MikroTik

helectro

Hi buy one Rb L41G-2axD I upgraded from 7.8 to 7.12and the Wireless interface disappeared, what should I do to get the wireless interface back? Install wifwave2 package (from extra packages). Next time use built-in upgrade feature which upgrades all installed packages automaticalky. Thank You Very ...

helectro

Hi buy one Rb L41G-2axD I upgraded from 7.8 to 7.12and the Wireless interface disappeared, what should I do to get the wireless interface back?

helectro

If that is the case, we are doing it locally, but our network like everyone else's, the network is not local, the question I have is how long it will take to really put these routers to work, we already have several in our hands and not even if I will appear on the arm64 web and for the stable versi...

helectro

Upgraded an RB5009 Turn Off and no return, I have takeoff the plug and plug again and Turn on Ok is very It is very worrying to take it to a mountain more than 100 kilometers away and that the electricity goes away and does not return until someone goes to turn it on again I think the first impressi...

helectro

I have a question to connect 2 dish antennas, one in 5ghz and the other in 2ghz, how do you connect it with only 2 rpsma connectors?

helectro

+1 again

helectro

Greetings, I imagine it is late, but recently we are installing our first ASN granted, we are reading many post with problems in BGP, and the same as you said that version 7 is the solution but they are tired of waiting https://forum.mikrotik.com/viewtopic.php?f=2&t=122604&p=603074&hilit...

helectro

+1 me too still

helectro

I put a jack to have a second entrance, and a direct plug to connect the power supply with UPS meanwell 27 V. since the port 13 but never worked again, no link does not turn on the router I have the suspicion that accepted the 27 V? and not just for a whim, it is because I am running a UPS with al...

helectro

Hello. Adav, pukkita thank you very much for your attention Multi port passive POE http://www.ebay.com/itm/Multi-port-passive-POE-power-injector-for-8x-Ubiquiti-OpenMesh-Mikrotik-Tranzeo-/221738905598?pt=LH_DefaultDomain_0&hash=item33a0ab2ffe on port 13 the green LED is always on, and does not a...

helectro

on web http://routerboard.com/RB1100AHx2 Supported input voltage 10 V - 28 V But •User Guide http://i.mt.lv/routerboard/files/rb1100ug.pdf 12-‐24VDC;PoE on Ether13: 12-‐24VDC so work or NO with 27Vdc? I want to connect to Mean Well AD-155B specifications: AC-DC Enclosed power supply with UPS funct...

helectro

take my money how much a pair for a test with 2 or 2 RB911G-5HPnD sxt

helectro

Well done MikroTik!
RB953GS-5HnT From Tower Fm is Great use SFP instead of UTP
I will change many 433ah from my backbone if your processor is more faster

CCR1009 =looks great

mAP= looks great to sell with of service

QRT G= want But 5GHz maybe 23 dBi or More

helectro

(http://meraki.cisco.com/solutions/presence).=WiFi with Facebook Login

this would be great if you could do with mikrotik

helectro

+1 another vote 1 less

helectro

you see more?
is for this reason that beg for More Directional Antenna in CPE=less noise

Site survey with Omnitik
Sorry for me little English

helectro

Great Job!! for me that I liked the RB912G OUTDOOR-- (have metal shield?), R11E-HPND- ( Maybe someday, you can put in 433 dual core) CRS But, were in debt. a more directional antenna cpe +21 db. :( SXT HG (just out of curiosity Why do that much work to making equipment with just 1db more? ) Sorry my...

helectro

that good news lite products, but we need the AP, because the SXTG-5HnD has 32MB RAM 400MHz CPU speed when the CPU has Lite5 SXT cpe speed 600MHz 64MB RAM
so that the CPE has better performance than AP!
I guess we should be coming soon new products

helectro

Many of us are waiting for devices like rb433ah, rb2011, rb450g with dualcore or 2x faster CPUs....3 years and more and no change....Why? I have many 433AH with more than 4 years working very well, I want to change only the backbone, just for tranquility that already have been working on, and I hav...

helectro

+1 For higher gain SXT (25dBi).

Would also love a 16 port GB POE switch/router otherwise I am going to have to settle for tough switches.

+1

helectro

I agree with WirelessRudy. We need a CPE with more gain (like nanoBridge 25dB) Also in the kit, we need a simple serious bracket to adjust the vertical tilt. The poe included would be better with a integrated led (for check the eletrical presence) If possible a version with shield (price high .. ob...

helectro

rb750 128 HDD this is real or is it a bug?

helectro

I update one 493AHG, now I can not add an APC ups, please someone could send me the link where you can download 5.19
Thanks for your help

helectro

Beware rb450g just upgraded one of the version 4.17 to version 5.20 and stopped responding, this team is at 52km away, on a mountain to raise in 4x4
sorry for my bad English

helectro

I hope to see soon something like AirMax NanoBridge M5-22 with similar price

Giuseppe

+1 or one sxt with 25dB

helectro

same problem 433ah 5.20 and omnitik and sxt, Although not a major problem'm used to measure the quality of link with

P Throughput

helectro

recently installed my first 750UP with 5.18, and evidence on the table that works great with a 433ah +2 r52n and a rocket M5 old, but when attaching a new rocket with mac address 00:27: the new rocket restarts constantly someone can verify if the new rocket are the some the problem, that I have one ...

helectro

the problem is scsi disks, I have a worked well for over 2 years Dell SC1425 with SATA disk

helectro

http://routerboard.com/RBSXT-5HPnD

Now we are moving.

Waiting for SEXTANT with the same output power !
Mikrotik,
23dbi antenna and metallic enclosure please. Fedup with plastic. 16 dbi with that much power is a low requirement. High antenna gain is needed more. Sextant is a bit short.

+1

helectro

make sure you are connected to port 1

helectro

hi, Ignacio something must be wrong, I have a 30Km link XR5+ant29 db +433AH in 30Mbps

helectro

the 433AHU
now is connected by jack a dc power supply 24V/1A
what happens if connect a POE and also let the current through the jack

be burned?
or work as DC BACKUP?

Sorry my poor English

helectro

routerboard: yes
model: 433UAH
serial-number: 1E44019DB2E6
current-firmware: 2.29
upgrade-firmware: 2.29

Same Problem reboot cause 1 every 2 hour aprox!!

routerOS 5.5

any idea?

helectro

I had some time to play with my 3.3VDC idea and it worked! A simple jumper from the 3.3VDC pin to the USB pin was all it took to get the RB493G to recognize the APC UPS. So, it looks like all our RB493G routers will be getting this modification in order for our APC UPS monitoring script to work. Do...

helectro

You're a lifesaver! Haven't backed up the configuration and vpn certificates, I don't know what I would do without you. Changing these capacitors from another RB750 made the trick flawlessly. Btw. new RB750's doesn't have these capacitors anymore. thank you is a pleasure to hear that someone else h...

helectro

see what I mean (both way wrong and one way is OK)

helectro

Where do you see that in your screenshot? It shows "arrow down" (download), and in the incoming column in DU, at 35Mbps. That's RX, received. The router shows 35Mbps TX at the same time.

is correct but shows btest tx?
btw! sorry for my little English

helectro

thank fewi for you answer

When Btst from the pc shows tx in the router should show rx, the error is (on the pc TX 30 mbps and router TX 30 mb ) is that the error is equal to pc route TX TX

helectro

Error in direction when placed both way, when he says rx is actually is reality tx, and vice versa, testing Windows 7 when it is in one direction for both rx and tx is ok

helectro

Hi surfertim, me to interesting to be beta tester or even developer thank

helectro

see This
http://forum.mikrotik.com/viewtopic.php?f=3&t=45610

helectro

Thank fewi Now is clear for me

helectro

see this
http://cgi.ebay.com/10-Wired-Wireless-B ... 45f55bc5f3

helectro

Thank Fewi
yes i have many x86 but i dont Know where put this comand wrote
in terminal interface ether and no see where??

helectro

All LED lights on without any Cable
change the capacitors and FIX

http://www.flickr.com/photos/54467413@N ... 7794/show/

helectro

If set to no, what the routerboard will do if the connection is fail? i was thinking this possible can solve the ethernet halt issue or not. Hi where put No the options is /interface ethernet> .. : blink disable enable find monitor reset-counters set / mirror comment edit export get print reset-mac

helectro

bafh appreciate the help and had tried that but it did not work with continuous traffic from that ip to the wan of my MT I have not managed to block traffic in Rx and before applying these rules and the cpu was at 100% I had to disconnect the cable port to prove, with several rules including Mt try ...

helectro

Hi guys, appreciate any hint I have an incoming traffic to the public IP address of Mt I could not block I put a quee to the source IP address 89.28.59.104 and 4 put firewall rules in the input and output foward even I have 2,5 Megas in RX from this ip with many packages of 122bps PD inbound ip ping...

Search found 48 matches