Community discussions

MikroTik App

Search found 180 matches

by soulflyhigh
Mon Sep 26, 2022 9:36 am
Forum: Announcements
Topic: v7.6beta [testing] is released!
Replies: 226
Views: 61620

Re: v7.6beta [testing] is released!

† *) radius - require "policy" policy for "login" service configuration; Nooo.... 😥😥😥 Unfortunately you have noticed it... I have always used it to scale permissions and become an administrator even in RouterBOARD which I did not have administrative access... Now than the pandor...
by soulflyhigh
Wed Oct 06, 2021 7:47 pm
Forum: Wireless Networking
Topic: PTP BETWEEN LHG5 AND DYNADISH 5
Replies: 7
Views: 1832

Re: PTP BETWEEN LHG5 AND DYNADISH 5

That should work just fine, could you post WLAN config's export from both devices?
The link is either misconfigured or there are some hardware-related issues.
Regards,
M.
by soulflyhigh
Sun Jul 26, 2020 5:46 pm
Forum: Wireless Networking
Topic: LHG XL HP5 configuration issue
Replies: 7
Views: 2629

Re: LHG XL HP5 configuration issue

Well, that is strange. What is the RouterOS version on that LHG? In the production environment use only latest long-term version (at the moment 6.45.9). Try to run "/system check-installation" and see what happens. One more question - after you lose connectivity with that LHG have you trie...
by soulflyhigh
Thu Jul 23, 2020 6:53 pm
Forum: Wireless Networking
Topic: LHG XL HP5 configuration issue
Replies: 7
Views: 2629

Re: LHG XL HP5 configuration issue

Hello,
you should set ip address to the "bridge1" interface.

Regards,
M.
by soulflyhigh
Sat Apr 11, 2020 3:48 pm
Forum: Announcements
Topic: v6.47beta [testing] is released!
Replies: 269
Views: 179745

Re: v6.47beta [testing] is released!

we discovered another issue present in RB4011 (ARM) and all version up to beta54: - when there is an eth with speed at 100mbps - the traffic on the this eth reach the maximum and the interface queue is full All the traffic through the router is fully compromised like to one ethernet queue is the li...
by soulflyhigh
Thu Dec 19, 2019 10:38 pm
Forum: General
Topic: MY ISP ARE BEING LEECH (SOS)
Replies: 4
Views: 1815

Re: MY ISP ARE BEING LEECH (SOS)

Hello, I would suggest that you carefully read this page https://wiki.mikrotik.com/wiki/Manual:Securing_Your_Router and then review the actual configuration of your router because you might need to correct some parts of it. The recommendations from that page should be enough to protect your router a...
by soulflyhigh
Thu Dec 12, 2019 11:15 pm
Forum: General
Topic: MY ISP ARE BEING LEECH (SOS)
Replies: 4
Views: 1815

Re: MY ISP ARE BEING LEECH (SOS)

Hello, I think your router is most likely being used as an "attack bot" against other networks. Check if you have open DNS, Proxy, FTP or NTP services or ports on your router. Also, when using "Torch tool" you can see type of the traffic by selecting "Port" and "Pr...
by soulflyhigh
Wed Aug 21, 2019 11:47 am
Forum: General
Topic: 100% CPU load in CCR 1009 [SOLVED]
Replies: 22
Views: 7834

Re: 100% CPU load in CCR 1009 [SOLVED]

Please check Tools>Profile and then click on the Start button.
It will show which process is causing high cpu usage.
Then you can check what is going on with that specific process.

Regards,
M.
by soulflyhigh
Thu Aug 15, 2019 10:25 pm
Forum: RouterBOARD hardware
Topic: 900 MHz Metal 9HPn alternative solution needed - help
Replies: 6
Views: 6775

Re: 900 MHz Metal 9HPn alternative solution needed - help

Well, there is Cambium PMP 450i line but it is NOT budget friendly (their AP radio alone is something like 3k USD, CPE/SM radio is around 300 USD). UBNT also has some older generation 900MHz radios but I never had oportunity to use them, they are cheaper than Cambium but still not even close to Mikr...
by soulflyhigh
Thu May 30, 2019 3:35 pm
Forum: Beginner Basics
Topic: Hide username
Replies: 2
Views: 1410

Re: Hide username

No, that is not possible in RouterOS. Mikrotik programmers probably could do it in some future software update. But, I have to ask, why would you need to hide it anyway? Can you explain what you really want to achieve by hiding it? If someone can see or record your computer screen or telnet/ssh term...
by soulflyhigh
Tue Apr 02, 2019 11:25 pm
Forum: Beginner Basics
Topic: Problem with PIA VPN
Replies: 3
Views: 1618

Re: Problem with PIA VPN

Hello,
which software version of RouterOS is running on your Mikrotik router?
Also, are there any other active settings in firewall (post results of "/export hide-sensitive" command).

Regards,
M.
by soulflyhigh
Sat Mar 02, 2019 1:12 pm
Forum: General
Topic: For those people graphing signal strength
Replies: 1
Views: 764

Re: For those people graphing signal strength

Hello, to me this looks like a specific weather issue. Temporary signal level drops over long radio links are usually caused by severe weather conditions and weather differences across the signal path. Thermal inversion causes refraction of the radio waves with such high signal level drops. The long...
by soulflyhigh
Sun Nov 18, 2018 12:16 pm
Forum: Wireless Networking
Topic: My rb133 can't update the license
Replies: 5
Views: 1548

Re: My rb133 can't update the license

Hello alex911, regarding the license problem you should contact Mikrotik directly at support@mikrotik.com . Keep in mind that RB133 is very old and slow model (mips-le platform is EoL/EoS, isn't supported in software since RouterOS v6.33.3) Also, there were some very serious security related issues ...
by soulflyhigh
Fri Jun 29, 2018 10:12 am
Forum: Wireless Networking
Topic: Nv2 High latency
Replies: 29
Views: 10198

Re: Nv2 High latency

What are the signal levels of those clients?
How does the 5GHz spectrum looks at those sites, is there any other AP nearby?
Could you post a screenshot of registration table from AP side?

Regards,
M.
by soulflyhigh
Wed Jun 06, 2018 11:45 am
Forum: General
Topic: {vulnerability }unauthorized login from chinese ip
Replies: 2
Views: 1171

Re: {vulnerability }unauthorized login from chinese ip

What does the log says exactly? Login via web,telnet, winbox or ssh?
by soulflyhigh
Wed Mar 28, 2018 1:23 pm
Forum: General
Topic: Ping Spikes Through all SFP+ ports on CCR1072
Replies: 3
Views: 1465

Re: Ping Spikes Through all SFP+ ports on CCR1072

That is a costly solution.
How much traffic goes through that CCR1072?

Regards,
M.
by soulflyhigh
Wed Mar 28, 2018 1:13 pm
Forum: General
Topic: Please add basic portScan tool ( port scanner scan )
Replies: 80
Views: 47127

Re: Please add basic portScan tool

Yes, please.
+1
by soulflyhigh
Sun Mar 25, 2018 7:51 pm
Forum: General
Topic: RouterOS making unaccounted outbound winbox connections [SOLVED]
Replies: 75
Views: 145760

Re: Aggressive RouterOS worm infecting our network?? [SOLVED]

Nathan, RIF and if possible remote access is possible? RC on these or not?
I just sent you a supout file from one of remaining infected SXTs to Mikrotik support email.
Let me know if I could help with this problem.

Regards,
M.
by soulflyhigh
Sun Mar 25, 2018 1:11 pm
Forum: General
Topic: RouterOS making unaccounted outbound winbox connections [SOLVED]
Replies: 75
Views: 145760

Re: Aggressive RouterOS worm infecting our network?? [SOLVED]

Hello Nathan, we have seen it last night too, mostly on 6.34.x version, SXTs/LHGs - mipsbe. I managed first to block the telnet traffic to and from them and then I updated them to latest current version 6.41.3. All affected Mikrotik routers had public IPs and exposed common service ports (80,21,22,2...
by soulflyhigh
Wed Mar 21, 2018 9:35 am
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 114841

Re: Significant improvement for wireless Nv2 PtMP

In the setup we had a R11e-5HnD as AP and Clients was SXTsq Lite5
In BAND - N? Channel width? 40Mhz? TDMA = 2ms or AUTO? More info about config please...
band=5ghz-a/n channel-width=20/40mhz-Ce un TDMA - 2m
What was the distance between the AP and SXTs?
by soulflyhigh
Tue Mar 20, 2018 3:49 pm
Forum: Announcements
Topic: Significant improvement for wireless Nv2 PtMP
Replies: 245
Views: 114841

Re: Significant improvement for wireless Nv2 PtMP

Hello Uldis,
this is the test with 802.11ac or 802.11n radios?
Could you describe in more details signal levels and hardware used?

Regards,
M.
by soulflyhigh
Mon Feb 26, 2018 2:24 pm
Forum: General
Topic: Routers' "hard drive" chip. Is it possible to read information from it?
Replies: 5
Views: 1496

Re: Routers' "hard drive" chip. Is it possible to read information from it?

Well, unless the chip is encrypted then it is theoretically possible to read it with appropriate electronic and software tools. The question is, would you consider yourself a "target" for someone with such advanced equipment and knowledge? If you really need high level of security then you...
by soulflyhigh
Wed Jan 31, 2018 11:26 am
Forum: Announcements
Topic: MikroTik News February 2018 (Issue #80)
Replies: 64
Views: 36021

Re: MikroTik News February 2018 (Issue #80)

waiting for that 16 ports poe switch!
+1
by soulflyhigh
Tue Nov 28, 2017 12:34 pm
Forum: SwOS
Topic: rb260gsp does not pass traffic
Replies: 2
Views: 2480

Re: rb260gsp does not pass traffic

Hello borregote,
try to update firmware to the latest stable version.

Regards,
M.
by soulflyhigh
Tue Nov 14, 2017 12:57 am
Forum: Wireless Networking
Topic: building a 1 Gbps wireless link for 2 Kms.
Replies: 10
Views: 3267

Re: building a 1 Gbps wireless link for 2 Kms.

There is a real reason why such hardware costs 5000+ USD per link. R & D costs are huge and it takes a lot of time. I believe that most of Mikrotik's costumers are "budget oriented" and in that sense I can understand why Mikrotik doesn't invest in such expensive technology (yet). One d...
by soulflyhigh
Mon Nov 13, 2017 1:39 pm
Forum: Wireless Networking
Topic: building a 1 Gbps wireless link for 2 Kms.
Replies: 10
Views: 3267

Re: building a 1 Gbps wireless link for 2 Kms.

You would need 200+ MHz of very clean 5GHz band to achieve that capacity and that is with bonding two links in parallel. Realistically that much of free 5GHz band isn't something available in most of the places today. 2km link for 60GHz is most probably too long (at least for 1Gbbps capacity). There...
by soulflyhigh
Mon Nov 13, 2017 4:31 am
Forum: General
Topic: License question: ROS 4.5 to 6.xx
Replies: 9
Views: 2615

Re: License question: ROS 4.5 to 6.xx

I wouldn't worry yet about that unicorn called ROS 7 :)

In one of the latest ROS v6.41rc50 on RB433AH there is no license restriction limit in upgrade-to-version at all.
Capture-lic.PNG
So, really there is no reason to avoid upgrade to the latest stable version.

Regards,
M.
by soulflyhigh
Sun Nov 12, 2017 11:26 pm
Forum: General
Topic: License question: ROS 4.5 to 6.xx
Replies: 9
Views: 2615

Re: License question: ROS 4.5 to 6.xx

Basically, you have to do it in two steps.
Upgrade it first to 5.26 and then you should be able to upgrade to latest 6.xx version.

Regards,
M.
by soulflyhigh
Tue Nov 07, 2017 3:51 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 207656

Re: v6.41rc [release candidate] is released! New bridge implementation!

*) wireless - added passive scan functionality (CLI only); Any info on this? It does scan but it isn't passive. "/interface wireless> scan 0 passive=yes" and the wlan is disconnected immediately. @Mikrotik Is this the same issue that this works only with pure 802.11 protocol and not with ...
by soulflyhigh
Mon Nov 06, 2017 4:24 pm
Forum: Wireless Networking
Topic: NV2 sync issues and solutions
Replies: 91
Views: 18652

Re: NV2 sync issues and solutions

I agree, Nv2 sync obviously needs more development so it could become something usable. After that, good documentation/practical user guide would be a next thing to do. At this moment I don't believe neither will happen anytime soon - but I hope I'm wrong about that. Otherwise, it shouldn't be in RO...
by soulflyhigh
Mon Oct 02, 2017 11:13 pm
Forum: Wireless Networking
Topic: Wireless Sector Capactiy Planning Question
Replies: 7
Views: 2412

Re: Wireless Sector Capactiy Planning Question

This is outdoor fixed wireless backhaul. If I have a customer who adds X amount to their allowed upstream on the backhaul circuit (i.e. there's a layer3 break between the customer's actual LAN and this wireless link) and I allow 3 more Mbps on their upstream-facing queue, and they start using it, w...
by soulflyhigh
Sun Sep 24, 2017 2:54 pm
Forum: General
Topic: Validity of MTCNA & MTCRE certifications
Replies: 11
Views: 10819

Re: Validity of MTCNA & MTCRE certifications

Bump! I've recently got MTCTCE (in February 2017) and my MTCNA expires by the end of 2017. This policy about re-certification (for MTCNA at least) is really pointless. Most of the questions at the MTCNA exam are not RouterOS-specific (probably more than 80-85%). MTCNA > Course prerequisites: The stu...
by soulflyhigh
Sun Sep 17, 2017 9:09 pm
Forum: General
Topic: CCR temperature reading problem
Replies: 3
Views: 1692

Re: CCR temperature reading problem

Well, then try to visually inspect it and see if there is anything that looks suspicious at the PCB (leaked electrolytic capacitor could do further damage). If you're not familiar with electronics take it to your local electronic repair shop for inspection. As isolated component the temperature sens...
by soulflyhigh
Sun Sep 17, 2017 3:06 pm
Forum: General
Topic: CCR temperature reading problem
Replies: 3
Views: 1692

Re: CCR temperature reading problem

Most probably some kind of hardware problem with temperature sensor.
I would suggest you to contact Mikrotik support or your distributor about RMA.
https://mikrotik.com/rma
by soulflyhigh
Wed Aug 23, 2017 9:22 pm
Forum: Wireless Networking
Topic: 2x2 MiMo 802.11 N on 900MHz
Replies: 19
Views: 5570

Re: 2x2 MiMo 802.11 N on 900MHz

These are Atheros based cards, should work under ROS.
https://vizmonet.com/nm2-series

I have absolutely no experience with this manufacturer ... so you should really test them first.

Regards,
M.
by soulflyhigh
Wed Aug 23, 2017 1:58 pm
Forum: RouterBOARD hardware
Topic: wAP 60G - Vague timeline?
Replies: 9
Views: 4421

Re: wAP 60G - Vague timeline?

https://fccid.io/TV7WAPG60AD/Test-Report/RF-Test-Report-3521245 Three channels 1 - 58.32GHz 2 - 60.48GHz 3 - 62.64GHz channel bandwidth 2.16GHz integrated antenna gain 10.56 to 13.48dBi depending on channel Peak power limit : 500mW (27dBm) Lowest data rate 27.2Mbps Highest data rate 4620Mbps PSU > 2...
by soulflyhigh
Thu Aug 17, 2017 4:21 pm
Forum: Wireless Networking
Topic: NV2 sync works but destroys performance
Replies: 8
Views: 3079

Re: NV2 sync works but destroys performance

WirelessRudy, I agree with everything you said, and I don't think that Mikrotik's sync will be a viable solution for p2mp in the current form. Cheap CPEs are radiating in various directions significant amounts of RF energy and in urban environment reflections are causing even lower SNR. We're using ...
by soulflyhigh
Wed Aug 16, 2017 10:57 pm
Forum: Wireless Networking
Topic: NV2 sync works but destroys performance
Replies: 8
Views: 3079

Re: NV2 sync works but destroys performance

Can you check with the snooper the clients signal from the other AP? That is most probably the cause for performance-drop issue. All the CPEs from one AP simply MUST have very good isolation from other AP(s) and vice versa. If sync could work on different channel (as we know now is working only wit...
by soulflyhigh
Fri Jul 21, 2017 8:52 am
Forum: Wireless Networking
Topic: SXT Lite5 with ubnt-APs problem
Replies: 2
Views: 1038

Re: SXT Lite5 with ubnt-APs problem

There is not enough information about your configuration and network topology for anyone here to give you any specific answer. Please provide more details and if possible exports (without sensitive parts like passwords etc.) from all of your Mikrotik routers in data path from the end clients to your...
by soulflyhigh
Mon Jul 03, 2017 3:38 pm
Forum: Wireless Networking
Topic: SNR question
Replies: 4
Views: 1417

Re: SNR question

- Try to set wireless protocol to "nv2" at the AP side and to "any" at the station side (I presume that this is point to point link). - Update ROS to 6.37.5 on both sides (or newer bugfix release). - Signal levels are "too hot", reduce output power until you get signal ...
by soulflyhigh
Mon Jun 26, 2017 12:09 am
Forum: RouterBOARD hardware
Topic: New SXT sq Lite5 - RBSXTsq5nD [SOLVED]
Replies: 12
Views: 7266

Re: New SXT sq Lite5 - RBSXTsq5nD [SOLVED]

Installiert AC Access-Points and Sell AN CPEs Makes no sence for me
True, that's why we're using almost exclusively 802.11n APs and CPEs.

We're also looking for something "new" to replace them in the future but that for sure won't be 802.11ac equipment.

Regards,
M.
by soulflyhigh
Sun Jun 25, 2017 9:16 pm
Forum: RouterBOARD hardware
Topic: New SXT sq Lite5 - RBSXTsq5nD [SOLVED]
Replies: 12
Views: 7266

Re: New SXT sq Lite5 - RBSXTsq5nD [SOLVED]

What we have in .ac with ROS > - no finer manual data-rates control - no spectral scan + higher price Also, SXT/LHG has 10/100mbps only port so even if you're lucky enough to get more than 100mbps over radio it is limited by fast ethernet port. IMO the end goal is the lowest price possible for low-e...
by soulflyhigh
Tue Jun 20, 2017 11:16 am
Forum: General
Topic: PTP Antenna !!
Replies: 7
Views: 1867

Re: PTP Antenna !!

24GHz p2p radios are made for this kind of situations (high throughput at short distances), it is unfortunate that you're not allowed to use them. If EIRP regulation in Germany allows it and the 5GHz spectrum is clean between those two sites you might take a chance with airFiber (AF5, ask more detai...
by soulflyhigh
Sun Jun 18, 2017 9:51 pm
Forum: RouterBOARD hardware
Topic: Require information about electronic component of RB1100AHx2 [SOLVED]
Replies: 10
Views: 4241

Re: Require information about electronic component of RB1100AHx2 [SOLVED]

It might be an inductor (3.9 uH) but if the noise is the only problem I wouldn't be worrying much about it. https://www.eevblog.com/forum/projects/hissing-inductor-cores/ Quick google search also gives this result http://www.techtrans.com.tw/smd_power_inductors2.html?CID=7 however only Mikrotik know...
by soulflyhigh
Thu Jun 15, 2017 2:16 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released!
Replies: 231
Views: 77448

Re: v6.40rc [release candidate] is released!

If the APs are very close together then yes. At the moment the current implementation works only on the same wireless frequency. We could think how to sync the APs that are on different frequencies but located on the same tower and connected to the same ethernet network. That is exactly what we nee...
by soulflyhigh
Sat Jun 03, 2017 11:31 pm
Forum: Wireless Networking
Topic: nv2-downlink-ratio
Replies: 6
Views: 4352

Re: nv2-downlink-ratio

Actually, the only news here is ability to control download/upload throughput ratio - and that, as I said, works (mostly) as expected. For p2p you could get more with old dynamic ratio because with new fixed ratio there is max 80% "per side throughput" limit. In my example, with dynamic ra...
by soulflyhigh
Sat Jun 03, 2017 8:09 pm
Forum: Wireless Networking
Topic: nv2-downlink-ratio
Replies: 6
Views: 4352

Re: nv2-downlink-ratio

Milestone for Mikrotik. One p2p link 80/20 works nice. Soon test p2m. What's throughput difference for dynamic and 80/20 ratio? It works as expected in our test setup, download and upload throughput are just restricted to desired ratio. If the throughput with dynamic ratio is 100mbps half duplex th...
by soulflyhigh
Tue May 16, 2017 5:49 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released!
Replies: 231
Views: 77448

Re: v6.40rc [release candidate] is released!

*) wireless - added option to change "nv2-downlink-ratio" for nv2 protocol (CLI only); *) wireless - added option to set "fixed-downlink" mode for nv2 protocol (CLI only); /interface wireless> set 0 nv2-mode= Nv2Mode ::= dynamic-downlink | fixed-downlink /interface wireless> set...
by soulflyhigh
Mon May 15, 2017 2:02 am
Forum: Beginner Basics
Topic: Full duplex mimo
Replies: 12
Views: 5888

Re: Full duplex mimo

@SteveWrightNZ Mikrotik unfortunately just don't have product you described at this moment. The only Mikrotik's FD radio has been announced at MUM Milano 2017 in 60GHz band so it is for much shorter distances. For this case and distance I would also recommend a product from "that other company&...
by soulflyhigh
Fri May 05, 2017 6:36 pm
Forum: Wireless Networking
Topic: SXT 5 AC vs SA5 AC
Replies: 14
Views: 3213

Re: SXT 5 AC vs SA5 AC

"SXT SA 5 AC" has 90 degrees antenna while "SXT 5 AC" has 28 degrees with 2dBi more gain. So, with "SXT SA 5 AC" you'll get 4 dBm lower signal and more interference but at such short distance that shouldn't be a big problem. In theory, it should work almost the same wit...
by soulflyhigh
Mon Apr 24, 2017 4:03 pm
Forum: General
Topic: Traffic Interception ETSI
Replies: 3
Views: 1849

Re: Traffic Interception ETSI

We had similar question a few weeks ago, this was Mikrotik's answer : RouterOS has option for CALEA. We do not have direct option that is called "ETSI xxx", however you can intercept traffic in different ways by RouterOS options (firewall/sniffer/traffic-flow etc.). So, it is possible to d...
by soulflyhigh
Thu Apr 20, 2017 11:47 am
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 174
Views: 46333

Re: AC equipment and spectral scan problem

Well, with recent competition from mobile operators, for those, who are based on MT-only networks, sad days are comming.. Clients are demanding higher throughput, simply because content dictates the need for it. I've been exploring countless of options of what to do to survive, and currently I came...
by soulflyhigh
Wed Apr 19, 2017 4:59 pm
Forum: General
Topic: Problem RouterOS 6.38.5 - Denial of Service
Replies: 67
Views: 22638

Re: Problem RouterOS 6.38.5 - Denial of Service

@svserg I have no doubt that you were under attack and that you had a problem but how big was that attack? Many of those attacks are bigger than 1gbps and they simply saturate/congest internet uplinks to the end user. How big is your internet uplink and was it congested during the attack? So, lets a...
by soulflyhigh
Wed Apr 19, 2017 2:29 pm
Forum: General
Topic: Problem RouterOS 6.38.5 - Denial of Service
Replies: 67
Views: 22638

Re: Problem RouterOS 6.38.5 - Denial of Service

1. Your PC will not have enough resources 2. Large corportate network has firewall and other protection 3. Any other network is just as vulnerable if you send lots of traffic to an open port 1. Resources enough to stop the work of the router. We tested it experimentally. 2. Mikrotik are not a firew...
by soulflyhigh
Tue Apr 18, 2017 2:00 pm
Forum: Beginner Basics
Topic: Someone claimed that he hacked RouterOS
Replies: 19
Views: 15681

Re: Someone claimed that he hacked RouterOS

Could be just an animation. Some people make these and then ask for bounty. Would be nice to see actual tool, or at least proof by anybody else. I did find "a tool" probably made by this guy > Capture11.JPG Capture22.JPG Capture33.JPG but I couldn't find login data for it (most of the men...
by soulflyhigh
Sat Apr 15, 2017 1:35 am
Forum: Beginner Basics
Topic: Someone claimed that he hacked RouterOS
Replies: 19
Views: 15681

Re: Someone claimed that he hacked RouterOS

Could anyone translate from Arabic what it says in the youtube video?
Any hint what is the actual exploit?

I think that this is the same guy > https://www.facebook.com/groups/mikrotikman/
by soulflyhigh
Sun Apr 09, 2017 3:49 pm
Forum: Wireless Networking
Topic: N vs AC
Replies: 2
Views: 1791

Re: N vs AC

To really be more spectral efficient, 802.11ac gear has to work in a lower-noise-level environment compared to 802.11n. You can either try to find a cleaner channel or invest in higher gain antennas to achieve higher SNR. Here is similar discussion > https://forum.mikrotik.com/viewtopic.php?f=7&...
by soulflyhigh
Wed Mar 22, 2017 8:06 pm
Forum: General
Topic: Transparent firewall
Replies: 5
Views: 2842

Re: Transparent firewall

A typical DDoS involves bandwidth exhaustion, you cannot defend against it without upstream filtering. By the time your firewall is inspecting the packets, your uplink is already saturated and useless. Yes, the attacker simply saturate your internet connection with gigabits/sec of "junk traffi...
by soulflyhigh
Sat Mar 18, 2017 4:09 pm
Forum: Wireless Networking
Topic: 802.11n Throughput
Replies: 6
Views: 2203

Re: 802.11n Throughput

You can use this calculator as "sanity check" tool :
http://jaunty-electronics.com/blog/2012 ... alculator/
by soulflyhigh
Mon Mar 13, 2017 4:06 am
Forum: Wireless Networking
Topic: 802.11n Throughput
Replies: 6
Views: 2203

Re: 802.11n Throughput

Hmmm, ok. But what is the purpose of a such program? Throughput in unlicensed bands (2.4 and 5GHz) is hardly predictable even if you have all the data. One of main reason for that is variable noise level from other unlicensed radios and that always degrades throughput in real life situations. Differ...
by soulflyhigh
Sun Mar 12, 2017 7:00 pm
Forum: Wireless Networking
Topic: 802.11n Throughput
Replies: 6
Views: 2203

Re: 802.11n Throughput

Are you trying to write a program or you are just using one?
Read first 802.11n data-rates specifications https://en.wikipedia.org/wiki/IEEE_802.11n-2009
That is a maximum that one could get in ideal conditions.
by soulflyhigh
Tue Feb 14, 2017 1:49 pm
Forum: Wireless Networking
Topic: 6.5km 1000mbps full duplex design
Replies: 11
Views: 3947

Re: 6.5km 1000mbps full duplex design

I don't think this is possible, at least not 1gbps full duplex with unlicensed 5GHz band - in this conditions and with Mikrotik maybe half of that is more realistic expectation. Usually there is just too much interference and you would need absolutely clean 80+80 MHz plus some more of bandwidth. Eve...
by soulflyhigh
Thu Jan 05, 2017 11:08 pm
Forum: General
Topic: PPPoE Servers - CCR 1036
Replies: 2
Views: 1617

Re: PPPoE Servers - CCR 1036

Nobody can tell you what is the problem without more details.
Upload your export configuration file, don't forget to hide/mask sensitive data.

Regards,
M.
by soulflyhigh
Mon Dec 19, 2016 6:38 pm
Forum: Wireless Networking
Topic: 90 KM Wireless Link 2700 Foot Elevation Difference
Replies: 7
Views: 2607

Re: 90 KM Wireless Link 2700 Foot Elevation Difference

If there is no other option try it with Mikrotik, you should get fairly "usable" internet connection for few home users. We had couple of Mikrotik 802.11n/ac links 60-65km long between mountain tops with 32dBi Jirous dishes few years ago but eventually we've removed them all. Signal "...
by soulflyhigh
Fri Dec 02, 2016 8:30 am
Forum: General
Topic: device with bad mask or subnet, recover workaround
Replies: 1
Views: 943

Re: device with bad mask or subnet, recover workaround

If the device has telnet or ssh service running then you can login on it from RB951directly and change network settings.
by soulflyhigh
Tue Nov 08, 2016 12:02 pm
Forum: General
Topic: Poweboxes !
Replies: 6
Views: 2128

Re: Poweboxes !

Hi, I hope I'm not the only one experiencing this issue. Around 5 times now on 3 different powerbox, the following condition occurs. All IP/Logic on the PB stops working, it doesn't respond to ping, you can't connect or hear it on mac-server, it completely dissapears off the network. The strange th...
by soulflyhigh
Fri Nov 04, 2016 3:10 pm
Forum: Announcements
Topic: MikroTik News November 2016 (Issue #73)
Replies: 27
Views: 19132

Re: MikroTik News November 2016 (Issue #73)

But im still wait for new LGH5 with 802.11ac, gigabit ethernet and industrial grade aluminium.
That will make it more expensive, but the whole point of this LHG5 device is that it's cheap.
For those willing to pay more there's a DynaDish 5 available already.
Exactly.
by soulflyhigh
Tue Nov 01, 2016 4:38 pm
Forum: Scripting
Topic: Hack by Backtrack on Mikrotik
Replies: 4
Views: 2419

Re: Hack by Backtrack on Mikrotik

Hi ;


Is there a right way to stop the hack by Backtrack on Mikrotik ?? ... I need a script or any solution. Because my networks infiltrated . pls
There is no known "remote hack" for Mikrotik RouterOS.
Please explain what exactly has happened to your network/routers.

Regards,
M.
by soulflyhigh
Fri Sep 23, 2016 9:39 pm
Forum: Wireless Networking
Topic: N-Devices (QRT5) perform better than AC-Devices (QRT5ac) in noisy environments
Replies: 4
Views: 2098

Re: N-Devices (QRT5) perform better than AC-Devices (QRT5ac) in noisy environments

The physic is the problem and there is no way around. For higher modulation rates you must have higher SNR (more cleaner channel). So in noisy environment it is actually better to use lower (manually set) rates/modulations which are almost the same in both 802.11ac and 802.11n radios. And because th...
by soulflyhigh
Wed Sep 07, 2016 12:19 pm
Forum: Forwarding Protocols
Topic: RFC2544 Test fail on VPLS circuit
Replies: 11
Views: 4064

Re: RFC2544 Test fail on VPLS circuit

Hello,
You are getting 0.1% frame loss with 128byte packet size at 500+ mbps traffic or I got it wrong ?
And there are just those two ccr1072 and 20km fiber in between?
Are you using any type of QoS or queues?

Regards,
M.
by soulflyhigh
Fri Jul 29, 2016 12:11 pm
Forum: General
Topic: Feature request: CLI hints in WinBox
Replies: 7
Views: 2661

Re: Feature request: CLI hints in WinBox

+1
Yes, it would be nice.
by soulflyhigh
Fri Jun 10, 2016 11:49 pm
Forum: Wireless Networking
Topic: Magical Speed limit on PTMP
Replies: 27
Views: 6791

Re: Magical Speed limit on PTMP

@ p3rad0x
How sure you are that this is the limit on radio and not somewhere else in your network?
It is very unlikely that you have the same problem on all APs in whole network.
What results do you get with old nstreme protocol?

Regards,
M.
by soulflyhigh
Wed Jun 08, 2016 10:12 pm
Forum: Wireless Networking
Topic: Magical Speed limit on PTMP
Replies: 27
Views: 6791

Re: Magical Speed limit on PTMP

Hi, Client with the lowest signal level quality will always have the biggest degradation potential on throughput of the ap-bridge. If you have just one client with low modulations/CCQ and he/she starts to download all other clients with good signals (at the same AP) will experience much worse throug...
by soulflyhigh
Wed Jun 08, 2016 2:43 pm
Forum: Wireless Networking
Topic: Magical Speed limit on PTMP
Replies: 27
Views: 6791

Re: Magical Speed limit on PTMP

Hello, AP side works as ap-bridge and clients as a station or station-bridge or you're using some other mode (wds, pseudo-bridge....) ? Second question, which software version is at APs and at client side (stations)? Also, which wireless package is active? There must be something with either softwar...
by soulflyhigh
Wed Jun 08, 2016 7:47 am
Forum: Wireless Networking
Topic: Magical Speed limit on PTMP
Replies: 27
Views: 6791

Re: Magical Speed limit on PTMP

Try to lower TDMA period size to default value of 2ms.

Regards,
M.
by soulflyhigh
Wed May 18, 2016 3:16 am
Forum: Wireless Networking
Topic: Will Mikrotik shoot 110 km? 66 Miles?
Replies: 12
Views: 3640

Re: Will Mikrotik shoot 110 km? 66 Miles?

With 34+dBi dishes (dual pol) and something like Netmetal/Netbox you should have a chance to get that kind of capacity with Mikrotik but it will depend on terrain profile, weather and spectrum usage on both sides. There is no way to know until you actually put it in production. If that is important ...
by soulflyhigh
Sat May 14, 2016 9:29 pm
Forum: Wireless Networking
Topic: Short link(around 30m) - hardware choice
Replies: 4
Views: 1587

Re: Short link(around 30m) - hardware choice

30 m ?? You could invest in some radios.... but for that distance I would go for full duplex 1gbps "link" for less than $100 by using cat 6 self supporting ethernet cable - if that is possible in this case.
by soulflyhigh
Wed Mar 23, 2016 1:39 pm
Forum: Wireless Networking
Topic: PtMP: abandoning mikrotik
Replies: 10
Views: 2860

Re: PtMP: abandoning mikrotik

For the price of the current Mikrotik's routerboard lineup it is hardly to expect more. (802.11 a/b/g/n/ac standard by default simply isn't optimized for long outdoor p2mp configuration). In fact, Mikrotik is very good (in its price category) but we always want more :) There are some (technically sp...
by soulflyhigh
Wed Mar 16, 2016 9:28 pm
Forum: Announcements
Topic: Newsletter 71
Replies: 66
Views: 36250

Re: Newsletter 71

In this MikroTik newsletter:

- new low-cost 5GHz 24.5dBi CPE/backbone LHG 5, $59
Finally!!!! :D
by soulflyhigh
Wed Feb 17, 2016 10:59 pm
Forum: General
Topic: Licence update problem
Replies: 3
Views: 1214

Re: Licence update problem

Yes, usually upgrade works normally. I did upgrade already on a lot of Routeros. But this is the 1st time, when I have trouble with the upgrade. Can helps me please anybody from Mirkotik? I want not throw away hardware, which is normally working, just because some licence was not succesfully update...
by soulflyhigh
Tue Feb 02, 2016 10:11 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177880

Re: v6.35rc is released, new wireless package!

background scan and repeater function can only work when wireless interface is running 802.11 wireless protocol. *) wireless-rep - initial support for station roaming for station mode in 802.11 protocol; *) wireless-rep - added support for wireless repeater mode for 802.11 protocol; *) wireless-rep...
by soulflyhigh
Mon Feb 01, 2016 8:16 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177880

Re: v6.35rc is released, new wireless package!

@ivicask It is in AP bridge mode... I tried with setting it as station, with nv2 and nstreme, tried to connect to them from different winbox/ PC... the same thing happens. Don't think I've any 2SHPN in my network to test it (99% equipment in our network does work on 5GHz band, the rest are old R52s ...
by soulflyhigh
Mon Feb 01, 2016 5:23 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177880

Re: v6.35rc is released, new wireless package!

@ ivicask Yes, that doesn't work for me on two different AP... 1st step - open wlan and click "Scan..." button (i've tried it on QRT-5 and RB433AH with UB5 wlan card) 2nd step - "regular" scan runs automatically and all clients loose connection to AP 3rd step - I stop scan by cli...
by soulflyhigh
Mon Feb 01, 2016 4:46 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177880

Re: v6.35rc is released, new wireless package!

Version 6.35rc2 has been released. Changes since 6.35rc1: *) chr - fixed high rate limitation; *) ippool6 - fix potential crash; *) routing - fixed rare kernel failure on different dynamic routing configurations; *) wireless-rep - fix nv2 protocol. - nv2 protocol seems to work now (clients can conn...
by soulflyhigh
Mon Feb 01, 2016 3:57 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177880

Re: v6.35rc is released, new wireless package!

-fp doesn't mean Fast Path, if I remember correctly, it's more like Feature pack? BTW, this wireless-rep package doesn't seem to work in nv2 mode (AP - 912UAG ROS v6.35rc1, CPEs - SXT Lite5/5HPnD v6.19-6.28,6.35rc1). Changing to nstreme - clients reconnect ok, changing to -cm2 - clients reconnect o...
by soulflyhigh
Mon Dec 21, 2015 3:11 pm
Forum: Wireless Networking
Topic: MT6.xx Nstreme+Polling disconnections
Replies: 6
Views: 2779

Re: MT6.xx Nstreme+Polling disconnections

I think it became serious issue in one of the versions after v6.23
We have almost no problems (with nstreme and disconnections) when using old v6.5 or older v5.xx.
by soulflyhigh
Sat Nov 21, 2015 1:55 am
Forum: General
Topic: locked out
Replies: 2
Views: 868

Re: locked out

Hello,
the simplest and probably the only solutions are the netinstall or hardware reset configuration.
Here you have both procedures explained at the first page http://i.mt.lv/routerboard/files/hAP-lite-qg.pdf

Regards,
M.
by soulflyhigh
Sat Nov 21, 2015 1:45 am
Forum: Wireless Networking
Topic: Bricked units after downgrading from 6.29+
Replies: 5
Views: 2079

Re: Bricked units after downgrading from 6.29+

Hi,
you lost connection to those routerboards through wlan cards or they really got bricked after downgrade?
I believe it was probably problem with disabled wireless package (after downgrade) but it depends on this question.

Regards,
M.
by soulflyhigh
Wed Sep 30, 2015 4:34 pm
Forum: Wireless Networking
Topic: Hardware Recomendatios for a 50KM Wireless Link
Replies: 5
Views: 1940

Re: Hardware Recomendatios for a 50KM Wireless Link

At 5GHz or at some licensed band?
Half or full duplex?
Required capacity?
Which type of traffic should go through the link - web surfing clients or voip/iptv or ?
by soulflyhigh
Thu Sep 10, 2015 10:42 am
Forum: Announcements
Topic: v6.30.4 bugfix release
Replies: 103
Views: 40498

Re: v6.30.4 bugfix release

Because, imagine if everybody use the "bugfix" releases, nobody would use the new releases and nobody will spot the (inevitable) bugs in those, and the new releases will never get bugfix. So, at the end, we stay **forever** with a bug-free release but with nothing new for decades :( One c...
by soulflyhigh
Wed Sep 09, 2015 1:21 pm
Forum: Announcements
Topic: v6.30.4 bugfix release
Replies: 103
Views: 40498

Re: v6.30.4 bugfix release

@normis We need at least one 100% stable release of 6.xx, with no major bugs - and yes, 6.30.4 is the best at the moment :). Some new additional features in ROS are less important for us (speaking as an WISP network administrator). Also, I agree with your new release policy except in one detail - pl...
by soulflyhigh
Sat Aug 29, 2015 12:25 pm
Forum: Announcements
Topic: v6.30.4 bugfix release
Replies: 103
Views: 40498

Re: v6.30.4 bugfix release

No. I would like a longer lasting Bugfix release without new features. Our network is no playground. Stability is number one feature.
+1000
by soulflyhigh
Thu Aug 27, 2015 12:50 am
Forum: RouterBOARD hardware
Topic: RB953GS-5HnT!!!! 3x3 MIMO finally is there!
Replies: 12
Views: 8416

Re: RB953GS-5HnT!!!! 3x3 MIMO finally is there!

@WirelessRudy Well, let's put it this way - has anyone ever seen any professional grade backhaul p2p link with more than 2 polarizations at the same carrier frequency (more than 2x2)? Ceragon (Nera), Radwin, Saf, Altai, Exalt, Cambium.... Nope, there is 0 (zero) 3x3 or 4x4 p2p products from those co...
by soulflyhigh
Thu Jul 16, 2015 2:28 pm
Forum: RouterBOARD hardware
Topic: Mikrotik DynaDish 5
Replies: 85
Views: 39203

Re: Mikrotik DynaDish 5

DynaDish is for you then. 400mm diameter, 25dBi gain. Dear Normis, for a less than 1/2 of DynaDish's price we are assembling Mikrotik based 23dBi 1x1 5GHz CPE unit (with third-party single-pol antenna). I'm sure you could do it better in the same price range and still make a decent profit. Your ass...
by soulflyhigh
Thu Jul 16, 2015 6:34 am
Forum: RouterBOARD hardware
Topic: Mikrotik DynaDish 5
Replies: 85
Views: 39203

Re: Mikrotik DynaDish 5

DynaDish is for you then. 400mm diameter, 25dBi gain.
Dear Normis,
for a less than 1/2 of DynaDish's price we are assembling Mikrotik
based 23dBi 1x1 5GHz CPE unit (with third-party single-pol antenna).

I'm sure you could do it better in the same price range and still make a decent profit.
by soulflyhigh
Tue Jun 30, 2015 1:18 pm
Forum: RouterBOARD hardware
Topic: Mikrotik DynaDish 5
Replies: 85
Views: 39203

Re: Mikrotik DynaDish 5

Would be better with L4 license. Using it as a CPE for "home users" is just overkill. The same goes for QRT-5 and QRT-5 ac (which both have L4 license and we are using QRT-5 as APs for medium range p2mp connections). Mikrotik, please make cheap 5GHz high gain CPE unit, SEXTANT is neither c...
by soulflyhigh
Thu Jun 04, 2015 9:49 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCTS WISHLIST 2015
Replies: 49
Views: 12491

Re: NEW PRODUCTS WISHLIST 2015

-Expensive and non-802.11xx based full duplex radio unit for carrier-grade backhaul links
-Cheaper QRT-5 with L3 license for CPE
-8,16,24-ports gigabit PoE switch series (CRS based)
Oh, and I forgot this one:
-The Dude 5.0, with native Linux support
by soulflyhigh
Tue May 26, 2015 12:52 am
Forum: General
Topic: Logging - problem with simple queues
Replies: 1
Views: 835

Logging - problem with simple queues

Hi, Does anyone knows a way to log changes made by an administrator to any dynamically created (radius+pppoe server) simple queues in routeros? For example, if administrator "kicks" dynamically created simple queue there is nothing in logs about that action at all?? - tested on v6.28. I've...
by soulflyhigh
Fri May 08, 2015 9:18 am
Forum: RouterBOARD hardware
Topic: NEW PRODUCTS WISHLIST 2015
Replies: 49
Views: 12491

Re: NEW PRODUCTS WISHLIST 2015

-Expensive and non-802.11xx based full duplex radio unit for carrier-grade backhaul links
-Cheaper QRT-5 with L3 license for CPE
-8,16,24-ports gigabit PoE switch series (CRS based)
by soulflyhigh
Mon Apr 27, 2015 2:44 pm
Forum: Wireless Networking
Topic: AC equipment and spectral scan problem
Replies: 174
Views: 46333

Re: AC equipment and spectral scan problem

We are also missing spectral scan... @WirelessRudy It is not a real solution but you can do a remote scan through IP telnet (doesn't work with MAC telnet). After telneting to the wireless router device (from a pc or some other router) run "/in wi scan 0" and when scan stops (after 20-30 se...
by soulflyhigh
Fri Feb 27, 2015 9:49 am
Forum: General
Topic: Feature request: Background wireless scanning
Replies: 13
Views: 5814

Re: Feature request: Background wireless scanning

Yes, +1. Background scan would be nice. If station can scan, and not disconnect from AP
+1
by soulflyhigh
Thu Feb 26, 2015 4:45 pm
Forum: Announcements
Topic: Newsletter 64
Replies: 27
Views: 18615

Re: Newsletter 64

A PowerBox without Gigabit Ports???? But Why? We need a Giigabit 5 Port / 8 Port product like that :)
+1
by soulflyhigh
Fri Jan 30, 2015 9:40 am
Forum: General
Topic: 802.11ac spectral scan
Replies: 157
Views: 53765

Re: 802.11ac spectral scan

+1
Spectral scan is a great tool for troubleshooting.
by soulflyhigh
Tue Jan 20, 2015 8:12 pm
Forum: General
Topic: Upgrade Mikrotik 3.30 to 6.2?
Replies: 9
Views: 5435

Re: Upgrade Mikrotik 3.30 to 6.2?

No, upgrade to 4.x, then you can upgrade to 5.x then you should be able to upgrade to 6.x. Mikrotik currently does not enforce the license limitation. You might just need to work around it by going up one major revision at a time. This is 100% true on Routerboard platform, not sure for x86, but one...
by soulflyhigh
Mon Dec 15, 2014 7:24 pm
Forum: General
Topic: DMCA complaints and PTP filter
Replies: 3
Views: 1757

Re: DMCA complaints and PTP filter

In every normal country those complaints are worthless without court order.
I've email filter for them, sending them directly to junk/spam folder.
by soulflyhigh
Wed Oct 08, 2014 12:38 am
Forum: General
Topic: eoip ... please help me
Replies: 3
Views: 1287

Re: eoip ... please help me

Ok, that is your network topology... 10.0.0.1 probably is a pppoe server and your clients from SW2,SW3 and SW4 should connect to it with their username/password? Still isn't clear what you want to do with this configuration, is this some kind of internet connection sharing or internet access control...
by soulflyhigh
Tue Oct 07, 2014 4:44 pm
Forum: General
Topic: eoip ... please help me
Replies: 3
Views: 1287

Re: eoip ... please help me

Please provide more details about what you want to do.
You can terminate multiple eoip tunnels on a single Mikrotik router (if that is your question).
Even more, Eoip is defined by "remote ip" and "tunnel id" so you can
have multiple Eoip tunnels between just two Mikrotik routers.
by soulflyhigh
Fri Sep 19, 2014 9:27 am
Forum: RouterBOARD hardware
Topic: Use MT as serial port relay?
Replies: 3
Views: 2045

Re: Use MT as serial port relay?

by soulflyhigh
Sat Sep 13, 2014 10:35 pm
Forum: RouterBOARD hardware
Topic: US MUM - New Products?
Replies: 11
Views: 4042

Re: US MUM - New Products?

If the CRS 8 port series don't have PoE out support like the ToughSwitch I'll be seriously disappointed.
+1
+1
by soulflyhigh
Tue Aug 05, 2014 9:26 am
Forum: Wireless Networking
Topic: QRT-2 Review
Replies: 1
Views: 1209

Re: QRT-2 Review

We use it in p2p and p2mp scenarios, no hardware problems so far.
by soulflyhigh
Fri Jun 20, 2014 1:14 pm
Forum: RouterBOARD hardware
Topic: RB953GS-5HnT!!!! 3x3 MIMO finally is there!
Replies: 12
Views: 8416

Re: RB953GS-5HnT!!!! 3x3 MIMO finally is there!

I can switch on or off one chain (any chain) without loosing any throughput, so obviously something is wrong...
There is nothing wrong with 3rd chain, you simply can't use it to aggregate more throughput because of a
low chain-to-chain isolation if you use all 3 of them in p2p configuration.
by soulflyhigh
Tue Jun 10, 2014 9:34 pm
Forum: General
Topic: v6.14 released
Replies: 114
Views: 37789

Re: v6.14 released

Upgrading from 5.x to 6.14 will remove wireless config so DON'T! :shock: If you want you can upgrade to 6.13 AND THEN to 6.14, that works fine. 8) Tried upgrade from 5.11 to 6.14 on RB411AH as a test for this bug. After first reboot there were no wireless interfaces at all (probably missing wireles...
by soulflyhigh
Wed Jun 04, 2014 4:48 pm
Forum: Beginner Basics
Topic: Strange ARP records!!! Need advise!!!
Replies: 2
Views: 1172

Re: Strange ARP records!!! Need advise!!!

All of them should be from the same subnet as your WAN IPs. Your provider is probably assigning you addresses from one pool which is shared between many other users. So, it is probably just broadcast traffic, nothing to worry about unless you can notice some performance or security issues. For start...
by soulflyhigh
Tue Jun 03, 2014 4:54 pm
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 6948

Re: QRT-2 new device?

500m, we've reduced wlan output power down to 17dBm on both sides (signal level was -32dBm with full power). That is excellent. How about noise environment? I can see noise but does this link is located in area with lot of wifi traffic? Anyway to Mikrotik - SXT SA is great for collocation place thi...
by soulflyhigh
Mon Jun 02, 2014 1:14 pm
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 6948

Re: QRT-2 new device?

500m, we've reduced wlan output power down to 17dBm on both sides (signal level was -32dBm with full power).
by soulflyhigh
Sun Jun 01, 2014 10:47 am
Forum: General
Topic: QRT-2 new device?
Replies: 17
Views: 6948

Re: QRT-2 new device?

Hi,

how wide beamwidth of QRT-2 ? 60 deg or 90deg ?

thks
22 deg
http://i.mt.lv/routerboard/files/QRT2-140313090230.pdf

Also, this is what a pair of them can do >
by soulflyhigh
Wed May 28, 2014 10:02 am
Forum: Wireless Networking
Topic: 200+ megabit over 55 kilometers
Replies: 9
Views: 3641

Re: 200+ megabit over 55 kilometers

With Mikrotik, only viable solution is high power 802.11n card with dual-pol high gain antenna on both sides. In ideal conditions (CCQ 100%, signal level -45 to -50dBm, 40MHz channel) that kind of equipment allows ~250mbps of half-duplex traffic. At 5GHz band and 55km distance, to get something arou...
by soulflyhigh
Thu May 22, 2014 10:22 am
Forum: General
Topic: v6.13 released!
Replies: 176
Views: 65824

Re: v6.13 released!

A "cosmetic" bug in winbox, "full duplex" value isn't shown :
by soulflyhigh
Mon May 12, 2014 4:01 pm
Forum: Wireless Networking
Topic: Throughput over 300Mbps on MIMO 2x2 ???
Replies: 53
Views: 17942

Re: Throughput over 300Mbps on MIMO 2x2 ???

Any news regarding this?
AR9300 series (QRT-5) ?
It has enough powerful CPU, gigabit ethernet, 23dBi dualpol antenna and good wlan card.
Made by Mikrotik :)
60Mhz channel width would be (in theory) 50% more on air rates than current maximum of 40MHz.
by soulflyhigh
Sat May 03, 2014 9:40 am
Forum: RouterBOARD hardware
Topic: QRT-5
Replies: 23
Views: 11020

Re: QRT-5

It should also be on sale with the cheapest version of the CPE RB911 L3 and 100mbit lan
+1
by soulflyhigh
Wed Apr 30, 2014 10:00 am
Forum: Wireless Networking
Topic: F50N on 433 router board for AP Bridge
Replies: 6
Views: 1916

Re: F50N on 433 router board for AP Bridge

Those 2 omni antennas should be in different polarization (one horizontal, second vertical), otherwise it won't be any better than just one antenna. It's much better to use 3 or 4 sector AP devices like those from SXT series (http://routerboard.com/RBSXTG-5HPnD-SAr2). If this is too expensive then i...
by soulflyhigh
Thu Apr 24, 2014 1:14 pm
Forum: RouterBOARD hardware
Topic: QRT-5
Replies: 23
Views: 11020

Re: QRT-5

QRT has two chains and Gigabit, "other brand" is single chain 100Mbit. Not a fair comparison Yes, correct again. But, again, that's not the point. If some other ISP can offer a similar or the same service at lower price then one can easily imagine the end result as loss of market share fo...
by soulflyhigh
Thu Apr 24, 2014 11:30 am
Forum: RouterBOARD hardware
Topic: QRT-5
Replies: 23
Views: 11020

Re: QRT-5

Single pol Antennas are *outdated*. We replace them where possible. You should look at your calculation and take the available spectrum into account. A user with singlepol antenna use up to double the airtime. That is, technically speaking, completely correct. Sadly, that comes at a much higher pri...
by soulflyhigh
Wed Apr 23, 2014 1:36 pm
Forum: RouterBOARD hardware
Topic: QRT-5
Replies: 23
Views: 11020

Re: QRT-5

I do recognize that QRT-5 will probably be an excellent device with good antenna, high throughput, powerful CPU, gigabit ether port and good build quality. But, it has about 50% higher price than custom made CPE with RB911 + 23dBi single polarization antenna. We need something like that (single pola...
by soulflyhigh
Wed Apr 23, 2014 10:03 am
Forum: RouterBOARD hardware
Topic: QRT-5
Replies: 23
Views: 11020

Re: QRT-5

Cheaper CPE-only version would be very interesting for us.
by soulflyhigh
Fri Apr 11, 2014 4:55 pm
Forum: General
Topic: RB2100UiAS-RM for iSCSI replication traffic
Replies: 3
Views: 2066

Re: RB2100UiAS-RM for iSCSI replication traffic

RB2011 series is much more like L3 switch than a real gigabit router. RB1100AHx2 would do much better for that kind of traffic and CCR series is even more powerful (but current version of software for CCR still has some problems). With RB2011 you could try upgrade to latest 6.x version which should ...
by soulflyhigh
Tue Mar 18, 2014 9:51 am
Forum: General
Topic: When will we have 802.11ac Support?
Replies: 33
Views: 14134

Re: When will we have 802.11ac Support?

Thats a part of a wisp. As the customers grow. You have to upgrade the equipment. I climb 3-5 towers a day non stop. We grow 15-20 new customers a week. So as soon as I put it up. Its outdated. Thats why I am using airfiber. I just keep making shorter links. Which means more bandwidth. Hi dallas di...
by soulflyhigh
Mon Mar 10, 2014 2:56 pm
Forum: General
Topic: 11ac radio?
Replies: 27
Views: 10574

Re: 11ac radio?

It seems that something is going on with 6.11rc1 and new wireless package.
by soulflyhigh
Sun Mar 09, 2014 8:13 pm
Forum: Wireless Networking
Topic: is this true?? 30 kms with SXT??
Replies: 17
Views: 4293

Re: is this true?? 30 kms with SXT??

The point is that it wouldn't be stable enough for anything serious (notice that the calculation is done with tx-power and rx-sensitivity for the lowest modulation of MCS0). The antenna gain (16dBi) is just too small for 30km link. For something truly usable and stable with reasonable throughput at ...
by soulflyhigh
Sun Mar 09, 2014 5:00 pm
Forum: Wireless Networking
Topic: is this true?? 30 kms with SXT??
Replies: 17
Views: 4293

Re: is this true?? 30 kms with SXT??

It is possible, but it's not a good idea.
Signal would be somewhere around -80dBm and we all know how bad that is.
Specs of SXT Lite5 > http://i.mt.lv/routerboard/files/SXT-Lite5.pdf
Calculator > http://www.mikrotik.com/test_link.php

Result :
by soulflyhigh
Thu Mar 06, 2014 8:21 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 108968

Re: v6.10 released

Also, with new wireless package... there is 5GHz AC band in "New wireless channel" menu?
Does this mean that AC is finally supported?
by soulflyhigh
Thu Mar 06, 2014 6:16 pm
Forum: General
Topic: v6.10 released
Replies: 248
Views: 108968

Re: v6.10 released

What's new in 6.11rc1 (2014-Mar-06 15:05): *) wireless - add auto frequency feature; What is auto frequency feature? As I can see on my test router it changes frequency but there is no any explanation how this work exactly (it works too quickly for "complete scan and select the best channel&qu...
by soulflyhigh
Fri Feb 21, 2014 3:22 pm
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 145
Views: 73522

Re: MUM Europe 2014 - Italy, Venice, February 20-21

Finally some exciting news :)

Normis, those dish antennas are for 5GHz band?
Can you tell us more about them (gain, vswr-frequency graph, port-to-port isolation and other specs)?
by soulflyhigh
Tue Feb 18, 2014 1:18 pm
Forum: Wireless Networking
Topic: Weird wireless deauth erros Any ideas?
Replies: 7
Views: 2933

Re: Weird wireless deauth erros Any ideas?

Maybe cpu usage peaks?
I've seen something like that on older RBs with new RouterOS versions.
by soulflyhigh
Tue Feb 11, 2014 10:53 am
Forum: Wireless Networking
Topic: NV2 Bad client degrades the overall performance
Replies: 5
Views: 3143

Re: NV2 Bad client degrades the overall performance

ok, but with the tdma protocol we could give a determinate amount of time/utilization to prevent this behaviour. if only there was an option to set it :( That's the theory :-/ From mikrotik nv2 wiki page http://wiki.mikrotik.com/wiki/Manual:Nv2 : Features that Nv2 DOES NOT HAVE YET: administrator c...
by soulflyhigh
Mon Feb 10, 2014 1:52 pm
Forum: Scripting
Topic: ROS_script_editor_0.9
Replies: 14
Views: 4020

Re: ROS_script_editor_0.9

Doesn't work on Win 7 x64 in "native mode" but it does work in "Win XP SP3 compatibility mode".
by soulflyhigh
Sun Feb 09, 2014 7:51 pm
Forum: Wireless Networking
Topic: Please Help Me Find out the problem?
Replies: 2
Views: 1387

Re: Please Help Me Find out the problem?

It may be many things.... check with torch tool what kind of traffic is arriving at ether1 on "side A".
This could also be some issue with queues or some problem with wlan link between A and B side (ccq, signal level?).
by soulflyhigh
Sun Feb 09, 2014 7:45 pm
Forum: RouterBOARD hardware
Topic: rb780UP! - Total power consumption, and more wishes...
Replies: 11
Views: 5257

Re: rb780UP! - Total power consumption, and more wishes...

Great idea. We could also use 10 or 16-port version of RB750UP at many sites.
by soulflyhigh
Mon Jan 06, 2014 3:54 pm
Forum: General
Topic: Tap Multiple RB... Request
Replies: 12
Views: 3423

Re: Tap Multiple RB... Request

I think it is more user-friendly to have multi-tab interface than a bunch of windows sitting in taskbar. The taskbar sometimes can become very crowded place and at that point it is hard/slow to find/switch to correct winbox session. Something very similar has already happened with web browsers, even...
by soulflyhigh
Mon Dec 30, 2013 4:51 pm
Forum: General
Topic: user with read permissions can shut down the router
Replies: 7
Views: 3546

Re: user with read permissions can shut down the router

This is the default config on RouterOS : [admin@MikroTik] > user group print 0 name="read" policy=local,telnet,ssh,reboot,read,test,winbox,password,web,sniff,sensitive,api,!ftp,!write,!policy skin=default 1 name="write" policy=local,telnet,ssh,reboot,read,write,test,winbox,passwo...
by soulflyhigh
Fri Dec 20, 2013 10:48 am
Forum: The Dude
Topic: Dude 4 beta 3 - Weird issue all of a sudden after 3+ years
Replies: 1
Views: 1879

Re: Dude 4 beta 3 - Weird issue all of a sudden after 3+ yea

Try to reboot The Dude server.
How many devices you're monitoring (10, 100, 1000, more?)?
I have that problem all the time (with both Dude 3.6 and 4b3), reboot usually helps...

The Dude stopped breathing few years ago but it's not buried yet.
Many of us are still hoping for a miracle.
by soulflyhigh
Mon Dec 02, 2013 9:04 am
Forum: General
Topic: 532 rb constantly reboots as soon as I scan 5.8ghz frecuency
Replies: 3
Views: 1416

Re: 532 rb constantly reboots as soon as I scan 5.8ghz frecu

Tried with different wlan card?
by soulflyhigh
Sat Nov 30, 2013 6:07 pm
Forum: RouterBOARD hardware
Topic: RB750GL maximum throughput
Replies: 4
Views: 3727

Re: RB750GL maximum throughput

Don't use eoip for high speed L2 tunnels, try mpls/vpls instead.
by soulflyhigh
Fri Nov 29, 2013 10:17 am
Forum: RouterBOARD hardware
Topic: rb750up with sfp and more ports
Replies: 6
Views: 2504

Re: rb750up with sfp and more ports

We also need something like CRS with 2-4x SFP ports and 24-48x PoE-out ports (and really good PSU).
Stacking 5-10x RB750UP and interconnecting them on the same place is just a mess.
by soulflyhigh
Fri Nov 29, 2013 9:38 am
Forum: General
Topic: Log is flooded with "system, info address changed"
Replies: 5
Views: 2920

Re: Log is flooded with "system, info address changed"

Well, does it really changes or doesn't?
Could you post export of your configuration (mask public ip and/or other sensitive information)?

Regards,
M.
by soulflyhigh
Wed Nov 27, 2013 3:10 pm
Forum: Beginner Basics
Topic: Routerboard Shorts Poe
Replies: 3
Views: 1465

Re: Routerboard Shorts Poe

1. double-check the cable and RJ45 connectors
2. try another 24V PoE adapter
3. try to power up another RB711 (or some other routerboard from RB4xx or RB7xx series) through that cable
by soulflyhigh
Sat Nov 23, 2013 8:01 pm
Forum: Wireless Networking
Topic: nv2 vs N problem
Replies: 3
Views: 1686

Re: nv2 vs N problem

Try with
nstreme.png
nstreme, "best fit" framer-policy
by soulflyhigh
Sat Nov 23, 2013 6:09 pm
Forum: Wireless Networking
Topic: nv2 vs N problem
Replies: 3
Views: 1686

Re: nv2 vs N problem

Hello, What are the signal levels on both chains and SNR? It looks like interference problem. You MUST have signal level of at least -55dBm (for stable 300/300mbps modulations) and clear channels on both sides within 20+(20+20)+20MHz for good ccq (95-100%). You could try to find better channel and t...
by soulflyhigh
Thu Nov 21, 2013 6:40 pm
Forum: Wireless Networking
Topic: 300 mbps PTP link
Replies: 1
Views: 1252

Re: 300 mbps PTP link

It will have too low fade margin with 19dBi antennas. Take a look at specs http://i.mt.lv/routerboard/files/R52n-M.pdf
R52n-M has only 13dBm output power at max. modulation.
For that range you should chose higher gain antennas... 23dBi at both ends is a minimum IMO.
by soulflyhigh
Thu Oct 31, 2013 2:22 pm
Forum: The Dude
Topic: SNMP updating problem
Replies: 1
Views: 1517

Re: SNMP updating problem

Probably old bug, which isn't solved yet because of... well, just read it
and leave your opinion there--> http://forum.mikrotik.com/viewtopic.php ... 46#p393396
by soulflyhigh
Thu Oct 31, 2013 2:12 pm
Forum: The Dude
Topic: The Dude is dead. Move on.
Replies: 105
Views: 46703

Re: The Dude is dead. Move on.

I'm sorry but there are no news about the Dude now. We are overloaded with new product support, and we don't have a dedicated Dude programmer at the moment. We have not forgotten about the Dude, and a new version is still planned someday. I've read this last night and still can't believe that this ...
by soulflyhigh
Sun Oct 27, 2013 1:43 pm
Forum: General
Topic: User Permission bug in RouterOS v6.5
Replies: 2
Views: 1125

Re: User Permission bug in RouterOS v6.5

Are you sure your config is ok?
I tested this on RB2011UAS, v6.5 mipsbe, no such issue.
by soulflyhigh
Sat Oct 26, 2013 10:54 pm
Forum: General
Topic: V7 soon ?
Replies: 20
Views: 10749

Re: V7 soon ?

No not really. Lets let mikrotik focus on jobs for routers instead. Like routing, qos and security and their old favourite wireless

Sent from my GT-I9100 using Tapatalk now Free
+1
by soulflyhigh
Sun Oct 20, 2013 5:33 pm
Forum: The Dude
Topic: Dude v4beta3 released
Replies: 251
Views: 126949

Re: Dude v4beta3 released

Bloody hell (please pardon my French and bad English). If the number of developer's staff is the only problem find/hire one more (or two). Even if they are novice they can do minor changes/bug fixes and will eventually make some real progress. The effect of their work could be enormous for all of us...
by soulflyhigh
Wed Oct 09, 2013 10:36 am
Forum: RouterBOARD hardware
Topic: RBSXTG-5HPnD-SAr2 Antenna pattern
Replies: 1
Views: 1288

Re: RBSXTG-5HPnD-SAr2 Antenna pattern

+ 1
please!
by soulflyhigh
Mon Oct 07, 2013 9:08 pm
Forum: General
Topic: DDoS attack?
Replies: 16
Views: 6861

Re: DDoS attack?

/ip dns set allow-remote-requests=no
by soulflyhigh
Thu Sep 19, 2013 9:42 pm
Forum: General
Topic: MUM Live video from St. Louis starting now!
Replies: 52
Views: 22409

Re: MUM Live video from St. Louis starting now!

Normis,
Image from projector on the wall is way to bright to watch online, it is impossible to see almost anything,
could someone reduce the exposure settings on the web camera?
by soulflyhigh
Mon Aug 12, 2013 4:27 pm
Forum: General
Topic: Feature Request: MTR
Replies: 71
Views: 35075

Re: Feature Request: MTR

What's new in 6.3rc1 (2013-Aug-09 11:56): *) traceroute - added mtr like pinging; *) fix queues - correct queue was not installed when last child removed; *) fix simple queues - sometimes some simple queues would stop working after configuration changes; *) console - fixed issue with local variables...
by soulflyhigh
Tue Aug 06, 2013 11:04 am
Forum: Wireless Networking
Topic: how determine model mini-PCI through MAC-address?
Replies: 2
Views: 1316

Re: how determine model mini-PCI through MAC-address?

1st is R52
2nd CM9
3rd R52

This site can find manufacturer by MAC address http://coffer.com/mac_find/
by soulflyhigh
Wed Jul 24, 2013 4:16 pm
Forum: Wireless Networking
Topic: Experiment...
Replies: 2
Views: 1334

Re: Experiment...

Wait, you have 2 wlan cards in station mode on the same RB800 with the same ssid, connected to the same AP? Why?
They're just self-interfering with each other. Disable one of them and then check the signal levels and ccq.
Use nstreme or nv2.
by soulflyhigh
Wed Jul 24, 2013 3:48 pm
Forum: RouterBOARD hardware
Topic: CRS Switch - How's it coming?
Replies: 21
Views: 10875

Re: CRS Switch - How's it coming?

+1.
by soulflyhigh
Wed Jul 24, 2013 3:24 pm
Forum: General
Topic: Try to understandig bridges
Replies: 9
Views: 2432

Re: Try to understandig bridges

/interface bridge
add arp=reply-only name=bridge1
Try this instead :
/interface bridge
set bridge1 arp=enabled
by soulflyhigh
Wed Jun 26, 2013 2:10 pm
Forum: Wireless Networking
Topic: New Mikrotik 25dB CPE device
Replies: 3
Views: 1838

Re: New Mikrotik 25dB CPE device

Any news about higher gain CPE device?
Maybe something like "Groove 5Hn" with 23-27 dBi integrated dish antenna 1x1 802.11n?
by soulflyhigh
Fri Apr 19, 2013 9:06 am
Forum: General
Topic: Feature Request: MTR
Replies: 71
Views: 35075

Re: Feature Request: MTR

Bloat-ware ?

Are you kidding me ?

We have LCD, SMB etc which are completely useless to %99 of the people and the most useful tool after PING will make it a bloatware ?

If MT is smart enough, they would listen their customers and implement it right away.
100% TRUE
by soulflyhigh
Thu Dec 13, 2012 1:19 pm
Forum: Wireless Networking
Topic: Wireless link over the sea‏
Replies: 9
Views: 3909

Re: Wireless link over the sea‏

Don't think that the distance is the biggest problem but weather might be. I would use dual polarized 32dBi dish with radome on both sides and high power 802.11n cards (F50N-PRO or SR71-15) - you should get -60dBm or better signal level. Aslo, to reduce losses on RF chains and improve overall stabil...
by soulflyhigh
Sun Nov 18, 2012 10:12 am
Forum: Wireless Networking
Topic: Suggestion for 30 miles link
Replies: 11
Views: 2868

Re: Suggestion for 30 miles link

If the path profile is correct, there is no clean LOS so the link won't be stable.
You could try to mount antennas on highest possible position on both sides,
use higher frequency (5700 + MHz), bigger antennas and horizontal polarization.
by soulflyhigh
Wed Nov 14, 2012 9:41 am
Forum: Wireless Networking
Topic: Wireless (Atheros AR9271)Connection Problem in Mikrotik 5.20
Replies: 5
Views: 3690

Re: Wireless (Atheros AR9271) Not Running Mikrotik 5.20

It is running, you just need to connect at least one client on that ap bridge interface and then will show "R" on the interface list.
by soulflyhigh
Wed Oct 31, 2012 9:56 am
Forum: Forwarding Protocols
Topic: IPSEC through ipip - high cpu usage?
Replies: 0
Views: 1387

IPSEC through ipip - high cpu usage?

Hi, anyone else had a problem with ipsec through ipip on RouterOS (i tried v4.17, v5.11 and v5.21) with high cpu usage? 1.5mbps was enough to get 100% cpu on RB433AH which cpu runs on 680MHz - I checked it just to be sure. Strangely, on v6.0rc1 and v6.0rc2 works much better (20-30% on 3mbps). CPU go...
by soulflyhigh
Sun Oct 21, 2012 9:39 pm
Forum: RouterBOARD hardware
Topic: 433uah with 3 r52hn
Replies: 18
Views: 4844

Re: 433uah with 3 r52hn

Maybe something like this :

Cheers :)
by soulflyhigh
Sun Oct 21, 2012 9:21 pm
Forum: RouterBOARD hardware
Topic: 433uah with 3 r52hn
Replies: 18
Views: 4844

Re: 433uah with 3 r52hn

Well, the problem is the routerboard itself. Those three minipci slots are way to close to each other, it's a design flaw - nothing more. You just can't stack wlan cards one after another with 2-3mm gap - this is just against common sense. Every routerboard model since RB532 with multiple minipci sl...
by soulflyhigh
Sat Oct 06, 2012 7:46 pm
Forum: General
Topic: RB433uah Rebooting after over 200 days
Replies: 6
Views: 1876

Re: RB433uah Rebooting after over 200 days

I would check first the electrolytic capacitors on the board, it's possible some of them are leaking and causing strange effects. I know it is unusual but it is possible. v 5.11 is very stable. p.s. Also, check real half/full duplex status on both sides of ethernet cables connected to the unit - low...
by soulflyhigh
Fri May 25, 2012 1:06 pm
Forum: RouterBOARD hardware
Topic: RB951-2n and Metal now shipping
Replies: 69
Views: 32195

Re: RB951-2n and Metal now shipping

Routerboard Metal sounds fantastic :) However, the problem I see with the Metal is the orientation of N-male connector / ethernet port. Majority of antenna types have a horizontal connector (in properly installed position). This means that Metal is impossible to mount on such antennas without exposi...
by soulflyhigh
Mon Apr 23, 2012 9:03 pm
Forum: General
Topic: v5.15 released!
Replies: 150
Views: 40963

Re: v5.15 released!

Hello guys, I got a strange bug in 5.15: when I create users through terminal, say with /user add name=xxx password=yyy group=zzz , the user actually gets created without a password (so anyone can login as xxx). Workaround is to use /user set xxx password=yyy but that still leaves some time window ...
by soulflyhigh
Thu Mar 08, 2012 10:44 am
Forum: General
Topic: 100M FD fixed ports connects at 100 HD - how?
Replies: 1
Views: 1478

Re: 100M FD fixed ports connects at 100 HD - how?

Hello, I have the same problem on a large number of RB4xx and newer routerboards after every reboot/power-up connected to a Cisco 3500/3560 type switch on many sites/locations. It has started to happen somewhere between v3.26 and 3.30 of RouterOS and the problem is still here. Solution I found is ei...
by soulflyhigh
Mon Dec 26, 2011 12:07 pm
Forum: RouterBOARD hardware
Topic: New hardware found, but is it better?
Replies: 6
Views: 2498

New hardware found, but is it better?

Dear all, Right now, I'm watching one of old 532a routerboards at my desk. It has chips/memory made by VIA, nanya, Infineon, hynix, metal RJ-45 connectors... and comparing it RB433AH and with image of this new product : http://download.routerboard.pl/rb433GL.pdf Zentel?? MOC?? plastic RJ-45... where...
by soulflyhigh
Sun Nov 20, 2011 3:16 pm
Forum: General
Topic: Changing def. columns in winbox wireless registration table?
Replies: 1
Views: 1031

Changing def. columns in winbox wireless registration table?

Hi, is there a way to change default winbox appearance in wireless registration table? I need a command to display, for example, Rx/Tx CCQ, Tx Signal Strenght columns and not to display "Last Activity (s)" column. I know it is possible to change it from winbox itself (show columns) but due...
by soulflyhigh
Mon Sep 12, 2011 5:42 pm
Forum: General
Topic: Private VPN connection resets every 12 minutes
Replies: 1
Views: 880

Re: Private VPN connection resets every 12 minutes

Hello,
can you draw a network diagram of that configuration? What exactly does RB433 do (what type of internet connection do you have - cable, (a)dsl, wireless) ? What logs says?

Regards.
by soulflyhigh
Fri Sep 02, 2011 6:36 am
Forum: RouterBOARD hardware
Topic: RB493GAH Ethernet Link/Auto-Negotiation Issues
Replies: 1
Views: 1449

Re: RB493GAH Ethernet Link/Auto-Negotiation Issues

Welcome to the club. Try to downgrade to RouterOS v3.26 .
Weird things happens with ether interfaces on newer versions (both v4.xx and v5.x) .
Good luck :)
by soulflyhigh
Tue Jul 26, 2011 12:12 pm
Forum: General
Topic: Help finding source of packet loss
Replies: 1
Views: 874

Re: Help finding source of packet loss

Try to fix ethernet port speed on C1 and R1 (100M, full duplex, no autonegotiation on both sides).
by soulflyhigh
Wed Sep 08, 2010 12:14 pm
Forum: Wireless Networking
Topic: FOR UAV AIRPLANES NEED VIDEO TRANSMISSION EQUIPMENTS
Replies: 5
Views: 2291

Re: FOR UAV AIRPLANES NEED VIDEO TRANSMISSION EQUIPMENTS

First, you should probably try some kind of wireless analog system with omni antennas on UAV and receiver because that kind of sistems are in use for long time and they are "mature product". Also, i think there are some digital systems on the market for wireless video streaming (not sure a...