I have no experience of EdgeRouter X. Maybe someone else can answer your question.In your opinion, what better to buy, RB750Gr3 or EdgeRouter X/EdgeRouter Lite? What will be more stable with IPsec?
I have no experience of EdgeRouter X. Maybe someone else can answer your question.In your opinion, what better to buy, RB750Gr3 or EdgeRouter X/EdgeRouter Lite? What will be more stable with IPsec?
The difference is that EdgeRouter X has 256 MB NAND. EdgeOS might need 256 MB of storage space to fit all applications.Hej
Dual-Core 880 MHz, MIPS1004Kc etc.. similar specification as Ubu EdgeRouter . Hmmm...Interesting.
Thanks, the script works very well.The logging facility is added in complete version.
This is the complete script, without the interruption to explain what's happen:
Please, add S-RJ01 to your product portfolio. A 10GbE version would also be nice.you get 1 module for each router purchase. And it comes bundled with the router.
If I connect two switches through their 10 Gigabit interface, what speed can I expect (no routing, just bridging)?Two SFP+ 10G ports and 24 Gigabit copper ports
If it is not due to a missing firewall rule for IPsec UDP port 500 and IPsec-ESP/IPsec-AH, then it must be a missing NAT bypass rule.Brench offices do not ping and connect each other.
No, you do not need NAT for your VPN connection. Depending on the configuration, you might need a NAT bypass rule placed at the top of all other NAT rules.I didnt nat it because i use VPN , do i need to nat ???
Do you mean hardware fast path? I do not think that this feature is complete yet, or available for this product.I was under the impression that basic routing will be done by hardware.
Do not be so sure about that, it does not look right.I'm sure the date and time correctly
invalid-before=oct/21/2013 11:36:29
invalid-after=dec/31/1969 23:59:59
Sorry I do not have access to this router, but casing of the unit is cold.Can you tell how much is CPU% and if it is getting too hot?
You need to upgrade if you run hypervisor 5.1. Log in with your account and download product patches.Thanks for the info, but i actually did not understand what you mean, is this a known issue fixed with patch, or you are basicly telling me to try
Do you think that this little detail was quite irrelevant and barely worth mentioning in the first place? This little piece of information changes everything, right now I do not have any solution for you.One domain, differend port numbers
Where are you browsing from, the client computer in your drawing?so tell me how to add static DNS entry that redirects me from port 81 to port 80?
I want to put address http://<my_domain>:81 in my web browser and get connection to server2 on port 80 (10.1.1.196:80)
Add a static DNS entry for your web server.Is there any another way to configure this?
I had this issue before I upgraded ESXi 5.1 with the latest patches.I have 5 VM Routers, only one randomly stops network traffic tho.
Gonna try to recreate VM and reinstall ROS, I will see if that helps or not.
No I did not because I downloaded the brochure for the first time just before i posted.Did you try reloading? Because I don't see this You probably have browser cache
The link in the first post.Brochure is correct. Where did you see this? If on distributor site, we can't correct that.
The RB951Ui-2HnD is a wireless SOHO Gigabit AP with a new generation
Atheros CPU and more processing power.
Five independent 10/100 Ethernet ports
Forbidden
You don't have permission to access /share/index.php on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
Midsummer celebrations is one of the most important holidays of the year in many countries.But today this forum does. Is Midsummer really a holiday in Latvia?
ipv6 firewall mangle add new-routing-mark=
R2N and R52N.Chipsets don't have output powers. You must compare the actual cards, as they have different amplifiers in them and other things. Which cards are you comparing?
I found a minor GUI bug in the DHCPv6 Server Bindings. IPv4 servers show up in Winbox and Webfig.All reported issues are fixed
I upgraded and the issue with VLAN has been resolved.Hi,
VLAN issue for x86 fixed in 6.1 rc1
http://www.mikrotik.com/download/share/ ... 6.1rc1.npk
but I'm not sure I wanna test it again ...
1000BASE-T requires eight wires to operate, the data is transmitted over all four copper pairs eight bits at a time.
I have only 4 (four) wires.
I think 2fast4youbr meant that you should connect a VLAN capable switch to eth4.I don't really get what you mean by putting a switch on eth4, I think I only have one switch on this board (RB951G-2HnD).
This is the default settings.I was thinking to use eth1 as a management port and the ports from eth2 to eth5 as a switch.
No, this issue has to do with with some websites.This problem (ends with 0) is with all RB products?
Name of the server. If set to all, then binding applies to all created DHCPv6 servers.
Can you give me an example, thanks.And the perl script you gave me as example - gives invalid result for /0 mask. In that RFC (see the examples in the RFC) - should be no octets, but the perl script gives one .
TCP Bandwidth Test to localhost (127.0.0.1). If you have a firewall rule that drops everything to input chain, disable it before you run the test.Strange request (normally users would be seeking advice to reduce CPU load)but any suggestions how to simulate high CPU load to test this script?
No, it will only affect the number of active HotSpot users, active User Manager sessions and number of tunnels (excluding EoIP tunnels).Does license level also effect IPs being routed via RouterOS when used as BGP router..?
Download link expired.
I think you need rules for SIP and RTP.The RouterOS has setup NAT, but nothing related VoIP ports:
Are you not afraid of server misuse and abuse? I remember this NTP server abuse from Netgear.Note: If your not going to use our services then please do not use our IP detectors. : )
/interface ethernet blink ether1
The first sold units, but this has been fixed a while ago.my reseller said sxt not withstand weather conditions is it is true?
Still waiting!v5.2 will be released tomorrow.
Can also be changed in 4.xx.In version 5.0 the opportunity to change the frequency of the processor.
Go for the SXT unit, with a wireless link of only 200m you will get maximum throughput of 200 Mbit/s (100 Mbit/s Upstrem and 100 Mbit/s Downstream).So there is no one who can advise me on the merits of the SXT devices as opposed to two 411's /711's with antennas ?
I wonder if the price of RB751 can match Ubiquiti Networks AirRouter?Wow guys, if you put the price of the RB751, RB751U and RB751G at almost the same price as RB750 or RB750G, I'll buy a lot... I was dreaming about this day long time ago.. lol
This page looks empty.SSTP, L2TP and PPtP can be bridged see BCP
http://wiki.mikrotik.com/wiki/Manual:BC ... _bridging)
SSTP is only for remote client access, it does not support site-to-site VPN tunnels.Why use OpenVPN when there are much better options like PPTP, SSTP, L2TP ?
I found new 10 Gigabit dual port server adapters from $220 and up.$1500 range appears to be minimum.
Maybe the picture is photoshopped.how can it have such long uptime, if the router is only up for 8 days ?
keep an eye on it and see if the time reset after 497 days.What about my uptime ? I am very near to end of counter now
I need it for IEEE 802.1X port-based authentication on my switches.As far as I know there is no plans for near future, but it could be possible in future.
/ip route add dst-address=209.41.78.64/27 gateway=208.53.48.254
The only error I saw was this one:This script is on RouterOs 2.951 what i should change
do ={
do={