This is happening on dozens of my boards, as discussed by other users. This is a hardware/software issue. Older boards do not get packet loss, drop in bandwidth between two boards via ethernet, mismatch in ethernet link status and port flapping.. You see, this is the problem. I can find dozens of po...
Do you think it would be possible to maybe stop entirely what you folks are doing in terms of advancing ROS with new features etc... I think the most at this point that ROS users wish for in 2012, is that all resources in MT engineering solve the current problems that ROS has been having since the i...
Have 3 XR5s with 24v 30 Watt power supply. Have another 435g with 3 XR5 plus sr71-15 with no issues, same power supply. Will try and send file, but nothing ever gets resolved with these port issues which is even more serious for me.. I will try but my hopes are very low. :( Im starting to replace so...
Still multiple rb 411's and 433ah's that reboot due to watchdog failure when running any 5.x software. Firmware always updated to most recet.. Roll back to 3.30 and its smooth sailing. Thius happens on all kinds of setups. Rb's connected to other RB with same verion ROS or different, auto on or off,...
I have the same problem.. been running a main router on 3.30 for years. graphing resets every 12 months. Now with ros 5.6 on rb1100, the graphs reset after a reboot. yes it is set to store on disk.. ?
I also can confirm that on a couple of my 433AH's, ROS 5.8 maintains CPU at 100%. This only happen once firmware was updated to 2.37. Going to downgrade
Nope.. been using MT for about 6 years now..with a few hundred units deployed. I should know how to get into the darn thing via winbox.. Happened immediately after upgrade.....
Just upgraded a 433AH from 5.4 to 5.6 due to random lockups... Since upgrade yesterday, i can no longer log in via winbox.. Winbox goes to retrieving preference then there is sometimes a ultra fast flicker of winbox opening (thats what it seems) and all disappears. Even after a reboot no luck.. I ne...
Just my 2 cents on this disconnection thing.. I have been a long time complainer here when I have had some issues... I have experienced these control frame timeout disconnects before and o one important link in particular.. Although no one seems to be able to explain what the msg actually means, it ...
I have a few links in NV2 that have saved me from interference... There have been one or two links where the environment has not allowed NV2 to work at all.. Even the link tweaked and tweaked to no avail.. I have alos seen that in my case im so use to using nstreame everywhere that in a difficult si...
MT would really get some serious kudos releasing this. A simple script to add to our hotspot html that useres requested. Would create some good buzz for MT.
Its a free upgrade. Just update your 133 to 4.17, then update to 5.xx
*4.17 seems to be the safe cause if you update to a lower 4.xx the CPU stays at 100% and its hell on earth to do anything on the board when this happens.
SHAME ON mikrotik for removing my post about this issue.!!!! I was going to paste the link to a previous thread i created about this problem, but MT has deleted it I would imagine due to its title. It was titled " Petition to remove 5.xx as stable release!" I had some good info in there as...
Do you think its possible to take 5 mins and plug to RB's together and to the test? As I have just downgraded my production links back to 4.17 to resolve this issue and im not taking the chance to re upgrade all the RBs just before everyone starts work here soon in my city as I am a commercial provi...
Link provided in previous posts in this very thread.. Instead of taking the time which is appreciated to retrieving previous comments about this issue and similar issues with ROS 5.XX, why not take a few mins and re create the problem as described in my last post.. This seems like a more efficient s...
Well my apologies. If any of you folks have a chance to review some posts complaining about ROS 5.2 and serious loss of packet loss, this would be appreciated.
Try to re create issue as I have on numerous different boards.
Forget trying to be formal about this.. There is nothing to send over in a support ticket.! Just read latest posts here http://forum.mikrotik.com/viewtopic.php?f=2&t=51251&start=50 as well as some others around the forums.. I am able to re create this issue on a number of RB433's and 493's a...
Read some of the latest responses from your posters.. Packet timeouts on ethernet ports from RB 5.XX to RB 5.xx and RB 5.xx to different vendor ethernet ports.. As many other posters have said.. There is No supout file created and no log entries other than ethernet link up and down and link staus as...
As it is clear ROS 5.2 is NOT a stable release, I request that it should be removed from stable status. I have lost my customers confidence since the 5.XX stable release's. MT must learn what the word STABLE means. Why are they not able to test out there version properly before issuing a stable stat...
HI.. Strill green around the edges with routing. I have a ptp link to a client. In my routes I have 0.0.0.0/0 going to gateway 192.168.38.1 I have now installed a second radio receiving another link from NOC with different a .2/29 to it from NOC What would I do as a route entry to enable these futur...
After several days of errors and problems in regard to ROS 5.xx on RB1100 and RB433's Our main issue was ping timeouts and watchdog reboots to neighboring routerboards after ROS 5.xx upgrades. We have been through all the "stable" (LOL) 5.xx release and we have choosen to stick with 5.0. W...
sorry for reacting quite heavily, but I have had this setup working for the past two years with the x386 as main router going to the rest of my 433's.. Since ROS 5.xx all hell has broken loose.. I just clearly dont see what the hell the point is of calling a release STABLE when its pretty much one o...
I have done that. I have also changed ports on the 433. Problem seems to have been resolved by taking the RB1100 and throwing it off the 5 floor into the parking lot. Put back in service older 386 core router ROS machne and all seems back to normal.. MOST LIKELY CAUSE of me loosing a once perfect re...
Two main routers. 10.1 Main Router new RB1100 watchdoged to ip of fiber switch - No problems with watchdog to that address no reboots 10.2 Second router RB433AH (replaced with RB433 as thought previous board was defective) in the line up as important takes data from outside to inside. 10.2 keeps reb...
Added http://pagead2.googlesyndication.com/pagead/show_ads.js to walled garden. Cannot seem to get the code for adsense to work in hotspot portal page (login.html) PLacing the code here and there it actually showed up once. Tried placing code elswhere to get better page layout and since then no go.....
If there are no immediate log entries after a reboot, its also nice to see in the logs exactly what time a router rebooted instead of having to calculate the uptime.
I actually have 3 XR cards in 2 rb433ah's. Not something I wanted to do, but was caught on a cold cold day with a customer that HAD to go up, and only had XR's in stock whereas usually in this situation I would have used a Mikrotik card as the 3 rd radio. Its more than a tight fit. I cant remember w...
Thanks This link is 500meters, I can see the other side and signal is perfect (-60) I think it's v4, if I downgrade teh link is stable, put v4 on and its disconnects twice a day or so. Perhaps v4 is faster in the lab, but it's definitely more sensitive imho. :-) http://forum.mikrotik.com/viewtopic....
Hardware retries has nothing to do with it.! 4.x + on most links that were running 3.30 flawlessly got to hell.! Its like one installed a completly different brand of board and radio.. The tx/rx levels go crazy when with heavy traffic.. When the link is idle the numbers are like with 3.30, so one t...
did you follow what I suggested above? search the forum for hw-retries There are no problems with wireless in newer versions, but on some links, settings need adjustment. Hardware retries has nothing to do with it.! 4.x + on most links that were running 3.30 flawlessly got to hell.! Its like one in...
Figured id try a couple N cards on a new link so I figured id give the 5rc1 a try for shi%ts and giggles.. Not a production link yet, so figured id be good to play for a couple days.. My entire network is running 3.30 flawlessly. Added one N card to a production board that also has an XR5. Long stor...
Im a dumb ass when it comes to BGP stuff and advanced routing.. Have this new customer that will be put on a separate fiber connection. Will deliver last mile via Tik. He needs to peer BGP with us for his /24. We do not have BGP on the fiber connection we want to put him on. Do I just get my fiber p...
Anyway the crash occurs when entering Wireless > wireless interfaces > (interface) > advanced or monitor status It happens either on 3.20 or 4.11 This is the same as I was seeing. I was connecting to units that have 4.10 & 4.11 +1 iPhone 4 have not been able to get into those areas. Pleaseeee s...
Yup! Crash's everytime I hit monitor status and advanced. The only usable real time data it gives without crashing is monitor traffic. . Darn it, was really hoping to use this to align antennas up on towers...