in most cases problem is somewhere else in the network. same vlan bridged with same ethernet network maybe? without RSTP? protocol-mode=rstp bridge contains 1 ethernet and 1 vlan from other ethernet my router contains total 3 bridges fyi, i didn't make any configuration changes, while this router u...

Hi Everyone, Just updated my RB1100AH from 5.26 to 6.33.1 yesterday, everything looks just fine but i found the log reporting many warning 19:46:03 interface,warning ether7: bridge port received packet with own address as source address (00:0c:42:eb:0a:05), probably loop 19:46:10 interface,warning e...

i use this to mangle proxy cache and then make simple queue to give higher speed for proxy cache add chain=postrouting content="X-Cache: HIT" action=mark-connection new-connection-mark=proxy-con passthrough=yes comment="HIT proxy" disabled=no add chain=postrouting content="X...

have you try to enable "always from cache" on web-proxy ? and about squid you can put it as a bridge or same level with Mikrotik or your local... for your multiple port, you can simply dst-nat them going to squid ip:port and make your squid transparent or you can use web-proxy to forward y...

Please anyone help me how to block acces from ultrasurf ???
it's use https/443 and tons of IP's so it almost impossible to filter it's IP's
maybe someone can figure out this or maybe using layer7
thanks in advance

thanks Butche...
now i understand how it work and how it can't work with the upload trafic...
my case is i have very small upload bandwidth from DSL and i have another subscription for a high upload bandwith...
any idea how to manipulate it's route or at least to improve my network performance ???

Thanks for your fewi
i already use trafic priority espessialy with heavy trafic....
it seem's that my thread is just a dream in Mikrotik...hope the Mikrotik's team will make it possible

What do you mean by 'upload traffic'? Thanks for your respon... what i mean is to routing all upload from local to 1 interface that goes to 1 ISP... i have 3 DSL connection with 1024Kbps downstream and 128Kbps Upstream for each line... and i have another 1 WISP with 1024Kbps Downstream and Upstream...

Please someone help me with my case...

Nice work ...
Thank you so much for the good work you've done

Dear All... i'm quite new on Mikrotik... now i have a RB450 with ROS 3.21 what i wanna do is to loadbalancing(NTH) from 3 DSL with PPPoE dial on RB450 en set all upload trafic to one interface that goes to another ISP (wireless). Anyone could give me a simple word to make it possible ??? here are th...

why don't you try to use external proxy instead of internal proxy from Mikrotik ?
when i use ROS v.2xx it's internal proxy work great... but after using v.3.xx i prefer to use squid on external proxy... work better for me especialy if you want to mark "X-cache: HIT"