Community discussions

MikroTik App

Search found 7 matches

by Roman4604
Wed Jan 12, 2011 1:16 pm
Forum: General
Topic: RB 450G, IPv6 - problem & partial solution
Replies: 99
Views: 33534

Re: RB 450G, IPv6 - problem & partial solution

BTW: 5.0rc7 has the RA problem as well.
MT have indicated fix will be in RC8 ... http://forum.mikrotik.com/viewtopic.php?f=1&t=47846
by Roman4604
Wed Dec 29, 2010 12:44 pm
Forum: General
Topic: 5rc6 + Win7 IPv6 stateless autoconf issue
Replies: 9
Views: 4451

Re: 5rc6 + Win7 IPv6 stateless autoconf issue

Hi mrz, Yes disabling/enabling ether1 also wakes up radvd, but then breaks IPv6 routing between LAN & 6to4 tunnel (probably due to ether1 also being my PPPoE inf). BTW figured out the advertise=yes is not neccessary, simply adding the local-link addr (over-writing the DL entry with a L one) is e...
by Roman4604
Wed Dec 29, 2010 10:28 am
Forum: General
Topic: 5rc6 + Win7 IPv6 stateless autoconf issue
Replies: 9
Views: 4451

Re: 5rc6 + Win7 IPv6 stateless autoconf issue

Hi normis, After I overwrite the dynamically created local-link entry (with Winbox), both local-link & global addresses on ether1 have advertise=Yes ... # ADDRESS INTERFACE ADVERTISE 0 G 2001:xxxx:xxxx:xxxx:20c:42ff:fe70:d61/64 ether1 Yes 6 L fe80::20c:42ff:fe70:d61/64 ether1 Yes I also agree, a...
by Roman4604
Wed Dec 29, 2010 12:39 am
Forum: General
Topic: 5rc6 + Win7 IPv6 stateless autoconf issue
Replies: 9
Views: 4451

Re: 5rc6 + Win7 IPv6 stateless autoconf issue

Hi fewi, Thanks for the link to the thread ... seems like this is a long running saga. Yes the ports used for direct connect & ext. AP are both slaves of ether1. I swapped it so that the AP is now on ether1, other ports still slaved (dont have ext switch atm). But after 2 power cycles of RB &...
by Roman4604
Tue Dec 28, 2010 11:38 pm
Forum: General
Topic: 5rc6 + Win7 IPv6 stateless autoconf issue
Replies: 9
Views: 4451

5rc6 + Win7 IPv6 stateless autoconf issue

I've been having some issues getting IPv6 stateless autoconfiguration working reliably with a RB750G with 5rc6. Dont think it particular to 5rc6 as I've previously observed the same results on 4.13 & 4.16, but since 5rc6 is the latest IPv6 updated, thought I'd post here. The Win7 laptop I'm test...
by Roman4604
Tue Dec 28, 2010 2:54 pm
Forum: Scripting
Topic: Dynamic DNS Script (No-IP and others)
Replies: 7
Views: 22651

Re: Dynamic DNS Script (No-IP and others)

Most of the dynip scripts I've seen are memory based, meaning updates will be sent after each reboot. Sometimes I want to muck about with my home network doing many reboots. Since some providers get a bit upset if you bombard them with updates where the ip doesnt change, I wrote my own file based up...
by Roman4604
Wed Jan 27, 2010 8:05 pm
Forum: RouterBOARD hardware
Topic: 750G auto-neg issues with Intel GbE
Replies: 0
Views: 923

750G auto-neg issues with Intel GbE

Hi, I cant get my RB750G v4.5 to auto negotiate properly with Intel gigabit adapters; Dell E6400 with onboard Intel 82567LM (Win7) Intel DP43TF motherboard with onboard 82567V-2 (XP SP3) If 750G ports are set to 1Gbps, auto-neg ticked, full-dup ticked, and either PC set to auto-neg, both sync at 10 ...