Hi, I'm running ROS 7.12.1 OSPF/MPLS between CCR1036-RB5009-NP16P, I would like to allow via LDP to pass only necessary loopback IP addresses 10.254.200.0/24 , by using /mpls ldp advertise-filter add advertise=yes disabled=no prefix=10.254.200.0/24 vrf=main add advertise=no disabled=no prefix=0.0.0....

VXLAN stop working between 1036 and netpower over OSPF, on FDB getting remote IP's zeros on both sides

Check on scripts section

Hi to all, a client called me than something going wrong on his 1009 router which is running on latest 6.42.3 version.
By logging in i found two dumpded files on files directory and lot of changes in configuration
Any ideas???

Hi there, after the upgrade of some clients CCRs something going wrong with hotspot. When clients successful login there in internet connection even not redirection
By disabling hotspot everything work like charm.Any similar issues?

Same issue with me, the ethernets 2-5 flaps ,on both rb 750 3years old!

Hi to every one, Iam trying to do a port forward from my wan port of my vpn router,lets say wan ip address 1.2.3.4 to a remote site connected to this vpn router with address 10.1.1.0/24. The clients are connected thru pptp vpn and all are mtik devices,for sure has to do mangling the traffic with int...

this is the complete firewall filter rules except if you need to post and nat and mangle rules as well.

Tnx Rudios for reply,
you mean do add only this one?

/ ip firewall filter
add chain=forward in-interface=Local out-interface=Local action=accept comment="allow traffic"

I am trying to find a solution with this configuration which for some reason don't work properly with some https sites like mail.google.com and with some banks as well here is the firewall configuration /ip firewall filter add action=accept chain=input comment="Accept established connections&qu...

solved!!

Tnx for reply,
the problem is that in bridge under ports i have bridge ethe1 and Eoip interfaces and i can't add second bridge withe new EoIP and the common bridge port

Hi all, i trying to establish several EoIP tunnels. Searching the forum i found this topic http://forum.mikrotik.com/viewtopic.php?f=2&t=30217&hilit=multiple+eoip but is not clear to me, i established 2 tunnels with bridged interfaces ( @wiki) and working well, but what about if i want to ad...

Tnx for reply, the configuration is very simple. on ether10 (rb 1100) is the 192.9.200.0/24 network which has 2 pc's with 192.9.200.110 and 192.9.200.111 but the tunnel sharing the remote address which is on the first post and my local 10.0.248.0/24 the 10.0.248.0/24 is given nowhere in my router so...

Any Help?

You can run a pptp client on 3g routers connecting to your routerboard vpn server. There is a script to update your dyndns address.
This working perfect with me, no NAT not port forwarding.

Hi there, i just made an ipsec with cisco router but i have some problem with NAT. my local address is 192.9.200.0/24 (this subnet is given from vendor and cant change it) on ip sec IP policy src address is 10.0.248.0/24 and dst address is x.138.39.16/29 on firewalling is add action=accept chain=src...

Thanks for immediate reply! i have mark the outcoming traffic but i didnt the same with the incoming traffic i ll check it!

Hi all, I would like to ask you help with the follow issue : I have to different adsl modems connected to two Ethernets of an RB 750G (dsl modems are in routing mode and not acting as bridged mode) i have only access from the Internet to this adsl connection which is the default route and not from t...

it were 4.4 if i remember well, i have 10 users running on userman , i dont now if I need to remove complete the older userman database. I try to this one to upgrade because it have only few users

I just upgrade the RB-411AR and i have an issue with userman : fail to add profile or limitation : the Primary key must be unique

Thank you very much Sergejs!

Hi there,
Iam using the rb 600 and iam running two hotspots servers, the first one is on wlan and the second on eth1, my question
is if could the first server working with the remote userman and the second with the local one.
Now is working with the first on the top list of radius servers
Thank you

Hi,
I have a strange problem, when I am enabling the hotspot on wlan1 (10.50.51.1) and DHCP server on wlan1 10.5.51.2-254
i cant login even with Trial account. On log i see: user failure no address from ip pool
Any ideas?
P.S when disabling the hotspot server everything is ok.
any ideas?

Thank you for replaying, This is that I've done, but when the hotspot is activated its broke the connection, probably one solution is to find a way to allow the wds ip;s in this case 192.168.51-2, or to create separate hotspots server in each wlan interface but hens probably the roaming doesn't work...

The problem is that for example when the hotspot server is activated on wlan and iam tryng to bridge the both interfaces wlan1 (AP) and wds interface the hotspot and dhcp became inactive, so i activated the dhcp and hotspot in wds interface.
Without hotspot server working great

Hi all, I met a problem during my try to make a transparent wds bridge between 2 RB-500series on the first RB i have activated the dhcp and hotspot server on wds interface. the wds is bridged with the wlan 2 which is the backbone for the second routerboard the procedure is like described on wds tran...