Hi, I recently tried to update my x86 routers from 5.22 to 6.6 and after all I need to roolback to 5.23 =( reason: on all my x86 routers I have installed Intel PRO/1000 PT Dual Port Server Adapter's and driver in system do something strange 1. If manual Ethernet speed is setup to 1Gbps, real speed i...

routeros rc7 tilegx when 3 fullview bgp instances are processed simultaneosly router crashes and rebooted but when i enable one instance after another giving each of them time proccess routes it works great until bgp flap is this known issue ? or i need to submit support.rif ? same problem i noticed...

Hello i have small problem i need to have specific routes in separate routing table > i need to mark routes from one bgp instance > and give those routes to another bgp instance > > with first routing filter i place all incoming prefixes to "temp" > routing table > > with second routing fi...

bypassed problem via dhcp relay and L3-switch static routing
waiting for new release and new minor bugs

bay the way where i can post new futures suggestions ?

yes ip dhcp-server /ip dhcp-server> export /ip dhcp-server add add-arp=yes address-pool=185 always-broadcast=yes authoritative=yes \ disabled=no interface=vlan185 lease-time=1d name=185 add add-arp=yes address-pool=3001 always-broadcast=yes authoritative=yes \ bootp-support=static disabled=no interf...

none of the above =(

topology of all dhcp servers
ethernet ===> vlan1 ===> <=dhcp-server

topology of bridge i use
ethernet ===> vlan2 ===> BRIDGE <=== eoip tunnel

it's multi-purpose router
i use PPP VPN DHCP static-routing BGP VLAN KVM
and also bridge , but not for networks that dhcp servers is in

please tell me what part of config i need to export here
because full config is realy huge

Successfully upgraded to 5.7 x86 intel core i5 - 2 days up with no problems i started notice this since RC versions of ros 5 and unfortunately this problem persist in 5.7 version =( so after reboot my system starts normally , but all or few dhcp servers is marked red. i try to change configuration b...

andrijco you have full BGP feed there?

2 full views and one local country view

you can do in clause /ip route print where 192.168.86.1 in dst-address [TOTORO@Core0-Wenet] > /ip route print where 192.168.86.1 in dst-address Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # ...

on demo this is MIPS architechture [demo@demo2.mt.lv] > ip route print count-only where distance=110 2 [demo@demo2.mt.lv] > ip route print count-only where distance=0 0 value of distance out of range (1..255) [demo@demo2.mt.lv] > and on demo it works but second answer is strange maybe it's because m...

i don't know if this "bug" present in 5.0rc6
i recently downgrade version to 5.0rc5
simple queue functionality it's little important to me
so i ask the community =)
please test this thing in current development version

who can test if on 5.0rc6 works command like this: /ip route print count-only where dst-address "0.0.0.0/0" on 4.6 this command gives result in few seconds on 5.0rc5 result is infinite processing without any reslut "helps only ^+C" if this is a bug how to report ? few of my scrip...

hello how to propertly downgrade to version 5.0rc5 if i installed 5.0rc6 from CD ? i try to add .NPk files from older version and issue command /system package downgrade , but after system rebooted is still rc6 version and simple queues broken, i also try to disable ipv6 package and after Shutingdow...

hello it is possible to start scrips on this kind of events
i try to search some info but i failed =(

Please give me some new ideas =)

solved it's my mainboard issue
replaced to new one and everything ok now

Hello a have strange problem in router installed two NICs 1. Intel Server Adapter PRO/1000 PT (82572EI) 2. Intel Dual Port Server Adapter PRO/1000 PT (82571EB) (82572EI) -- works perffect (82571EB) -- in low loads (pinging another host) works fine when i try to load NIC pings sudenly stops with time...