Community discussions

MikroTik App

Search found 139 matches

by Michael12345
Sun Feb 21, 2010 11:03 am
Forum: General
Topic: how to construct a Lan of game?
Replies: 5
Views: 1329

Re: how to construct a Lan of game?

I mean that whether if the Mikrotik can control or eliminate the spread of Lan virus through drop all ports except several game ports. Can this way avoid Lan virus' spread effectively? Thank you .
I most concern is the Lan virus spread.
by Michael12345
Sat Feb 20, 2010 10:09 am
Forum: General
Topic: how to construct a Lan of game?
Replies: 5
Views: 1329

how to construct a Lan of game?

I want to construct a Lan of game to play something like Starcraft,Redalert,Dutycall and so on between my neighbours.But the most concern is the Lan virus,does Mikrotik can deal with the Lan virus like drop all ethernet ports except individual ports which used to transmit the game data with eachothe...
by Michael12345
Sat Feb 20, 2010 9:45 am
Forum: General
Topic: what is the functionality of the "bridge"?
Replies: 5
Views: 1182

Re: what is the functionality of the "bridge"?

Is it equal to "ebtables" in Linux?
by Michael12345
Thu Feb 18, 2010 11:52 am
Forum: General
Topic: How to erase a global variable?
Replies: 2
Views: 753

Re: How to erase a global variable?

http://forum.mikrotik.com/viewtopic.php?f=9&t=28457 Still works on 4.5: [admin@rb750g] /system script> pri Flags: I - invalid 0 name="test" owner="admin" policy=ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive run-count=0 source= :global test "This is a...
by Michael12345
Thu Feb 18, 2010 11:45 am
Forum: General
Topic: what is the functionality of the "bridge"?
Replies: 5
Views: 1182

what is the functionality of the "bridge"?

Does it only use in wireless network?
by Michael12345
Thu Feb 18, 2010 6:40 am
Forum: General
Topic: Please who will kindly offer me a HTB scripting to refer?
Replies: 3
Views: 901

Re: Please who will kindly offer me a HTB scripting to refer?

Thank you, that link I had read it before,but there are just explanations of HTB usage, no real examples of scripting in it.
by Michael12345
Thu Feb 18, 2010 6:37 am
Forum: General
Topic: How to erase a global variable?
Replies: 2
Views: 753

How to erase a global variable?

I have set a global variable,now I want to erase it from Mikrotik,how to do?Thanks
by Michael12345
Wed Feb 17, 2010 6:49 pm
Forum: General
Topic: Please who will kindly offer me a HTB scripting to refer?
Replies: 3
Views: 901

Please who will kindly offer me a HTB scripting to refer?

I am a newbie of Mikrotik,if somebody would kindly offer me a working HTB scripting to refer,I will very appreciated,thank you very much.
by Michael12345
Tue Feb 16, 2010 6:50 pm
Forum: General
Topic: Is the Mikrotik embedded proxy is squid or other else?
Replies: 1
Views: 714

Is the Mikrotik embedded proxy is squid or other else?

May I know the type of the Mikrotik proxy? thanks
by Michael12345
Mon Feb 15, 2010 9:00 am
Forum: General
Topic: Did I do the correct NTH load balancing?
Replies: 6
Views: 1467

Re: Did I do the correct NTH load balancing?

thank you.
by Michael12345
Mon Feb 15, 2010 6:44 am
Forum: General
Topic: Did I do the correct NTH load balancing?
Replies: 6
Views: 1467

Re: Did I do the correct NTH load balancing?

'per packet load balancer' is a dream. it can't exist until you do bonding
Thank you.
Do you mean that if I use bonding that can achieve real "per-packet" load balancing? Where can I refer the relating tutorials?
by Michael12345
Sun Feb 14, 2010 6:00 pm
Forum: General
Topic: Did I do the correct NTH load balancing?
Replies: 6
Views: 1467

Did I do the correct NTH load balancing?

I have done NTH load balancing according to http://wiki.mikrotik.com/wiki/Improved_Load_Balancing_over_Multiple_Gateways. but when I browse the webpage, it seems work perfectly shown in tcp_webpage.jpg, But when I download files or visit webTV it seems unworkable like what it shown in tcp_download.j...
by Michael12345
Thu Feb 11, 2010 7:42 pm
Forum: General
Topic: How to use Mikrotik wiki?
Replies: 4
Views: 1403

Re: How to use Mikrotik wiki?

michael, why is your computer changing the colors of the webpage to gray :) you are missing some important content this way :) lists of articles: official: http://wiki.mikrotik.com/wiki/Category:Manual by users: http://wiki.mikrotik.com/wiki/MikroTik_RouterOS haha,this is my peculiar way to save ey...
by Michael12345
Wed Feb 10, 2010 7:11 pm
Forum: General
Topic: How to use Mikrotik wiki?
Replies: 4
Views: 1403

How to use Mikrotik wiki?

I want to chase the other articles of the writer who wrote in the following picuture.But when I type "http://wiki.mikrotik.com/wiki/",it just list the pages which I don't concern.where I can refer the catalogue of all the articles in the Mikrotik wiki?
by Michael12345
Tue Feb 09, 2010 7:17 pm
Forum: General
Topic: Erratic behavior!
Replies: 2
Views: 869

Re: Erratic behavior!

No one know why? It is still haunting me now.......
by Michael12345
Mon Feb 08, 2010 7:11 pm
Forum: General
Topic: How to reorder the sequence in the "mangle"?
Replies: 6
Views: 2338

Re: How to reorder the sequence in the "mangle"?

It would make a difference if you had any other mangle rules in the 'forward' chain. But you don't. Rule order is only important within the same chain.
oh,I see, thank you very much.
by Michael12345
Mon Feb 08, 2010 7:07 pm
Forum: General
Topic: Is ther a handy but working HTB scripting?
Replies: 1
Views: 640

Is ther a handy but working HTB scripting?

The theory of HTB is quite profound,it had cost me a few days to understand,so is there a handy and representative HTB scripting that I can use it and research it at the same time.Thanks.
by Michael12345
Mon Feb 08, 2010 6:57 pm
Forum: General
Topic: MUM in CHINA 2010
Replies: 72
Views: 16045

Re: MUM in CHINA 2010

Normis, do you speak Mandarin? =)
I didn't say I was going :)
You will make me feeling down if you haven't intention to come GZ. :)
by Michael12345
Mon Feb 08, 2010 6:48 pm
Forum: General
Topic: How to reorder the sequence in the "mangle"?
Replies: 6
Views: 2338

Re: How to reorder the sequence in the "mangle"?

No, I mean that change-mss rules are in "forward" chain but other rules are in "prerouting" chain. Those two chains are independent. Here you can read more about chains: http://wiki.mikrotik.com/wiki/Firewall_filter#Chains And here you can see packet flow diagram http://wiki.mik...
by Michael12345
Sat Feb 06, 2010 6:23 pm
Forum: General
Topic: Erratic behavior!
Replies: 2
Views: 869

Erratic behavior!

I have two adsl,and using load balancing, but whether I using NTH or PCC, there is a common erratic phenomenon that is when I re-installed Mikrotik, I can log on any web page normally,but after few hours later,when I re-log-on these websites which I ever log-on just dozens minutes ago,many pictures ...
by Michael12345
Fri Feb 05, 2010 11:49 am
Forum: General
Topic: How to reorder the sequence in the "mangle"?
Replies: 6
Views: 2338

Re: How to reorder the sequence in the "mangle"?

In your case dynamic rules and static rules are in different chains, and it won't make any difference if you move dynamic rules up. Do you mean that dynamic rules of "change MSS" is redundant ,and useless? because I have set "passthrough" is "no" in the frontal rules, ...
by Michael12345
Fri Feb 05, 2010 10:37 am
Forum: General
Topic: How to reorder the sequence in the "mangle"?
Replies: 6
Views: 2338

How to reorder the sequence in the "mangle"?

I have two adsl as Wan,but everytime after I re-dial pppoe-out* again,the four dynamic "change MSS" which originally are placed in first four position would down to the bottom like what shown in the following picture, I found that would causes many pictures in web page can't open. Is there...
by Michael12345
Wed Feb 03, 2010 11:39 am
Forum: General
Topic: Settings all suddently disappear,did you ever met it before?
Replies: 5
Views: 1004

Re: Settings all suddently disappear,did you ever met it before?

are you sure nobody did "system reset" here :) ? Only I use the router,no other people in my home. and if it caused by "system reset", I wonder that why the settings in router would gone ? and the facts is that when it happened, I am sitting in front of the router downloading at...
by Michael12345
Wed Feb 03, 2010 11:25 am
Forum: General
Topic: Settings all suddently disappear,did you ever met it before?
Replies: 5
Views: 1004

Re: Settings all suddently disappear,did you ever met it before?

Thank you very much Chupaka. After read your answer, there are still three questions. Question one: If it is just reboot the router owing to kernel panic or hardware malfunction, why the settings in harddisc is gone? IF just reboot, settings will still be there,right? Does these settings only exists...
by Michael12345
Wed Feb 03, 2010 10:44 am
Forum: General
Topic: Is there a concept of "Pointer" like in C language?
Replies: 4
Views: 1437

Is there a concept of "Pointer" like in C language?

For instance, { :local type1 http; :local type2 webbank; :local type3 game; :local type4 p2p; for i from=1 to=3 do={ :local x; :set x ("type" . $i) :put $x /ip firewall mangle add action=mark-connection chain=prerouting protocol=tcp dst-port=80 new-connection-mark=$x }} In this case,the &q...
by Michael12345
Tue Feb 02, 2010 6:06 pm
Forum: General
Topic: Settings all suddently disappear,did you ever met it before?
Replies: 5
Views: 1004

Settings all suddently disappear,did you ever met it before?

All settings in Mikrotik sunddently disappeared for several times during these few weeks, it seems like a crash,and after I re-import the settings,it would work perfectly again. Since I installed the Mikrotik in CF card , not hard disc,so I don't know whether it is peculiar with my CF card or it wou...
by Michael12345
Fri Jan 29, 2010 4:37 pm
Forum: General
Topic: pppoe gateway issue
Replies: 5
Views: 1337

Re: Veterans Please come in.

but how about in mangle? where do you need that in Mangle?.. The highlight line in the 11.picture. " add chain=prerouting dst-address=10.111.0.0/24 action=accept in-interface=Local add chain=prerouting dst-address=10.112.0.0/24 action=accept in-interface=Local " These two lines I am estre...
by Michael12345
Fri Jan 29, 2010 5:52 am
Forum: General
Topic: pppoe gateway issue
Replies: 5
Views: 1337

Re: Veterans Please come in.

Thank Chupaka,it seems work in setting of route,but how about in mangle? There is no "pppoe-out*" options in it.by the way , I am using the PCC load balancing, so I had to set these in mangle ,do you have any others good suggestions?
by Michael12345
Thu Jan 28, 2010 7:11 pm
Forum: General
Topic: pppoe gateway issue
Replies: 5
Views: 1337

pppoe gateway issue

I found a grotesque by coincidence show in following picture.As usual, pppoe-out1's gateway should be 113.68.141.1,and pppoe-out2's gateway should be 113.68.142.1, it should be two different gateway,but now like what you seen in the picture, it's the same and it's neither 141 nor 142,it's 140. Why? ...
by Michael12345
Thu Jan 28, 2010 6:37 pm
Forum: General
Topic: How to get the gateway of a dynamic address?
Replies: 4
Views: 1686

How to get the gateway of a dynamic address?

How to change a dynamic address into a it's gateway in scripting? for example, I got a dynamic address 113.68.141.5,now I want to change it into its gateway form 113.68.141.1,how to acheive it in scripting? and how about change the address into the form like this 113.68.141.0/24? {:local address 113...
by Michael12345
Sun Jan 24, 2010 7:00 pm
Forum: Wireless Networking
Topic: Ekkas,are you here? There is a question......
Replies: 1
Views: 666

Ekkas,are you here? There is a question......

I have tried PCC and NTH these days,my experience is PCC less than NTH in bandwidth utilization,but I feel that NTH is evidently longer latency than PCC,why NTH has longer latency than PCC that much? Is that normal or just I make some mistake in somewhere? I appeal to ekkas since he has many years'...
by Michael12345
Sat Jan 23, 2010 5:55 pm
Forum: General
Topic: MUM in CHINA 2010
Replies: 72
Views: 16045

Re: MUM in CHINA 2010

I found that there are three website in China are discuss soft router,no one in GZ. One is your deputy in Sichuan,and its website is already flaunting the MUM message, and the other two are still not yet,and they are not only discuss Mikrotik, but also talk about smoothwall, Ipcop and so on other so...
by Michael12345
Fri Jan 22, 2010 12:03 pm
Forum: General
Topic: MUM in CHINA 2010
Replies: 72
Views: 16045

Re: MUM in CHINA 2010

Thanks, Michael12345! Did you register yourself already for the MUM? Remember, it's free!
I haven't register in MUM yet, since I am just an amateur,so I fear that I havent't eligibility to register.Do you have agency or staff member in GZ to arrange the GZ's schedule?
by Michael12345
Thu Jan 21, 2010 5:47 pm
Forum: General
Topic: Does the NTH load-balance have a bad influence to net game?
Replies: 2
Views: 781

Re: Does the NTH load-balance have a bad influence to net game?

avoid nth for load ballancing if you use NAT (eg. masquerade ) use PCC instead. you can find how to use PCC on forum and wiki.
But some users said that NTH is better than PCC.I just don't know what to do,Is there a standard answer for it,or a ultimate solution of load-balance once and for all?
by Michael12345
Thu Jan 21, 2010 5:25 pm
Forum: General
Topic: MUM in CHINA 2010
Replies: 72
Views: 16045

Re: MUM in CHINA 2010

"Guangzhou is a good location because it's a travel hub (we can easily travel there), and many technology companies also there."---------If you chosen GZ to hold a meeting base on that argument that you are correct,GZ is one of the most wealthy and most developing city in China,as I mentio...
by Michael12345
Thu Jan 21, 2010 2:23 pm
Forum: General
Topic: MUM in CHINA 2010
Replies: 72
Views: 16045

Re: MUM in CHINA 2010

:lol: Guangzhou, welcome everybody, I am a Guangzhou native,welcome to my hometown. If it is needed, I volunteer as an interpreter and guide you all to travel Guangzhou city,to appreciate a city which has thousand years' culture and history. and visit the development of socialism for decades. wow, ...
by Michael12345
Thu Jan 21, 2010 11:48 am
Forum: General
Topic: MUM in CHINA 2010
Replies: 72
Views: 16045

Re: MUM in CHINA 2010

:lol: Guangzhou, welcome everybody, I am a Guangzhou native,welcome to my hometown. If it is needed, I volunteer as an interpreter and guide you all to travel Guangzhou city,to appreciate a city which has thousand years' culture and history. and visit the development of socialism for decades. But my...
by Michael12345
Thu Jan 21, 2010 11:36 am
Forum: General
Topic: Does the NTH load-balance have a bad influence to net game?
Replies: 2
Views: 781

Does the NTH load-balance have a bad influence to net game?

I have two adsl and use it individually, but now I want to combine them by NTH load-balance,but I fear that NTH is working in a packet interrupted method,it's wellkonwn that it would do harm to the net bank,but does it influence the net game also? If it does do bad to the net game, how to deal with ...
by Michael12345
Tue Jan 05, 2010 4:52 pm
Forum: General
Topic: How to achieve this goal?
Replies: 4
Views: 1182

Re: How to achieve this goal?

Have a look at this wiki article. Whilst it's not pretty it worked for me (I wrote the wiki). http://wiki.mikrotik.com/wiki/Lan2lan Just change the IP's to suit what you are after. Josh. Thank you Josh, it seems work for me as well,I can't try now,I will test it about next month, and I will report ...
by Michael12345
Tue Jan 05, 2010 8:26 am
Forum: General
Topic: How to achieve this goal?
Replies: 4
Views: 1182

Re: How to achieve this goal?

U wanna add queues to all ethernet users, but queue should not limit traffic from several IP's? Or u wanna setup queues for all ethernet users except those who have ect. 219.136.245.128 IP ?
I want to add queues to all ethernet users, but queue should not limit traffic to 219.136.245.128.
by Michael12345
Mon Jan 04, 2010 6:21 pm
Forum: General
Topic: How to achieve this goal?
Replies: 4
Views: 1182

How to achieve this goal?

I want to set up a speed limitation to ethernet 192.168.1.0/24 except several IP address 219.136.245.128 etc. In other words, when I access 219.136.245.128, it's no speed limitation. But when I use "!219.136.245.128",notice there is an exclamation sign,it can be set in simple queue,how to ...
by Michael12345
Sun Jan 03, 2010 10:58 am
Forum: General
Topic: Suggestion-------Does script language have a predefinition?
Replies: 1
Views: 713

Suggestion-------Does script language have a predefinition?

It's well known that there is a predefinition in C language like "#define time 8".and predefinition hold an important position in C language because it is very useful in debug and alteration. But I can't find it in script language in Mikrotik.Does that anyone can suggest a substitution or ...
by Michael12345
Sun Jan 03, 2010 10:48 am
Forum: General
Topic: Can I give a variable to a name of variable?
Replies: 12
Views: 2041

Re: Can I give a variable to a name of variable?

What difference does it make who is on staff? More answers here come from NON staff than staff. Thank you Butche, just since there are a lot of amateurs here who with enthusiasm offer those ambiguous and even wrong reply,just make me away further to the correct answer, so I had to distinguish who i...
by Michael12345
Wed Dec 30, 2009 6:21 pm
Forum: General
Topic: Questions about ECMP load balancing.
Replies: 14
Views: 3143

Re: Questions about ECMP load balancing.

I known that PCC is more stable owing to PCC do not interrupt the connection,but what is meaning of "PCC..... do not waste connection marks"?
by Michael12345
Wed Dec 30, 2009 5:33 am
Forum: General
Topic: Questions about ECMP load balancing.
Replies: 14
Views: 3143

Re: Questions about ECMP load balancing.

Chupaka: Since ECMP has "flushing" major defect,then what particular merit dose ECMP have compare with "NTH" and "PCC" load-balancing? If no,I think ECMP is of little usefulness.
by Michael12345
Tue Dec 29, 2009 7:05 pm
Forum: General
Topic: Questions about ECMP load balancing.
Replies: 14
Views: 3143

Re: Questions about ECMP load balancing.

thank you
by Michael12345
Tue Dec 29, 2009 6:57 pm
Forum: General
Topic: Can I give a variable to a name of variable?
Replies: 12
Views: 2041

Re: Can I give a variable to a name of variable?

oh, thank for your link.but Chupaka is not Mikrotik's staff either, I consider he is the staff of MT formerly and deem him has a profound foundation of Mikrotik.
by Michael12345
Tue Dec 29, 2009 6:52 pm
Forum: General
Topic: Questions about ECMP load balancing.
Replies: 14
Views: 3143

Re: Questions about ECMP load balancing.

BTW - ECMP works fine without src-nat, flushing have no effect then. What do you mean without src-nat? What is "BTW-ECMP"? is it equivalent to "ECMP"? chupaka: What is the meaning of "if users are assigned public IPs"? Do you mean don't masquerade but do it like this--...
by Michael12345
Tue Dec 29, 2009 6:39 pm
Forum: General
Topic: Can I give a variable to a name of variable?
Replies: 12
Views: 2041

Re: Can I give a variable to a name of variable?

fewi: are you a staff of Mikrotik?
by Michael12345
Tue Dec 29, 2009 4:18 pm
Forum: General
Topic: Can I give a variable to a name of variable?
Replies: 12
Views: 2041

Can I give a variable to a name of variable?

For example: {:local x 3; for i from=1 to=$x do={:local ether . $i} } The script above can't run in terminal. It reported an error. I don't know where is the error? How to revise to make the script run of success? My attention is to set several variable,but the amount of variable is not fixed, it sh...
by Michael12345
Tue Dec 29, 2009 4:01 pm
Forum: General
Topic: How to get "interface-name" by its' id ?
Replies: 30
Views: 34321

Re: How to get "interface-name" by its' id ?

Chupaka: you do me a great favor,you are so professional,thank you indeed.
by Michael12345
Mon Dec 28, 2009 11:37 am
Forum: General
Topic: How to get "interface-name" by its' id ?
Replies: 30
Views: 34321

Re: How to get "interface-name" by its' id ?

fewi: maybe I can achieve my goal by make a detour like what example you gave to make use by "MTU" etc, but that would foul up the code, and after a period of time, I maybe confuse by this segment of "make detour" code, or if this code be takeovered by other people(e.g successor)...
by Michael12345
Mon Dec 28, 2009 11:18 am
Forum: General
Topic: Help, my ISP cut my adsl because I have a ethernet.
Replies: 5
Views: 1395

Re: Help, my ISP cut my adsl because I have a ethernet.

Can you use a different service tier or switch ISPs?
All ISP in china would block ethernet sharing ADSL, they expended a lot money on this field research.
by Michael12345
Mon Dec 28, 2009 11:08 am
Forum: General
Topic: How to get "interface-name" by its' id ?
Replies: 30
Views: 34321

Re: How to get "interface-name" by its' id ?

Thank your reply first. My intention is to code a script that can get the name about the existing router's Network Card and how many Network Card had been installed,can you tell me how to do can success that aim? "ID" is vital, if not available now, add in to the next version would be wise...
by Michael12345
Mon Dec 28, 2009 5:49 am
Forum: General
Topic: How to get "interface-name" by its' id ?
Replies: 30
Views: 34321

Re: How to get "interface-name" by its' id ?

It's really ridiculous, "id" is so important, you bold to say "make no sense"? 1. I consider that one advantages compare with windows is Linux can be easily configured by script at will,not by "winbox" manually. Among other things,rules in Mikrotik is executed by it's o...
by Michael12345
Sun Dec 27, 2009 6:49 pm
Forum: General
Topic: How to get "interface-name" by its' id ?
Replies: 30
Views: 34321

How to get "interface-name" by its' id ?

I want to get "interface-name" through its' "id" by script,so call "id" is the figure in the title of "#" column in the following picutre.what is the parameter of the "#"? like "name" express "ether1_Lan", "type" express...
by Michael12345
Sun Dec 27, 2009 5:54 pm
Forum: General
Topic: Who can help me ?
Replies: 6
Views: 1114

Re: Who can help me ?

these lines are for router management via uplinks - you to be able to connect to the router from the Internet also, if you use load-balancing and webproxy, you should deal with output chain to balance proxy requests I can't catch your substances indeed.First,load balancing is deal with the forward ...
by Michael12345
Sun Dec 27, 2009 11:40 am
Forum: General
Topic: Who can help me ?
Replies: 6
Views: 1114

Re: Who can help me ?

"local process-in" and "local process-out"?Give me some examples please. examples: ospf sessions, routeros web server (webbox), winbox server, proxy, etc After I read your reply,I consider that "local process-in" only deal with the processes which about the management ...
by Michael12345
Sun Dec 27, 2009 4:53 am
Forum: General
Topic: Help, my ISP cut my adsl because I have a ethernet.
Replies: 5
Views: 1395

Re: Help, my ISP cut my adsl because I have a ethernet.

Thank both,is there a link that systematiclly discuss this issue?
by Michael12345
Sat Dec 26, 2009 4:53 pm
Forum: General
Topic: How make a script of constant traffic monitor?
Replies: 6
Views: 1905

Re: How make a script of constant traffic monitor?

"connectino rate",before I read your reply, I first heard of it. It's excited, maybe this new term would bring a new functionality ,I am consulting the reference of the"connection rate",thank you.
by Michael12345
Sat Dec 26, 2009 4:07 pm
Forum: General
Topic: Questions about ECMP load balancing.
Replies: 14
Views: 3143

Re: Questions about ECMP load balancing.

ECMP load balancing is a good method for balancing multiple ISP connections.
And it is really simple to set it up.

But it has its limitations. And "The routing table flushing" is its main "defect".
thanks,
Did you ever crash the ambulance before?hehe?
by Michael12345
Sat Dec 26, 2009 4:03 pm
Forum: General
Topic: Help, my ISP cut my adsl because I have a ethernet.
Replies: 5
Views: 1395

Help, my ISP cut my adsl because I have a ethernet.

Our ISP has been rejected multi-hosts to share an adsl for so many years, and they try to detect the hosts behind the modem by all means. I have two questions here: 1. Does the packets which leaved the router still contain the information of the host like MAC or ethernet IP address etc? 2. Is there ...
by Michael12345
Thu Dec 24, 2009 6:02 pm
Forum: General
Topic: Questions about ECMP load balancing.
Replies: 14
Views: 3143

Questions about ECMP load balancing.

I just read the topic about ECMP load balancing from this link http://wiki.mikrotik.com/wiki/ECMP_load_balancing_with_masquerade. and my english is unwell,so can't catch the precise meaning of some sentences. 1. Does "known issues" this phrase mean that issues which is known surely and def...
by Michael12345
Thu Dec 24, 2009 4:45 am
Forum: General
Topic: How to reset the router?
Replies: 1
Views: 693

How to reset the router?

I seem can't find the "reset" button in winbox,how to reset the router if it's needed.
by Michael12345
Thu Dec 24, 2009 4:41 am
Forum: General
Topic: A little bug...
Replies: 7
Views: 2713

Re: A little bug...

windows can use as many as you add. 1. yes,I had said that in console it can be conducted more than two DNS, but I want automated import, so must be conducted by script. 2. Almost every ISP provide two DNS, but it is far from enough, it did happen in my country just not long ago, the biggest ISP ha...
by Michael12345
Thu Dec 24, 2009 4:28 am
Forum: General
Topic: How make a script of constant traffic monitor?
Replies: 6
Views: 1905

Re: How make a script of constant traffic monitor?

I want to make a script that fulfill these functionalities:if traffic over 4M, then set a flag, then test it after 1 minute, if traffic still over 4M sustainingly, implement the PCQ limit. The key is how to "set a flag", and in the traffic-monitor,only there is trigger, no sustaining dete...
by Michael12345
Wed Dec 23, 2009 9:52 am
Forum: General
Topic: How make a script of constant traffic monitor?
Replies: 6
Views: 1905

How make a script of constant traffic monitor?

I want to make a script that fulfill these functionalities:if traffic over 4M, then set a flag, then test it after 1 minute, if traffic still over 4M sustainingly, implement the PCQ limit. The key is how to "set a flag", and in the traffic-monitor,only there is trigger, no sustaining detec...
by Michael12345
Wed Dec 23, 2009 8:47 am
Forum: General
Topic: How to execute more than one scripts in Netwatch?
Replies: 2
Views: 1215

Re: How to execute more than one scripts in Netwatch?

You can only specify one script. To work around that issue, make a script that calls the other two scripts: /system script run [/system script find name=firstScript] /system script run [/system script find name=secondScript] And call it from netwatch. I suggest should amend it, because nesting easi...
by Michael12345
Wed Dec 23, 2009 6:35 am
Forum: General
Topic: How to execute more than one scripts in Netwatch?
Replies: 2
Views: 1215

How to execute more than one scripts in Netwatch?

Shown in the following picture, I want to execute two scripts after router can't ping http://www.baidu.com,I have tried several signs like comma, colon, both can't work. thanks
by Michael12345
Tue Dec 22, 2009 6:47 pm
Forum: General
Topic: What's meaning of this sentence?
Replies: 1
Views: 762

What's meaning of this sentence?

What's the meaning of this sentence "Note Whenever possible, the same ip address is given out to each client (OWNER/INFO pair). " which I estreat from the this link http://wiki.mikrotik.com/wiki/Pools
by Michael12345
Tue Dec 22, 2009 6:24 pm
Forum: General
Topic: How to deal with decimal?
Replies: 3
Views: 1264

Re: How to deal with decimal?

From this link I can't find any snippet about manipulation of decimal,please give me a detail.
by Michael12345
Tue Dec 22, 2009 6:15 pm
Forum: General
Topic: Is it possible?
Replies: 3
Views: 1016

Is it possible?

I just saw a topic which posted few years ago and still no answer yet,I am very curious whether is it possible to achieve,if possible, how? The question is "access to network 0.0.0.0/0 with rate limit 256,512 or 1024 (rate limit of Hotspot profiles), and network 172.24.24.0/24 with non-rate lim...
by Michael12345
Mon Dec 21, 2009 6:38 pm
Forum: General
Topic: Who can help me ?
Replies: 6
Views: 1114

Who can help me ?

I have touched Mikrotik for several months,but now,frankly,I have still always been haunting with these some basic but very important concepts like input,forward,output etc. I deeply believe that if these concepts I can thoroughly understand, I can't get even further. Like the picture shown below,th...
by Michael12345
Mon Dec 21, 2009 4:44 pm
Forum: General
Topic: How to deal with decimal?
Replies: 3
Views: 1264

How to deal with decimal?

How to set a decimal to a variable?
by Michael12345
Mon Dec 21, 2009 11:03 am
Forum: General
Topic: Can I buy a level4 license from headquarters?
Replies: 5
Views: 1285

Re: Can I buy a level4 license from headquarters?

you can buy RouterOS licenses with a credit card from http://www.mikrotik.com

the price is 45$ for Level4.
Which kind of credit cart will do? International or domestic credit card? and where should I remit the money to?
by Michael12345
Mon Dec 21, 2009 5:42 am
Forum: General
Topic: Can I buy a level4 license from headquarters?
Replies: 5
Views: 1285

Can I buy a level4 license from headquarters?

I am in china, owing the price is more expensive from agency of china, I would rather buy level4 license from headquarters, if it's convenient, how is the procedure?
by Michael12345
Sun Dec 20, 2009 6:35 pm
Forum: General
Topic: Does the license tie up with HD number?
Replies: 6
Views: 956

Re: Does the license tie up with HD number?

yes. you can try to write to support at mikrotik dot com, afair replacement license costs $15, but they can ask for a proof: for example, to send dead HD to MT =) Are you joking? The costs of sending "corpse" will exceed it. Send the picture of the broken HD is reasonable in my view. I am...
by Michael12345
Sun Dec 20, 2009 4:55 pm
Forum: General
Topic: Where can I refer the meaning of these options?
Replies: 1
Views: 538

Where can I refer the meaning of these options?

The meaning of options in the "policy" frame like "reboot", "read", "write" etc...
by Michael12345
Sun Dec 20, 2009 3:41 pm
Forum: General
Topic: Does the license tie up with HD number?
Replies: 6
Views: 956

Does the license tie up with HD number?

If my hard disk broken down, I had to pay for the license once more?
by Michael12345
Sun Dec 20, 2009 3:29 pm
Forum: General
Topic: How to set on "scheduler"?
Replies: 3
Views: 1076

Re: How to set on "scheduler"?

Run the following command in the Terminal:
/system scheduler print detail
It should list the next-run correctly there I guess.

Thanks,it's normal now,this software really is bugs and peculiar...
by Michael12345
Sun Dec 20, 2009 3:16 pm
Forum: General
Topic: A little bug...
Replies: 7
Views: 2713

A little bug...

When I set rules from menu "DHCP-server", it can make more than 2 DNS-servers shown in the picture 1. But when I make rules by the scripts and import from new-terminal,it's prompting implied DNS-server should not have more than two DNS-servers, shown in the picture 2 and picture 3. By my e...
by Michael12345
Sun Dec 20, 2009 9:43 am
Forum: General
Topic: How to set on "scheduler"?
Replies: 3
Views: 1076

Re: How to set on "scheduler"?

No one can help me?
by Michael12345
Sun Dec 20, 2009 6:41 am
Forum: General
Topic: How to set on "scheduler"?
Replies: 3
Views: 1076

How to set on "scheduler"?

I intented to set a auto shutdown on 1:30 at every midnight in the "scheduler" like the picture shown below. But at the bottom line of the picture,it prompting next execute-time is not a day interval, did I have something wrong in setting? What is the correct setting?
by Michael12345
Sat Dec 19, 2009 4:02 pm
Forum: General
Topic: Does license of level_1 can do 3 adsl-pppoe load balance?
Replies: 2
Views: 656

Does license of level_1 can do 3 adsl-pppoe load balance?

I have three adsl-pppoe,and want do load balance,can level1 be capable to do this? How about PCC and PCQ speed limit?
by Michael12345
Sat Dec 19, 2009 6:18 am
Forum: General
Topic: How I can get the level1 license?
Replies: 5
Views: 1296

Re: How I can get the level1 license?


Why I can't log in by use the account "michael12345" which I logged on this fortum ? Do I have to register another account in that link?
by Michael12345
Sat Dec 19, 2009 5:43 am
Forum: General
Topic: How I can get the level1 license?
Replies: 5
Views: 1296

Re: How I can get the level1 license?

Log in, go to the main menu, click the "generate demo key" link and fill out the forums.
I should log on this forum or log on winbox? Where I can find "main menu" and "generate demo key" link?
by Michael12345
Sat Dec 19, 2009 5:14 am
Forum: General
Topic: How I can get the level1 license?
Replies: 5
Views: 1296

How I can get the level1 license?

I have already registered.
by Michael12345
Fri Dec 18, 2009 5:30 pm
Forum: General
Topic: Why is "system halted" not "power-off"?
Replies: 6
Views: 1746

Re: Why is "system halted" not "power-off"?

AFAIR, v4 shuts down the x86 completely
But I use v3.20, What should I do to power-off the computer by use command?
Can it be fixed in v3.20?
by Michael12345
Fri Dec 18, 2009 5:26 pm
Forum: General
Topic: Do the license of level 4 has fully functionalities?
Replies: 1
Views: 579

Do the license of level 4 has fully functionalities?

including scripts execution, differences between level 4 and level 6 just manifest in the limit of user's number?
by Michael12345
Thu Dec 17, 2009 5:30 pm
Forum: General
Topic: Why is "system halted" not "power-off"?
Replies: 6
Views: 1746

Re: Why is "system halted" not "power-off"?

Routerboard equipment doesn't have a "soft power" setup like most Windows-capable pc's. The pc's shut down (but not really) when you select shut down from the main menu. They are not really "shut down", but almost like "system halted". Power is still provided to a few ...
by Michael12345
Thu Dec 17, 2009 5:14 pm
Forum: General
Topic: What is line bonding?
Replies: 1
Views: 581

What is line bonding?

Where I can refer the reference of line bonding? Thanks.
by Michael12345
Thu Dec 17, 2009 4:56 pm
Forum: General
Topic: Why is "system halted" not "power-off"?
Replies: 6
Views: 1746

Why is "system halted" not "power-off"?

When I input "sys\shutdown", it only halted the system, not power off the computer. Why?
by Michael12345
Sat Dec 12, 2009 2:00 pm
Forum: General
Topic: Is it true that legends PCC working well than NTH?
Replies: 22
Views: 3516

Re: Is it true that legends PCC working well than NTH?

Have you tried PCC tonight? What the result is it? I am waiting your experiences. and what is the exacting meaning of "wait for the calls to come in"?
by Michael12345
Fri Dec 11, 2009 6:30 pm
Forum: General
Topic: Is it true that legends PCC working well than NTH?
Replies: 22
Views: 3516

Re: Is it true that legends PCC working well than NTH?

And I want to know that does the PCC is the perfect and ultimate solution of load balance?
by Michael12345
Fri Dec 11, 2009 6:16 pm
Forum: General
Topic: Is it true that legends PCC working well than NTH?
Replies: 22
Views: 3516

Re: Is it true that legends PCC working well than NTH?

I have heard other peoples said that only PCC balance can solve these problem, is it true?
PCC with classifier=both-addresses
What does it mean? Can you explain in detail please?
by Michael12345
Fri Dec 11, 2009 6:00 pm
Forum: General
Topic: Is it true that legends PCC working well than NTH?
Replies: 22
Views: 3516

Re: Is it true that legends PCC working well than NTH?

NTH is not a good solution, I have tried it just now,when I use NTH load balance,some applications like Web bank,can't log on. I have heard other peoples said that only PCC balance can solve these problem, is it true?
by Michael12345
Fri Dec 11, 2009 5:59 am
Forum: General
Topic: Is it true that legends PCC working well than NTH?
Replies: 22
Views: 3516

Re: Is it true that legends PCC working well than NTH?

you are so kindly, thank you much.
by Michael12345
Fri Dec 11, 2009 5:36 am
Forum: General
Topic: Is it true that legends PCC working well than NTH?
Replies: 22
Views: 3516

Is it true that legends PCC working well than NTH?

Is there any one have the experiences of these two manners of equal-load-balance? Share your view with us please. I want true experience not just theories.
by Michael12345
Fri Dec 11, 2009 4:27 am
Forum: General
Topic: Where I can find the PCC option in V3.6?
Replies: 14
Views: 1883

Re: Where I can find the PCC option in V3.6?

X.Y where X increases with major numbers and Y increases with minor numbers. Both increase strictly so 3.24 is more recent than 3.15 is more recent than 3.6 is more recent than 3.0. In other words, 3.25 is the 25th minor release of major version 3.
oh,thanks,where can I download v3.24 now?
by Michael12345
Fri Dec 11, 2009 4:00 am
Forum: General
Topic: Where I can find the PCC option in V3.6?
Replies: 14
Views: 1883

Re: Where I can find the PCC option in V3.6?

it should be 3.06 should be? really? for example, show me vanilla kernel version 2.6.09. oh, is it 2.6.9? did they forget how versions are count too? :D or maybe you are the only one who know that little secret? ))) Does anyone tell me how version be count? it confuses me much. It would be better i...
by Michael12345
Thu Dec 10, 2009 6:49 pm
Forum: General
Topic: Where I can find the PCC option in V3.6?
Replies: 14
Views: 1883

Re: Where I can find the PCC option in V3.6?

v3.6 older than v3.24?
by Michael12345
Thu Dec 10, 2009 6:19 pm
Forum: General
Topic: Where I can find the PCC option in V3.6?
Replies: 14
Views: 1883

Re: Where I can find the PCC option in V3.6?

Do you mean add these commands which first following picture shown to the "terminal" in order to added per-connection-classifier matcher to firewall? but after I input these commands, it prompted shown on the second following picture.
by Michael12345
Thu Dec 10, 2009 5:14 pm
Forum: General
Topic: Where I can find the PCC option in V3.6?
Replies: 14
Views: 1883

Where I can find the PCC option in V3.6?

I can't find the PCC option in my v3.6 as the picture shown below? How should I do?
by Michael12345
Thu Dec 03, 2009 11:22 am
Forum: General
Topic: Why I can't log on winbox after reinstalled the windows OS?
Replies: 7
Views: 4481

Re: Why I can't log on winbox after reinstalled the windows OS?

OR, click the MAC address instead of the IP address in the list. How and where I click the MAC address to instead the IP address, I curiously want to know? Thank you normis,I can enter the IP address in the "connect to" frame and logged on, I had overlooked it because of the background co...
by Michael12345
Thu Dec 03, 2009 11:08 am
Forum: General
Topic: Why I can't log on winbox after reinstalled the windows OS?
Replies: 7
Views: 4481

Re: Why I can't log on winbox after reinstalled the windows OS?

:) You have to either enter the IP address by hand, or click on the [...] button to auto-find the IP! http://wiki.mikrotik.com/wiki/First_time_startup haha,normis, long time no see, how are you? But in the old days, I remembered that it can detect automaticlly, Why it can't now? I want to know wher...
by Michael12345
Thu Dec 03, 2009 10:47 am
Forum: General
Topic: Why I can't log on winbox after reinstalled the windows OS?
Replies: 7
Views: 4481

Why I can't log on winbox after reinstalled the windows OS?

After I reinstalled the windows-XP OS of a workstation in Lan, I can't log on winbox, its prompting shown like following picture. I recently have done two actions that I concerned that maybe causing this. 1. I had set "drop" input chain in "firewall-filter" few weeks before; but ...
by Michael12345
Wed Dec 02, 2009 3:39 am
Forum: General
Topic: How to sever workstation from each other?
Replies: 5
Views: 1505

Re: How to sever workstation from each other?

1. In few days before,I considered that the communication between two workstations in the same ethernet would pass through "input" chain, but you said that is not true, then What kind of traffic flow would pass through "input" chain? 2. "input = traffic destined for the rout...
by Michael12345
Tue Dec 01, 2009 5:49 pm
Forum: General
Topic: How to sever workstation from each other?
Replies: 5
Views: 1505

Re: How to sever workstation from each other?

What is the concept of "input" and "forward"? I much don't understand the concept of "forward".according to some references said that "forward" means packets which came from internet going in to the router, but these packets are not intended to go into the any...
by Michael12345
Tue Dec 01, 2009 2:38 pm
Forum: General
Topic: How to sever workstation from each other?
Replies: 5
Views: 1505

How to sever workstation from each other?

The following picture is my topology of network. 1. When I copied a file form a station to another station, the traffic flow display in the diagram of "interface-ether1" and "interface-ether2" is nothing change ,the transport rate display in the "local connection" is up...
by Michael12345
Sun Nov 22, 2009 5:27 pm
Forum: General
Topic: How to code a script to power-off or power-on a server?
Replies: 5
Views: 5006

How to code a script to power-off or power-on a server?

Is it possible that there is a script which can accomplish the following function---- 1.When Mikrotik detected that there is no station on line in the midnight, shutdown automaticlly; 2.When there is one or above one station on line, it would power automaticlly. By the way, there are two question. Q...
by Michael12345
Sun Nov 22, 2009 5:47 am
Forum: General
Topic: What is the meaning of it?
Replies: 3
Views: 2416

Re: What is the meaning of it?

thanks
by Michael12345
Sun Nov 22, 2009 5:33 am
Forum: General
Topic: How to display the exact minute of "log"---first column?
Replies: 4
Views: 1525

Re: How to display the exact minute of "log"---first column?

What RouterOS are you using?

Can you do it from CLI?
/log print
-Louis
What is the CLI? I used v3.6.
by Michael12345
Sun Nov 22, 2009 4:29 am
Forum: General
Topic: How to display the exact minute of "log"---first column?
Replies: 4
Views: 1525

How to display the exact minute of "log"---first column?

You can see in the picture1, I can tell the precise minute of every entry in "log".
by Michael12345
Sat Nov 21, 2009 5:46 pm
Forum: General
Topic: What is the meaning of it?
Replies: 3
Views: 2416

What is the meaning of it?

The episode shown in picture_1 was extracted from "Scripting Mikrotik WiKi" about the usage of "find" command. I really want to know what is the exact meaning of the last figure "-1".Minus one? or dash one? I have try to "+3" or "-5", but result seem...
by Michael12345
Sun Nov 15, 2009 9:08 am
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Re: Several questions need to concern

Upgrade to proper 4.2 instead of the 4.0 beta 1 a screenshot in your other thread shows you running. The behavior you're seeing could be due to you using a beta.
Thank you for reminding.
by Michael12345
Sun Nov 15, 2009 5:08 am
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Re: Several questions need to concern

I have done it according your guidance,but nothing change as before.see the following picture.
Is it arose by hardware? When I installed , nothing wrong hint shown.But I did't install the "XEN" package. Does it matter?
by Michael12345
Sun Nov 15, 2009 4:59 am
Forum: General
Topic: Is there any extra use for unlooked-for dynamic ip address?
Replies: 3
Views: 2653

Re: Is there any extra use for unlooked-for dynamic ip address?

Where can I find the "pcc" option? I can't find the "pcc" in my v4.02,there isn't in "firewall"--->"mangle".
by Michael12345
Sat Nov 14, 2009 6:05 pm
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Re: Several questions need to concern

what does '/ip firewall layer7-protocol print' say?
only one entry has been imported.
by Michael12345
Sat Nov 14, 2009 5:58 pm
Forum: General
Topic: Is there any extra use for unlooked-for dynamic ip address?
Replies: 3
Views: 2653

Is there any extra use for unlooked-for dynamic ip address?

I am a subscriber of 2M adsl, and it happened that I recently found Mikrotik can dialed more than once by pppoe client.I created three pppoe client, dialed and hence got three several dynamic ip address successfully likes what shown in picture 1. But when I downloaded,it seems only one "pppoe-o...
by Michael12345
Sat Nov 14, 2009 3:44 pm
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Re: Several questions need to concern

but in fact it have noting in it. where do you see that?.. I see it in "fire-wall", "Layer7-protocols", only one entry can be imported, then reported "already have....",but there is nothing but one entry show in "fire-wall"---->"Layer7 protocols".
by Michael12345
Fri Nov 13, 2009 5:24 pm
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Re: Several questions need to concern

it was 4.2. what exactly do you see while executing 'import l7-protos.rsc'?
It can't import the script.It report "already have....",but in fact it have noting in it.
by Michael12345
Fri Nov 13, 2009 9:32 am
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Re: Several questions need to concern

[admin@MikroTik] > import l7-protos.rsc Opening script file l7-protos.rsc Script file loaded and executed successfully [admin@MikroTik] > Would you like to import with v4.02 for me? I just only have v4.02, and I really want to know whether it is the bug of v4.02 or whether I have done it wrong in s...
by Michael12345
Thu Nov 12, 2009 5:32 pm
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Re: Several questions need to concern

1. it's hard to answer many questions in a heap. please create one topic per question - it's much easier to concentrate on the problem, and you are sure that nothing will be missed 2. I added "mark-connection" with 'src-mac-address' in prerouting chain of mangle. all is working for me - c...
by Michael12345
Thu Nov 12, 2009 3:23 am
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Re: Several questions need to concern

next time, please, do not answer several questions in one topic :? answer two: all is working for me answer three: press 'save' button answer four: yes, seems like a bug 1. May I ask the reason that you "do not answer more than one question in one topic"? 2.What is meaning of answer two? ...
by Michael12345
Wed Nov 11, 2009 4:26 pm
Forum: General
Topic: Several questions need to concern
Replies: 19
Views: 3653

Several questions need to concern

Question one: Version4.02 can't import script to Layer7-protocol. The topic I posted few weeks before(http://forum.mikrotik.com/viewtopic.php?f=1&t=36223),now I have confirmed that version4.02 really can't import the Layer7.rsc script,the key point consists in command "find".Now I impo...
by Michael12345
Tue Nov 03, 2009 10:09 am
Forum: General
Topic: why so many "established connection" in.....................
Replies: 3
Views: 2731

Re: why so many "established connection" in.....................

What exact meaning of mine is how to cut off these vast useless "established connection"? Because at the moment I token the upper picture,I only have one computer in this Lan(means no other computers which belong this Lan are communicating with the outside internet), and I have closed all...
by Michael12345
Mon Nov 02, 2009 6:03 pm
Forum: General
Topic: why so many "established connection" in.....................
Replies: 3
Views: 2731

why so many "established connection" in.....................

Question one: I have been confusing with "output", "input" and "forward"... I am a green hand in Ros, and I have referred few references, but still can not make clear about the concept of "output","input" and "forward"... In my view that &q...
by Michael12345
Fri Oct 30, 2009 10:34 am
Forum: General
Topic: What's wrong with my Layer7.rsc?
Replies: 2
Views: 1864

Re: What's wrong with my Layer7.rsc?

I tried to act according to your guidance,but it still as of old. It seems something wrong with the command "find", whatever parameter I inputted, the command "find" just only "find" the first entry. But I did learn that someone else use this "Layer7.rsc" can ...
by Michael12345
Thu Oct 29, 2009 5:28 pm
Forum: General
Topic: What's wrong with my Layer7.rsc?
Replies: 2
Views: 1864

What's wrong with my Layer7.rsc?

Question One: Picture 1. is Layer7.rsc which I downloaded form internet,is it correct to use? Picture 2. When I import the script of Layer7.rsc in "Terminal", it just only import one entry,just merely import the first entry-"edonkey", and then report "already have....",...
by Michael12345
Thu Oct 29, 2009 3:15 pm
Forum: General
Topic: Who would kindly give me a Layer7_protocol.rsc for Version4?
Replies: 5
Views: 1622

Re: Who would kindly give me a Layer7_protocol.rsc for Version4?

If you don't like colors you can disable it with +c option
http://wiki.mikrotik.com/wiki/Console_l ... in_options

Nothing is changed in L7 between v3 and v4.
Am I right to login like the picture below? But it can change the color.
by Michael12345
Thu Oct 29, 2009 9:21 am
Forum: General
Topic: Who would kindly give me a Layer7_protocol.rsc for Version4?
Replies: 5
Views: 1622

Re: Who would kindly give me a Layer7_protocol.rsc for Version4?

by the way , how to change the color of character in "Terminal" programming? Because I don't want to change the desk-color of windows. Some words in the "Terminal" screen look rather ambiguous, wear-out my eyes just in few minutes.
by Michael12345
Thu Oct 29, 2009 7:48 am
Forum: General
Topic: Who would kindly give me a Layer7_protocol.rsc for Version4?
Replies: 5
Views: 1622

Who would kindly give me a Layer7_protocol.rsc for Version4?

The former usual Layer7_protocol.rsc seems unworkable in version4.x, who has the experiences about this and tell me how to do? or has a Layer7_protocol suitable for version4.x send to me? or I have to mend the syntax in the old Layer7_protocol script line by line? Thanks
by Michael12345
Wed Oct 28, 2009 4:26 pm
Forum: General
Topic: v4.2版本还是没有解决LCD显示设置丢失的问题
Replies: 12
Views: 8520

Re: v4.2版本还是没有解决LCD显示设置丢失的问题

We know about issue with LCD. We are trying to fix it. Thank you for writing.
The following chinese is I take the liberty of interpreting for normis.

我们知道LCD还不完善,正在解决中,谢谢你的提议。
by Michael12345
Wed Oct 28, 2009 3:57 pm
Forum: General
Topic: Ros4.02bet verson set a variable can't work?
Replies: 5
Views: 1551

Re: Ros4.02bet verson set a variable can't work?

Thanks very much. But it seems can work in version2.927. the change between version2.9 and 4.X is a lot.
by Michael12345
Wed Oct 28, 2009 3:30 pm
Forum: General
Topic: v4.2版本还是没有解决LCD显示设置丢失的问题
Replies: 12
Views: 8520

Re: v4.2版本还是没有解决LCD显示设置丢失的问题

Let me try to interprete for the questioner. The title is "The bug in LCD's display-setting does not fix yet in Version 4.2" Content:I have used version4.1 and version4.2,they both have the same bug in it. The bug is that in LCD display the setting data of network-car will lost(vanish,disa...
by Michael12345
Wed Oct 28, 2009 3:04 pm
Forum: General
Topic: Ros4.02bet verson set a variable can't work?
Replies: 5
Views: 1551

Re: Ros4.02bet verson set a variable can't work?

I have declared,but it remained,It seems like a bug , and i have tangled it two days! /Who can tell me why ??? Did anybody ever encounter it before ?
by Michael12345
Wed Oct 28, 2009 9:04 am
Forum: General
Topic: v4.2版本还是没有解决LCD显示设置丢失的问题
Replies: 12
Views: 8520

Re: v4.2版本还是没有解决LCD显示设置丢失的问题

你在这里发中文,会有人懂吗?呵呵。。。我第一次来,请多多指教。
by Michael12345
Wed Oct 28, 2009 9:02 am
Forum: General
Topic: Ros4.02bet verson set a variable can't work?
Replies: 5
Views: 1551

Ros4.02bet verson set a variable can't work?

like this: if I type ":set i 50" in the teiminal as usual previous verson, the variable "i" become to display brown, means error. No matter what i have tried ,it can''t work, why ? Who can tell me how to set a variable in verson 4.02? Thanks a lot.