MikroTik

emmanuel

HI

NO WHAT AM SAY IS THAT WITHOUT BGP PROTOCOL

emmanuel

hi guys

i have two links one is fibre and second is vsat,what am try to workout is that i wanted to fibre for our uplink vsat for downlink.i know he work out easy on bgp but now i ddnt bgp.is either way of doing without bgp.

thanks

emmanuel

pl when un get de solution pl let me know

thanx

emmanuel

well mikrotik proxy is do well but the problem am see is just max-object size sholud be include in 3.0 ur proxy would be wonderful.
thanks

emmanuel

hey guy
pl i need ur advice on this
can i use router600 with proxy enable with compactdisk?

emmanuel

hello
thanks u guy for a good jod.well am have small issue on 3ver is the queue setup,when some allocate bandwith for ip address on 3ver it is not work well like give 64k to any ip address when check usage it take more than 64k but on 2.9 is better than that.pl is any thing i need to done?

emmanuel

pl i want to know if ur this config wiil work in ver 3rc13,he works with 2.9 but i dont if he wiil work on 3vrc13 because i wanted to setup in my network. MANGLE : Code: 1 ;;; Upload chain=prerouting in-interface=localnet src-address=192.168.1.0/24 protocol=tcp p2p=!all-p2p action=mark-packet new-pa...

emmanuel

skillful when is working in 3.0cr4 is there any compliant and look am not the only person say that ok

emmanuel

skillful good man is working now thanx.

emmanuel

TOS setting of 4 is not working in 3.0rc5 pl chcek it out

emmanuel

agian pl check the menu u wiil see two bridge option ok.i think there is problem with bridge.pl check out

emmanuel

it is working when u are using nat but with bridge is not working ok

emmanuel

I CAN NOT BELIVE THAT MT ROUTER CAN'T SOLVE MY PROBLEM, PL IF ANYBODY HAVE SOLUTIONS THIS PROBLEM PL LET HAVE UR IDEAL THANX

emmanuel

hi
transparent webporxy is not working on 3.0rc5 pl check out

emmanuel

thanks for fast reply let be honstly with this not what wanted to setup but am just try to test this first then setup main platform.i have link from backbone through cable which my ip is wan=192.168.9.10/30 and lan is 196.1.0.1/24, then i setup mt router to face the network and breakdown the /24 to ...

emmanuel

admin@MikroTik] ip address> pr Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 196.1.0.4/24 196.1.0.0 196.1.0.255 ether1 1 10.80.1.1/30 10.80.1.0 10.80.1.3 ether2 2 10.80.1.5/30 10.80.1.4 10.80.1.7 ether2 [admin@MikroTik] ip route> pr Flags: X - disabled, A - ac...

emmanuel

pl guy if it not possible pl let me know

thanx

emmanuel

I WIIL BUT NEXT TIME TRY BACKUP UR CONFIGURATION.HE MADE JOB EASY WHEN THERE IS PROBLEM.OK

emmanuel

HELLO GUY AM HAVE SMALL PROBLEM WHICH I KNOW U GUY CAN HELP.I HAVE LINK FROM ISP WHICH MY IP ADDRESS RANGE IS /24, THEN I BREAKDOWN TO /30 WHICH GET 64 SUBNET AND HE WORK FINE, I SETUP A MACHINE MT ROUTER CONFIGURE IT AS BRIDGE MODE,DNSCACHE,BANDWIDTH HE WORK FINE WHICH PLACE IN THE FRONT FIRST MACH...

emmanuel

MY AIM TO IS WHEN PING MIKROTIK ROUTER THE REPLY TTL SHOULD BE SHOW 128 OR MORE THAN.

THANKS FOR UR FAST REPLY

emmanuel

HELLO GUY
PL IS THERE ANY WAY TO SET TTL IN MIKROTIK ROUTER.LIKE WINDOW PLATFORM IS 128 WHY MIKROTIK ROUTER IS 64.

THANKS

emmanuel

hi guy have usinng mikrotik for a wid and work well for me, but have small problem which going like this,i have mt box which i setup as bridge,webproxy and bandwidthmanager and he work fine but my problem is after have setup the pcq uder queue then for me to select it under queue tree the reply rate...

emmanuel

hi for the first time, i could able to get web proxy and queue tree to work which i get through the mikrotik wiki under bandwidth control,i did the way it was explain there and it work fine but i have small with my voip.my main problem is that when shape the voip through queue tree it would not cont...

emmanuel

pl if u can explaint more he sholudbe ok

emmanuel

hi guys well my network is working fine, but i wanted to do vlan,first let explain how the network diagram,i has three APMT523b which cover 360 degree and each has different ssid but what i did is just bridge on it because want the client to using public ip,no nat,and again my switch is dlink 16port...

emmanuel

hello guy i have small problem with web proxy,is a way wiil set ttl on web proxy like dns cache.for example i set up web proxy but if he work like 5hr or more than the network wiil get slow but under the hour i mentions is working fine and resopne is fast pl if any command that wiil set the time to ...

emmanuel

hello
am have probblem with web cache,like if i enable web cache for two days it work fine and after two day the network get slow than even i did not any web cache pl what did do to reset the web cache automatic intead of disable and enable back thanks

emmanuel

hello
am have same of site open pl tell me where to going, if want set to mtu in mikrotik router,because some is open througt nat connect.

emmanuel

hello
i have same problem,my queue would fine but when enables squid for me web catch the queue tree wiil shape well for me pl what i should now .

emmanuel

hello
pl if u can help me to post it here, i mean the one that work for u, i wiil very happy for that.thanks

emmanuel

hello
i have small problem,have setup network like 40 users with 4mbit but my problem is viop,in simple queue limit each user with there bandwidth with level of 8 and make voip level 1 but stiil near the call is not clear pl what did i do make the voip more clear and browsing we also fast.

emmanuel

i have base station mt routerboard 532 and have some clent on it which they using senao and they all work fine but if try connect teletronic radio it would work with can any body help out thanks

emmanuel

how can get the official distributors am in nigeria

emmanuel

hello all pl i have an issue of change mikrotik page.he go like this i have mikrotik as a bandwidth manager an is working fine,which allow my clients to see there useage on mrtg an they see it but before get there is page show there mikrotik,is there way i can change it to my company name instaed of...

emmanuel

i have mt as a base station which i have about 32 client is connected to it.on client end they all used seano radio and they all work fine but the problem now is the issue of channel on radio i have just 12 channel as europ standard but wanted to change japan standard which has a 14 channel,pl how w...

emmanuel

thanks for ur reply.but am stiil with problem,what try to said is have routerboard 532,what is processing to reset the routerboard to default,which mean my admin password wiil go back default.pl i need ur reply fast.thanks

emmanuel

i have mikrotik router which for wireless connection as base,but have forgoting my password and then tr to reset but stil show old configuration,pl help me out the way i can reset .thanks
rotimi adekunle

Search found 37 matches

Re: uplink and downlink

uplink and downlink

Re: transparent proxy over 2 gateway

Re: ROS V3.10 is out

proxy on routerborad600

bandwidth manager on 3rc14

samsoft08 webproxy 3rc13

Re: Mikrotik + Web Proxy Queueing is Impossible ?

Re: webproxy is not workinkg

Re: Mikrotik + Web Proxy Queueing is Impossible ?

Re: webproxy is not workinkg

Re: webproxy is not workinkg

Re: WEBPROXY WITH /30

webproxy is not workinkg

Re: WEBPROXY WITH /30

Re: WEBPROXY WITH /30

Re: WEBPROXY WITH /30

Re: WEBPROXY WITH /30

WEBPROXY WITH /30

Re: TIME-TO-LIVE

TIME-TO-LIVE

web proxy and bandwidth control pcq

voip and web proxy

VLAN ON ROUTER BOARD 532B

web proxy slow

webb cache

mtu

web proxy queue

voip

teletronic

mt

mt page

11 channel to 14 channel

reset on routerborad 532

reset