MikroTik

drnitinarora

Is there a way we can restrict the Active user sessions in Hotspot?

Eg.
- If we have 100 connected hosts to mikrotik
- If we set active users to 10 , then only 10 active users are allowed to login out of 100 connected hosts at any given time.

Thanks in anticipation

drnitinarora

Thank you for your reply Sinan!

We have added a script already which monitors number of active sessions.

Our concern is how will the user know why he/she is not allowed to login.

Looking out for a way to show some message or redirect user to a url where we can display prefabricated messages.

drnitinarora

Is there a way we can restrict the Active user sessions in Hotspot?

Eg.
- If we have 100 connected hosts to mikrotik
- If we set active users to 10 , then only 10 active users are allowed to login out of 100 connected hosts at any given time.

Thanks in anticipation

drnitinarora

Is there a way we can restrict the Active user sessions in Hotspot?

Eg.
- If we have 100 connected hosts to mikrotik
- If we set active users to 10 , then only 10 active users are allowed to login out of 100 connected hosts at any given time.

Thanks in anticipation

drnitinarora

Well I tried a way out on a 450G model.

A flashfig got me the configurations removed and the files were safe.

It did worked. So if somebody can just help me to know if it will work with X86 (PC) or not?

Thanks

drnitinarora

If there is a solution, we are ready to Pay for it!

drnitinarora

No I am not aware hot to reset on X.86

also I am using L-6 license and there are lot of Backup and configuration files on disk which I cant afford to lose.

Is there a way I can use Serial port to change any configurations before Booting?

Please suggest

drnitinarora

Anticipating a reply from the forum members. Thanks in advance.

Is there a way i can stop the system to shutdown and remove the script from "netwatch"

drnitinarora

Dear All, We this is a mistake on my part and i am not able to get rid of it. While enabling netwatch feature, by mistake i added scipt: " :system shutdown " in the "on Down" instance and have specified the IP in the main screen. The port was not up and the system went down. Now ...

drnitinarora

We just want to authenticate registered users to connect to wireless network.

Just a replacement of setting up access list on each AP,

No accounting, no billing, just wireless authentication!

Can User Manager handle 5000 concurrent sessions.

drnitinarora

Dear Team, -We are planning to setup a campus wide wifi network completely based on MTKs indoors and outdoors. -All these would be running with RADIUS(User Manager) for wireless authentication and mobility support. -UM will be installed on a Xeon Quad core server With 1 TB HDD. A small pilot project...

drnitinarora

This could probably be because you do not have full permissions as administrator.

drnitinarora

I currently have the following setup as under: DVr.jpg We have given various bandwidth pools for all users using hotspot. Management gets 1 Mbps Upload/1 Mbps Dwnld Office Staff = 256K/256K Students=96K/96K and so on Now we are placing CCTV cameras which would be connected to 16 channel DVRs total 4...

drnitinarora

Dear All I am facing a strange issue with one of my RB433. It foes down randomly, dont know the reason why, cheked and changed everything.....the wires, connectors, poe injector, power supply, still cant figure out the problem....even tried to upgrade system packages.. but the problem remains same. ...

drnitinarora

Tried disabling netbios also. 85% users disabled. still the same.

drnitinarora

Dear Mrz, I am new in this setup and not familiar with MT...cn u plz tell me or redirect where i cn read about the firewall rule formulation....

drnitinarora

Thanks cipher, I corrected all the addresses.....in the network, but still the same problem, all rules added 1 by 1

drnitinarora

Is 192.122.122.3 your home network ? http://tools.ietf.org/html/rfc1918 RFC 1918 Address Allocation for Private Internets February 1996 3. Private Address Space The Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of the IP address space for private internets: 10.0...

drnitinarora

CONTD>>>>>>>>>>>>>>>>

Now see in this pic LAN IPs of server 2 starts pouring in on Mtik Backbone link....it will go to thousands...

Please help

drnitinarora

Hello All!! I am also stuck with this firewall with the same issue. My firewall config are: add chain=input connection-state=invalid action=drop comment="Drop Invalid connections" add chain=input connection-state=established action=accept comment="Allow Established connections" a...

drnitinarora

Hello All!! I am also stuck with this firewall with the same issue. My firewall config are: add chain=input connection-state=invalid action=drop comment="Drop Invalid connections" add chain=input connection-state=established action=accept comment="Allow Established connections" a...

drnitinarora

Dear all, How do i stop unauthorized people to try making an attempt to connect to wlan. I have already set unchecked default forward and default authenticate. These days I am getting a lot of people who are trying to connect. (as seen in the attached screenshot). How do I stop such attempts. My con...

drnitinarora

Hey pilgrim, I had seen your post also regarding the problem with browsing. Its a valuable piece. I am still learning about firewall and NAT. Dont have any idea about Mangle. I am only using MTs for my various offices and campuses. so all these issues are still to be dealt with. Kindly suggest some ...

drnitinarora

Dear Pilgim!! Thank you for all your support. But y do you think so. At some times one should never hesitate to seek help when stuck. I have not been working with ADSL and this was my first case. I do not belong to networking field. I am a dentist. So whatever I try, you will always have an edge ove...

drnitinarora

In mikrotik terms then your TP link2 should be in "station mode" but the terminology is different in the standard consumer products. Please let me know which TP link model you are using. Dear Pilgrim! In Mt terms TPlink 1 is in "STATION MODE", TP 2 in "AP mode" TP 3 ag...

drnitinarora

Once again Thanks pilgrim for your replies on both the posts. Well I have been working with MT now for about almost a year . I have also faced a lot of problems in the initial phases but then this kind of scenario is new and I am not able to rectify the cause. I have read in many posts People attain...

drnitinarora

Its also running in wds mode.

Will doing a Ap-Client Configuration, or EoIP configuration really help?

Thanks!!

drnitinarora

Dear Pilgrim, Thanks for the valuable piece of information. Now A Scenario: Nokia Modem------>MT 411(AP-Bridge) WPA Enabled---->TP-link(1)(In client Mode-Address=from DHCP )--->TP-link(2) on ethernet, WPA enabled(Set as AP for Increasing wireless range indoors, Has static Ip and works fine)------->N...

drnitinarora

Hello Pilgrim!! Thanks for your reply!! I have mt 411 and yup the ethr1 connected to modem well. I can use it properly on laptops but the problem begins when i need to connect to client device(in this case tplink) I want to give free internet to our students but at the same time also want to have a ...

drnitinarora

Dear All, Facing a strange problem on a 6 Km link. Site 1: MT= 411AH, Mini PCI= Compex WLM54AGP6A(26 dBm card), Antenna type: 5.8 GHz Solid Dish Co-ordinates: N= 30deg 19'21.40" E= 78deg 02'13.31" Elevation=661 m Antenna Height=24m Bridge Protocol=stp dish. Site 1.JPG Site 2: MT= 411, Mini...

drnitinarora

Dear All, I am still trying to find out where the problem lies. TO add up : TP Link is getting connected(in client mode) to WLAN and is showing good signal strength, but internet is not working. Now if i set the address of TPLINK as "dynamic (obtain from DHCP)" everything goes ok. I am abl...

drnitinarora

Dear All!! Hello! I am very new to networking and wanted to set up a small hotspot in my campus. I have a DSL connection(Nokia DSL Modem with single LAN port)(DHCP enabled 192.168.1.1) --------Mikrotik411(eth1=192.126.126.24/24, wlan1=11.126.126.24/24, mode=ap bridge) eth and wlan ports are bridged....

Search found 32 matches

Re: Useful scripts

Re: Restricting Active User count in hotspot

How to Restrict active user count in hotspot?

Restricting Active User count in hotspot

Re: Netwatch has made system shutdown

Re: Netwatch has made system shutdown

Re: Netwatch has made system shutdown

Re: Netwatch has made system shutdown

Netwatch has made system shutdown

Re: USER MANAGER FOR 5000 Users - Need Help

USER MANAGER FOR 5000 Users - Need Help

Re: user manager 5.24‏ session problems

Help regarding DVRs behind RB450 G

RB433 hangs randomly

Re: FLOODING IS KILLING PLEASE HELP...

Re: FLOODING IS KILLING PLEASE HELP...

Re: FLOODING IS KILLING PLEASE HELP...

Re: FLOODING IS KILLING PLEASE HELP...

Re: FLOODING IS KILLING PLEASE HELP...

FLOODING IS KILLING PLEASE HELP...

Re: Firewall Rules/Connections

How to Block unauthorized users on wlan

Re: Problem with DSL

Re: Problem with DSL

Re: Problem with DSL

Re: 6 Km link with very low throughput

Re: 6 Km link with very low throughput

Re: Problem with DSL

Re: Problem with DSL

6 Km link with very low throughput

One more issue

Problem with DSL