I have deployed many DMA installations. There is no performance difference for bandwidth using DMA , userman or whatever radius you uses. Its upto your NAS/Mikrotik who maintain bandwidth management. DMA is just a radius, it can send bandwidth attributes, rest is done by your NAS,Mikrotik. and yes ...

Hi I am using mikrotik x86 & device as radius Client connected to DMA Radius, users are complaining that when connected via radius they are experiencing bandwidth fluctuation instead of DMA radius, if UserManager been used users are working fine. The Main idea of using DMA Radius was to have cen...

Hi

Recently we have been facing issue with hotspot/PPPoe Installation. Many users are complaining that facebook/google/youtube/msn sites are not loading properly. Images doesn't show up. The issue is still in 6.9Xx too, the issue is affecting few users [Not all]. Any ideas.????

Heh, now tell me fella, what use is for MT to usar them programmer hours for freeriders pleasure on free product when their flagship product and ROS still runs full of bugs like my ranch neighbor dog ? If anyone asking me, I sure want them to fixar that v6 and CCR issues damn fast instead of fiddli...

I have a CCR 1036-4S, connected the same with 2 WAN-BGP Static Route. On initial upgrade once Bandwidth cross 130Mbps mark, its drops for few sec and comes back, after a reboot currently after working for few Min it Hungs. Currently changed it back with 6.6 , and under observation.

Hi I have a BGP Setup where on wan side i have Two ISP and as a client apart from static IP client, we have one BGP client too. The problem been faced is Upload flows via only one ISP, if Policy routing been enabled packet starts flowing fine, but Clients connected directly on CCR doesn't work {BGP ...

Hi Need help in configuring my 1100AHX2 Scenario : I have Two Wan Connections WAN1=45Mbps WAN2=20Mbps.Currently Running PPPoe & Hotspot on Interface=7 , Public IP Clients connected to Interface=4 & 5 VoIP Server on Interface=9 Requirement is I wish all the public IP Customer to Take WAN 2 an...

Hi I was trying to free icmp from shaping, which was working on earlier versions, but on 6.XX i am find even though packet is getting marked, /queue tree is unable to capture it. especially on pre-routing. [Mikrotik@MikroTik] /ip firewall mangle pr Flags: X - disabled, I - invalid, D - dynamic 0 cha...

you have to use 5.x or 6.x on a 1100. I did not think your problem is related to 5.x or 6.x. I have checked with others who are running on x86 system with 5.21/5.24 , issue even persist for them too. Its resolves, if i do a ping to the site which is not opening , it pings fine { ie facebook,youtube...

Hi i have an RB1100AHx2 , need to know does it support 4.17, as its not accepting 4.17 even via net Install. Issues been Faced with 5.xx and 6.XX are a) Many webpages doesn't open for few Hotpot/PPPoE users [ Have to Assign Direct DNS in order to work at client end] b) Stops browsing for hotspot use...

Hi

Same thing happened to me.....even via serial boot options not showing.....any ideas....to fix it.

Do you have pptp or ipsec enabled on the router itself? Perhaps data is getting caught by that instead of forwarded away properly.

Nope nothing...been enabled

Double check in your filter rules that you have an allow entry for Related as we as Established connections. I am using the following firewall rules http://wiki.mikrotik.com/wiki/Protecting_your_customers but with limited ports on block [25/135-139/445] . Yes i has a rule to to allow related and es...

What kind of VPN are they using? IPSec? PPTP?

both are there

I have tried allowing 47/50/51/500/4500/1780/1723/49000 ports

How have you done that? 47, 50, and 51 are IP protocols, not ports.

47 is gre /50-ipsec-esp/51-ipsec-ah

Hi, I am using mikrotik as an hotspot/pppoe server, the problem i am facing currently is users are not able to connect to there office VPN. VPN gets stuck during authentication process of it. I have tried allowing 47/50/51/500/4500/1780/1723/49000 ports but no use still the issue persist. Please hel...

Hi

I have a Mikrotik server acting as PPPoE server for LAN Clients with radius. We have installed gaming server in LAN for clients, LAN users are not abling to access it due to PPPoE. Is there anyhow i can allow LAN traffic [without been counted on radius...]

Regards
Sankar

Hi We are running PPPoE server for lan client with radius integrated, initial days it used to hung or doesn't allow lan traffic. Finally we have upgraded Hardware with 4 core Xeon server with 4gb RAM to run around 500+ client. Instead of Hard Disk we use SATA flash drives Currently using Mikrotik Ve...

Thanks, i have seen this earlier, here i am not using routerboard, it been installed on a x86pc with two LAN cards..

Hi Sorry if this question was asked before, I am getting a wired error while trying to configure Hotspot. Apart from the intial IP [10.5.50.0] none other IP are working. The settings are getting saved, even DHCP server allocates IP from new pool [ex 10.50.55.0], but while trying to ping gateway [EX:...