/ip firewall service-port print
Thanks Normis.this has been discussed a lot. 802.11n cards are not supported at all right now. we are working on it.
Thanks Normis, I can proceed with upgradethe DST NAT will work as you said, the changelog means that now, you can ALSO specify ONLY port, but of course, you can also specify both, as before
I too have also adapted those scripts for our setup with excellent success. We have managed to control many aspects of usermanager and ROS etc via scritpting.
These scripts I mainly got working due to a excelent scripter, qnect. I took his script and rewrote it to my needs with great success.
{ :local foo
:local bar
:if ($foo = [:nothing] ) do={ :set foo foo }
:put $foo
}
So it seems with V3.once a packet has determined and out-interface its too late to change that with a routing mark.
That should be perfectHi,
I bought a power supply 48V/24W with a passive poe injector.
Is that ok?
Thanks,
levis
Where does the RB333 show this information?RB333 shows voltage, but RB532(& A) always show 0v. I think only RB112 can show temp as well.
Just worth pointing out - each bridge in your data path will halve throughput. Routed links are far betterFYI this setup is a transparent bridge no routes.
/ip web-proxy access disable [/ip web-proxy access find src-address=192.168.5.0/24]
Do you have PCI ADSL Cards running in RouterOS?I too upgrade my P IV 2,4 Ghz + 768 Mb + hd 40gb + mother Intel d845 + 6 nics (3 nic adsl - 2 nic wireless - 1 nic LAN) to 3,6 and everything works great !!
Are you using connection/packet marking with mangle for the load balance?using dst-nat and src-nat works very well for me too but here is the kicker... i can you impletement load balancing? everytime i go to do load balancing, my srcnat and dstnat rule no longer works.. any ideas?
I'd agree. This is possibly the most important release to date of 2.9.x. Our upgraded towers are running wireless AP better than they ever have. Rock Solid!I would like to say that ROS 2.9.45 is working great than I ever see about wireless AP comparing to older versions! Thx.
Merely figurative. The point is I have noticed some increase in gain.I think your arithmetic is a bit out! An 8 to 9dB gain is around 8x, 1000x = 30dB gain.
Can you share an example?----
yes,
you must have Ambulance Traffics way's
i mean: create mangle as icmp and queue tree put them traffics on it queue with first priority
What happens here? is this a security hole?Just do not enable it on a gateway
chain=srcnat out-interface={your wan interface} dst-address=0.0.0.0/0
action=masquerade
Hi there Jrslick22, your new zealand? flick me your number and ill give ya a call geoff at airstream dot net dot nz.Is any one running 2x SR5's and 2x CM9s in an RB500?
im told it wont work as the SRs draw to much power?