Well I guess the problem is still apear. I didn't solve my problem. It's like This. ISP#1 -----> Mikrotik ----> ISP#1 My mikrotik is in the middle, and connected to the same ISP twice, so at first interface, i can ping my ISP peer ip and have established BGP session, but on the other way, i have a p...

Faisali you were right. it was a cable problem, when i change it it just worked fine.

regards

Thanks Faisali for your post. I have a strange situaation as i said. let me present what i'm trying to do. i have a cisco 6500 switch with bgp connectivity. another cisco 3550 L3 switch, and then mikrotik with BGP also. ISP1--->6500---->3550----->mikrotik<------ISP1 again. i have a bgp on my 6500 es...

My mikrotik is connected directly to all ISP's.
My first ISP works fine.
The new (ISP 2) is my problem, i can't ping ISP's peer ip, neither the ISP ping's my peer ip.
the default route is 0.0.0./0 to my first ISP's peer.

Hello, I have a situation with mikrotik which i can't slove so i need a help. I have a mikrotik with 3 ISP's. i made BGP and get connected to first ISP nd it works fine, now when i get the new ISP's i can't even ping the peer IP from mikrotik, i think because it goe's through the default gateway 0.0...

i have a lost packet's when pinging myself the router is really dumb

When you made a queue on the RB, try to ping the router from the terminal (to ping your self) the ping goes over 30ms
what a stupid system..

doe's version 5.6 works with rb1100ahx2? for sure?

i have the same problem with rb1100ahx2, so when i removed the queue the router started to work better, but have a lot of lost packages.

Hello, i'm using RB1100AHx2 router OS 5.22 with 400Mbps of internet and BGP with default route only. CPU is about 45% and have more than 1 gig of memory free. no queues, no firewall rules (except spam protection) using ports 11 & 12 for WAN & LAN. the problem is that my RB seems to work fine...

Did you ever create the graph for ip usage?

Thanks,
still can't fix the problem with CPU, the load goes 100% after 30 minutes.
P.S The proxy is firewalled.

Thanks,
i limited the mem cache, and its ok now, but still have a problem with CPU, is that possbile to decrease?

Hello,
i'm using rb1000, and when i activated proxy and make a nat redirect to my proxy server i got memory usage 100% and cpu between 80-100% . what i can do to get the memory and cpu free?

Hello all, i'm trying to make next: i have a rb1000 router with 4 interfaces, ether1 is on ip: 62.101.1.1/24 - ether2 is on ip: 87.250.1.1/30 - ether3 in on 109.105.1.1/30 which is connected with ether1 to cisco switch 2650. also i have a cisco router connected to the switch. ether2 & ether3 are...

i found PCC, as i read about it i can make NAT for 2 ISP's. dont know how to make it to work for my situation for example.

Yes, i thought that could be the problem, but i needed a pro's opinion
Can you tell me what do you meen by PCC? i will try that.
thanks

by dhcp server. some ip's never been used on mikrotik, but i think they had been used on the dhcp server.

http://62.101.155.14/test/add-list.jpg http://62.101.155.14/test/nat.jpg these are images from MT, the first one shows the address list i create, as shown in code. i realy create a big list (180 lines). the second one shows the NAT. as you see some lines have 0 bytes and packets. donw know why? the...

- just want it that way, want to avoid bannes on chat and problem with ip's on rapidshare etc... - the problem is that the 300 users take all NAT ip's, and i must allways add a new ip's on NAT (i have now 1500) and it's almost full, i dont know why dont every user take a one NAT IP. if that happened...

i forgot to mention i have 4 routers, one of them is version 4. and have the same situation.
thanks

Hi All, i'm using mikrotik RB1000 V 3.23 and have a problem with NAT: i made an address list 192.168.200.0/28, 192.168.200.16/28 etc... and made a NAT with action src-net to addrress 10.0.0.1 10.0.0.2 etc... every 16 ip's NAT to one IP. chain=srcnat action=src-nat to-addresses=10.0.0.1 src-address-l...

rootpoint: did you get that work? its seems look like what i need...

I have a RB1000. and want to make a something and don't know if is it posible. i have 2 internet service providers, where i got 32 IP's from each, so i want to route these addresses and the connection to one network with 50 PC's, so if one of these providers had problems with ping or no connection, ...