have u all down graded it back to 5.06 and test to see if the bug/issue is there or not

i got a friend using 5.06 and he doesn't seem to have any trouble..

Yesterdey before reboot date was corectly.

cause ntp has already resync the time..

u try power off and power on with out internet see if the time sticks or not

when the router reboot the time = 1970 after internet connection is available the ntp will update..

that is what i notice...

you running which ros version ? 5.12 ? or 5.14 ?

firmware is latest ?

2 hours ago, while I was out, the RB751U-2HnD decided to reboot itself. I wonder what happened. At that time I only had one Mac connected to it downloading 3 torrents simultaneously (part of my stress test). I wasn't home but got notification of it when it emailed me its new IP address. what error ...

hey just

just an update from support..

i've been told to

"I've asked to uninstall User Manager package. Disable all rules at /system logging , and /system script, if CPU load is still high."

won't be free to test this out, will test it out later and update you guys

have you made that support output file while you are using RouterOS v5.13 and the cpu usage is close to 100%? Send that file to support@mikrotik.com done.. sent the supout.rif files to support already... Ticket#2012022166000052 please note that im using 5.12 didnt upgrade to 5.13 yet.. if you need ...

Disable the 'calea', 'ntp' and 'lcd' packages, and see if the NAND problem goes away. Especially the 'ntp' package.

kinda doubt those packages are using the flash....

anyway how do i read/open the supout.tif file ?

is there a reader that i can use ?

They got back to me to say they couldn't reproduce the problem. I should try a different PSU (tried many with no difference) or a different unit (not easily possible for me) and then report back. I'm using a separate (non mikrotik) wireless access point and having no troubles now. damn that sucks, ...

packge.png i've disabled all the other packages which i don't use.. and im still getting high load on flash.. when i run through my export.. there is nothing that indicate anything that would be using the flash... any idea.. how much does it cost to log a case(this case) with mikrotik if i didnt bu...

hey guys just to check with you all, i came across this screenshot

why is his local bridge l2 mtu = 2290 same as his wifi...

but on my end screenshot post #1, my l2 mtu is 1594

forces2010 - I am having a similar problem to you, which I have documented here - but basically when I use wifi and a skype call, I get high 'flash' usage, and I have not been able to get to the bottom of the issue. I will be watching this thread with interest. yeah.. through all my experience trou...

@forces2010 Not connected master port always shows 10Mbit, half-duplex. Your screenshot shows that you have over 120.000 NAND writes. I dont know what is your RB total uptime but as some comparison, RB750 which is running over two years has 3.500.000 writes. As I wrote earlier something writes your...

and i've notice a "Weird" problem why has it rebooted and my int2 went to 10mbits mode ?? There is problem with cable to ether2. Try to change it the thing is.. my cables are connected to eth1, eth3, and etc5 eth2 is a master port with eth3 and eth4 its slave.. so there is no reason for t...

just did the /sys disk-check and i've notice a "Weird" problem why has it rebooted and my int2 went to 10mbits mode ?? 10int.png 10mbits.GIF not sure if it has solve my cpu problem, will monitor/watch it again it the afternoon a note on the 100% cpu usage, when my file(window) is winbox is...

perhaps you should

Code: Select all

/sys check-disk

the router will reboot once you apply it

okie will try and and get back to you

thanks for helping

'Flash' process is writing to flash memory (NAND). Check your settings about logging/graphing. Something is permanently writing NAND, also check in Winbox System/Resources/Total Writes. HTH, well logging.. i only have the standard login and also a duplicate of some to forward it to a syslog server ...

hi guys.. need some help here.. i've recently bought a mikrotik RB751U-2HnD and i'm getting some weird problems.. 1. winbox lag when trying to login 2. high tx drop on certain interfaces.. 3. 100% CPU spike continues.. 4. "patterned" drop on my bandwidth/interface i would like to first tro...

hi guys, i've configure my rb750 for traffic flow..and i'm using PRTG freeware (10 sensors) the ether1-gateway is connected to my VDSL modem which is connected to my isp... but when i check in winbox traffic flow settings , status.. there is no flows, i even wiresharked my target computer and there ...

hi all....well i got it to work.. on my RB250 side , 1 port for trunk to link to the rb750 , 3 ports for lan over vlan1, while 1 port for iptv over isp's vlan600 here is the configuration im using for my rb750, that seems to work, but i'm not sure if its the proper way to configure it.. http://forum...

via dsl....

VSDL >> Residential Gateway >>>ether >> RB750

anyway guys... i reconfigure my rb750 from scratch and the problem went away.. not sure what causes it in the first place...

nvm i found a way that works.. but not sure if its the most efficient way...

create vlan200(yellow) on ether1 and 5
create a bridge and bridge them both, the vlan not the ether interface

while vlan1(black) create a bridge and bridge it to a ether2/masterport

hi guys just want to know i have a trunk with vlan100(green) and vlan200(yellow) coming into my rb750 ether 1 Drawing2.gif while my default network is on the default setting which i assume is vlan1 i have another trunk out of ether 5 that should trunk out vlan1(black) and vlan200(yellow) while my vl...

hi guys i'm having problem with my vlan setup... for my rb750 & rb250gs my network is as below... Drawing1.gif my rb750 has default ip of 192.168.88.x my interfaces & vlan as below.. interface.gif int_vlan.png my pppoe dailer is attached to vlan500 which is attached to the gateway port of th...

hi guys, i'm currently using RB750 as a standard router replacement... the problem i'm having is that it seems that my pppoe session already terminates itself abt 8 to 9 mins in... the funny thing is when im using other router eg dlink dir615 the pppoe session stays connected i've attached some part...