Hi Im trying to accomplish the same thing on my MT 750g router but i dont know where my public IP should be assigned. By the way my Network config: IP Address from ISP: 69.165.169.165 Network: 206.248.154.121 Interface: pppoe-out1 I got from ISP subnet: 69.165.169.165/29 6 usable IPs. Question: - Do...
thank you a lot. beautiful diagram. I really appreciate for u help. How would u implement the diagram within mikrotik? in firewall or in routing? Ps. i think routing, i tried to test it to my pc computer win7 i added additional ip address but i still get the NATed gateway ip pppoe: 69.165.169.165. W...
I have DSL connection over PPPoE with public sub-net mast ip range 69.165.169.163/29. ( The PPPoE WAN public IP address is: 69.165.169.165/29 ) How do you assign the public static ips to private subnet on eth2: 192.168.1.0/24 ? ( to any four addresses)? Remember the sub-net 69.165.169.165/29 is rout...
HI Thank you for you reply. I'm trying to upload image scanned on my scanner but the forum file upload give me http err. Anyway. I was in rush creating the post sorry for confusion. Basicly i want to assign static ips from subnet xx.165.169.165/29 to my LAN PCs and servers on LAN interface ex. eth 2...
HI I want to assign static address from subnet 74.165.169.163/29 to my clients. ( 4 ips) I have also, another subnet 183.246.159.2/30 that i asigned to clients and it works OK with src-nat and dst-nat, vice-verse. But it doesnt work for the 183.246.159.2/30 ips. ISP ( it is PPPoE dsl ) asigned me or...
I HAVE EXACTLLY the same problem with rb750g when downloading around 15mbs the cpu uses 100%. i use the proxy to redirect to parent squid but still is the same.
i tried to redirect in NAT Firewall but it doesent work, proxy err page in browser
What do u men solder the heavier cable? for what what is the purpose for it? it will work with ubiquiti outdoor pluse? how many of them this can power? be specific.
Hi 1st Question ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- I want to use the OmniTik UPA-5HnD fand RB750UP for hotspot backhold. Basi...
Hi 1st Questin -------------------------------------------------------------------------------------------------------------------------------------- Can the RB433AH be powered by POE device ex: Ubiquiti toughswitch? what voltage? What other RouterBoard can be powered by POE (pasive)? I got RB750G a...
Hi Can someone give me some advice regarding the Mikrotik OmniTik UPA-5HnD fand RB750UP POE output ? Basicly i want to know what NEW unifi access point the OmniTik UPA-5HnD fand RB750UP can power with theirs POE ports? I found on internet this info: http://wiki.mikrotik.com/wiki/Manual:PoE-Out but i...
i was thinking using the omnitik5gz as backbone that powers other devices with poe. But i dont want to fry my picom2hp (100usd not cheep). thoes the omnitik5gz sense the device poe power requirement? What is the min and the max it can sense and ajust the output for it.?
According to your 1st post. Will all people that use more than ex. 50 connection with web browser or torrent client get block for 10 minutes in or outside my nated lan?
hi mikrotik we need omnitik upa in 2.4 band, for hotspots ( daisy chained or star topology, small to medium setup size 5 to 10 access point together in one location, example: apartments, high rise complexes) the omnitik upa 2.4ghz will be the best, better than ubiquit unifi outdoor + 2.4 ghz with rf...
how do you block ads with squid? i use the pfsence, and i like it, it has gui so is quicker to set up and go. would be nice if i could block ads on people smartphones/computers with fpsence. Do u use it.? BTW MIKROTIK :H thanks for the tutorial helped me a lot to understand routing and squid, comput...
Hi Thanks for you info. But I dont see those entries like you mentioned in my RADIUS log file on my mikrotik router. Time (SNTP ) on the mikrotik router are set up appropriated and are ok on the Radius too. RADIUS ssh welcome msg: ---------------------------------------------------------------------...
Hi Does anyone know how to force self-register user to first pay for the month before he/she will be allowed to log in and use the internet.? Cause right now new users register and right away they can use the internet without paying. I dont want users to verified the registration that is not needed....
Hi I have given to my users a 15 minutes trial within 24 hours. The problem i that they after 2 min of no activity they get disconnected and hey have to log in again. The problem is that i dont want the same use log in back in with no issues after half an hour for another 10 min and get disconnected...
I have 3 static ips. One is use to route thru the othe two ( subnet of /30 ) So i assigne the 1st one to WAN and the other two i assigned to one bridge interface. And then i run 1:1 ip mapping so my synology get the WAN ip and the other Secondary DNS get the ip from /30. And i also do Hair-Pin Natin...
Hi I want to map two public/wan ips on my MTik to one private ip. I have a NAS synology that i can not assigne permently two static IP. I can add a virtual ip but after reboot i have to manually do it again. That wont work for me. I want to run test DNS server on LAN and WAN access, and i need to ha...
Hi Thanks for you input. I don't have any body at the moment with the "D" but i have few hours before. The user was not active at all. But before i had user that was downloading surfing the net etc. no problem. I use MAC COOKIES for trial users. Do you think the someone could just reconnec...
ok But listen to this. Lets assume that i have a wireless hotspot network with one gateway internet connection with 20 access points (433AH three radios ) in chain layout. a-->b-->c-->d-->e-->etc. to 20th AP. Let assume there is 1-3ms delay on each hop. So. If i get on my gate lowest 70ms delay to m...
Ok I have again user in "Hosts" list with "D". But why? I have users to allow users to connect only if they ask for IP from DHCP server first. DHCP server conf: authoritative: yest, bootp: static. Or Maybe the computer shows up with "D" because the computer disconnected...
Hi I have the same problem with hotspot. Most of the time my users hosts are "H" or "AH" as normal. My DHCP server is set to: Authoritative: yes, Bootp support: static. I enable trial users on my hotspot for 15 mininutes with MAC cookies. Sometimes i get users showing flag "...
Hi I have the same problem with my hotspot. I have hosts in my "HOST" tab showing "D" Where that came from? it should be "H". The ip should be given ( i force users to ask for dhcp ip address otherwise no connection ) by dhcp server. AND THE PEOPLE ARE ACCESSING INTERNE...
Hi I am trying to do same thing. Can you guys tell me if you managed to create cross-subnet browsing with VPN and mikrotik SMB? Let me know. Here are some really use full links about samba wins browse list, subnet etc. all you need to make it happen. http://www.linuxplanet.com/linuxplanet/tutorials/...
Hi I have 25Mbit internet connection, ( cable ) and i have installed squid3 proxy server on one of my local LAN pc. All the pcs are connected to MT 750G box. I have only 3 pcs, and are connected to 2, 3rd, 4th, port on MTik box. I had configure the squid and it works, but it is so slow i get around ...
Thanks man, i really appreciate that. I still can not figure out how to do the last thing. F.Y.I, all work except one rule. ;;; Drop all hotspot clients accessing ISP subnets. chain=forward action=drop src-address-list=hotspotSubnet hotspot="" out-interface=!ether1-gateway This is my addre...
Hi I have a hotspot and trying to ban clients from my internal network ( i have few test subnet, which one of them is used to manage access points devices ). I dont want them to have access to those devices not piging, tracerouting, no smb file sharing etc. THEY CAN ONLY GO TO INTERNET that its. I k...
HI I have configure a hotspot on my 750G MT box. I have the following configuration Port 1: Is my WAN connection to internet ( ISP ) Port 2 and 3 : Are used for my casual internet browsing network : 192.168.88.1/24 Port 4: Has network 192.168.77.1/24 Port 5: Has network 192.168.66.1/24 with 4 VLANS:...
Hi I have a dilemma which config is better in terms of ping, tracert, VoIP, speed, in hotspot isp. 1st option : is configuring all the MT Access points in the mesh network with one portal or more in future with and NAT users behind theirs Public or Private IP. 2nd option: is to have all the access p...
Hi Can someone tell me how log err/event or anything that may cause the not being able to connect to my 750 routerboard. I can connect to it thru Web http, and, ping, trace rout, etc, i can connect to other MT 750 RBs, i have 5 of them in chain set up in RIP protocol. The winbox service is on and ac...
Hi Considering this scenerio with RIP1 or 2 loop 192.168.1.10/32---192.168.1.11/32 ---wireless---->[b]192.168.1.12/32[/b]----------192.168.1.13/32-------wireless------>192.168.1.14-------192.168.1.15/32 | | | | -------------------------wireless-----------------------------------| |-----------------...
Hi Thanks for you input/time. Goal: 1) I want to run/have MIMO or at least 802.11 N in 5.8 Ghz as a back bone connection between my hotspots Access points. 2) I want to have seperate antanna for clients. Questions: 1) What miniPCI would you suggest. 2) What miniPCI did you used or test on 433 / AH R...
Hi I am planing to set up small around 10-15 access points to provide hotspot internet. My question is: 1) Does MT hardware can assabled and configure for this kind of configuration? 2) What hardware would you recommand me i mean what RB, what miniPCI, card antennas etc. 3) Did any of you tried this...
Hi I have set up pptp link in RIP routing between my lab mt 750 routers. After configuring the pptp link , and I enable arp-proxy so i can ping and have connection on the local lan PCs. I can ping and tracerout ok, the interesting thing that i want to know is that even when i don't ping or tracerout...
I updated and changed back to original version. The problem was that from strange reasons to have the RIP working accross the devices ( 5 MTik 750s) i have to specify on some of the manually with witch router board device to exchange routing tables. Between 4.13 and 5.4 versions i this it. After tha...
Hi Can somebody tell me cause i start getting upset on this a little, The problem is every time i discover a subnet on my LAN ex 192.168.8.0/24 i get a bunch of empty ips, with two or three services in them. I HAVE NO IDEAL FROM WITCH DEVICE THEY COME FROM? IT messed my diagram with squares with ip ...
Hi I have 5 MT RB 750 one is 750G the gate way with 4.13 RB OS version the rest is 5.4. I have RIP over those 5 MT RBs , and sametimes i can log to them with and sometime i can not. And rip shows 16 HOPS . Now i came down to the point that i can only log in to my 1st router and RIP stop working enti...
Hi I have 3 routers connected in chain styles 750 MT Rboards, 1st one has ETH1 to internet and eth5 to next one, and 2nd MT 750 eth1 has connected to 1st MT and on eth5 is connected to 3rd mt. 3rd mt has 1st eth connected to 2nd mt. Lets preten that the routers have default config just small ip and ...
Hi Few 1st thx, for your help, regarding the Nating on main router. Ok, My question is do you also enable UPNP on the main router so the let say VOIP and VPN works plug-n-play style? so you don't have to do any special port forwarding, opening port etc. Do i have to have the UPnP enable on the main ...
Hi I want user to be able to sign up with diffrent profile/credits for different customer. Ex 1: Browser url: 192.168.1.1/user/signup=customer1 you can select time/price 10 USD 20 USD 25 USD Ex 2: Browser usl: Browser url: 192.168.1.1/user/signup=customer2 you can select time/price 22 USD 33 USD Ex ...
Hi I wan to have three signup pages ex; Customer A: signup page with prices: 1) $5 plan 2) $7 plan 3) $10 plan To choose from Customer B: signup page with prices: 1) $15 plan 2) $17 plan 3) $20 plan To choose from Customer C: signup page with prices: 1) $20 plan 2) $27 plan 3) $40 plan To choose fro...
Hi I got three customers with public id ex. "one", "two", and "three". The signup in settings and customer profile are checked for all three. Now, when i type http://routerip/user/signup=one OR http://routerip/user/signup=two OR http://routerip/user/signup=three it disp...
Hi I have dude installed on linux Ubuntu 10.04 64bit, i run it with WINE. The problem i am having is that any time i do my local LAN scan 192.168.8.0/24 it doens't detects and layout any devices on my lan. I checked the option to lay out the found devices once founded. I works perfect on windows XP ...
HI I use example to better explain myself. i have 4 450 boxes conected in chain each one have hotspot subnet ex. 192.168.1.1/24 - (4th) 192.168.4.1/24 and three routes ex. 172.16.1.1/24---- (3rd) 172.16.3.1/24. (for connecting 3 boxes 750s) Rip works ok at this point. Then i have disabled pptp clien...
Hi What i want to accomplish is to tunnel from one end of the RIP network PC or MTik box to other MT that has PPTP server on it so the PPTP client and server are on the same Subnet. ( My goal is to have the client and server PPTP on the same subnet ex. 10.10.1.1/24 ) with RIP for now. I could achiev...
So if i have Layer 2 user isolation on the hotspot, and i have 30 users on my Ubuquity AP or Mikrotik AP, will the one or let say 20 user using uTorent, with all users in 0.5/.250 down/up package bring the entire hostspot network down? Will hotspot only give to those uTorrent users max their bandwit...
Hi Can some body tell me how P2P traffic can affect all people on Hotspot, is this due to connection? download?, upload?, CPU usage? Why one customer with constant P2P usage (ex. uTorrent client/server) effect my Hotspot users? Let say he is on 256/128 up/down package? He can not get more bandwidth ...
you should be able to ping the Gateway ip ( hotspot ip ) if not you should check the ARP config on that interface, should be "enable" if you want to get ping replay,
Hi I was hopping i will get some of the MT support personal involved in this post. To have feed back from them, how the Hotspot Radius Client and User manager communicate. Base on my experiances and testing i can tell that the Radius User Manager does always defaults to the 1st one that was created,...
is your user manager and hotspots on the same hardware/box? They look on the same IP address. Anyway. Let say i am a potential customer and i see you have hot spot service in the neighborhood. i see free broadcast SSIDs from you AP. Service 1 ( 1Mbit), Service 2 (2 Mbits) , and Service 3 (3 Mbs). I ...
What do you guys use instead user manger? and how that works in routing isp environment?
Looks like User Manager Was designed for Bridged WISP/ISPs. Can
Here is the output from Radius 433AH MT Box IP: 192.168.2.2 Few, I did as you recommended, just for 2 first hotspots, with the loopback bridge interfaces. here is the log output from Radius ( User Manager ) IP: 192.168.2.2 : P.S didn't work, couldnt log in, but my NTP client started working thou, :)
Haven't finish reading your post few but i thx , for you people striving to fix this issue. MIKROTIK should tell this to people about it, that it only work in bridged Network scenario ONLY. few: i already have the Virtual/loopback interfaces no bridge but just reagular extra IPs on standar Ethernet ...
Getting back to user manager. This is the err msg when i try to add next hotspot behind the same IP address. See the image below for details. btw: i copy the image from other post but the it is the same thing i get. How you people solve this problem? Do you quite Mikrotik User Manager and switch to ...
I have tried everything to accomplish that. U say it is possible can you put more details what you mean is possible. I think the same is just no one in the whole world knows how to do it. I upgraded to User Manager 5.8. Still the same problem when adding router with the same IP on second or 3rd User...
I have the same problem like you guys, it has been like that for the past 2 YEARS, no answere. The only think you can do is get new MT rb with User Manager for each Hot Spot. Or teach yourself freeRadius, Check all my post in the past to find more info about it. here is one recent link. http://forum...
Hi 1) I have 3 hot spots running on my MT 750G box ( Level 4.13) , ok 2) I have another MT box 433AH configured with RADIUS ( User Manager 4.13 ) 3) I have created 3 subscribers on the User Manager ex. sub1, sub2, sub3, with test users ex. r_user1, r_user2, r_user3. 4) I have created one radius clie...
I want to put up antenna in my neigborhood, for hotspot, I want to have good coverage EIRR 36 dbi, omni can give me this but i can put only around 35 clients on it, but shorter range around 500 meter outdoor, with 9 dbi sectors (around 65 USD each) will i get better range and performance? i will get...
When you add NEW DEVICE ( NAS ) in user Manager it only allows one unique NAS ip address, if you try add the same, User manager will not take it. I have not played with ID, real, etc. parameters, i heart it is possible but i don't know how to do it. What i have done i have had created 3 user manager...
Which one is better Three 9dbi sector Antennas or one 15 Dbi Omni Direct. ? for hotspot POP (point of presents base station ) Do you know any sector for good price at least 12 dbi i wan to use it with Mikrotik minipci card 25 dbi, that is the highest dbi wireless RBoard PCI card Mikrotik makes. Ubun...
HI I have a dilemma to see the differences ( adventages and disadventages ) between the load balancing of a 4 DSL lines with MLPPP (Mikrotik , ofSense ) and the standard load balancing TP- 4 WAN load balance router offer. Are day do the same thing? I know MLPPP has to configured on both ends And all...
Sorry for confusion. Here is my set up of WISP hotspot in prototype stage for now. ------------------------------ROUTER A -------------------------------- I have 1 dsl line 5Mbit/800kbs rb 750G, I have 4 hotspots configures behind NAT masqueraded. the hotspots subnets are as follow. 192.168.1.1 -x.x...
Thanks Yea, but you can have only unique router ip address in throughout subscribers, so you can not have Hotspot A, in -> ex. User Manager ( RADIUS Srv ) Subscribers 1, 2 and Subscriber_3. It will give you err msg: "The is address already in use" And it initial access is base on IP and th...
Thanks all for your input Checking the advised configuration. Will keep you informed. Ok, I did some testing and i doesn't work. The first thing the user manager does is, checks the source ip of the access request, if the IP is not in any of the subscribers it drops. see screen shot. below. Any one ...
Hi Fewi can you be more specific in steps how you have accomplished that? to get the by Location rather than by NAS-ID to work for more than 1 hotspot on one router? My old threads about this issue: http://forum.mikrotik.com/viewtopic.php?f=10&t=48087&p=243931#p243931 I have done it in compl...
hi According to fewi: "You can use multiple Hotspots on the same router with RADIUS - you can either use RADIUS domains/realms to indicate what users can log in where, or use the RADIUS location attributes configured in the Hotspot server profile that are sent with the access requests." ge...
FEW YOU ARE THE MAN, thanks a lot. IF WIKI COULD JUST JUST AS SIMPLE AND AS STRAIGHT TO THE POINT WHAT IT REALY DOES IN BIG PICTURE. OUR LIFE WOULD BE EASIER. THXX example you gave were more than i could expected, thanks man, P.S To find ex. USB plug in pc, is good to know where to find PC. lol. Con...
Hard to believe it, looking at it from commuter programmer point of view. I will keep that in mind. from now on. Screen shot should say enough, doesn't?
rodolf How come other manufacturers have 4 radio access points that work pretty good. but don`t have the OS hotspot etc. in them thats why they ``sucks`` Most of them use 25 dbi radios, i wounder why How bout extension ribbon for the middle slot in rb 433ah for high power minipci card ex. 1 Watt pow...
Hi Did any of you tested/tried 2 R52nM MT? its MIMO and uses only approx. 2Watts of power, compering it to R52HN, that uses 7 WATTS of power. Remember the RB433AH output power to the minipcis slots, total max is 16 Watts, so if you put 2x R52HN + any other 25dbi minipci card, the power will be not s...
Why i am getting that webproxydebug err msg in my logging? Is this error log? that means there is something wrong with my webproxy configuration? or i shouldn't worry about it?
Hi
How to enable communications between hotspot Access Points in the given image scenario. I want to ping A4 loopback interface ip on A1 access point, from A1 loopback interface on A4 access point?
1) Answere with static routes thx.
2) Answer with OSPF routing. thx
That will work in bridge WISP but not in routed WISP. Don't forget that MTik Routerboard UserManager 4.0 ( Radius Srv ) only accept Radius clients ( hotspots Srvs, NAS ) with different ip address. So, you can not have Hot spot A an Hotspot B with different ip address on the same subnet. Or you can s...
Do you add the loopback ip address to local DNS server cach? as static? in MTik RB? And again in Hotspot scenario you have to have each hotspot on different subnet, so if you have 3 routerboards with 3 hotspots ( A,B,C ) on each , and each had own subnet then you will have set the gateway ip address...
Qoute: "Another practical application is to keep your source IP consistent when using RADIUS. The RADIUS server needs to get the auth packet from the same IP every time (or you will need multiple NAS entries for the same multihomed router - a pain to maintain)" If you mean by Radius server...
Loopback address has no practical application here is why. Like you said, there has to be at least one link working (connection wire/wireless) to the device. So, you have interface with ip to connect. You don't need any loopback interface etc. since there has to be at least one virtual or physical i...
you don't have to. What i had done i created on one of the master MT RB 450g device eth5 four subnets ( 3 hotspots ) and one admin subnet = 4 subnets 1 unmanaged subnet on 192.68.2.x 3 vlans on eth5 192.168.3.x .4.x .5.x . Don not check option in vlan setting to "TAG" leave it unchecked. I...
Here are errors msg when i try to use the parent proxy, that either or uses or gets dynamic IP or static ip. I still get errs. The 450 has internet connection and NATs the other 4 ports on one which is connected the MTik Parent Web proxy. 192.168.2.2. (static ) or 192.168.66.254 (dynamic ) ANy ideal...
HI 1).All my LANs are masqueraded of format 192.168.x.y/24, 2).In test environment i got two MT RBoards 450 and 433AH. 3).450G is configure to connect to parent web proxy. I also configure firewall on the 450g with: CHould i configure firewall on 450g to direct the request to Parent Web proxy Srv? o...
Clients are pc and laptops in range of the 2.4 radio, my goal is 0.5 to 1 km radius from AP. Trying to set up in chain a hotspot in my neighborhood. 2 Radios in 5.8 and 1 radio in 2.4. What is the ultimate Mini PCI card for this 433AH unit. My goal is to get at least 500 meters from AP to AP. and 0....
the max limit of wireless mesh access point in Mesh topology ( liner ) in OSPF protocal? One more question. What is the purpuse of using loop back address on router or on access point? ex 127.0.01 and what address should i use? Does it make a difference what address i use? and why would i want to u...
Hi I am planning to set up mid size hotspot with aroun 10 to 20 APoints. What would be the IP plan with pubic and private ips? Will this work? So here's the plan: Main Internet Router Rocket M5 AP-WDS ( Future plan to use OSPF subnet of /30 or 32 for routing between Hotspot AP to gateway) ~~Wireless...
Hi Check my hotspot diagram for better understanding of the problem. Maybe you have done this or know the solution or maybe you can direct me in right way. My goal in all of this is to have multiple hotspots on one or many APs with different pricing. I tried to use 1 user manager for all of them on ...
I found the solution: that is: addresses-per-mac (integer / unlimited; default: 2) : number of IP addresses allowed to be bind with the MAC address, when multiple HotSpot clients connected with one MAC-address. Run DHCP on Hotspot server profile rather than on User Profile. Solved the problem. I can...
Hi A) I have 4 hotspot server configure: 1) Extreme55 ( Vlan55, 192.168.55.x/24) with HTTP-chap and trial user 2) Express44 ( Vlan44, 192.168.44.x/24) with HTTP-chap and trial user 3) Lite33 ( Vlan33, 192.168.33.x/24) with HTTP-chap and trial user 4) UltraLite22 (Vlan22, 192.168.22.x/24) with HTTP-c...
Hi A) I have 4 hotspot server configure: 1) Extreme55 ( Vlan55, 192.168.55.x/24) with HTTP-chap and trial user 2) Express44 ( Vlan44, 192.168.44.x/24) with HTTP-chap and trial user 3) Lite33 ( Vlan33, 192.168.33.x/24) with HTTP-chap and trial user 4) UltraLite22 (Vlan22, 192.168.22.x/24) with HTTP-c...
Thx SurferTim I tried with you advice 2 shared Users. Worked! 3 people can access trail account on each of my 3 serving Hotspot, on one computer. But:!! Since you follow the issue from the beginning, no need to explain to much. So the other alternative for this but is not exactly what is want to use...
Thank you I log in with checked check boxes such as: 1) Trial User 2) HTTP-CHAP I check log in with cookies the same results. Get Err msg: "no more sessions are allowed for user T-70:1A:04:5E:45:AB" I have 4 Hotspot servers on Vlans and Virtual Access point Configurated on my RB450G and AP...
Hi Recently i have set up on RB450G Muiltiple Hotspot with Trial users access for 5 minits, every 24 hours. I use the same pc to log in to each of the five hotspot with their trial user accout, but on the second hotspot login page window it shows my MAC address as login username and not allowing me ...
THANKS YOU SO MUCH i really appreciate your help, who ever you are. I have one more question. I planing to set up chain Mesh with OSPF. with 3 to 4 radios thats why the RB433AH looks tempting. I want to use 2 radios 5.8Ghz for up and down one one for Client 2.4 ghs. So i need two in one . The two up...
THANKS YOU SO MUCH i really appreciate your help, who ever you are. I have one more question. I planing to set up chain Mesh with OSPF. with 3 to 4 radios thats why the RB433AH looks tempting. I want to use 2 radios 5.8Ghz for up and down one one for Client 2.4 ghs. So i need two in one . The two up...
Hi Can anyone suggest high power miniPCI cards ( need to install 3 of them into RB 433AH ) with 800mw to 1000mw of power. I need 3 of them to be installed inside mikrotik RB433AH. I need cards that support 801.11 a/b/n ( seperate or all in one). ( MIMO optional ) Price suggestions are also welcome. ...
Hi Can anyone suggest high power miniPCI cards ( need to install 3 of them into RB 433AH ) with 800mw to 1000mw of power. I need 3 of them to be installed inside mikrotik RB433AH. I need cards that support 801.11 a/b/n ( seperate or all in one). ( MIMO optional ) Price suggestions are also welcome. ...
Hi Can anyone suggest high power miniPCI cards ( need to install 3 of them into RB 433AH ) with 800mw to 1000mw of power. I need 3 of them to be installed inside mikrotik RB433AH. I need cards that support 801.11 a/b/n ( seperate or all in one). ( MIMO optional ) Price suggestions are also welcome. ...
Hi Assuming i have 10 APs MT RB433UAH connected with WDS and OSPF/Static Routes. Ok? and The all are connected on 801.11A (54Mbps), ( 3 radios, minipci ) . There are 10 simultaneousness users connected to each AP. What would be the backhaul bandwidth between the last two APs ( 9 and 10 ) Thank you
Have you tried Horizontal Polarization Antennas ? between your Core antenna and Mesh Access Points? This will eliminated the interference since most of them are 2.4 Ghz in Vertical Polarization so it interfare with your mesh and Core antenna signals. The biggest problem that i am facing is that 2.4 ...
Hi What is the prime reason of having on MT or other miniPCI cards 2 MMC connectors for 2 antennas. (two antennas on 1 radio). They can be configure to TX, RX, or Both. What that does and why would i want to use it, and where? What is that good for? and why would anyone use it. Can i use this for Me...
Hi Can you force/program/trick Mikrotik RB Radio to have 2 radios with 1 antenna each acting as a mesh access point set up in daisy chain. This is Mesh WISP Routed with OSPF with 2 x MIMO N backbone 5.8 Ghz. ( full dublex with Ubinux 600 mw MIMO ) I want on each hope ( Mesh access point) to have cli...
Is 25 dbm on the MiniPCI card/radio enough for Mesh Access point? I can not find antenna for mesh for 5.8 Ghz more than 5dbi below 1 foot length? Or should i get this radio? with high power MiniPCI 500mw. Will this radio work with MT RB? 411 xxx ? and will i be able to configure the RX and TX for ea...
Hi Does any of you have experience with MT hardware MiniPCI Radios used for Mesh access points? Is 5.5 Dual Band Omni antenna good enough for Mesh (any suggestions here)? Is its 25 + 5.5 dbi = 30.5 Dbi ERP output power, isnt to low? in a city ? How far will i need to set the next MT Router board Mes...
So you mesh MT Apoint power is i assume 25 db + 8 db antenna = 33 db total output level. The maximum output level is 36 db alowed in US and Canada. I have deliberant dual with 9 DB omni. Asus SOHO Access point has beter signal level that the Deliberant AP, ( weak signal ) And they say it is COMERCIA...
So i guess i got to be 1 Meter LOL ( mikrotik ) i see Wireless Mesh access point on the road and they are about 6-8 Inchecs length, NO 1 METER LOL, ANy suggestion?
I guess it problem got to do with http server that serves pages of itself and only him can check if the page should be server or its url re-writed or change protocal to https. But we dont' have control over http serve in MT rb.
Does any of you know or used any small ( up to 1 foot) mesh 2.4 and 5.8 omnis that i can use with R52Hn Radios? Base on R52Hn specs i will need antenna with 12 dbi power output.
I saw one but that antenna was 12 dbi and 1 Meter LONG lol . And where can i get them/buy
Can i do the trick with firewall filter ? Is it possible to check for domain name request and if that the request occurred trigger the address re-write to https?
or something like that, i am not good with firewall in MT.
Hi I have hotspot set up on mt rb 750g and i use Paypal for payments. Also i user certificate with godaddy. for mydomain.com. My internal ( lan address ) i have subname.mydomain.com on my hotspot so user 1st time they open the browser that is what they see. I have set up in User Manager to accept pe...
Hi I can not see any computers in my windows workgroupe. I can ping other pcs but that's all, I can not browse them in my Windows XP workgroup list. Those 2 pc are connected to Mikrotik 750 G routerboard. Here is my configuration From RB: ----------------------------------- admin@MikroTik] /ip firew...
this is my Edited/corrected version for runing servers on my LAN and allowing access for in and out of my LAN users. I run Mail Server, FTP so far. They all works? WANT EMAIL???? lol :) 1 chain=dstnat action=redirect to-ports=8080 protocol=tcp dst-port=80 2 ;;; masquerade hotspot network chain=srcna...
mikrotik staff. I don't know if you can explain this. Like i already mention that i masqueraded Local to Local address so people on my LAN 192.168.88.1/24 can brows and send mail. I set up mail server and on the PC runing the main server i can send and receive the mail but when trying to send and re...
Hi I got only 2 /ip firewall rules ( general ) to do this and works with FDQN. 1. I masquerade the local IP ( subnets) 2. I do port forwarding to my LAN servers ( ftp, smtp etc. ) Here is the code: ------------------------------------------------------------- Flags: X - disabled, I - invalid, D - dy...
Hi Hi heard that MIMO antennas can work only 1 antenna at a time? So is this True MIMO, or some other type? So, I can have 1 PCI network card for Ex. R52Hn ( 1 Radio ) with two antennas, in the same Band but configure to TX or RX or Both? Are you sure? I hear you can do this with routing protocol OS...
Hi RouterBOARD R52Hn miniPCI network adapter has two antenna connectors. Does it mean i can have two antennas one ex. 2.4 and the other in ex. 5.8 ?. Or those connectors are for smart antennas like ex. Dlink SOHO Router 655 Model, has 3 but only 1 send/receive at any given time. Is this the same wit...
Hi I want to force users to access user signup page and user page, and user manager page with HTTPS. instead HTTP.? How can i do this? I fund in this forum this: --------------------------------------------- <html> <head> $(if server-address == '192.168.101.1:80') <meta http-equiv="refresh"...
Everthing work like it should. I just change config setting on modem switched from Cable to DSL and now i had to configure PPPoE client with Static IP in Mikrotik RB 750G on the Eathernet0 interface. Everything work OK, the hotspot etc, so fare, but i noticed that all the ICONS in hotspot under each...
Hi Can some one explain me why i got the Exclamation sign (!) just before hotspot server configuration icon? I changed ISP from Cable to DSL and i change my gateway from Static IP to Dinamic IP ( PPPoE client on my Gateway Eth1 port MT 750G RB. And even all the server profiles got eh Exclamation sig...
what is you network design diagram guys? do you use 801.11 N? in there? and all behing NAT? Are you POPs are behind NAT or use Static Internet IPs? 2nd ---------------------------- Is it dificult to set up dual back haul? How to set MT RB to have one antenna for upload the other for download? for G ...
Thanks a lot for you help 1) Thats a lot of good material to read and implement. I have a question. I will have in future 3 connection from the same ISP they say that i need MLPPP to have the 3 connection to work for me ant router flash with Tomatto firmware on client side to get this to work. 2) My...
thanks, Bye the way, what is the max of DSL lines bonded? is 7 to much? And can i do the MLPPP on Router flashed with Tomatto Firmware and then do load balancing on only 2 cables one that goes to cable modem the other that goes to Tomatto Router with ex. 3 DSL lines.? What do you think will this wor...
Is it possible to user RB 750G for load balance connection. I just want to know if this going to work. to have 3 DSL connection in MLPPP plus cable connection let say 10mbps. Can i do load balancing with those 4 lines. I am newbie sorry if that to easy question to some. Thanks in advance
I assume that PPPoE is good setup when you user CPE devices, instead in shorter range pc or laptops that are good for Hotspot when let people buy sign up, do all the work by them self.
I think you misunderstood me. I want to have this automated with out my intervention. User gets option to select somehow the down/up 1/4/.1/2 , and 1/2by1 , how can i allow users to sign up or be able to sign up for those plans? Or they stuck with just the Default profile when they sign up? Only One...
hi INFO: MT RBoard 759g Level 4. , 4.10 packages I would like to share my issue that i came across within Hotspot and trail user loging. Can you check if you have the same problem with Trial User accounts login in hotspot? The problem is when i enable trial user that will terminate session time out ...
Which of those setups would you recommend and why?
I have just standard hotspot configured with 4.10 Test User Manager ( many problems with this UM version , DON"T install it is betta ). I see lot of people use the PPPoP for hotspot. Should i use that to?
Hi 1. First Download Scenerio I tested with iperf with 2 PC runing winXP LAN IP/SUBNET 192.166.0.0/24 Note ( DLink AP N B G mode for Client NICs "network interface cards " 2. Second Download Scenerio I tested with iperf with 2 PC runing winXP LAN IP/SUBNET 192.168.55.0/24 NOTE: I user Asus...
I installed lately the new 4.10 UserManager_Test and notice that it is vary unstable product. It reached to the point that the whole hotspot doesn't work, it just hangs, doesn't let users to log in, nor trail users. I must disable hostpot so people can browse for FREE.
THAT IS NOT POSSIBLE 200mbs . You must miscalculate something. I got like approx 15/16 meg down/up. I AM REALY PISSED OFF. MIKROTIK SUCKS. MY 10 year old SOHO router is faster with up/down i gives 50 meg up/down.
Hi I can not get into signup page for the new user manager_Test 4.10? URL: http://router_ip_OR_doaminname/signup?user=admin it takes me to user home page. 2nd: ----------------------------- I can not change the logo for User manager. When i specifiy ex: /mylogoUM.gif it shows me broken image placeho...
2nd. How do you install that on MT RB 750G ? i upload all the four files cause i didn't know which one, and NOTHING. Still the same User Manager the old one. I rebooted, restarted still the same.
Hi Which one for RB 750G? 4.10 MIPS-BE http://download.mikrotik.com/userman-te ... mipsbe.npk MIPS-LE http://download.mikrotik.com/userman-te ... mipsle.npk PPC http://download.mikrotik.com/userman-test-4.10-ppc.npk X86 PC http://download.mikrotik.com/userman-test-4.10.npk And 2nd: =================...
Is this normal for this device? I thought i will get at least 50 Mega Bits Up and 50 Mega Bits Down, Doing bandwidth testing Up/down at the same time. And i get around 18-21 Megs up and down. I am cable connected to Eathernet port 4 on the RBoard, When connected thru Accuss WL-520UG access point i g...
Hi I i tried that too. Didn't work. I did a few days testing with different config, but was not giving expecting results, so i sticked to the working setup. That is: LAN: http://wireless.mydomain.com ( users log in without https ) plain text, i know, it is unsecured For signing up new users they hav...
Hi luis No man. I already have done those steps and i am HAPPY cause after hitting a wall with my HEAD finally i GOT it why is not working the SSL and now works like a hours. LOL So pay pal OK etc. Now i have issue to get the https ONLY for website ex: www.mydomain.com, mydomain.com, my domain.com/u...
Hi Is it possible for hotspot users ( signing up onces ) to pick/select what up/down package they want to buy? or this can be done some other way? As of right now i have MT RB 750g with Linkys WL-520 AP for testing. I use only Antennas from the Access point the rest is controlled by MTik. My goal is...
Is it possible to have /user page or /userman page accessible only with https? I mean to force user to use secure https connection rather than regular http?
Hi I got on my Lan ( hotspot ) side domain that works with certificate that users access with url: https://mydomain.com. This is a secure login page, OK? Then Once user logged in and wants to see the user page, he/s has to enter the following url: http://mydomain.com:808/user. My question is: How co...
Hi I have check the walled garden urls and i copied and pasted them form mikrotik wiki, so should be ok right? with wan IP in there as well.? After successful payment and clicking the "return to merchant" i get redirected to usermanager user page this is the url: https://skynetisp.com/user...
Hi I managed to get it to work the certificate and godaddy.com ssl tool for checking my ssl certificate. I tried to get sign up with my new user let say: gossl , but the same results. like at the beginning i got email from paypal thou. : Hello Please check your server that handles PayPal Instant Pay...
Hi I erased all the certificates and started again. I fallowed the steps from wiki: Importing certificate Certificate file can be then uploaded to the router and imported with command /certificate import file-name=... The command should return certificates-imported: 1 private-keys-imported: 1 files-...
i mean router board device that has USB that i can plub external RAID 1/0 hard grive (SATA). Is this ok set up? if yeas advice me what router board unit name and what external hard drive? If no how can i store it ? stand alone web proxy with RAID hard drives? Is the Rb 1100 unit good for 500 clients...
Thanks so much for caring, so far it is like Black box with no solutions, yes i do it is 4.5 ver , level4 750g mt rboard you can try to log in to user payment profile with user name: dan no password, to see what is happening i create the user manually for login in ok. Should port 433 be open on my W...
Hi I have the same problem like you guys. Users get created payments ok everything ok but you can not log in with that user name that what created by paypal. I did all the thing what wiki says. you can see yourself that https works, it just doesn get data from paypal to activate the user with the cr...
accout ex. mike gets created in user manager but the credit is not added to the account just zero 0, blank space is assigned to the user, and you can not log in with that user name in the login page. Help, thanks guys. P.S i delete everything from return address box in subscriber/customer ex. admin ...
Hi My configuration: Cable ISP ----> MTick Rboard 750G Port 1 ------- > Linksys WL-525GU Access Point Port 2 ( in bridge mode everything is disable only i use the antennas for wireless clients) The problem is that after clicking th "return to marchant" button i get this error: ------------...
Hi Could you guys give me some advise/suggestions on web proxy MT RBoard hardware device with level 5 or 6. I will use it as the core/main web proxy. Would be great if i can connect external SATA drive with mirroring drive that i can swap if 1 of them fail. Or at least with high GIGA flash stick har...
You guys are right but i need this for my main Access point Dual 2.4 and 5.8 radios. See network design map: ISP modem-----> MikroTik RBoard 750g ====> 4 VLANs trunk port connected to Vlan support Access Point ( main, base station AP Dual) ==== each vlan connect wireless thanks to WDS to POP AP ( po...
I want to have an Access Point connected to the trunk port of the MT RB 750g port 5 ( with 4 vlans) so i can have each of Access Point 4 total be on separate vlan to minimize broadcast traffic.
Looks like it is to complicated to have access from each vlan to internet.
I want to change/add etc. the defual standar home router set up for internet sharing configured on my MT routerboard 750g. I want to share the internet connection with VLANs : port 1: used for WAN port 2: used for VLAN 20 port 3: used for VLAN 30 port 4: used for VLAN 40 port 5: used for Trunk port ...
Hi I bought new MT Routerbr 750g box. I got the basic configuration done on the box to have so i can connect to internet. Basically i use i port 1 for WAN ( internet ) and the rest ports ( 2 to 5) for private LAN. I use firewall configuration to connect LAN to WAN and vi-verse. Now i want to use 2 V...
Hi I managed to share internet for home use on the 750 MT rb. with NAT configured. That is 1 WAN port for internet and 1 master LAN port with 3 slave ports and DHCP server for LAN. What i want to accomplish is to have configure trunk port ( bonding ) let say on port 5 with 4 VLANS. And each port on ...