For this you need to do with Radius parameter as well you need to do with address list passing the address list name in radius policy name , which radius you are using ?
On firmware version 5.5.2 the DNS proxy does not work when you are not running a DHCP server on the device. Because there's not "DNS Proxy" option on the web interface if the DHCP Server is disabled, you can fix it as follow: - Enable the DHCP server on the AirOS device with "DNS Prox...
I am using dmasoftlab and mikrotik, i want to setup that if user is having speed of 1Mbps but if they try to open the website like youtube.com then for that specific website user will get speed of 4Mbps so can any one advice me how can i achive the same ??
Dear Forum Members i have Mikrotik Router as my core router I have two physical up link from single service provider , The Service provider ASNumber is only one, where i have one IP pool which i had mapped with my two ASN Number , On both link one link is of 20Mbps and second link 50Mbps now i am us...
Dear all I have 3 service provider with following bandwidth. Provider - A - 90Mbps , this ISP provides me only 2 IPs Provider - B - 155Mbps, This ISP provides me 8 IPs Provider - C - 20Mbps This ISP provides me 2 IPs I have my own IP Pool & my own ASN Number, now i dont know what configuration i...
Dear Sir, I have customer running on PPPoE but customer are connecting threw PPPoE username and password & found that in tourch 0.0.0.0 with traffic approx 2Mbps + due to the same customer are getting error Connecting Throw WAN MiniPort (678) can you advice how i drop this 0.0.0.0 traffic NIshit
I have one AP on the same i have multiple access points connected but on them all i am getting very less RX bandwidth, i try so many ways but the RX is always less
Any one can advice me how to setup up to speed , in PPPOE with dmasoftlab as I want to setup something that my customer should get 4mbps up to 20GB and then speed should be 512kbps I have huge bandwidth in back houl so my customer always getting 4mbps it is not something up to so can any one advice ...
Hello I have omnitek at central site and with omnitek i have 6 sxt are connected, previously i was facing issue of flooding so change the client from station-WDS to Station but due to any reason the omnitek is getting down then i need to restart the omnitek and then again it works well for 4-6 hrs a...
Hello Thank you for the response i setup iptables and now radius is not getting affected with so much of traffic also but now i am getting too much internal flooding in the network, can you please advice me how to detect those unwanted traffic and shape the traffic properly so that customer get bett...
We are facing issue of flooding so i need script in which if any user request comes more then 10 times or example 50 times in 10sec or in 1 sec that mac address should require to be in firewall
so is there any rule or script which can help me to prevent from flooding
Hello I have so many customers which are running on PPPoE, but i found that so many customers are getting disconnected multiple times, the time frame is like 100 times in 8 hrs , i checked try to get information in around and found that it is due to traffic issue , some computer generate flood then ...
Hello there is some heavy flooding running in my network, i am using dmasoftlabd as a RADIUS server, the dmasoftlab is hosted on another network ,but due to flooding the network is getting down at that level that my radius server internet acess getting dropped, i guess LAN Card is getting hang, i tr...
Hi, I am not sure about your environment but in my environment i am running Omnitek with 5KM , 3KM , 1KM , 10KM also & all are working but CCQ for 1KM & 10KM ( Client side RB411AH with 25dbi Aentena) almost same not much diffidence I am not sure but i made some mistake in configuration. Can ...
I disabled the MCS but the performance is not much stable yet, can any one advice how can i make more stable performance, the CCQ is yet 65/66 or 34/35 , 36/42 , 51/52, 67/11 , 61/73 ,
Hello I am running MIkrotik RB450G and doing BGP on the same router, the traffic is approx 60Mbps on going , before 4 days back mikrotik router RB450G goes down where i checked everything and found the port of MIkrotik router is getting 10Mbps in place of 1000Mbps , so change port and start traffic ...
If i placed multiple Omnitek in short distance cant affect the Penetration ?? will work properly ?? some one suggest me to use the least device in network so i placed little less equipment
Hello I have one Omnitek with multiple SXT , on each SXT i am getting good result like approx 6Mbps but the result is not stable, the variation in traffic i can see some times the download speed reduced and some time comes stable also the latency on PING is fluctuating, so can any one advice the bes...
I found that PPPoE users are getting disconnected each & every 10 Min for some users are again getting back connected after some time, can any one advice what may the reason is ???
I have which can work up to 5KM but if support more then i can use for more also. but which equipment you suggest to use for audio video to ethernet ??
I am having point to point link on which i have 10Mbps Real bandwidth i like to run Audio Video over Wireless link , so is there any chance to do the same on mikrotik point to Point link.
Hello Some time as client CPE due to any reason i am getting issue of too much flooding and due to flooding all my customers are getting disturb, can any one advice how to create VLAN on dynamic WDS so that one customer network issue wont affect the other one which help me more to run network stable...
Hello Can any one suggest me the best way for IP Sec WAN Fail over , I have two site with Cyberaom i had configured Mikrotik VPN IP Sec which talk properly wtih cyberoam, I want that if my one site cyberoam fail the IP sec should establish to other site cyberoam. Please advice how can i configure th...
Hello I want to create VLAN on SXT which i want to connect with Ominitik 5.8Ghz Can any one suggest me the best option to create VLAN by which we can get best out put of the resources !!! As i connected 7 client on one Omnitik with NV2 working well but some times the it affect internally, So i want ...
I want to hide my AP-Bridge Omnitik from the scan list of any other hardware, can any one advice the best way to hide the device, frequency which we are using , version we are using and everything from scan the other mikrotik.
Hello I have Omnitik at my central site & i connected 5 -6 SXT or RB711 at client site, my Omnitik network is running over NV2 the network running is far stable but still i want to make it more secure with creating VLAN or VPLS where the traffic should run on shape. Can any one advice me step by...
Hello Technically it is possible but yes this is not good practice due to security reason as well Network level, because if you want user to be online always then that will use your network all the time if he is even in ideal mode. So better you keep it as they need to login. Or you can set cokies b...
Hello Between your RADIUS and NAS there is always connection connected but if some time it drops and the same time session time out not sent to the NAS the NAS wont connect the user or RADIUS wont connect the user due to the same you can able to see that user online on your web portal If you made an...
Both are working on Dynamic port so limiting bandwidth for both this is difficult & not available in mikrotik but you can try with adding some firewall rule but that will block it but not allowed to limit it
Thank you for reply, can you please share some config which you follow , as well how about your environment for 5.8 penetration ?? can you suggest me best config which we need to take care to run customer very stable ??
I try multiple time to making it auto mode but wont work, also i connected to direct laptop and restart it get boot shows 10Mbps and then LAN unplugged, if i make my laptop 10Mbps then it works.
my all Omnitek 5.8 back houl is on fiber optics, but i want to know how much bandwidth Omnitek can caters and if i use multiple omnitek does it affect the network regarding penetration ??
I have multiple Mikrotik Board where i am getting that after some time it is getting 10Mbps & Auto Negotiation is not working, can any one suggest me the reason of it as well what is the solution of it
Hello I am not going to use my own tower, I am leasing from other so more equipment i put , more rent i have to pay, so i plan for OmniTek , also i like to know that i am planning for frequency like as below 4825 5120 5350 5480 5580 5670 5825 So will that kind is it worked ?? Please suggest best sol...
Hi, In 27 KM RADIUS Area if i put 27 Omnitek as a AP-Bridge will that affect the penetration ?? penetration will affect network ?? Which is the best Mikrotik CPE i can put which gives me very stable output ?? My plan to give 5.8 CPE to each customer & running network on NV2 & NSTREAM. I dont...
I made a link point to Point the location is of 16KM but it is not getting stable, can any one suggest me the exact steps by which we can make the point to point link too much stable
Hi I am facing too much issue of network flooding ., MAC Flooding , PPPoE Request Flooding, DDOS attacks & due to the same i am need to unplug different lines multiple times to making network stable. I want to make VLAN where i shold get some solution that if any issue comes from specific custom...
Hi I am facing too much issue of network flooding ., MAC Flooding , PPPoE Request Flooding, DDOS attacks & due to the same i am need to unplug different lines multiple times to making network stable. I want to make VLAN where i shold get some solution that if any issue comes from specific custom...
Hi I am facing too much issue of network flooding ., MAC Flooding , PPPoE Request Flooding, DDOS attacks & due to the same i am need to unplug different lines multiple times to making network stable. I want to make VLAN where i shold get some solution that if any issue comes from specific custom...
Hi I have Omnitek 5.8 and i have connected 7 clients on the same with RB7115hn, the distance of clients is from 1KM to 6KM & the links are almost working good (not best) previously, but suddenly since last some days my all clients are getting connected and disconnected continuesly, my clients ar...
**************** SORRY WRONG MESSAGE AT WRONG POST BUT NOT GETTING REPLY ON ORIGINAL POST******************* Dear Sir I had configured one point to point link getting RSSI 64/68 but in that the link bandwidth throughfut is only 3mbps , where the hardware is RB433AH, with 800mW card, some times worki...
Dear Sir I had configured one point to point link getting RSSI 64/68 but in that the link bandwidth throughfut is only 3mbps , where the hardware is RB433AH, with 800mW card, some times working well but some times it is not working well, Can you please let me know how to improve the signal !! Thanks...
Dear Sir I had configured one point to point link getting RSSI 64/68 but in that the link bandwidth throughfut is only 3mbps , where the hardware is RB433AH, with 800mW card, some times working well but some times it is not working well, Can you please let me know how to improve the signal !! Thanks...
Dear Sir I had configured one point to point link getting RSSI 64/68 but in that the link bandwidth throughfut is only 3mbps , where the hardware is RB433AH, with 800mW card, some times working well but some times it is not working well, Can you please let me know how to improve the signal !! Thanks...
Hi, I am new at Mikrotik, I want to setup multiple Point to Point link, i want to know the following things - How to choose right router Board - How to choose the wireless card, which are available brand & how choose mW power of the card - End to end configuration of Point to Point link which mu...
Can any one advice me the robust link advice steps one by one. I like to setup point to point link with station WDS as a client side and at central side i have RB433AH
can any one share step by step method for cofiguring the point to point link.
Thank you for prompt response but the same is running since long without any issue and working well also....suddenly all are stopping.... as well customers are connected from diffirent areas, where power voltage and everything are at diffirent area ??
Hi, I am running mikrotik with Free RADIUS server but i found that my some users are disconnecting multiple times without any changes in the system , the users are connected via cable properly but without any reason they are getting disconnected after any point of time & reconnecting automatical...
Also i need some standard and excellent method for implementing the point to point link with mikrotik, or steps which we need to take care all time when we implement mikrotik based point to point link..
I configure two Bridge Device which are point to point both are visible from both side but when i try to connect from any side data transmission is not happening,
image.JPG
so can any one advice how to set which can help us.
Hi, I created one link on 2.4 with point to point RB411, i am getting WDS but i am unable to ping from one link to another link, also our network runs on PPPoE, where i try to connect the customer with PPPoE but that also not able to connect Can any one advice what may the reason ?? what is best con...
Hi, I created one link on 2.4 with point to point RB411, i am getting WDS but i am unable to ping from one link to another link, also our network runs on PPPoE, where i try to connect the customer with PPPoE but that also not able to connect Can any one advice what may the reason ?? what is best con...
Hi, Still i am facing same issue, I am able to see the remote device MAC address but not seen the IP, I try to connect via MAC not able to get connect to the Remote Mikrotik Box. attached screen shot of the same, can any one advice the strong solution for this problem, either i reset device remotly ...
I like to block all Traffic except port 80 where user can not able to access any other then normal surfing, can any one advice how can i block the traffic other then port 80
I dont want to use the proxy server at all. i need solution on customer bridge.
Dear Sir, We are facing some time suddenly all users are getting disconnected and we need to either the disabled and enable the LAN card or we have to restart the computer, can any one suggest me what may be the reason is as well why this could happen !! What may be the best solution ?? Regards Nishit
We don't want to use emails for Spamming, but we need all Emails , and you can show email address, if user dont want to show email then can disable, but why you by default disable the same,
I am communicating with some one on forum, i want his email id but i am unable to find the same, can you please advice how can i get the email id of the user
I like to set firewall for PPPoE Users on there user name, can any one suggest how can i able to set that firewall rule, the user name is only static, remain all things are dynamic, even IP address is also dynamic
I am facing slow browsing in the network as customers are suffering from slow browsing issue, when i try to download the content, i am getting proper speed, but when i try to surf getting poor speed, can you please suggest us the best solution for the same
Dear users, We have RB7115Hn & created point to point link but on the same we are getting lot of traffic on both side where there is no users are connected on any side, there is more then 2mbps of traffic always going on the network , which is reducing the speed of internet. We added some firewa...
Dear users, We have RB7115Hn & created point to point link but on the same we are getting lot of traffic on both side where there is no users are connected on any side, there is more then 2mbps of traffic always going on the network , which is reducing the speed of internet. We added some firewa...
Hi, I created transparent proxy with adding new hard disc in my existing mikortik based computer and my all users are connected via PPPoE but when i open website www.whatismyip.com i found following message Your IP Address Is: 2X2.1Y0.W7.Z Possible Proxy Detected: 1.1 2X2.1Y0.W7.Z(Mikrotik HttpProxy...
I want to block the Porn Sites and other Ports then 80 only for hotspot users, can any one suggest how it is possible?? The same user id and password sholuld require to work when they connect with PPPoE Dialer and allow all website also, suggest how can we impliment the same
Hi, I found the transparent proxy setup but when i applied and i acess website like www.whatismyip.com then it is showing that user is behind proxy, can you suggest how can i resolve this issue ? i want to make proxy & cache server but user should not get idea that there is some cache server or ...
Hi, I have following network in my area. i have 2 links both are not connected any where on Public IP network as well there is no where IP address assign all over the network, my requirement is to setup Fail Over, I have one Link which is going to come on Fiber Network & one other link is Wirele...
Since last 4 months i am using RB1100, but in last 3 months on RB 1100 my 3 ports are failed, can you suggest me does it product support 90mbps of throughput ?? Any good solution to make RB1100 usable for ISP network ??
Dear Sir, We found there are lot of RX Errors on the mikrotik Port as well due to some reason our 2 ports are failed, can you please suggest how can we resolve the issue ?? We try to get the port on winbox but not able to see that MAC and IP in the system, can you please suggest the reason for the s...
Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
Hi, I have RB1100, i am running Radius Manager the problem what i am facing is i want to run PPPoE CLients, Hotspot users as well Static IP users on the same interface, my WAN comes at Interface 13, and i want to run all 3 services on Port No 6 as well everything will require to manage from the RADI...
Hi, Thanks for your support but i don't know but after making this changes the system is not stable, previously up to 5 KM 2mbps link was running very well but now it is giving very poor result, there are so many ping drops and internet is getting disconnected, RSSI is again -69 to -75 but result is...
Hi, Thanks for the changes, i done the require changes attached screen of the same but the issue is same that i am not getting upload properly as if i set to any user and set upload 1Mbps same download 1Mbps i am getting only 256kbps upload where download i am getting proper. Can you please advice h...
Hi, I configure 18dbi sector aentena with RB433 AH & connecting CPE at diffirent location but i am not getting proper upload. Can any one suggest us the good configuraiton. We are using as base station where multiple clients is getting connected. attached is screenshot of configuration. Regards ...
Dear Sir, ( Here WiMax is consider as Free Freq. ) We are looking for solution where we have one base station which have fiber as back haul, which can have some good traffic capacity & customer carry one CPE at there end, which is in LOS or NLOS which can communicate with base station & get ...