MikroTik

ottoshr

and I see that no on SwOS either !!! CRS series
doesn't understand why Mikrotik doesn't want to add history or at least syslog to collect history of information, warnings and errors ?!

You mean syslog? No option on SwitchOS lite.

ottoshr

SNMP + LibreNMS, gets me stats about health, throughput, link up/down events, interface errors, stp, etc.

snmp status you got only when you request something then device answers , is it only possible solutions for SwOs ?

ottoshr

LOGS
IS THERE any possiblity to add to good hardware (CSS610-8G-2s+) logging !???

ottoshr

Some of the RouterBoards have full USB power output, but not all of them. Check out this link. The info you are looking for is at the bottom. http://wiki.mikrotik.com/wiki/Manual:USB_Features We install USB power injector between hEX PoE lite and Huawei e5377 and problem is the same after 24 hour m...

ottoshr

New hEX POE lite with 30W adapter - problem the same USB port for Huawei 5377 modem does not have enough power it SUX !!!! we need to find injector and additional power supply... WHY in old RB750UP USB power is OK!!! actually it powers it to 100% if modem is OFF , when it is on and connected to mob...

ottoshr

New hEX POE lite with 30W adapter - problem the same USB port for Huawei 5377 modem does not have enough power it SUX !!!! we need to find injector and additional power supply... WHY in old RB750UP USB power is OK!!!

ottoshr

Please keep inform others about possible replacement !

ottoshr

Is The Dude still improving or in some developing phase in Mikrotik or this project is DEAD ?

ottoshr

When will be v4 stable release? when it is possible to remove selected outage from view Outages ? when export and import will work. stable release please !!!

ottoshr

if you are powering RB750UP with power-cord you do not have any problems powering other devices within allowed powering range. So how exactly these will solve the problem? problem was when we powered up 750up with standart psu 2,5A 24VDC with power cord , poe devices restarts from time to time, cab...

ottoshr

looks like problem with powering up ubnt devices with poe soon can be solved with
http://www.ubnt.com/airmax#toughswitch
http://dl.ubnt.com/guides/toughswitch/T ... rt_QSG.pdf
http://dl.ubnt.com/guides/toughswitch/T ... rt_QSG.pdf

ottoshr

you can do that with low voltage (from same supplied power supply as electrical cable has less resistance as result less voltage drop over the cable and less fluctuations on power spikes. we tried but there is also loss of voltage and with 21,9V it almost not working , restarts poe devices from tim...

ottoshr

no, 5.17 does not introduce anything new, in the mean time, you can
9if possible) run longer power cable to the RB750UP to power connected devices successfully.

Yes, we do that. But better will be if there is going low voltage not 220V for fire safety and etc.

ottoshr

Please be assured, that we will post any news as soon as we have them.

5.17 is without updates in this POE issues?

ottoshr

Sorry for not replying sooner - we are still working on it, and developers promise a solution hopefully next week. Normis (Mikrotik) we are still waiting and hoping that someday these problems/issue/bug will be solved somehow with firmware update ! Normis, Mikrotik any news concerning RB750UP poe i...

ottoshr

Sorry for not replying sooner - we are still working on it, and developers promise a solution hopefully next week.

Normis (Mikrotik) we are still waiting and hoping that someday these problems/issue/bug will be solved somehow with firmware update !

ottoshr

ottoshr ethernet cable only have 4 pairs with 2 wires each (a pair) or i am missing someting from your post?

MyThoughts you effectively reduced by half the power loss over the cable, of course that works perfectly well.

we have 2 cables in that tower i describe.

ottoshr

question about cap was my first question to designers - reply was simple - you do not what to shorth anything anywhere near that board. larger the cap, larger the discharge voltage that can cause serious damage do the board and connected equipment. Better option is to add it near the PSU to make po...

ottoshr

question about cap was my first question to designers - reply was simple - you do not what to shorth anything anywhere near that board. larger the cap, larger the discharge voltage that can cause serious damage do the board and connected equipment. Better option is to add it near the PSU to make po...

ottoshr

last corupted table 403 problem update , problem still not solved C:\>sqlite3 "c:\program files\dude\data\dude.db" SQLite version 3.7.7.1 2011-06-28 17:39:05 Enter ".help" for instructions Enter SQL statements terminated with a ";" sqlite> .databases seq name file --- -...

ottoshr

Please help me to export from sqlite3 table objs, where is all dude403 devices and settings, becouse i coldnt repair this database file , after cleening broken table and starting dude it cleans all records to default empty without devicesw and settings !!!

ottoshr

1) I UNDERSTUD PROBLEM it was table chart_values_raw; 2)try to delete content didn't help get error see attachment pic. 3)please explain how to run vacuum into comand line shell ? 4)try backup restore - it helps - table now i can open , but when i copied it to dude directory and run dude it delete a...

ottoshr

i run sqlitemon 1.2.2 and got error when try to vacuum, could you please give a name of proper utility ?

ottoshr

ok, i try do this but i got error when try launch vacuum.

Normis what tool do you recommend for vacuum sqlite dude database ?

ottoshr

i 'm not sure that problem is with database size, in my case it looks like something happen'd wit database itself, maybe problem with storage where it is stored or something like that. But some records ar commited and some are not - in result memory usage is growing and after dude service restart lo...

ottoshr

can you help me repair database? or migrate to new one without data gathering but with all devices and settings !?
also data gathered saves only few records - how it is possible ? but for example saves new devices and etc...

ottoshr

but why use of memory when started use minimal and start increasing with usage? could you explain how memmory and maps and device count is connected ?

could you please help me with outage problems - that i describe above?

ottoshr

yes dude 4.0 beta 3
29 maps, aprox 200-300 devices, donn't know how to calculate in dude

ottoshr

Also there is something with memmory usage below 2 images before and after dude server restart, once more after restart server lost some outages records , and memmory usage is minimised.
use server as service. windows 7 on citrix virtualisation.

ottoshr

yes thanx sounds fine ... BUT anyway i had a some problem with database or table ... after restarting dude i see that only few outages are written in table !!! WHAT should i do ??? i have around 200-300 services configured in dude and since in 4.0 version beta 3 is no XML backup how to move my servi...

ottoshr

becouse no one is helping in this trouble, i try to d something i can. by the way remove resolved also didn't do anything in my case. I download several sqlite3 tools and try to delete in table outages rows where status is 1, but this 10 rows that are stuck also can't delete in that way (delete from...

ottoshr

how with mikrotik get two links working together , you mean sinchronised ? in bridge ?

ottoshr

ok, but SXT has allready two chains ! why inox need two antennas for two chains ?

ottoshr

inox
why there is 2 antennas ? dou you use both polarization in each of them? doe'snt they are in each other fresnel zone ?

ottoshr

I see BIG Outage problems: 1)couldn't find remove selected outage button, this means can't delete several outage only all 2)couldn't find add note to outage !!! for later review of current outage 3)after restore several outage is not change state to resolved but service is working - how to remove o...

ottoshr

please help nothing changed still got these hanged outages... tried remove all , no response, removel all outage in each device trough decie settings only removes outages for this device, but these hangs are still active. try once more make backup and restore - the same. restarts many time OS and du...

ottoshr

you can use this reflector http://cn24.net/SXT-Shield-50.jpg then your SXT is safe . No rain will come into the holes. Contact me by Email . We ship anywhere worldwide. but in winter ? if snow covers inside of this box, and when after sun shines, there will be ice ! what about signal trough ice and...

ottoshr

where is long guard interval ?

ottoshr

May be you need to use my Reflector SXT http://forum.mikrotik.com/viewtopic.php?f=3&t=52985 for a better result.

maybe but how we can buy it in Latvia ? looks like you are in ukraine ?

ottoshr

reply please how do you set MCS10 only ?

ottoshr

Turn your SXT 90 degree and you will get adequate signal strength.

how SXT should be aligned ? 4 holes for air in below or at some side ? and then sign mikrotik is top to bottom ?

ottoshr

I see BIG Outage problems: 1)couldn't find remove selected outage button, this means can't delete several outage only all 2)couldn't find add note to outage !!! for later review of current outage 3)after restore several outage is not change state to resolved but service is working - how to remove ou...

ottoshr

Connecting SXT each other and other 5Ghz: We have bad results connecting SXT 5hnd to Routerboard 433ah with R52Hn with Itella antena, 2km range clear connection no trees or buildings in range (height 25-30m). Tx from 433ah working normaly but RX (tx from SXT) is very week; db ar jumping 64-75 dbm; b...

ottoshr

TCP the Test on Х86 from both sides for SXT 5HnD with 90Mbps

Please place picture if available ?
Any comments from Mikrotik guys ?

ottoshr

please post config SXT 5Hnd ! Cant get them worked more than 135Mbps ... connected ! upgraded to 5.0rc10 but no result ! I wonder how to get 270Mbps and at least aprox 100Mbps duplex at least on the table. one side [admin@MikroTik] > interface wireless print Flags: X - disabled, R - running 0 R name...

ottoshr

I have trouble with setup SXT works wery slow... [admin@MikroTik] > interface wireless print Flags: X - disabled, R - running 0 R name="wlan1" mtu=1500 mac-address=00:0C:42:84:66:1B arp=enabled interface-type=Atheros 11N mode=station-bridge ssid="MikroTik" frequency=5240 band=5gh...

ottoshr

I have problem with SXT 5hnd, seems llike i cant get on the table more than 10-20mbit/s.
What would be on the field 1-2km ?

Search found 47 matches