MikroTik

rickard

I think its a cool product and we will test it the price is right.

rickard

Yes i run in ptmpt and we have ros 5.11 om cpe and now 5.20 rc1 in AP
//rickard

rickard

Hello. We have still problems on P2MP links. It is 802.11N with NV2 clients who have ROS 5.9 are most stable then clients with 5.19. Any client when is downgraded to 5.9 - then have good uptime and little disconnect. With 5.18 and 5.19 a lot of problems with disconnect :( Have anybody the same prob...

rickard

Hi i have download the v5.20 RC1 and now test it with RB433 ,RB411 ,RB 532, RB511, RB112, RB133c and gues what

NV2 works

now my uptime on some test sites
the CPE units have benup for 10 Hrs ! that is amazing

befor is was 2-10 minutes..

//Rickard

rickard

Hopfully in the mum in poland

rickard

Yes we need this product i will bying alot of them.

rickard

Yes u can fix it! look att the capacitors! if their heds have a bulb on it then remove it ant solder a new one in.

rickard

Hi All

Try this antennas! they have 53 Db isolation betveen H & V pol!!http://en.jirous.com/antenna-5ghz/jrc-29-duplex
We will be starting to sell this unit soon.

rickard

Hi!

Wher do you get the combiner from ? and yes if the combiner is ok then it will work.

rickard

Yes , Thats true, we are now using only the System, Routerboard, wireless and the DHCP pakages. then it works , we even disable the BT test server and SNMP server.
after that we have 4.2 Mb ram left in system memmory.

//Rickard

rickard

Inox>> Yes i know to test on a few CPE units first i always do that, But her is the problem, the ones we tested on was working...not fast , but it was working , The scary part is the RB112 cards they go dead if you are unlucky, thats the problem , we will be bringing a few of this broken cards to th...

rickard

Hi all Ok, but Mikrotik was delivering the RB133 cards with 3.x on it .... and yes i know the cards are low on CPU and memmory but hey they have to get it to work, But i have now have the cards running with 3.19 for 8 -10 days know with no hassel at all, and we can delivery around 8 Mbits to the cus...

rickard

We will now use our tool for puting out scripts on our 200 CPE units that are failing now..
with the above changes. and i hope it will fix the problems.
Stay tuned
//Rickard

rickard

Some more findings ... and now we have 4.1 Mb ram for use :-) Now we are using only this packages: 2 system 3.19 5 wireless 3.19 6 routerboard 3.19 7 routeros-mipsle 3.19 10 dhcp 3.19 And we disable folowing services: SNMP www under IP services Logging services Btest server I hope this will fix our ...

rickard

Yes we used th Dude 3.1 to uppgrade.... i will be posting the Export if i sucess to export it... we have also updated the Bios on the RB 113c and the RB112 to lates version.... Finaly i get out the Export conf. it took 10 min to get it via SSH... XXXXXXX = removed IP and email adresses. # jan/27/200...

rickard

some more info about our settings... we ar using this Packages: 2 system 3.19 3 security 3.19 5 wireless 3.19 6 routerboard 3.19 7 routeros-mipsle 3.19 10 dhcp 3.19 The Export from the CPE is impossible to do its disconects...and reboots..the memory get to low... //Rickard

rickard

We have upgraded from 2.9.51 to 3.19 on our 200 CPE units and now we are in a living hell!. the CPE is stoping some ports like port 25 and so on the only that are working is port 80 ? and this is happing after 4 days the cpu is on 100% and the only solution is to Reboot , its becoming a Dlink :-( So...

rickard

Wy dont buy a Supermicro Box ? its working verry good
//Rickard

rickard

Hi!

Check the AC adapter if the voltage drops , im using only (now) 48 Volt 7 Amps or 24 volt 12 amps, and i newer have problems with drop outs. you can check if you lower the output from the radio cards ,then it probably not disconect.

//Rickard

rickard

Hi nick. Check this version http://www.rbcom.se/Assets/mtik/picture%20011.jpg Its made of Stainless steel and it light weight and werry strong.it have survive a hurricane :-) The other version is made of standard parabolic pipes. 50 mm 2.5 mm thick. and its velded togheter. and it light weight. the ...

rickard

I did a downgrade to 3.0 again and the problem with no traffic was still there ,and tha strange thing was when i was going in to the DNS server and did an apply with the old settings the traffic start to move again.... And before that i was rebooting the RB532 3 times with no sucess.. So it is somth...

rickard

Yes i was updating a RB112 that have 3.0 on it to the 3.1 and its now gone

so the customer is on the way to pic up a new unit.
So i have to check what gone wrong...this time.

rickard

Hi

We can report that the 3.0 did the same, But! update the Bios on the RB532 then it works.

//Rickard

rickard

The antennas is Steeladoradus 15 db 2,4 ghz 90 Degree... And that picture is on a silo :-) , but we use the same setup on towers that are 40 meter but the big tube is 2 inch and the smal is 1,5 inch ... and yes i think it moves in the wind, but hey it have ben working now for 3,5 years! without fail...

rickard

Hi Mperdue Check the picture i provide here : http://www.rbcom.se/explorer/installationsbilder/stor04.jpg This is how we do it on 25 towers. If we have 4 sectors 90 Degree we keep them apart for 1 meter, we have this setup in the top of each tower that we own. And we use always 1 routerbord with 1 R...

rickard

We use Fiber 100Mbits today for 450 customers ,We have a AS:nr with RIPE and we can alocate 8000 Ip nr:s to our BGP router, And we use MT 5 ghz for backbone and 2,4 Ghz for CPE.

//Rickard

rickard

Hi Normis, We found the solution with bad trhuput in the VPN conections. It was in the BGP router side. When we removed the MT router and put in a JP2320 then the problem was gone. So it must be related to the BGP . we have 30 Psc of MT routers that are working well now. and the Speed is up again in...

rickard

Hi,
We using 2.9.48 today on a P4 2.5 Ghz celeron with 512 Mb ram and we are pusching 50 mbits today with cpu usage 35 %. And we have alot with TOS Marks and Ques enabled.
And we have 450 Users running. Works great!

//Rickard

rickard

Hi
The graph looks kind of odd the signal goes from -58 to -45 db ? that a lot for a solid PtP link
Put on Nstream on it, for the ACK and Polling, and the dip you have down to -85 db is strange.
looks like a big inteferens at that time . is it samte time every night ?

//Rickard

rickard

Hi

Use two diffrent SSID like "AP16" and "AP17"

//Rickard

rickard

Hi All,

In sweden we us this program http://www.tptest.se the TPtest program is the "Standard" for every ISP her. The only thing we do is to put up a own TPtest server, on our network , And its free and it works

And yes the users are not so bright everytime...

//Rickard

rickard

Why don try RF over Fiber ?? then you can have cabel runns like 1 km

try to Google for RF over Fiber,

//Rickard

rickard

Yes i now

but wher in Europe ?

try this http://www.wibe.se/Default.asp?LangID=2
or http://www.vargardaradio.se/

I have ben using both for towers up to 30 meters,

//Rickard

rickard

Wher is the change log ???

//Rickard

rickard

Hi Kiira

If you use the MMCX connector the right setting for that is antenna-mode=ant-b
its like that on the SR5 anyway...the default is for the UFL conector...

//Rickard

rickard

Wow thats Respect to you guys! kepp posting about the transfer rate in TCP mode.
And pleas tell me about the Feeder used in this setup.

//Rickard

rickard

Hi Ejansson

I will look in to that, can you give me more info off topic?
to rickard (AT) rbcom.se

//Rickard

rickard

Hi i will have a up/down converter ready soon

from 5ghz to 10 ghz.
and i have a custom build combiner /diplexer for 4 diffrent transmitters to one antenna! this is for the 5-6 ghz band. the chanel separation is around 26-30 db. so i hope it will work.

//Rickard

rickard

Hi ccrum, Intresting about your test with circulators, in a few weeks i will try my new manufactured Combiner for the band 5.4 -5.8 Ghz with 4 input/output to one antenna :-) its a another company that will build this for me . it have 25 db isolation betwen the inputs. and i hope it will work. I don...

rickard

Question

have some one tryed Green laser to align antennas ?
i will try my 35 mw green laser some night and se if it possible to use that

//Rickard

rickard

Ok Then you have Big problems with the cabels or antennas or the SR5 cards. it totaly impossible to get that low signal that you get . i was checking my link now that are 8 km LOS with r52 at 5ghz and with solid parbolic 25 dbi on both sides the signal now is -49-51 db. and i have 5 m coax on each e...

rickard

The ping time is 7ms - 27ms on the AP-CPE side2,4 Ghz G mode only nstream, no compression). And PtP-PtP (5ghz with Nstream with Exactsize no compression ) is 1ms-2 ms links are all from 2km-24km no diffrent in ping. I have diffrent speed to my customer side for TX-RX ,all from 0.5 Mbits -8 Mbits dep...

rickard

Removed

rickard

Remove

rickard

Hi!

Im using Nstream in my PtMP with 2.4 ghz band. only G mode,
I have today 19 towers and 300 CPE units (RB112) working God!.
The customers ar running VoIP , and it working well, Im using OSPF
with router-test.Npk ,

We are delivering max 8 mbits Tx/Rx to the customers.

//Rickard

rickard

Ok , The Noice readings ? or the SNR value.
have you tryed diffrent freq?. try with Turbo mode (40Mhz chanels)

//Rickard

rickard

Hi Tisho, Intresting case you have i have a simalary problem :-( i have 4 cards in one P4 PC, That works perfect with noise -101-105 db all in 5ghz band... But my second PC that are identical with the other one that i have noice -92-96 and the bandwith is bad. i wondering if it have somthing with th...

rickard

Hi!

Thirst thing do you have LOS ??
Your hardware will give you more then -68 in signal!
I have a link 10 km with 2 parabolic 25 dbi and r52 cards and 5 meter 1/2" Andrew cables, my signal is -49-52 db ! and im running 25 mbits without turbo mode on it.
with rb532 boxes...

//Rickard

rickard

I have a big problem with the Dude 2.1 and Dude 2.2 I use OSPF in the network with the router test NPK. So when i monitor the network all working fine :-) BUT when i will check a router with Winbox the router lose its route:s!!!?? so i have to reboot it :-( the the OSPF com back working again. This ...

rickard

We have make one utility that can handel unlimeted of host in PHP webpage

I can paste in CLI commands to all my CPE units .
to change 300 units takes 1 hour i think.
And it works for all kind of equipment

//Rickard

rickard

Du you have API to the Dude ?
//Rickard

rickard

I need to put out scripts to all my devices like CLI commands .
today i have a Telnet apps that can handel 500 hosts . but have it in the dude will be awsome

//Rickard

rickard

Yes you can use a upconverter to a standard 5 ghz card.
I will try this to but for the 10 ghz range .
But i thing you have to built all the gear by your self or check this site they can help you out http://www.procom-dk.com/ they built feeders and parabolics osv..

//Rickard

rickard

Today i was testing Beta5 on my RB511 AP-Bridge 2.4 Ghz G only mode and with OSPF enable,with 8 customers on. And i did work great for 20 min then fail, and need reset to come up again, I use Nstream with CDMA Off. The AP was answering pings but no more. This is the same behavior like Beta 3 //Rickard

rickard

You can change the firmware in the Turbocell CPE to work wit standard WiFi, I have a lot of the old KN50 CPE , and im trying to put in the CB3 firmware on it

so then i can use it anyway

.
//Rickard

rickard

Hi!

The speed you get is not Ok im running 10 mile (16KM) links with Nstream ON, and i have 20 -25 Mbits

with R532 and that is on GN-WI01HT (R52 equal) radio, with 26 Dbi grids, and the signal is -58- -62 db, And yes ve are running VoIP calls to

//Rickard

rickard

Intresting subject :-) I have big problems with my antennas, for my PtP links ,so i did a crasy thing. I did take a Stella Doradus feeder and i put it in a IKEA :-) metal Bowln :-) and guees what! i did get a perfect antenna :-) i have 24-26 dbi compered to a solid parabolic. But i did get rid of th...

rickard

Hi David, Im running almost 300 clients in G mode only :-) all the client ar spreaded in diffrent towers ,but in the city we are using H-pol antennas only,this is for all the vertikal inteferens from home AP. But i have seen similar problems like you have , but the i switched over to G mode 10 Mhz m...

rickard

Hi I do have the same problems her to :-( i have 8 users on a RB532 and this is on one sector of 4 , i have tryed every chanel but no luck i have switch the antenna and coax and the radio card.... the only thing left is the RB532 card... the speed on that sector is max 512 kb to 1 mbits... the otehe...

rickard

We tryed this CSMA/CA backoff option tonight in production :-) it was on a RB532 with 15 users. And it gave us litel improvment but i dont know if u have to have it on both AP and CPE ? we had it only on AP side... The big problem was that it was only working for 20 min then it stops working... ping...

rickard

My solution to a similary problem was.

Go down to 12-18 volt on the RB532 and power direct from a car battery with an old battery charger without switching tech.
Then it will work. I was disturbing the VHF band in sweden. for a cabel tv company

//Rickard

rickard

Hi all her is some of my instalations in Sweden:
//Rickard
At what frequency are the four (4) presumably 90 degree sectors operating?

rgds/ldv

Its on 2,4 Ghz and the channels are 2412, 2437, 2462, 2472
And it have ben working now for 2 years

,

//Rickard

rickard

Hi all her is some of my instalations in Sweden:

Our Main Tower

On A silo

Close up

//Rickard

rickard

Hi

Are you sure that you have the right antenna port ?
do a default setup and do a scan from your client,
i have the same setup like you and it works .

//Rickard

rickard

Hi all :-) i have to put in som info her ... 3 Meter Grids!! that are 9 Ft ,that will be arund 60-65 Dbi Gain!. And sure running H-pol in 5-6 Ghz over water is OK. We are running 42 km over water with 26 dbi grid and the speed is 55 Mbits TCP real speed :-). //Rickard 12' dishes are only 45dB of ga...

rickard

Hi, Try to put in 52 to 56 Us in the AP , and try to lower the Default data rates to like 24 mbit. and se if it will fix the ping.

rickard

Hi! Check your settings on Antenna gain !,you have put in this "antenna-gain=53" !!! that totaly wrong! put in 0 then stuff starts to working :-) Or to a reset of your client CPE and start all over with default settings. This is my setting on one Ap for 5 Ghz. check my settings on Antenna ...

rickard

Hi, We are running a 24 km PtP link with 26 dbi grid H-pol over a city and water. we get on R52 cards a signal -70/-72 db and we get today with R532 15-18 Mbits TCP. and we dont have clear fresnel zone.

//Rickard

rickard

I think i now the problem :-) try to get 2 pcs of new Radio cards. it sound that you have broken diversity chips on your cards. i have hade that problem like 100 times now :-( . and it depends on the verry ESD sensivity CMOS chips, that get blown. //Rickard PS Im using that antenna that u are using ...

rickard

Yes we have this problem to. and to resolve it is to get a own DNS server.
The MT dns cant handel CNAME corectly and other problems.
i hope they update that code soon .
//Rickard

rickard

Hi all

i have to put in som info her ...
3 Meter Grids!! that are 9 Ft ,that will be arund 60-65 Dbi Gain!.
And sure running H-pol in 5-6 Ghz over water is OK.
We are running 42 km over water with 26 dbi grid and the speed is 55 Mbits TCP real speed

.

//Rickard

rickard

Hi there, thanks for your reply. My vendor Miro also accepted the problem. I need to change all cards now. Can you suggest which card is best for 2.4 and 5.8 ? ( The question is relevent - as we are facing too much problems of senao cards.. and really do not know why the same chipset from different...

rickard

guys I want a gain to note that it is not working . We can't get signal .

to rickard;

Is it possible that four RB532 router's card broken ?

:?

Yes is possible , we had a towet that blow away all 5 radio cards in sector antennas,

//Rickard

rickard

I all. we are having the same problem her in Sweden... but . we rebuilt the antennas with better grounding, that helps some times. and i reparing the radiocards by removing the Diversity switch in the cards. then the cards working perfect again :-) so pleas do not throw the cards in the trasch cans!...

rickard

i have the solution for you

Switch to a new Radio card. You have a broken antenna switch in the R52 card.
I have now in 2 months have sent back 35 pcs of the r52 card with broken antenna switch on.

//Rickard

rickard

i have the solution for you

Switch to a new Radio card. You have a broken antenna switch in the R52 card.
I have now in 2 months have sent back 35 pcs of the r52 card with broken antenna switch on.

//Rickard

rickard

Yes it works great

we have a 22 km link with 26 dbi grid on each side.
with the Gigabyte cards and the signal is -73.

//Rickard

rickard

Hi

is it standard CM9 cards or R52 cards from MT ?
//Rickard

rickard

Hi we had a strange problem.. we have upgrade our Main GW to 2.9.20 and i worked ok for 24 H but today it stop responding on http sites like Google (werrry slow) and Mikrotik.com did not show up at all:-).but Mikrotik.lv worked... but when upgrading to 2.9.21 then everting start working again....:-)...

rickard

Mee too

i have no bugs att all ....

rickard

I think the 2.9.20 is the most stable relase this year

. I have upgrade 30Ptp links and 30 Ap cells. and everything is running perfect

and tomorow i will uppgrade 150 CPE units to 2.9.20

//Rickard

rickard

>>Hammy

Try uppdate to 2.9.20 it solved my problem with disconects with -75 db,
now i have a stabel connection

//Rickard

rickard

HI All. We have made a custom Apps that are pretty cool :-) that uses both SNMP and Telnet. And we are showing the Signal with a grapich bar red,yellow,green for the signal strenght. and you can set the SSID for diffrent base stations... and soon we can let the Customers Scan and then connect. and t...

rickard

Hi All,

I have 3 of the Sangoma S5141 cards if someone needs it

pleas email me on rickard@rbcom.se

//Rickard

rickard

>>sergejs

I havent tryed yet

, Its not so fun to reroll all the uppgrades in my network. We had alot of angry customers running with VPN to thier work.
But i solved it with 2.9.17. so i stay ther for a while

.

rickard

>>airnet

We had the same problem with windows VPN(PPTP) but the 2.9.17 works.
I have tryed all MT versions from 2.9.10 (that works to) the other ones have the same problem. All works with the MT PPTP client/server.
but not with Windows.

//Rickard

rickard

I Think you will get at least 3-4 km distance. But if you have -76 in noise something is wrong!. i get at the maximum -92 ! and then i have 3 diffrent GSM and 3 G tellcos 4-5 meters away :-) and a 2.4 Ghz WISP ... but they ar running on V-Pol and im running on H-pol sectors 13 dbi.... So check your ...

rickard

OID (SNMP) support for station mode on the wierless status page .
that will be very nice

So i can read out Noice and SNR for my clients.

//Rickard

rickard

//Matt

Try to change your manual Tx power setting to default or to 21.
and put Periodic calibration to Enabled.
And update to 2.9.13 then u use the new Wierless drivers.

//Rickard

rickard

My wish list:

- LM Sensor (Working temp volts on standart Intel MB)
- Dual CPU suport that will be nice (then i can make use of Dual core)
- API for the Winbox

so we dont to have make C++ programs all the time. and use Telnet...
-More UPS support like APC, Thrust, Belkin,...

//Rickard

rickard

I need it to

or my customers need it.

//Rickard

rickard

Yes it will be perfect solution. and when i get my own designed antenna that can handel Both 2.4 ghz 19 dbi and 5.4-5-5.8 ghz 24 dbi in the same antenna

, its in development state right now. Then i only have to change the a or b setting on the R52 card.

//Rickard

rickard

The main diffrent that im found is that the R52 is sensitive compared to the CM9 . And its handeling the Noise verry good.
We are running on 5.4 Ghz with 26 Dbi Grid antenna and the distance is 10 Km with signal -54/-58. and real trafic is ~ 25 mbits.

//Rickard

rickard

Yes 150 users on lots of RB500 Ap cells :-) the maximum user per AP is 20 users.

//Rickard

rickard

I hope is not avaibly yet

i have my chipment with 100 Pcs of the RB511 comming this week and its more expensive.
at the MUM they dind think it will be redy for large order until late mars or april or ?

//Rickard

rickard

I use the (R52) 802.11a+b+g 65 mW Wireless miniPCI Card and it work like a charm :-) i have it today on 150 customers CPE units. I have tested the SENAO 100 mv card called ARIES2 and i working well but its more sensitive to noise compared to the R52 card. This is from the Mikrotik site : MikroTik pr...

rickard

I need support for Mobile Telemetry standard EN 300 674 -2-1 on the 5795-5805 Ghz in sweden. with 5 Mhz chanels. then i can use 2 Watt

EiRP.

And full support for Hiperlan 2 standard ETS 300 836-1 5.4-5.7 Ghz 1 Watt EiRP, With DFS and TP working

.

//Rickard

rickard

I hope they will include support for Intel motherboard temp readings

that will be nice.

rickard

It working werry well

i have uppgrading 30 ap with the wireless test.npk and it have been working without failure

And the signal is better and the speed. and if im using the MT radio card
i have SNR and noise readings.

//Rickard

rickard

Hi Jobber.

Check this : http://www.mikrotik.com/Documentation/wireless_test.pdf

//Rickard

rickard

I was there

But i hope next time to se more hardware from other vendors. And a presentation of the Mikrotik team

They missed that

. But i was nice to be there.

//Rickard

rickard

I wonder how they did becourse its not supported by Atheros ??.
but it seems to work

. im running 2.9.11 Wireless test in my production network

and it still works fine.
And the Noise floor is -95 Dbm... and the cpu load is lower...

rickard

Hi Michael, I think you have problems with your cabels or antennas. Im running 10 Km link with 2 pcs of RB532 Level 4 licens. And with Atheros CM9 cards and the antennas are Grid antennas 26 Dbi. the signal is -58 and i can lock the MT on 56 Mbit. And the ping time is 1-2 ms. And if i try the same l...

rickard

Hi All,

I have a link on 8 Km and im using 26 Dbi Grids and CM9 card but my signal is -48 --50 dbm :-) with Nstream and it working verry god.

//Rickard

rickard

Hi All,

I know a fix :-) try to disable the Periodic Calibration under the Advance tab.
It gets better but not good.

//Rickard

rickard

I have update my all AP RB532 and that working fine.
and my other X86 verions working fine to

And finaly it dont disconect the users on AP anymore !! (beefore is was every 10 sek)

Good work!

//Rickard

rickard

Nice!

We will be there

2 persons from Sweden.

//Rickard

rickard

Nice it working verry good the 2.9 release :-)
i have uppdated in production 5 PtP links and 4 AP cells. working verry god. and the ping time is around 2-3 ms on a 10 Km PtP link with -73 dbm in signal and 24 Mbits.

//Rickard

rickard

Im sorry yes it will work on one MT box but i dont whant to have the main router and the proxy on the same box. We have 2 main routers with fail over and one proxy server.

//Rickard

rickard

rickard

This is my settings. we are running Hotspot on 192.168.254.1 on port 80 and the proxy is on IP 192.168.254.4 and port 8080. And this setting works for like Http downloads from Microsoft etc.. ******On the Main GW MT Router***** / ip firewall dst-nat add src-address=192.168.0.0/16 in-interface=Ether2...

rickard

Yes it works... we do that on our system but i dont think MT support 2 drives. i use one 120 Gb SATA disk , and that work.
from the Main router we use transparent proxy with parentproxy, to a second box with proxy enabled.

rickard

Hi

Use the Hotspot features :-) then you can fix the login page if you whant.

//Rickard

rickard

Hi Jon. I have been updating from RC2 to RC7 on my all RB532 units with no problem att all. The only thing i have is one of the units that will not run more than 266 Mhz , so the safe CPU Setting is to high in the RC7 (333Mhz).So when i was updating the bios an i did a power cycle the unit faild. //...

rickard

Hi

Im running 2.4 Ghz G links for 4 Km . But im using Nstream.

rickard

Yes it will work if you use the G band only, and if you whant, you can use WDS with more AP cells to get more coverage.

rickard

Hi Stefan

It works for me ... i have that setup to. Try the new Wierless.NPK file.
then you have more speed.

rickard

Hi Stephen,

The RC7 Works like a lightning with the special wierless npk file !.
test it :-)

rickard

I will try soon as possible to use air to air heat exchanger with 2 fans. then the box will be air tight. The Telco peopel use that in thier boxes... Im using in my new test box a mobil cpu with 1.5 Ghz and a MB with Mini pci and flash socket. and 10/100/1000 Lan . and the best of all DC 12-19 Volt ...

rickard

RC5 working fine :-) still...

rickard

Stephen: Do you have a god solution about the cooling ?? im trying to use Heatpipes and passive coolers , i have even tryed Solide state cooler but it still works best with Fans :-) and a metall box. se my pictures : http://www.rbcom.se/explorer/ap/inside.jpg http://www.rbcom.se/explorer/ap/outside....

rickard

I have allways sent the supout.file and som info aboute the problem to the support@mikrotik.com mail.
and they allways respond back with information werry quick.

rickard

My RC4 Ap:s running verry well now. for more than a week.
exept for one of them that will not run in 333 Mhz :-(

rickard

I have 4 RB532 3 of them is running well in 399 Mhz. but in RC4 only 333Mhz. But one of them is only running in 266 Mhz. it cant get higer.

rickard

Problems with RC4 the clients get conected every 25 seconds ??
but it works:-) my log is full with wlan conected.
i will send the supout file.

rickard

RC4 Working fine on 4 base RB532 routers. and i think the problem with the wlan card loses the clients is gone :-)

rickard

No RC2 do the same thing for me the wlan card is ther but cant conect to the clients.... but if i enabel and disabled the card works fine.

rickard

Still no RC4 ? ..... i need it :-) my wlan disconects , i have sent the file again.

rickard

Hi all,

Try to lower down the TX power on the Wlan settings :-) it works!
i have a 9 Km link and i get 8 dBi more signal when i put in 21 as a range on the Atheros 5212 card on one of the sides in the PtP link.
and the signals get equal. on the diffrent sides...

rickard

still no RC3 for download :-(

rickard

Im thinking of Running WM Ware and MT and a small linus kernel with that LM sensor pack.

rickard

It have been nice if MT can put in a SW pack like the Routerboard.npk
a moterboard.npk :-) whit the support of LM sensors for the CPU temp
and Volt.

rickard

I have the same problem , i have tested running the RB532 card in both 266 Mhz , still the same problem and in 399 Mhz no diffrent.
the board works for one day.. but now when it happens i have only to disable and enable the card then it works for 24 H.

I have sent the supout file.

rickard

I have a lot of customers running with signal -77 dBm with Nstream and they get up to 19 Mbit Real TCP this is with 2.9 RC2
and the client is 2.8.26 on 2.4 Ghz G-only

rickard

We have the same problem, My RB532 runns for 22 Hours with 2.4 Ghz b/g and i get the same disconect error but i have the signal -69 to -73. But the 2.9.18 works for 22 hours and the 2.9.19 work for 2 hours. ? But my Wlan card get disabled??? and i have to set upp the Wlan card from scratch again. th...

rickard

I have the same problem but with AT5213 card.

rickard

Gino: Im using AP to station with routing. no WDS. its to slow :-) my network is based on routing to the clients. my customers get a smal VB program loks like a Dlink interface :-). and they can controll the Fierwall rules easy and the speed on the network is werry good. The record we have had to on...

rickard

To inform you guys , the routerboard 532 Works great, im running AP mode on 5 Ghz with Nstream with Atheros 5213 card the client will be upp and running tomorow :-) Some speed info : The AP is delivery 30 Mbits TCP real speed to the client (FTP transfer) Client is a routerboard 220 with 2.8.26 sw. a...

rickard

This is a word from my customer about OSPF that are using MT routers today. //Rickard The OSPF routing configuration needs to be changed. Today you need to configure what IP networks who are present on every OSPF area. No ISP in the whole world can do that since they have 100s of C nets all subnette...

rickard

Is it possible to get the implementation of BGP v4 reference Zebra/Quaggas BGPD ? and IS-IS for OSPF support ?.
I need that to one of my customer it verry important :-)

rickard

I have been testing all night long now :-)
and it works, verry god. But i think it is complex for the end users.
lots of information. But for me its perfect.

I will show my version of utility for aligning antennas for the enduser, but that one ist based on read SNMP only

rickard

I have a strange thing to :-) i have a Atheros 5212 (CM9 Clone) it is a A, B , G card but its shows up in MT only like a B, G card..it will not give me any frequenses on 5 Ghz... i have mailed the support about this.

rickard

It works very god on the Karlnet platform up to 15 Km with a 15 Dbi omni

rickard

I wonder how far you can go with the option antenna in the wierless package. The parabolic antenna has 30 dbi and the option version have 23 dbi , have anyone test that ?, and the speed ? Im running today Karlnet stuff to the clients that ok but i need more speed on the backbone net. i wondering if ...

Search found 144 matches