I found the Problem - every day MT himself erase ALL subdirs (with all files) on plugged microSD-card. Have RB1100AH with plugged microSD (8Gb) into slot, using for store boot-images, boot-configs files - receives by client's computers when booting via bootp+DHCP+tftp (all at this MT-routerboard). I...

Subj! I have the Windows Server 2008 Standart and home machine with WinXP. WinBox v2.2.18 .... When I run this version at Windows Server - then it's run, but no connect to MT with ROS v5.14 (I can't check with other version of ROS at this moment). Visually - click "connect", WinBox load a...

Subj! I have the Windows Server 2008 Standart and home machine with WinXP. WinBox v2.2.18 running at WinXP without any problem - I can connect to any MT in list (with ROS v5.14 at RB1100AH, RB1100, RB600A, DualCore-x86). When I run this version at Windows Server - then it's run, but no connect to MT...

nobody not says..

Many the modern management switches now present the "Auto VoIP vlan" feature. That is based on ACL-class with MACs. It GOOD, VERY good idea - the classify of packets per MAC, not by protocol and other properties. Please, we want this feature in MT ROS - it's so simple to mark packets and c...

Hi AlxFirst, 1. What is RMS? Sorry - mistake. "RPS" of couse :) System->Resources->RPS (Presented at all multi-cores system). 2. When I`m using dynamic simple queues, forward chain of packet marks doesn`t pass over simple queues. I use marked packets for queue tree, that pass over simple ...

upgrade my two routers-x86 (dual-core) from 5.7 to 5.12 - 3 days, all is right. Using bgp, queue-tree, mangles, nat, mpls, gre-tunnels - all works fine (at one router - 350-450 Mbit transfer, and 40-70 Mbit at other). Hi AlxFirst, How is your packet loss and latency, when using mangle, queue tree a...

Hi AlxFirst, How is your packet loss and latency, when using mangle, queue tree and traffic exceeds 200Mbps? I have problem with my 8core x86 and RB1100AHx2. When using queue tree with prerouting marked packets and traffic exceeds 150Mbps, there is very high latency and packet loss occurs for prero...

This is strange a little bit users for this hardware and software.Alright how many traffic is the maximum for this router (1100ahx2)? An example - one RB1100U can thru around 10-15Mbit per each 10% cpu usage with queue, nat, static routes. RB1100AHx2 more powerfull - *2 than simple (old) RB1100U - ...

Problem not in IRQs - problem with you queue configuration. May be one rule is broken I've can hang up the cpu (at x86 and at RB1000) with creation queue-tree rule with no parameters (click add and click OK)

I think, You must check all rules in queue config

I'm don't understanding this strange graphs with CPU-usage - without traffic - big pick on graphs, under traffic - all is OK with this - You can see it at the screens you have BW increase and similar CPU usage increase. Just gradually increase the traffic and you will see how things change. cpu usa...

Do you have anything in the log from the time of the spikes? Any connection attempts of any sort? And/or what would this graph be if you disabled a bunch of servies you didn't use, like web and ftp ? Log is clear (only about my access to WinBox). For control of MT I'm use only WinBox - all other se...

upgrade my two routers-x86 (dual-core) from 5.7 to 5.12 - 3 days, all is right. Using bgp, queue-tree, mangles, nat, mpls, gre-tunnels - all works fine (at one router - 350-450 Mbit transfer, and 40-70 Mbit at other).

per USER??? 8-j 600*30Mbps.. it's around 18Gbps :) I think, this router not do the the full 10Gbps routing at all 13x1Gbit ports with pppoe+bandwidths(queue+mangles). As example: 250Mbps channel (full duplex in+out=500Mbit) (average load 60-70% - total bandwidth around 300-400Mbit) eat fully (averag...

Upgrade my RB1100 (Unit) to 5.12 from 5.7 (some months)->5.11 (2 weak)->5.12. This routerboard now in test-stand without any strong traffic, prepare for working for queue-trees, two uplink, bgp, nat, mangles, etc. And at now a see some problem with CPU usage (remember - NO traffic! - only some tests...