we dont use any rules, proxy or nothing in the bridge.
We have a public site, when they access from outside, we dont get their address, we only get the one from the bridge!, so we dont know who is accessing.

Thanks

We have a Mikrotik with 2 servers connected to each interface, 2 lans and the WAN one. we are bridging everything in the router so everybody can see everybody but we have a problem When some request an http page from one of the servers, the source ip address changes to the address of the Bridge, the...

We have one bridge over all interfaces, except the WAN one

We have several 450g, that receive one WAN an then have four segments of our own LANS, right now we are bridging, but it takes resources and two of the segments have servers and we are not knowing who is accessing. interface 1 WAN interface 2 LAN interface 3 LAN interface 4 server interface 5 server...

Which is the OID for CPU utilisation, we are using cacti and dude to monitor the whole network, but we have a client how needs to know the load on his switch.
and we have´nt found it?
How can we monitor the CPU utilisation or load in the cpu?
Thank´s in advnced

We have a Cisco SG200-26, that does not support snmp, but instead Rmon
We upload the rmon mib in dude, but from there...
How do we do it?

Thank´s in Advance

Solved!
different port
Thanks to anyone

We tried also with gmail
tls activated, port 587
and we get the same error
We are doing this in a 450g
and in a 411 with 4.11 that is in the same subnet we can get it working
Thank´s

Nothing just:
Error sending E-mail <subject>: error connecting to server

but we can ping the server, even telnet the email server
Thank´s

This is what we are doing: /tool /e-mail send to="user@domain.com" from="<user1>" body="test0" subject="test0" server="x.x.x.x" password="xxxxx" user="me@mydomain.com" port="25" and in 4.11 works fine, not with the same ...

We been trying to sen a email in routeros 5.19 and is not working, when we send from a 4.11 os version it´s ok, sents the email ok

Yes I work with it, all the time.

We have a new 411UAHR, and wont recognize the usb port [admin@MikroTik] /system resource usb> print # DEVICE VENDOR NAME SPEED 0 2:1 RB400 EHCI 480 Mbps 1 1:1 RB400 OHCI 12 Mbps [admin@MikroTik] /port> print Flags: I - inactive # NAME CHANNELS USED-BY BAUD-RAT 0 serial0 1 auto we are connecting a so...

We have a new 411uahr and trying to connect to a 3g network via a sony ericsson usb modem, but the board will not recognize the modem, either in resources or in ports,
and the modem is supported by mikrotik
do we need to install some drivers?
what can we do?
thank´s in advanced

for this you need both CPE to be Level 4 license?
Thank´s

We want the wireless connection between to CPE`s to act as physical medium only. we have same ip, mask in both sides, just want to connect both buildings We are using the ap-brige in one side and the other side is a Station Pseduo-bridge, but in the pseudo side we can not view by winbox the CPE from...

We have a 411 board, with 3.1 routeros and a ubiquiti XR2 radio, that used to work fine! the routeros wont recognize the radio anymore, so we change it for different ones ( another XR"¿2 and a 52nh) and still wont recognize it in the wireless tables, there is name for the interface, but no MAC ...

We have an interface named DRO which has 2M during all day.
We want to change to the following
During working hours wan to give DRO the 2M limit in a 6M adsl
but from 8pm to 7 am we want to limit to 512K
how can we do that??
Thank´s in advanced

We have a large LAN, who is connected to a ISP provider. In the lan they have several buildings, some are connected by ethernet and others point to point wireles no one has priorities, all of them are connected thru a series so switches. we want to have several groups with bandwith priorities. Group...

How do i extract a password from a backup configuration file?
I forgot the password for that specific file
is there a way to do this?
Thank´s in advanced

We have 1 E1 with a cisco 3640 connected and 3 adsl 4 mbps downstream, the 3 adsl are connected to the mikrotik the cisco is connected to a catalyst, the catalyst and another switch are connected to the mikrotik. What we want is to all traffic entering (uploading) the network goes through the cisco ...

We are running a configuration in one mikrotik
but we have an older backup in the file
we want to read that backup file in a text file so we can compare the two configuration without loading the older backup
Can we do that??
or there is a way to this?
Thank´s in advanced

Is there a way of doing it with the webproxy?

We want to block all traffic, then create a list of possible sites allowed.
Like
access to *.gob.mx
access to reforma.com
access to mail services

and then keep growing the list