp_name()][snmp_description()][snmp_uptime()][sn...
by Lakis
Sat Aug 27, 2016 12:59 am
Forum: The Dude
Topic: The Dude, v6.37rc test builds.
Replies: 92
Views: 30404

Re: The Dude, v6.37rc test builds.

Two questions

1. How to set Time Zone in Dude (in Router Time Zone is correct not in Dude)
2. I need command to clean all Dude database - return Dude to default like "system reset no-default=yes"

Thanks.

Edit: After changing Time Zone in Router after less than 1h Dude corrected time.
by Lakis
Thu Aug 25, 2016 4:31 pm
Forum: General
Topic: After Netinstall got new Sof. ID
Replies: 6
Views: 1666

Re: After Netinstall got new Sof. ID

Yes I did that but new Software ID remains.
by Lakis
Thu Aug 25, 2016 1:29 pm
Forum: General
Topic: After Netinstall got new Sof. ID
Replies: 6
Views: 1666

Re: After Netinstall got new Sof. ID

I removed original Disk from original PC and placed on second PC while there is no other HDD disc attached to second PC only original Disk and do netinstal can't find answer on this forum if case is different pc controller I will try to find a way to reinstall MT on original PC
by Lakis
Thu Aug 25, 2016 12:00 am
Forum: General
Topic: After Netinstall got new Sof. ID
Replies: 6
Views: 1666

After Netinstall got new Sof. ID

Hi. Had some problems with MT ROS on x86 (kernel panic) ver. 6.24 at the end I had to do netinstall (with last OS ver. 6.37 rc20) but because this x86 doesn't support boot from Lan I had to put HDD on difrent x86 (PC that support boot from Lan) everything went well but after installation finished MT...
by Lakis
Wed Aug 10, 2016 11:09 pm
Forum: RouterBOARD hardware
Topic: Does MT support Cisco SFP modules?
Replies: 3
Views: 7376

Re: Does MT support Cisco SFP modules?

Thanks mrz yes I found that but it's wiki not mikrotik official
Thanks doneware
by Lakis
Mon Aug 08, 2016 3:17 pm
Forum: RouterBOARD hardware
Topic: Does MT support Cisco SFP modules?
Replies: 3
Views: 7376

Does MT support Cisco SFP modules?

We need to do some upgrade but bad news we must use Cisco ASR 901 SFP module
Item Name:SFP-10G-LR
Description:10GBASE-LR SFP Module
Does MT OS support this module
We want to use this SFP module with CCR1036-8G-2S+EM
Thanks.
by Lakis
Mon Jul 04, 2016 12:08 pm
Forum: RouterBOARD hardware
Topic: Q2 2016 But still no Gigabit PoE Routerboard...
Replies: 53
Views: 13567

Re: Q2 2016 But still no Gigabit PoE Routerboard...

Still no news.... :) 
by Lakis
Sat May 28, 2016 12:41 pm
Forum: RouterBOARD hardware
Topic: New OmniTik Poe 16MiB HDD size
Replies: 2
Views: 1163

New OmniTik Poe 16MiB HDD size

C'mon only 16MiB
otik.png
by Lakis
Tue May 17, 2016 1:29 pm
Forum: RouterBOARD hardware
Topic: Q2 2016 But still no Gigabit PoE Routerboard...
Replies: 53
Views: 13567

Q2 2016 But still no Gigabit PoE Routerboard...

There are tons of Gigabit PoE manageable switches on internet but still Mikrotik has none. (Except in MUM Ljublana) Ubq has realised EdgePoint Gigabit PoE Router, nice made and very practical but most of us 70-90% of equipment is mikrotik so in my interest its best to use Mikrotik made PoE Routerboa...
by Lakis
Tue Dec 29, 2015 1:36 am
Forum: Wireless Networking
Topic: OmniTIK U-5HnD high CPU problem in 6.x OS
Replies: 6
Views: 2105

Re: OmniTIK U-5HnD high CPU problem in 6.x OS

So only solution is to replace these OmniTiks with OT UP ?!? I had no replay from support.
by Lakis
Wed Dec 23, 2015 10:52 pm
Forum: Wireless Networking
Topic: OmniTIK U-5HnD high CPU problem in 6.x OS
Replies: 6
Views: 2105

Re: OmniTIK U-5HnD high CPU problem in 6.x OS

pukkita : "in tools profile I see wireless is above 40-45%" Ive had used almost all 6.x OS ver. problem persist, we have almost 50 OmnTiks in our network 50% Are UPA OmniTIk witch dont have this problem , all up to date firmware and OS jadra yes maybe this problem is related to lack of mem...
by Lakis
Wed Dec 23, 2015 2:52 pm
Forum: Wireless Networking
Topic: OmniTIK U-5HnD high CPU problem in 6.x OS
Replies: 6
Views: 2105

OmniTIK U-5HnD high CPU problem in 6.x OS

Since 6.x OS version we have strange problem with OTik U-5HnD I wrote about this long time ago but its not fixed yet, ones a week or on every 2-4 days CPU some how for some reason goes over 50% in tools profile I see wireless is above 40-45%, clients throughput is very slow, or in some cases clients...
by Lakis
Sat Dec 05, 2015 1:15 am
Forum: The Dude
Topic: The Dude is back! v6.34rc test build released
Replies: 269
Views: 103542

Re: The Dude is back! v6.34rc test build released

What's new in 6.34rc16 (2015-Dec-04 14:10):

*) dude - “The reports of my death have been greatly exaggerated”;
LOL
Epic.. :)
by Lakis
Fri Nov 06, 2015 3:17 pm
Forum: Wireless Networking
Topic: Great news ROS v6.33, wireless transfers over single stream TCP connections will have nearly double the speed.
Replies: 9
Views: 2738

Great news ROS v6.33, wireless transfers over single stream TCP connections will have nearly double the speed.

Great news
Quote ,,The change only affects 802.11 protocols on 802.11ac chips in RouterBOARD devices,,
When we will expect improvements for nv2 protocol? Why does it apply only for ac chips ''at the moment''?
by Lakis
Fri Nov 06, 2015 3:08 pm
Forum: Wireless Networking
Topic: Very slow connection using MikroTik, ubnt works fine.
Replies: 3
Views: 1620

Re: Very slow connection using MikroTik, ubnt works fine.

Lakis - Nv2 will not work if both kinds of devices need to use the same AP (nv2 is only for MikroTik devices).
pturkey - how did you measure 'slow'? what exactly is slow?
Sorry I meant he should try activate nv2 for a short time,all UBQ Cpe's will disconnect and make tests
by Lakis
Thu Nov 05, 2015 3:07 pm
Forum: Wireless Networking
Topic: Very slow connection using MikroTik, ubnt works fine.
Replies: 3
Views: 1620

Re: Very slow connection using MikroTik, ubnt works fine.

Did u activate nv2 on wireless protocol TAB?
by Lakis
Thu Nov 05, 2015 3:03 pm
Forum: Wireless Networking
Topic: NV2 TDMA Period Size
Replies: 4
Views: 4488

Re: NV2 TDMA Period Size

In reality I dont see any differences changing TDMA period size, it may only have some minor improvements for a certain part of day
by Lakis
Fri May 22, 2015 2:22 pm
Forum: General
Topic: Redirect Public IP to Public IP
Replies: 5
Views: 3908

Re: Redirect Public IP to Public IP

Yep it works NAT rules in MT Router 10.10.10.11 0 chain=dstnat action=dst-nat to-addresses=11.11.11.11 protocol=tcp in-interface=ether1 <WAN> dst-port=!8291 log=no log-prefix="" (Redirect all ports except 8291 winbox port) 1 chain=srcnat action=masquerade out-interface=ether1 <WAN> log=no ...
by Lakis
Fri May 22, 2015 12:51 am
Forum: General
Topic: Redirect Public IP to Public IP
Replies: 5
Views: 3908

Re: Redirect Public IP to Public IP

I don't get u really redirect.jpg MT router does not need masquerade rule its just a router somewhere configured with public static ip:10.10.10.11, just need dst rule to redirect to 11.11.11.11 What I need is when I enter ip:10.10.10.11 on my pc traffic from MT router to be redirected to web server ...
by Lakis
Thu May 21, 2015 11:01 pm
Forum: General
Topic: Redirect Public IP to Public IP
Replies: 5
Views: 3908

Redirect Public IP to Public IP

Any idea how can I redirect Public to Public IP example: I have router A Public IP :10.10.10.11 and router B Public IP: 11.11.11.11 Now from my pc from different location I want to do when I enter IP:10.10.10.11 on my Mozilla or Chrome (Router A) automatically to be redirected on router B (IP 11.11....
by Lakis
Thu Apr 30, 2015 11:50 am
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 92667

Re: RouterOS v6.28 released

Well it looks like i touched a nerve. Look I believe that Mikrotik is a fantastic system. But I am noticing an ongoing problem with NV2 and TCP connections. And as everyone here knows TCP works in multiple streams However. When your delivering a 25 Meg Connection to a user and they get on a speedie...
by Lakis
Wed Apr 29, 2015 2:52 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 92667

Re: RouterOS v6.28 released

macgaiver: 'cause PtP it works as it should' - using nv2 hm... 99% I am not sure about that, well you should try nstreme and see how it should work - except disconnect problem (yep ste:nstreme is very sensitive to interference) but noting is done past 2 years. And again Mikrotik please give me a sim...
by Lakis
Tue Apr 28, 2015 12:54 pm
Forum: Announcements
Topic: RouterOS v6.28 released
Replies: 229
Views: 92667

Re: RouterOS v6.28 released

Hate to sound like a broken record. But we really need some fixed for TCP traffic over NV2. Any Idea when that is going to happen. To less people urge Mikrotik to do work for this. I tried for a long time now. My only solution is to replace MT where I see this problem. I am afraid i am going to hav...
by Lakis
Fri Apr 03, 2015 1:14 pm
Forum: Wireless Networking
Topic: NV2 speeds really bad with ver 6.27
Replies: 10
Views: 3570

Re: NV2 speeds really bad with ver 6.27

Sometimes nv2 works good but most of the times bad :)
by Lakis
Sun Mar 08, 2015 11:17 pm
Forum: General
Topic: Good signal but no Link on sfp interface
Replies: 4
Views: 3704

Re: Good signal but no Link on sfp interface

Try turning autoneg off or on
Yes that helped but only when AutoNeg is off
only when
auto-negotiation=no
speed=1Gbps
full-duplex=yes
on both sides
Txn. But have u any idea why is that?
by Lakis
Sun Mar 08, 2015 9:16 pm
Forum: General
Topic: Good signal but no Link on sfp interface
Replies: 4
Views: 3704

Re: Good signal but no Link on sfp interface

connecting 1550 to 1310 would not work :D
:) wavelengths rx/tx are different S-5x=TX:1550nm RX:1310 S-3x=TX:1310 RX:1550
812_l.jpg
by Lakis
Fri Mar 06, 2015 10:22 pm
Forum: General
Topic: Good signal but no Link on sfp interface
Replies: 4
Views: 3704

Good signal but no Link on sfp interface

There is good signal but no link on sfp interface. Hardware is CRS212 and RB2011iLS
sfp.png
Are there some compatibility issue?
On same fiber I Tested CRS212 and RB2011LS running fine
Is it possible to be some hardware problem on RB2011iLS SFP port?
by Lakis
Mon Feb 09, 2015 8:41 pm
Forum: Wireless Networking
Topic: 6.22 routeros wireless high cpu usage
Replies: 9
Views: 4665

Re: 6.22 routeros wireless high cpu usage

In Interface Queue set wireless Queue type=wireless default if this option is already set, also set ether devices queue type=ethernet-default, that solve my high cpu problem.
by Lakis
Sun Feb 08, 2015 2:39 am
Forum: Wireless Networking
Topic: Ubiquity airfiber 5x
Replies: 16
Views: 8822

Re: Ubiquity airfiber 5x

You know Its so fanny everyone claim 850Mbit data rate or to be more precise 500+Mbit real throughput but no one says in "what condition", second till today I never saw real official test and yes official from Mikrotik, not even from Mikrotik users that succeed near that speed except and o...
by Lakis
Fri Feb 06, 2015 5:27 pm
Forum: Wireless Networking
Topic: Ubiquity airfiber 5x
Replies: 16
Views: 8822

Re: Ubiquity airfiber 5x

rado3105 sorry for my sarcasm I use AirFiber and I m very happy with it
still there is no answer to AirFiber or new ubnt airprism technology
Speed is not the problem, interference is biggest problem but in that field Mikrotik has noting to offer
by Lakis
Fri Feb 06, 2015 2:42 am
Forum: Wireless Networking
Topic: Wireless Throughput config
Replies: 21
Views: 4936

Re: Wireless Throughput config

try to using fast patch and follow the fast path rules and regulation. on eC bandwidth i can get about 150M/150M... Sorry to ask but what you mean " follow the fast path rules and regulation" ? Fast path only apply for firewall, probably he want to say something about queue types in Queue...
by Lakis
Thu Feb 05, 2015 3:56 pm
Forum: Wireless Networking
Topic: Ubiquity airfiber 5x
Replies: 16
Views: 8822

Re: Ubiquity airfiber 5x

response to that !? :)
by Lakis
Sun Jan 18, 2015 9:28 pm
Forum: RouterBOARD hardware
Topic: Any plans for GBit PoE out ethernet router
Replies: 7
Views: 2651

Re: Any plans for GBit PoE out ethernet router

We always have ideas, but we don't disclose them until there is something substantial to announce.
Thank you for the suggestions.
So are there any chances for some announcements in the near future? I believe that by now you should have had such products.
by Lakis
Sun Jan 18, 2015 3:29 pm
Forum: Wireless Networking
Topic: How to do MAC Filtering?
Replies: 3
Views: 6568

Re: How to do MAC Filtering?

In Wireless Tables go to security profiles TAB create new profile add name mac filter select mode=none in Radius TAB mark/select MAC authentication and press OK In Wireless Tables in Access List TAB add desired Mac address and at the end on wireless interface on your wifi card (wlan1) in Wireless TA...
by Lakis
Sun Jan 18, 2015 1:13 am
Forum: Wireless Networking
Topic: Wireless Throughput config
Replies: 21
Views: 4936

Re: Wireless Throughput config

On the client side wireless protocol is set to nstreme,nv2,802.11 on AP is set to 802.11
Set wireless protocol nstreme or nv2 on AP side and any on client side
by Lakis
Sun Jan 11, 2015 11:20 pm
Forum: RouterBOARD hardware
Topic: Any plans for GBit PoE out ethernet router
Replies: 7
Views: 2651

Any plans for GBit PoE out ethernet router

Any plans for GBit PoE out ethernet router and when?
by Lakis
Thu Jan 08, 2015 12:41 am
Forum: RouterBOARD hardware
Topic: SXT Lite5 Problem !!!
Replies: 11
Views: 6508

Re: SXT Lite5 Problem !!!

Outside -10 SXT 5nD r2 (lite5) failed to connect using channel width 20/40MHz OS ver 6.9 at 20Mhz channel width no problem at all, unit connects in a second I m using protocol nv2 signal -54/-56, OmniTik as AP After upgrade to 6.24 unit need 47min to establish connection with AP this is print screen...
by Lakis
Sat Jan 03, 2015 3:40 pm
Forum: Announcements
Topic: 6.24 released
Replies: 89
Views: 49010

Re: 6.24 released

Does wireless-6.24.npk = wireless-fp-6.24-.npk (except add ons like CAPS Man and AC support) or in wireless-fp-6.24.npk there are much more changes like in nv2 and etc?

If we dont need CAPS-man or we dont use AC equipment which packed u prefer to use?
by Lakis
Wed Dec 31, 2014 1:40 pm
Forum: RouterBOARD hardware
Topic: SXT Lite5 Problem !!!
Replies: 11
Views: 6508

Re: SXT Lite5 Problem !!!

Any news about that I have this problem now temperature drop below -10 - no snow yet and this only happen on SXT Lite 5
When set to 20Mhz seem fine until I use 20/40 Below/Above is there fix?
by Lakis
Wed Dec 24, 2014 1:30 am
Forum: Wireless Networking
Topic: BaseBox5/NetBox5 RF shield
Replies: 7
Views: 3345

Re: BaseBox5/NetBox5 RF shield

Can u put board from netbox5?
by Lakis
Thu Dec 11, 2014 8:14 pm
Forum: Wireless Networking
Topic: MT's answer to ubnt Multi-Lane RF technology
Replies: 13
Views: 3656

Re: MT's answer to ubnt Multi-Lane RF technology

Personally I love bandpass filters but they are so expensive and hard to find, plus u need a lot of planing if you are using them, but this multi-lan RF technology wops my hope for future wireless. In the past year or two MT offer nice line of products - yes but they did not come up with some "...
by Lakis
Tue Dec 09, 2014 2:06 pm
Forum: Wireless Networking
Topic: MT's answer to ubnt Multi-Lane RF technology
Replies: 13
Views: 3656

Re: MT's answer to ubnt Multi-Lane RF technology

Personally I love bandpass filters but they are so expensive and hard to find, plus u need a lot of planing if you are using them, but this "tunable active filtering" technology wops my hope for future wireless. In the past year or two MT offer nice line of products - yes but they did not ...
by Lakis
Mon Dec 08, 2014 10:45 pm
Forum: Wireless Networking
Topic: 10MHz versus 20Mhz (or higher) setting advantages?
Replies: 21
Views: 16922

Re: 10MHz versus 20Mhz (or higher) setting advantages?

A year ago on ubq forum it was announced that airprism will be integrated in all AC series, but still I can't find any information about that (maybe it is hidden future I don't know). As on a youtube clip (posted a year ago) it was announced only one product using airprism technology called UAP Out...
by Lakis
Mon Dec 08, 2014 10:25 pm
Forum: Wireless Networking
Topic: 10MHz versus 20Mhz (or higher) setting advantages?
Replies: 21
Views: 16922

Re: 10MHz versus 20Mhz (or higher) setting advantages?

A year ago on ubq forum it was announced that airprism will be integrated in all AC series, but still I can't find any information about that (maybe it is hidden future I don't know). As on a youtube clip (posted a year ago) it was announced only one product using airprism technology called UAP Outd...
by Lakis
Mon Dec 08, 2014 3:54 am
Forum: Wireless Networking
Topic: 10MHz versus 20Mhz (or higher) setting advantages?
Replies: 21
Views: 16922

Re: 10MHz versus 20Mhz (or higher) setting advantages?

I dont like Ubq much but have you ever heard about new technology called AirPrism "active filtering" looks promising
https://www.youtube.com/watch?v=2aWvSRKqh9Q
http://www.ubnt.com/broadband/technology/
by Lakis
Thu Dec 04, 2014 5:53 pm
Forum: Wireless Networking
Topic: Problem of packet loss with a wireless link between 2 QRT-5
Replies: 7
Views: 3258

Re: Problem of packet loss with a wireless link between 2 QR

Dude u wrote Hello, When I ping the station from the AP I have packet loss, it s pretty irregular, no loss for 30 seconds, then loss for 4/5 seconds, then no loss again, then loss for 10 seconds, etc.... Than u wrote I was losing hope when I find something. If I ping the AP from the station, I don't...
by Lakis
Thu Dec 04, 2014 2:03 pm
Forum: Wireless Networking
Topic: Problem of packet loss with a wireless link between 2 QRT-5
Replies: 7
Views: 3258

Re: Problem of packet loss with a wireless link between 2 QR

Your signal is very strong, reduce tx power
Also there is some minor bug in nv2
read this topic http://forum.mikrotik.com/viewtopic.php ... 25#p458915
in meantime just use nstreme
by Lakis
Thu Dec 04, 2014 1:32 am
Forum: Wireless Networking
Topic: Nstreme "not polled for too long" possibly fixed.
Replies: 13
Views: 7232

Re: Nstreme "not polled for too long" possibly fixed.

I really want to know how and where Mikrotik team is doing wireless tests Yep nv2 on AC is horrible - ok ok there are still some problems to be fix, on N is kind a slower than nstreme only tests done in lab are good :) Orangetek tnx for advice believe me I have tried everything but periodic calibrat...
by Lakis
Tue Nov 25, 2014 3:16 am
Forum: Wireless Networking
Topic: 10MHz versus 20Mhz (or higher) setting advantages?
Replies: 21
Views: 16922

Re: 10MHz versus 20Mhz (or higher) setting advantages?

Antenna receive all the energy and it is send to the radio , radio chose what to listen and what not to, and in your case listen or communicate on that 10MHz of "energy" - everything bellow and above near that 10MHz channel is called noise , there is no such "radio filter" part o...
by Lakis
Mon Nov 24, 2014 6:44 pm
Forum: Wireless Networking
Topic: Btest / High CPU load affects Rx CCQ
Replies: 9
Views: 3490

Re: Btest / High CPU load affects Rx CCQ

not mostly in v6, bug is in v6 but not as u describe my CCQ drops 20-30% less maybe its my equipment better cpu Why SNTP can case high cpu usage hm? (yes it is more random in v6 I never got answer) Not only v6, I have had one 711G with 5.26 where SNMP suddenly maxed out the CPU and only restart fix...
by Lakis
Sun Nov 23, 2014 11:35 pm
Forum: Wireless Networking
Topic: 10MHz versus 20Mhz (or higher) setting advantages?
Replies: 21
Views: 16922

Re: 10MHz versus 20Mhz (or higher) setting advantages?

"scan list tells to search for that 10Mhz frequency the radio" - exactly quote :D channel list tels radio "set wlan1 channel-width=10mhz" and scan no meter if ur wlan1 is set to 20MHz or 20/40MHz
by Lakis
Sun Nov 23, 2014 11:08 pm
Forum: Wireless Networking
Topic: Multipoint to Point Problem: RB Groove A-52HPn + SXT Lite 2
Replies: 2
Views: 2054

Re: Multipoint to Point Problem: RB Groove A-52HPn + SXT Lit

Unit cant be set to use nv2 and nstreme in same time - it can be selected but unit use nv2 or nstreme depend I dont know from what try selecting WProtocol=nv2 (only) on AP and WProtocol=any on clients also try not to use station wds try station bridge Queue Types does not have role in wireless perfo...
by Lakis
Sun Nov 23, 2014 10:49 pm
Forum: Wireless Networking
Topic: 6.22 routeros wireless high cpu usage
Replies: 9
Views: 4665

Re: 6.22 routeros wireless high cpu usage

High CPU usage by "no" reason cased by wireless package
This is OmniTik cpu graph
weekly.gif
this is happening from time to time I dont know whats triggering hight cpu usage
have the same problem on 3 OmniTiks U-5HnD
by Lakis
Sun Nov 23, 2014 10:32 pm
Forum: Wireless Networking
Topic: Btest / High CPU load affects Rx CCQ
Replies: 9
Views: 3490

Re: Btest / High CPU load affects Rx CCQ

not mostly in v6, bug is in v6 but not as u describe my CCQ drops 20-30% less maybe its my equipment better cpu

Why SNTP can case high cpu usage hm? (yes it is more random in v6 I never got answer)
by Lakis
Sun Nov 09, 2014 2:37 am
Forum: Wireless Networking
Topic: Problem of non-contact devices Nanostation 5 With RB912
Replies: 10
Views: 3219

Re: Problem of non-contact devices Nanostation 5 With RB912

Dear brother My problem is you may clarify them clearly I am now used to broadcast your sales system Band 5Hz-A But now I want to increase the size of the transfer of information to private customers me This increase is only done through the use of 5Hz-A/N When using this system I suffer from lack ...
by Lakis
Fri Nov 07, 2014 5:01 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 200
Views: 127632

Re: CAPsMAN v2 ready for testing

by Lakis
Sat Oct 25, 2014 4:00 pm
Forum: Wireless Networking
Topic: Throughput Speedtest RB911G-5HPnD-QRT
Replies: 12
Views: 8718

Re: Throughput Speedtest RB911G-5HPnD-QRT

I had the same problem. When nv2 is used i cant't send more then 10Mbit/s i TCP. First bandwitdh test after wlan reconnect is correct 50 Mbit/s in 10MHz channel width but second bandwidth test show max only 10Mbit/s. I have used ROS 6.20 and wireless-fp. Test is do between 2x sxt. Interface queue i...
by Lakis
Sat Sep 20, 2014 2:13 am
Forum: RouterBOARD hardware
Topic: RB750UP temeperature problem
Replies: 20
Views: 5182

Re: RB750UP temeperature problem

Dont get me wrong but something is wrong in 6.x OS (I know u have done tests in lab)-but I don't get it in 5.x temperature was somewhere around 45C max 50C after upgrade look at this picture temp.png two units (SXT,OmniTIk) power consumption at minimum its night outside temperature is around 15-16C ...
by Lakis
Thu Sep 18, 2014 10:15 pm
Forum: RouterBOARD hardware
Topic: SXT HP power up by 750UP showing 10.1W con.???
Replies: 2
Views: 1299

Re: SXT HP power up by 750UP showing 10.1W con.???

On outer ports 3-5 max 6W

Ive replace units cables from port5 to port4 (vice versa) - problem persists (probably sensor) port5 continue showing 10-15w consummation
by Lakis
Thu Sep 18, 2014 2:26 am
Forum: RouterBOARD hardware
Topic: SXT HP power up by 750UP showing 10.1W con.???
Replies: 2
Views: 1299

SXT HP power up by 750UP showing 10.1W con.???

After upgrade from 5.26 to 6.19 SXT HP powered up by 750UP on ether5 port it is showing 10.1W consumption is it possible or its just a sensor mistake? upsxthp2.png it should be something about 3.5 max 7w. I use 3m cat5e from RB750UP to HP on other ports consumption is normal 2-4W per port When I do ...
by Lakis
Sun Jun 29, 2014 2:33 pm
Forum: General
Topic: RB260GSP is it giga POE OUT?
Replies: 15
Views: 7716

Re: RB260GSP is it giga POE OUT?

Lakis: Since you don't know exactly what dadaniel showed you (you don't have that switch), let me translate: Port is enabled, link active, autonegotiation on, 1Gb, full duplex, flow control on, with POE output draining 170mA corresponding to a power of 2.35W . So yes, the RB260GSP is capable of sup...
by Lakis
Sat Jun 28, 2014 7:07 pm
Forum: General
Topic: RB260GSP is it giga POE OUT?
Replies: 15
Views: 7716

Re: RB260GSP is it giga POE OUT?

between mikrotik board, can reach 1Gb, i do not have third party gigabit PoE devices to test.
dadaniel tnx but I know its a gigabit switch
I have not pursued 260GSP yet to make a test :), there is no info on mikrotik web about PoE out gigabit support? any info is welcomed.
by Lakis
Fri Jun 27, 2014 10:30 pm
Forum: General
Topic: RB260GSP is it giga POE OUT?
Replies: 15
Views: 7716

RB260GSP is it giga POE OUT?

Does RB260GSP support Giga PoE OUT or just when u use PoE OUT its limited to 100mbit? if not when Mikrotik have plan to make one?
by Lakis
Sun Jun 08, 2014 11:45 pm
Forum: General
Topic: Migrating Simple Queues from v5 to v6 Help.
Replies: 1
Views: 1113

Re: Migrating Simple Queues from v5 to v6 Help.

Finally I have found solution. For small number of simple queues changing that is easy (if the Problem is in dst="" because I don't get replay) but if u have 500-2000 u need hours of work but u can do it in one step with little help of scripting /queue simple> :for i from=1 to=2000 do={set...
by Lakis
Sat Jun 07, 2014 5:27 pm
Forum: General
Topic: Migrating Simple Queues from v5 to v6 Help.
Replies: 1
Views: 1113

Migrating Simple Queues from v5 to v6 Help.

Hi. Need little help how to migrate simple queues from v5 to v6 OS, from old V5.26 OS server to new CCR server. Did backup and restore to new one CCR and all seemed fine except SQueues does not show any traffic, they show something but they dont work as they suppose like in V5. I know in V6 SQ there...
by Lakis
Wed Jun 04, 2014 12:20 am
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 6944

Re: QRT-2 new device?

This two SXT SA are placed about 30sm one from other (at first it was for a test but I left them that way) in opposite direction + I have 3 more units on this collocation (OmniTik, 2x sxt) frequencies are 5580 and 5700 channel 20Mhz width - both are p2mp SXTSA->2xSXTHP distance of clients are from 1...
by Lakis
Mon Jun 02, 2014 7:26 pm
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 6944

Re: QRT-2 new device?

500m, we've reduced wlan output power down to 17dBm on both sides (signal level was -32dBm with full power). That is excellent. How about noise environment? I can see noise but does this link is located in area with lot of wifi traffic? Anyway to Mikrotik - SXT SA is great for collocation place thi...
by Lakis
Tue May 20, 2014 1:15 am
Forum: Wireless Networking
Topic: 200Mbit/s Wireless Link over 80m distance?
Replies: 6
Views: 2190

Re: 200Mbit/s Wireless Link over 80m distance?

80m - use lan or fiber
by Lakis
Mon May 19, 2014 11:03 pm
Forum: RouterBOARD hardware
Topic: Different OmniTik-UP give different temperature?
Replies: 1
Views: 964

Different OmniTik-UP give different temperature?

Yes, I'm using them quite a lot, but something I don't get it why there is such a big differences in operating temperature. there isn't anything new in OmniTik hardwere for over a year except the new ones which come with 128MB HDD size This 24h graphs are generated via SNMP This graph is from older ...
by Lakis
Sat May 10, 2014 12:26 pm
Forum: Wireless Networking
Topic: Tutorial: How to convert 220V UPS to 24V UPS for Mikrotik
Replies: 4
Views: 2207

Re: Tutorial: How to convert 220V UPS to 24V UPS for Mikrot

And at last there u have it 10.jpg working 24V UPS :) at last place careful UPS cover 11.jpg now lets do calculation we have 24V 7.2A system, we can use only 50% of battery that is about 3.1A we have 24x3.1=74.4W If we have 3 Units Omnitik(max pow. cons=7W) and 2xSXT(max pow. cons=7W) 3units x 7W=21...
by Lakis
Sat May 10, 2014 12:25 pm
Forum: Wireless Networking
Topic: Tutorial: How to convert 220V UPS to 24V UPS for Mikrotik
Replies: 4
Views: 2207

Re: Tutorial: How to convert 220V UPS to 24V UPS for Mikrot

Place AD-55B as on picture connect all the cables
7.jpg
Put PoE splitter outside as u wish
now if the old batteries are death, u have to bay new one I suggest u to use 12V 7.2A they are about 8 Euros.
Connect the batteries
8.jpg
Place them inside
9.jpg
by Lakis
Sat May 10, 2014 12:18 pm
Forum: Wireless Networking
Topic: Tutorial: How to convert 220V UPS to 24V UPS for Mikrotik
Replies: 4
Views: 2207

Re: Tutorial: How to convert 220V UPS to 24V UPS for Mikrot

Now check if the batteries are ok , but probably they are death
4.jpg
next
5.jpg
next
6.jpg
by Lakis
Sat May 10, 2014 12:16 pm
Forum: Wireless Networking
Topic: Tutorial: How to convert 220V UPS to 24V UPS for Mikrotik
Replies: 4
Views: 2207

Tutorial: How to convert 220V UPS to 24V UPS for Mikrotik

Regular 220V UPS is not efficient especially if u using Mikrotik or UBQ equipment - 2 battery UPS convert 24V in to 220V than we use adepter converting 220V in to 24V we have massive losses Someone may have already done it but let me show how to What u need is 1.jpg Old non working 2 battery UPS, me...
by Lakis
Sun Apr 27, 2014 8:41 pm
Forum: Wireless Networking
Topic: Problem with Bridging Existing Wireless Conection
Replies: 13
Views: 15403

Re: Problem with Bridging Existing Wireless Conection

mth.png
simple copy SSID name of designated wifi to wlan SSID TAB "space"
by Lakis
Sat Apr 26, 2014 1:19 pm
Forum: Wireless Networking
Topic: Problem with Bridging Existing Wireless Conection
Replies: 13
Views: 15403

Re: Problem with Bridging Existing Wireless Conection

Hi dudes ! I want to connect to existing Wireless connection, and for that follow this manual: http://wiki.mikrotik.com/wiki/Connect_to_an_Available_Wireless_Network I run all steps, but when click "Scan" and double clicked on SSID that i want to connect, give me error: "ERROR: scan ...
by Lakis
Mon Apr 07, 2014 12:22 am
Forum: Wireless Networking
Topic: How do I check if my Mikrotik is infected
Replies: 6
Views: 3197

Re: How do I check if my Mikrotik is infected

well I cant deny what u say but if router was reboot by command /system reboot there will be in log "system info: router rebooted" sometimes I get error like what u describe system error critical: router was rebooted without proper shut down this can be case by kernel panic, high cpu usage...
by Lakis
Sun Apr 06, 2014 5:54 pm
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 75497

Re: CAPs Manager

I don't know about u all sorry for been skeptic, Ive been hire for some time and really enjoy MT innovation and work But this CAPsMAN future (I love the idea) but I don't really get it - centralization of wireless network management in big enterprise network will not make things more simple Somehow ...
by Lakis
Sun Apr 06, 2014 2:48 pm
Forum: Wireless Networking
Topic: How do I check if my Mikrotik is infected
Replies: 6
Views: 3197

Re: How do I check if my Mikrotik is infected

dont be hysterical :)
if you reboot unit, the log will be empty - unless it is set to be stored
without password and user there is no way u can log in to MT OS
by Lakis
Sun Apr 06, 2014 1:12 pm
Forum: Wireless Networking
Topic: Omnitik issue
Replies: 4
Views: 1733

Re: Omnitik issue

There may be difference up to 1-3db from lower to higher channel. nstreme is not good for p2mp scenario with more clients per AP especially if u use OmniTik (nstreme disconnect problem is old story by the way)
When u do test with nv2 do it with more connections.
by Lakis
Fri Apr 04, 2014 1:10 pm
Forum: General
Topic: What is the reason that SNMP case high CPU - OmniTik UPA?
Replies: 1
Views: 1116

What is the reason that SNMP case high CPU - OmniTik UPA?

I have several OmniTik UPA running but on one SNMP case high CPU load 70-100% config is almost same on every unit - all ports are in bridge no firewall no extra settings are in place. Can it be hardware problem? I already did system no default reset and configure unit again but no luck. I m using 6....
by Lakis
Sat Mar 29, 2014 1:43 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik

Don't be so negative about wifi, its not so bad, after all u are still in business - u know in every industry upgrading is never ending process what can sumsung or apple say they have to spend millions and millions dollars for new technology and new products that cant even make to the market by the ...
by Lakis
Wed Mar 26, 2014 11:17 am
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik

Ubnt GPS sync is only good for auto act timing :) - when first come out idea was good and theoretically it should work but it doesn't - maybe it is UBnt fault they cant sort it out on loaded towers best ting to do is to invest in RF shields WirelessRudy: U dont have idea what US have done to us - ho...
by Lakis
Wed Mar 26, 2014 12:58 am
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 75497

Re: CAPs Manager

So from what I've tested sorry for my ignorance I know its still beta but 1. If lets say Omnitik is set as Cap and for some reason lose connection with cap-manager all wlan seatings are going back to default - clients connected to this omnitik normally will lose connection in case of 50 Ap station c...
by Lakis
Tue Mar 25, 2014 8:05 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik

I've found that MT clients may drop more often than UBNT clients, but often the customer may be on the Internet and never even notice it. On the UBNT forum the general consensus is anything worse than -73dB is a lost cause, and using the Nanobridge M2 they may be correct. Using an SXT or a custom b...
by Lakis
Mon Mar 24, 2014 2:12 pm
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 75497

Re: CAPs Manager

finally done it, Certificate problem.
except u need to upgrade wiki info there are ton of new options
by Lakis
Mon Mar 24, 2014 12:30 pm
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 75497

Re: CAPs Manager

I cant get it work Cap cant find CapsMan
anyone who could help step by step
by Lakis
Mon Mar 24, 2014 1:59 am
Forum: General
Topic: v6.11 released
Replies: 260
Views: 112358

Re: v6.11 released

Careful while upgrading there are ton of bugs - possible u have to do master reset It is not so bad - I've upgrade all of my 16 various routers and everything works so far. What Ive want to ask is, there are new futures on ether Auto Negotiation TAB Tx/Rx Row Control and Advertise since I cant find...
by Lakis
Tue Mar 11, 2014 6:24 pm
Forum: General
Topic: open a range of ports... Like all of them.
Replies: 5
Views: 8397

Re: open a range of ports... Like all of them.

in ip firewall nat> add this two rules 0 chain=dstnat action=dst-nat to-addresses=192.168.88.100(unit or pc ip that u want to forward all ports) protocol=tcp in-interface=WAN 1 chain=srcnat action=masquerade this should open-redirect all ports After adding these rules it’s probable that u cannot ope...
by Lakis
Mon Mar 10, 2014 1:39 pm
Forum: Wireless Networking
Topic: Need help, could not find wireless option.
Replies: 3
Views: 1427

Re: Need help, could not find wireless option.

Its RB2011UiAS-2HnD-IN model

first do system reset - than if wifi don't show
go in to system->package check if wireless.npk is missing or disabled
by Lakis
Sat Mar 08, 2014 7:48 pm
Forum: General
Topic: Belgium WISP / EIRP limitations
Replies: 15
Views: 4512

Re: Belgium WISP / EIRP limitations

First of all u need to be in front of antenna u can not be 100m from antenna and make measure , second this device is measuring all the signals in the area so how the heck they will know if this signal is coming from ur antenna?
by Lakis
Sat Mar 08, 2014 7:10 pm
Forum: General
Topic: Belgium WISP / EIRP limitations
Replies: 15
Views: 4512

Re: Belgium WISP / EIRP limitations

Yes limit is 1W 5470-5730Mhz
but can someone answer me :) lets say I have p2p link with new QRT-5 how they can find if my radio is operating on 1.5W or 2W power output
how can it be measured

5150-5360 I heard that it is for indoor - official everyone is using this freq for outdoor
by Lakis
Fri Mar 07, 2014 12:19 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik

Hi Lakis, How is the performance on the 24Ghz band in the location where you have installed the link? I am looking at installing such a link and would like to know of any issues you may have encountered such as rain fade etc. Location Installation is in Malta (Lat/Long are 35°53'8.18"N/14°27'1...
by Lakis
Fri Mar 07, 2014 11:51 am
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik

There is always going to users who prefer Mikrotik or UBNT,
I will say Mikrotik offers something that UBNT cannot and that is you can customize antenna build,
I also prefer Mikrotik
But in some cases UBNT has something that Mikrotik cant offer :)
Can you say me examples?
pls read all posts.
by Lakis
Thu Mar 06, 2014 2:27 am
Forum: Wireless Networking
Topic: SEXTANT G 5HPnD and 13km distance
Replies: 13
Views: 8018

Re: SEXTANT G 5HPnD and 13km distance

Yes its possible but not advisable
by Lakis
Thu Mar 06, 2014 2:12 am
Forum: General
Topic: Wrong Public IP Showing
Replies: 21
Views: 4812

Re: Wrong Public IP Showing

/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1

this should be removed

add
chain=dstnat action=dst-nat to-addresses=x.x.x.x
dst-address=x.x.x.x


also
/interface bridge port

add interface=ether1
add interface=ether2

last two add interface=ether1 where or = none
by Lakis
Thu Mar 06, 2014 1:53 am
Forum: Wireless Networking
Topic: SXT HG
Replies: 17
Views: 5199

Re: SXT HG

Rudy "The link is so bad I cannot even run a wireless scan on the other end" - how are u doing that? If u do scan on the other side simple - link will disconnect!?
by Lakis
Thu Mar 06, 2014 1:41 am
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 75497

Re: CAPs Manager

Just installed it to check and it's not there.
try in terminal /caps-manager
by Lakis
Tue Mar 04, 2014 8:19 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik

yes 24Ghz 10km link
now there is 5Ghz version
24GHz - at 10KMs :? I hope it does rain very often :lol:
:D
yep heavy rain = problem
by Lakis
Tue Mar 04, 2014 6:49 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik

yes 24Ghz 10km link
now there is 5Ghz version
by Lakis
Mon Mar 03, 2014 10:52 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik


I also prefer Mikrotik
But in some cases UBNT has something that Mikrotik cant offer :)
I would like to know what UBNT offers that Mikrotik cannot?
airfiber :) its so freaking cool
by Lakis
Mon Mar 03, 2014 5:56 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77244

Re: Ubiquiti vs Mikrotik

There is always going to users who prefer Mikrotik or UBNT,
I will say Mikrotik offers something that UBNT cannot and that is you can customize antenna build,
I also prefer Mikrotik
But in some cases UBNT has something that Mikrotik cant offer :)
by Lakis
Sat Mar 01, 2014 12:08 pm
Forum: Wireless Networking
Topic: Question About.. SEXTANT G 5HPnD
Replies: 15
Views: 4908

Re: Question About.. SEXTANT G 5HPnD

Hello, Also i had issue, where the signal and CCQ where ok but the tx/rx levels where not - "final" alligment of sextants solves the problem. And again doublecheck that both! ends are configured correctly HT chains and Channel width 20/40 (not 20)! Aleksander I try to change it all freque...
by Lakis
Sat Mar 01, 2014 11:48 am
Forum: Wireless Networking
Topic: RB433 and 2*XR5 PTP Link
Replies: 21
Views: 4981

Re: RB433 and 2*XR5 PTP Link

Can you sketch out a simple diagram of what you trying to achieve? i have 2 RB433AH and 4 minipci XR5 and i want use nstream Dual . Nstream dual is old :) u can always use N basically its better u use 1 frequency instead of two per link but as u said if u already have XR5 and 433 - take a look at t...
by Lakis
Thu Feb 20, 2014 11:50 am
Forum: General
Topic: Mikrotik GPS Sync just like Airfiber
Replies: 124
Views: 43403

Re: AW: Mikrotik GPS Sync just like Airfiber

maybe it is stupid question... why do we need a gps sync? What about some kind of sync over ethernet on the same place? What about sync over time (NTP) Is it really so hard to make it work? Lets say that it will be necesary just to set up place A, or place B on RB and common ntp server.... NTP ist ...
by Lakis
Wed Feb 19, 2014 10:00 pm
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 6944

Re: QRT-2 new device?

One more why only on SXT SA unit inside of the case is covered with special shielding? New antenna, so we have opportunity to make improved case. We might have this in new SXT models in future as well. Yes pls do it Today I've made some tests and yes it has real benefit from it - P2P link changed H...
by Lakis
Tue Feb 18, 2014 10:29 pm
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 6944

Re: QRT-2 new device?

One more why only on SXT SA unit inside of the case is covered with special shielding?
by Lakis
Mon Feb 17, 2014 11:50 pm
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 6944

QRT-2 new device?

TX power 35db Lol where can I use that?
by Lakis
Sun Feb 16, 2014 8:16 pm
Forum: Wireless Networking
Topic: 802.11ac
Replies: 51
Views: 34012

Re: 802.11ac

AC-antenna???

promoting brand names is allowed. pls give us more info.
by Lakis
Fri Feb 07, 2014 7:24 pm
Forum: Wireless Networking
Topic: Wireless P2P in Wind Turbines
Replies: 2
Views: 1517

Re: Wireless P2P in Wind Turbines

Turbine yes but blades are made from fiber plastic!? so it shouldn't be a problem I guess.
by Lakis
Thu Feb 06, 2014 11:38 am
Forum: Wireless Networking
Topic: full duplex link....
Replies: 27
Views: 6722

Re: full duplex link....

Read this
http://wiki.mikrotik.com/wiki/Manual:Wi ... d_Channels
You need extra-channels license - this is not the same with super channel
write to mikrotik support they should enable this future on your account
by Lakis
Thu Feb 06, 2014 12:30 am
Forum: Wireless Networking
Topic: full duplex link....
Replies: 27
Views: 6722

Re: full duplex link....

UDP test using 1x1 wlan 60 Mhz channel width; protocol nv2
1wlannv260.png
And the Last UDP test 60 Mhz channel width; protocol nstreme
1wlannstreem60.png
REMEMBER THIS ARE AMATEUR TESTS :)
by Lakis
Thu Feb 06, 2014 12:27 am
Forum: Wireless Networking
Topic: full duplex link....
Replies: 27
Views: 6722

Re: full duplex link....

Whats up guys sorry I was too busy last days I did not have much time to make outside test with good antenna, good distance, good conditions but hire u are "room" tests On this photo u can see how is performer test, I know its pathetic but what can I do :) We have RB800 and RB435G 4x R52Hn...
by Lakis
Sun Feb 02, 2014 11:09 pm
Forum: Wireless Networking
Topic: full duplex link....
Replies: 27
Views: 6722

Re: full duplex link....

I try to lower the output power but no luck wireless cards were not just overloading, u just cant imagine how much they were overheating :) to saintofinternet in good condition u can get something around 200mbit TCP and 300mbit UDP using 40Mhz channel width real question what I want to try is how mu...
by Lakis
Sun Feb 02, 2014 7:57 pm
Forum: Wireless Networking
Topic: full duplex link....
Replies: 27
Views: 6722

Re: full duplex link....

This is my first 40Mhz N test but I m not very happy with that too much self interference test1.jpg Ill remake test with RB800 in better conditions tomorrow + Ill do 2x 60Mhz Test -advanced channels And one more thing I can not make nv2 to work dont know why (2xwlan on one board) - if u use 4xSXT it...
by Lakis
Sun Feb 02, 2014 12:19 pm
Forum: Wireless Networking
Topic: full duplex link....
Replies: 27
Views: 6722

Re: full duplex link....

2 wlan on one board will give u more self interference (I have this kind of problems on A-standard) 4x SXT theoretically will give u much more throughput ill try this today
by Lakis
Sat Feb 01, 2014 10:55 pm
Forum: Wireless Networking
Topic: Routing Wireless Network to external swtich
Replies: 3
Views: 1540

Re: Routing Wireless Network to external swtich

I really can not understand u well u have external proxy, MT board + switch scheme will be helpful
when u create bridge and u put as ports wlan1 and lets say ether3 they act basically as one
by Lakis
Sat Feb 01, 2014 8:58 pm
Forum: Wireless Networking
Topic: full duplex link....
Replies: 27
Views: 6722

Re: full duplex link....

hi, what is a better solution for using a full duplex link?? One RB with 2 WLAN card on each side or 4 units of RB-SXT?? and is it possible for RB-SXT to be used for a full duplex link as i have not been able to find any config for that though.... well full duplex is something like 100/100mbit tx/r...
by Lakis
Fri Jan 31, 2014 9:06 pm
Forum: General
Topic: 6.9 released!
Replies: 222
Views: 103733

Re: 6.9 released!

sxt not accesible after upgrade
Hm thats interesting you know cos after upgrade (from 6.5) on two RB433AH address list was empty - can u check if this is a case
by Lakis
Fri Jan 31, 2014 7:29 pm
Forum: General
Topic: RouterOS on common hardware
Replies: 3
Views: 1177

Re: RouterOS on common hardware

RouterOS on UBQ units :)
by Lakis
Thu Jan 30, 2014 12:30 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 145
Views: 73508

Re: MUM Europe 2014 - Italy, Venice, February 20-21

In Zagreb Phone lottery was a set up
cool dude from DeltaLink win it - he pulled his own ticked :)
by Lakis
Thu Jan 30, 2014 12:17 am
Forum: Wireless Networking
Topic: wired AND nv2 802.11n multi hop throughput issue
Replies: 29
Views: 9814

Re: wired AND nv2 802.11n multi hop throughput issue

I have same problem on my network. But now I think it's related to RB2011. If I do BT to RB2011, over two wireless NV2 links, I get full throughput. But I get more then 50% lower values if I BT to router which is connected to RB2011 over Ethernet. Both UDP and TCP. There is a major problem somewher...
by Lakis
Wed Jan 29, 2014 11:55 pm
Forum: General
Topic: Problem with disk space
Replies: 6
Views: 1967

Re: Problem with disk space

No meter u have 1000xCF u can never use them as system "HD" memory It is looking strange u should have at lest 16-20MB free Well I suggest u to do netinstall but remove (no just disable - remove) all unused packages like wireless.npk dude.npk ups.npk keep only what u need Also u can do tha...
by Lakis
Wed Jan 29, 2014 8:14 pm
Forum: General
Topic: Did our mikrotik O.S detect USB LAN card???
Replies: 20
Views: 6793

Re: Did our mikrotik O.S detect USB LAN card???

Usb with realtek chip yes I m using them since OS 3.x on x86 similar to this http://www.dhgate.com/store/product/viewcon-ve091-usb-to-10-100-mbps-fast-ethernet/96591558.html Have you tested any thing with USB 2 (for more than 100Mbps) ? Not yet but if hardware is supported it should work " pro...
by Lakis
Wed Jan 29, 2014 7:08 pm
Forum: General
Topic: Did our mikrotik O.S detect USB LAN card???
Replies: 20
Views: 6793

Re: Did our mikrotik O.S detect USB LAN card???

Usb with realtek chip yes I m using them since OS 3.x on x86

similar to this
http://www.dhgate.com/store/product/vie ... 91558.html
by Lakis
Wed Jan 29, 2014 7:02 pm
Forum: General
Topic: v6.8 pre-release (RC)
Replies: 44
Views: 9147

Re: 6.8

where the heck is 6.8? :)
by Lakis
Wed Jan 29, 2014 7:00 pm
Forum: General
Topic: v6.7 released
Replies: 225
Views: 133175

Re: v6.7 released

Alfabi u have random traffic "spaiks"
by Lakis
Mon Jan 27, 2014 11:54 pm
Forum: Wireless Networking
Topic: Problem with DHCP Server behind Mikrotik
Replies: 9
Views: 2874

Re: Problem with DHCP Server behind Mikrotik

Thanks for the answer but you are misunderstanding me. The DHCP Server for our LAN is NOT configured on our mikrotik. My Problem is that Clients connected to the LAN-Port of the Bridge(the DHCP-Server is connected there too) get a DHCP-Offer, but on the WAN-Port of the same bridge, they dont. WAN-p...
by Lakis
Mon Jan 27, 2014 10:00 pm
Forum: Wireless Networking
Topic: wired AND nv2 802.11n multi hop throughput issue
Replies: 29
Views: 9814

Re: R: wired AND nv2 802.11n multi hop throughput issue

Between the 711 and 2011 is wired, so the test is 98Mbps tcp. Can you use nstreme with dual chain and N? I never tried, but i read that is unstable believe it or not I can never reach 98Mbit TCP test with BTest - from board to board Yes u can use nstreme on N, its a little slower but nstreme has it...
by Lakis
Mon Jan 27, 2014 8:57 pm
Forum: Wireless Networking
Topic: wired AND nv2 802.11n multi hop throughput issue
Replies: 29
Views: 9814

Re: wired AND nv2 802.11n multi hop throughput issue

always nstreme
but problem is, as u describe from Omnitik to RB711G basically u have only one wireless link

This is ur quote "RB 711G-5Hnd to the RB2011 it performs 98Mbps?"
it cant be TCP test, can u do TCP Test