I have problems with some devices to connect to an AP B/G/N (RB951-2n) I think that the problems are in the WIFI BOARD, because if I connect the same devices to a VIRTUAL AP (in the same RB951), I have no problems.... ROS 5.26 WPA / TKIP WPA2 / TKIP The IOS devices dont receive DHCP Address, and oth...
I have two RBs with 3 WANs each. For example RB1 and RB2 : RB1 Wan´s : 1A(eth1) / 1B(eth2) / 1C(eth3) RB2 Wan´s : 2A(eth1) / 2B(eth2) / 2C(eth3) In both RBs the same configuration of IP/ROUTES (1A and 2A are the default gateways), B and C are for ROUTING-MARK traffic (Working Well), and at the same ...
Thank you very much.... It´s working, but : I want to access to the GPS using SPECIAL-LOGIN option, to access directly to NMEA-184 protocol. When I make a SPECIAL-LOGIN access, I cannot select the CHANNEL of PORT, I access the 3G/GPRS MODEM :shock: Other problem that I have is that I need to DISABLE...
C:\User\Sebastian> nslookup microsoft.com DNS request timed out. timeout was 2 seconds. *** No se puede encontrar el nombre de servidor para la dirección 192.168.180.1: Timed out *** Los servidores predeterminados no están disponibles Servidor: UnKnown Address: 192.168.180.1 DNS request timed out. t...
Dear Chupaka, All it´s ok.. but the Mikrotik don´t run as DNS RELAY.... So I´d create a NAT RULE to resolve that : Chain : DST-NAT Protocol : UDP DST-PORT : 53 Action : DST-NAT DST-ADDRESS : (DNS SERVER - PUBLIC IP) With this rule the Mikrotik RUN as a DNS RELAY, but NOT with the NATURALL OPTION (A...
I ´m using the same hard and configuration for about one year. (RB493 With L4) A pair of days after I ´d change to ROS V3.30 the terminals cannot resolve DNS names.... I´m using MKT as DNS RELAY (Allow Remote Request) When I put in the terminals , THE SAME DNS SERVERS that I have in the MKT , every ...
Got two in today... Works GREAT !! Connected A Sprint card, USB drive and GPS module , and all are happy.. (Used a powered USB HUB to offload some of the draw fron the USB port) it is rated at up to 2A but why tax it... when a powered hub is only 15$ us.. Will be putting it thru some more testing !...
I don´t know if it´s the same problem, but I will explain my solution.... I have 3 WANs, for example 10.10.10.10 ISP1 Ether1 20.20.20.20 ISP2 Ether2 30.30.30.30 ISP3 Ether3 In routes, Gateways : GATEWAY Interface Routing Mark 10.10.10.1 Ether1 20.20.20.1 Ether2 ISP2-Mark 30.30.30.1 Ether3 ISP3-Mark ...
We have a lot of VERY GOOD links with PAC WIRELESS Dual Pol : 29 dbi and 32 dbi You can use these antennas in 5.1 to 5.8 ghz, so you can make TX in 5.2 and RX with 5.7 for example... We are using them with : Mikrotik Ubiquiti Motorola OFDM REDLINE Etc... http://www.pacwireless.com/products/HDDA5W.sh...
Isolation in MKT is : Default Forward. But !!! (VERY IMPORTANT) if you use DEFAULT-AUTHENTICATE to validate user´s MAC ADDRESS, then you have to UN TILT the DEFAULT FORWARD OPTION in every registry in your ACCESS-LIST. So: If you are NOT USING access-list : UNTILT DEFAULT FORWARD option in the wirel...
I cannot find the command : /tool/dns-update in OS 2.9.43 so my DDNS script (ChangeIP.com) stop working.. It ´s that correct ? My DDNS Script : :log info "DDNS: Begin" :global ddns-user "myuser" :global ddns-pass "mypass" :global ddns-host "myhost" :global ddn...
I have a RB532 R5 with OS 2.9.43 .. I cannot run scripts with scheduler or manually.... In other RBs with other OS version , the same scripts run normally... but in the new one NO.... What can I do ? :shock: Example of one script : :log message="MSG : Hello World !" DDNS ... etc... Regards
I have problems with two SR5s... I ´d tested in 3 Routerboards (RB532) and same results : In SYSTEM/RESOURCES/PCI I can see : Device : 00:04.0 Vendor : Atheros Communications, Inc. Name : AR5212 802.11abg NIC (rev: 1) IRQ : 142 But I cannot see the Interfaces in WIRELESS :shock: With others SR5s I s...
thanks for the answer in my case i have linux squid server running, but for several weeks i was trying to setup bandwith control on the server, but i saw the mikrotik documentation and my main ap is the mk, i wonder if could place the rules on the ap? You can create a rule per client in your AP (QU...
My company is an Authorized Canopy Solution Provider (ACSP), so we have Motorola Link Estimator Soft... I don´t know if it´s free or not.... Suggest : Google : Motorola Link Estimator :shock: The graphics are EXACTS, give me to Points with rivers, or mountains in the middle.. and you can see ... Reg...
Great cards and very reliable. As far as distance... To many variables in that one to answer. Keep in mind that for power there are other cards available. The three 2.4GHz cards that get my vote (depending upon application) are: R52 (Mikrotik) SR2 (Ubiquiti) XR2 (Ubiquiti) NL2511+ (SENAO) R52 (Mikr...
NL2511 don´t support WDS
I suggest you to make Mesh with SR5 or XR5 and you can use NL2511 as APs... so you can make Mesh in 5.8 and distribution in 2.4
You can inmediately put 3 x R52 in one bridge with the same SSID... For example SSID : ActualSSID And you can create a virtual AP in every R52 with differents SSIDs, like : R52(1): Sector1 R52(2): Sector2 R52(3): Sector3 All your clients will be connected with ActualSSID , and you can change the cli...
Are you using the latest MikroTik software? There is a big difference in the assosiation of clients handling. I had this problem I think before version 2.9.29. Gave up on UBNT but gave it another go at v 2.9.30 and the problems were gone. Router OS tested : 2.9.27 and 2.9.35 :cry: I suppose that th...
I think that everyone who has a problem with WIFI says : " ... Interferences ..." and that´s no real reason everytime.... A good configuration in your APs or a bad one is the difference in a lot of cases.... For example, I had a lot of clients using standars APs (Senao, Micronet, Dlink, Lu...
I has RB532A + SENAO NL2511 running well... I decided to change SENAO to SR2 but when I use this MINIPCI clients cannot connect and the LOG says : 12:55:57 wireless,info Ubiquiti: data from unknown device 00:0E:2E:93:CE:9A, sent deauth (11 events suppressed) 12:55:57 system,info,account user admin l...
I have more than 30 MKTs on FMs Towers without problems.... but in one tower with FM dipoles too I had the same problem like you.. 1.- First I had changed the UTP with FTP... nothing changes... 2.- Change standar RJ45 with shieldeds.... nothing changes... 3.- Coneccted the FTP to a direct NEW ground...
I have an ADSL in my house with dynamic IP. I want to access a remote MKT... that´s easy.. but I want to filter in the remote MKT to only allow INPUT to my PC (That has dynamic address) In the firewall filter rules I can only set SRC-ADDRESS with an static IP, but my IP change continuously.... regards
Ah, so you are on a dynamic IP trying to connect to a remote MT on a static ip ? If so, then its an option to run a script to do a :resolve and populate that address every so often, or even better use a port knock (instant access). Sam Yes, that´s my configuration.... where can I find the script ?
The folks at mikrotik thought that all routers should run at GMT to keep stuff synchronized. Spiffy, eh? It's an old Cisco thing to keep everything running at one particular time zone. I guess if you think on a large scale it would make sense. So you say that this is not a bug ? jojojo.... they are...
Hi all... I have a problem with the MKT 532 Clock... - I have rules in my firewall with time conditions (Ex. : 12.30 - 13.30) - I ´m using the NTP Client (sync. well) - My country time-zone=-03.00 and with this parameter I see the correct hour in the clock (EX. : 12.45 in the clock when the Greenwit...
I have similar problems with DLINKS and ONE MKT AP (2.5 PRISM) In this AP all the dlinks (PCI, BRIDGES, etc) only connect a pair of seconds when you restart the MKT AP (changing some configuration like channel, forward, etc...) I have a lot of MKT APs with SENAO 2511 200 mw with no problems... but o...