MikroTik

Doveman

what is the voltage of the PSU that you use in the injector? what injector do you use?
The Voltage of the PSU is: DC 24.0v with 0.8A, I use Mikrotik Gigabit POE injector

The router is no more booting, It only show power led, Eth led and the rest led lights are fast blinking.

Doveman

what is the voltage of the PSU that you use in the injector? what injector do you use?

The Voltage of the PSU is: DC 24.0v with 0.8A, I use Mikrotik Gigabit POE injector

Doveman

The Voltage of the PSU is: DC 24.0v with 0.8A, I use Mikrotik Gigabit POE injector

Doveman

I installed Basebox2 and tried to place it 30meter away from the POE and data source with cat6 cable but the router keep on restarting. What can I do?

Doveman

Check out my Firewall rule, I noticed that my router is blocking some sites as well because if I browse those sites directly I could access them.

Doveman

Thanks Denis, I will look into that now and post update on it .

Doveman

I have this small network setup where I used MK router RB800 where users connect through hotspot setup: I Setup four wireless router(linksys routers). The routers were setup just as bridge to my MK router.Ether1 host the incoming internet link, a cable from ether2 to a switch (8ports) then the route...

Doveman

Still asking, any threat to my Network(router)? Just curious to know.Though I will do as suggested.

Thanks.

Doveman

I got this in my router log, what does it means and solution to it.
Thanks.

Doveman

I have RB800 routerboard configure for internet access through hotspot setup in the router. But I discover that users were unable to access internet through the hotspot at interval (30 -40 minutes at times) until the router is restarted.
Files attached.

RB1.jpg

RB2.jpg

Doveman

Please help, I discover that internet access through my RB800 stops at interval until the router is restarted.
What do I need to look at or adjust.I use static IP and two DNS IP. given by my ISP

Doveman

The clock is back to default because there is no battery on board try to use NTP client on the first give more info what kind of connection u use PPoE, static ..... u have log maybe u can see there what is going on. Thanks for your response. I use static IP conf with Two DNS IP given. I will check ...

Doveman

Please help, I discover that internet access through my RB800 stops at interval until the router is restarted.
What do I need to look at or adjust.Also the system clock back to default whenever it restarted.

Thanks.

Doveman

I have RB 800, but discover that my internet speed is slow when having like 15-20 users connected(expecting more than 100 users). My ISP is giving me 2MBPS(bandwidth) internet connection which I expect to be more than enough, hope nothing is eaten up my bandwidth.Please, how do I speed up my interne...

Doveman

go to http://www.mikrotik.com/download
select rb800 series
click view more
download zip file.extract then open win box>file and copy all file in file list then reboot mikrotik from system>reboot in winbox.

.

Thanks for your response. Yea ,I have done that.Thanks.

Doveman

Please, how do I download and install user manager for my router RB800. The link to download the user manager files, which files to download.

Doveman

Have you checked the logs, tried another power supply, or reflashed the 433

Thanks, once again. I powered it through POE, but I have changed to direct power through its adapter. I'm still observing it.
Thanks.

Doveman

Have you a radio card attached if yes plug it out and see if the 433 will stay on or restart?

Thanks, No radio card on it.

Doveman

Please, what can I do my router is restarting every 2-3 minutes.

Doveman

Pls, How do I block a particular site in Mikrotik router(ROS) configuration. I mean through winbox

Doveman

@GuJack20, Thanks for your response. Please what do you think I can do with this Bandwidth quota, I mean way to share the bandwidth equally with my user.

Doveman

Please, I just want to know if my queue list and hotspot user profile is configured properly. My actual bandwidth from my ISP is 384kbps/128kbps or do I need to do something again because I still experience slow internet access sometimes
Here is the screen shot:

Doveman

Pls, I need to upgrade my RB433 any info how to go about it.

Doveman

Pls, Help config Web Proxy on RB433. Any advantage/ disadvantage of web proxy on RB433

Doveman

Thanks Netrat, I tried to access a system on my network (LAN) with its IP.When I opened my network palces I type the IP of the machine in address bar but no reply. I have RB433 on my network,I hv chcked the firewall where I disable Protect Lan in webbox I then opened winbox and try to ping the IP bu...

Doveman

Somebody Pls, Help

Doveman

Pls help,I tried to access another system on my network with the IP add given out to the system by dhcp but couldnt get through. I even try to ping the IP in my winbox but the reply i got is timeout.Even the machine on which I open the winbox,its IP also timeout when I tried to ping.Its only 192.168...

Doveman

Pls, Kindly put me through on how to set PCQ for my hotspot user with this Bandwidth: Rx:384kbps/Tx:128kbps close to 50 users I have gone through Mkwiki PCQ but i couldnt get how to do this particular one.Thanks.

Doveman

@Normis,Pls any issue on cable i.e using crossover or straight cable to connect from RB433 to PC Lan? bcos I'm having problem with my RB433 connection I use straight cable to connect both Poe and Ether2.

Doveman

@Sergjs,Pls explain in detail

Doveman

@SurferTim, can it be done through GUI winbox.

Doveman

@SurferTim, Pls put me through how to go about it. I have dowloaded the file but dont know how to upload it into my router.

Doveman

Please, How do I go about it, I have X86 that have MK Ros on it with L4 license and just got RB433(L4).I want to use both of them on my network.i.e I want to use the x86 to have the internet link on it and configure it normally.

Doveman

@ Sergejs Thanks, I would check it now.
Pls, you can help with code or how to go about it in winbox.

Doveman

@SurferTim Thanks, after downloading the package, Pls I do I go about it in RB433

Doveman

Pls, Help I'm unable to access userman.
After configuring my RB433, I could not access userman.
somebody pls, help.

Doveman

@ Danny Z, you check my F/W filter rules. waiting....

Doveman

@Dawam,Thanks, Do I need to set IP on lan interface after the bridge and internet interface

Doveman

Please, Somebody help, I can access usermanager on my RB433 and Hotspot login doesnt comeup when click browser on system until I put IP e.g 192.168.0.1 in the browser.
Firewall filter rule attached

Doveman

Somebody Pls Help,I cannot still access userman.

Doveman

@Sergejs Thanks,I have done so,but I cannot get to the internet and even userman page,may be something is wrong with my setting or firewall rule,U can check it up there I have pasted it there.

Doveman

Here is my config settings

Doveman

Here is F/W filter rules, besides I can not browse the net after the normal config and bridge

Doveman

Pls,can you explain how to go about it, bcos after the bridge the setting changed.I cannot browse again and the hotspot and Dhcp config changed.
Pls,Hw do I go about from the scratch.

Doveman

Pls, I tried to set bridge with wlan and lan on RB433 .It worked for a while but later stopped.
Pls,how do I go about it again

Doveman

Doveman

Pls help, I want to access userman in RB433, but i couldnot get through.

Doveman

I have RB433 setup and was trying to login with IP thru winbox but could not,It only login with mac add only pls Help.

Doveman

@normis, Thanks.Good to go for now!

Doveman

@normis, Thanks again,one more question: to login into my box I think i will use Username:admin
then Password field:blank

Doveman

@normis,Thanks for your reply.
Pls,after reset, I think i will need to reconfigure the box from the scratch?.

Doveman

I forgot admin password to login to my box.How do I retrieve the password

Search found 52 matches